SPL REPAIR TO OFFRS MD ACCN BLDG NO NP39 NP40 AND ADDN ALTN OF BATHROOM OF BLDG NO NP 24 (1 to 8) UNDER GE (WEST) FEROZEPUR CANTT

Taking down Chowkhats or frames with shutters (without taking of shutters from the frame) not exceeding 1.50 Sqm each of doors /windows complete all as specified and directed.

Taking down Chowkhats or frames with shutters (without taking of shutters from the frame) exceeding 1.50 Sqm but not exceeding 4.00 Sqm each complete all as specified and directed.

S&F 105mm x 60 mm size pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F 125mm x 60 mm size pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

Material and labour for providing cement concrete 1:2:4, type B0 (using 12.5 mm graded stone aggregate) as in door and windows frames, any size, single or double rebated, including ar rangement for fixing of hinges and fixtures as required complete all as specified and directed.

S&F 2nd class hard wood 35mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S&F 2nd class hard wood 30mm thick glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge,etc sizes of member of shutter as specified SSR part-I Section 8 clause 8.24 (a) and fitted to chowkhats complete all as specified and directed.

S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) ( printed with wood grain (colour as approved ) consisting of frame made out of MS tubes for top and bottom rails , MS frame shall be covered with heat moulded wood grain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and colour PVC sheet for top rail, lock rail, and bottom rail on either side and as gap insert for top rail and bottom rail . Panelling of prelam PVC sheet used instead of wood grain PVC sheet. Stiles and rails feathered at edges the MS frame welded / sealed to the stiles and rails with 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading complete all as specified and directed.

S&F 100 mm long butt hinges, medium weight, cold rolled mild steel, and fixed with screws complete all as specified and directed.

S&F aluminium anodised 200mm long barrel tower bolts of extruded section and fixed with screws complete all as specified & directed.

S&F extruded aluminium alloy handles, 200mm size fabricated type complete all as specified and directed.

S&F extruded aluminium alloy handles, 125mm size fabricated type complete all as specified and directed.

S&F 300 mm mild steel ordinary rat tail spring including roller and roller platecomplete all as specified and directed.

S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F Auto close type brass/ Stainless steel hinges 150 mm size complete all as specified and directed.

S&F Extruded brass handles, 125 mm of fabricated type polished complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premisescomplete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor not exceeding 15cm thickness (below or above ground level) and removing the demolished material and debris out side of MD land complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate ) in floor sub base etc complete all as specified

M&L 25 mm thick PCC type B1 1:2:4 (20 mm graded crushed stone aggregate) as in flooring etc. complete all as specified and directed.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, infloors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L Vitrified ceramic (light shade) coloured tiles 10 mm thick ( square/rectangular) polished, area of each tiles not exceeding 0.36 sqm laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality complete all as specified and directed.

All as per Srl item No 23 here-in-before but as in skirtings fixed on 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L glazed ceramic coloured tiles 350mmx 250mm / 450mmX 350mm & 7mm thick on vertical surfaces such as dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in surface channels and drains etc complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane obscured or frosted on one side complete all as specified and directed.

S&F framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors framed balausters, walk ways, railings, frame work of water tanks and similar works conforming to Fe 290, Gde - E-165 complete all as specified and directed.

M&L Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a shop coat of primer complete all as specified and directed.

M&L Preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a shop coat of red oxide priming complete all as specified and directed.

S&F in repairs stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, connecting union overall size 915mm X 460mm with bowl size 410mm X 330mm X 160mm complete all as specified and directed.

S&F in repairs Stainless steel sinks made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers& waste pipe, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm X 420mm with bowl size 410mm X 330mm X 160mm complete all as specified and directed.

S&F in repair vitreous China wash down water closet pan (White) one piece of Size 680mm x 370mm x 750 mm with integrated cisteren, seat cover and twin flush settings including soft close seat cover and connection to drain complete all as specified and directed. Makes :- Prayag (PICASSO) or equivalent in approved makes.

S&F in repair vitreous China squatting pan, ' Orissa patteren, size 580mm x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) complete all as specified and directed.

S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed.

S&F in repairs, vitreous china wash basin white (Half padestal type) of size 550mmx400mm with brackets including cutting for and pinning in ends of brackets or erecting stand including waste coupling complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repairs 15 mm CP Central Hole basin mixture with 450 mm braided connection pipe (without pop-up) including all fittings complete all as specified and directed. Makes - Prayag or equivalent in approved makes

S&F in repairs 15 mm CP Wall mixture (wall mounted) with bend pipe for overhead showers connecting legs and wall flanges including all fittings complete all as specified and directed. Makes - Prayag or equivalent in approved makes

S&F in repairs CP Sink mixture 15 mm (wall mounted) with swivel spout, connecting legs and wall flanges including all fittings complete all as specified and directed. Makes - Prayag or equivalent in approved makes

S&F in repairs CP Bib cock 15 mm with flange and aerator complete with all fittings complete all as specified and directed. Makes - Prayag or equivalent in approved makes

S&F in repairs CP Angle cock 15 mm with wall flange complete with all fittings complete all as specified and directed. Makes - Prayag or equivalent in approved makes

S&F in repairs CP Concealed stop cock 15 mm with adjustable wall flange complete with all fittings complete all as specified and directed. Makes - Prayag or equivalent in approved makes

S&F in repairs CP Over head rain shower - ABS type Square 180mmx180mm complete with all fittings complete all as specified and directed. Makes - Prayag or equivalent in approved makes

S&F in repairs CP Health Faucet ABS body (Push type) with wall hook and 1.0 mtr SS Braded rubber hose pipe complete all as specified and directed. Makes - Prayag or equivalent in approved makes

S&F in repairs CP Toilet paper holder with flap guard complete all as specified and directed. Makes - Prayag or equivalent in approved makes

S&F in repairs CP Tumbler with holder Glossy finish complete all as specified and directed. Makes - Prayag or equivalent in approved makes

S&F in repairs CP Towel rack with hooks 600 mm long with brass finish and glossy type complete all as specified and directed. Makes - Prayag or equivalent in approved makes

S&F in repairs CP Towel ring complete all as specified and directed. Makes - Prayag or equivalent in approved makes

S&F in repairs corner glass shelf 300 mm with ABS brackets 300mmx600mm complete all as specified and directed. Makes - Prayag (ABS Bracket) or equivalent in approved makes

S&F in repairs CP Soap dish complete all as specified and directed. Makes - Prayag or equivalent in approved makes

S&F in repair PVC cabinet mirror of size 450 mmx 600 mm complete all as specified and directed. Makes- Prayag or equivalent in approved makes

Taking up or down steel /UPVC water tubing and connections,15 mm bore ccomplete all as specified and directed.

Taking up or down steel /UPVC water tubing and connections,20 mm bore complete all as specified and directed.

S&F 15 mm water tubes, 'Meduim grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 15 mm bore UPVC pipe Schedule 80 incl all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20 mm water tubes, 'Meduim grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M&L cutting, chasing pinning in making good to facings where required and poinnting in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves ,lintels etc and cutting chase for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth in brick wall complete all as specified and directed

Demolition and breaking up drain pipes upto 110 mm dia (Salt glazed ware, AC, PVC or reinforced concrete) set in cement mortar under floor / fixed to walls etc complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in trenches complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore dia of outlet of pipe complete all as specified and directed.

S&F in repairs PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement and making good of disturbing gound with PCC 1:2:4 complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including pillar etc. complete all as specified and directed.

M&L brick work with burnt Bricks type "B" bricks straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L Brick work with sub class "B" bricks straight or curved on plan to any radius in half brick thick walls built in cm 1:4 complete all as specified and directed.

Taking down plastering in cement mortar on brick or stone wall/ ceilings etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L rendering 15 mm thick in cement mortar 1: 4 on other than fair faces of brick masonary surfaces finished even and fair without using extra cement with water proofing compound complete all as specified and directed.

M&L rendering 15 mm thick in cement mortar 1: 6 on fair faces of brick masonary surfaces finished even and fair without using extra cement, complete all as specified and directed.

All as per Srl Item No 76 here-in-before but 10 mm thick rendering on ceiling surfaces in cement mortar 1:3 complete all as specified and directed.

M&L providing, cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate ) as in coping on brick walls etccomplete all as specified and directed.

M&L applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces / old pre[ared surfaces after complete removal of existing treatments etc complete all as specified and directed.

M&L applying two coats of OBD over a coat of primer over a coats of wall care putty (01 mm thick) including preparation of new plastered wall surfaces complete all as specified and directed.

M&L applying two coats of OBD over a coat of primer over a coats of wall care putty (01 mm thick) including preparation of newly plastered ceiling surfaces complete all as specified and directed.

M&L complete removal of existing treatment and applying two coats of oil bound distemper over a coat of primer over 2mm thick (average) wall care putty applied in two coats including rubbing with siutable sand paper achiving smooth surfaces complete all as specified and directed.

Dismantling brick tiles or terracing tiles laid in single layer on roofs jointed and pointed in cement mortar complete all as specified and directed.

Demolition of mud phuska in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) to maintain the slope on roof complete all as specified and directed.

M&L rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces of roof complete all as specified and directed.

M&L for water proofing treatment to roof surface including parapet wall comprising with the following course of treatment/ specifications form bottom to top:- (a) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per sqm over a coat of bitumen primer @ 0.30 ltr per sqm including preparation of roof surfaces complete all as specified and as directed. (b) One layer of APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. Polymeric membrane shall be taken to a height of 60 cm (minimum) and then inserted inside the groove of parapet walls and shall be finished by a membrane flashing. Note: (i) Laying of APP based membranes shall be done by torch on method or as per manufacturer's instructions. (ii) A minimum overlap shall be 75mm length wise and 100 mm width wise of polymeric membranes respectively and sealed all overlaps and joints as manufacturer's instructions.

S&F applying two coats of aluminium paint on APP roof treatment complete all as specified and directed.complete all as specified and directed.

M&L 75 mm thick cement concrete 1:3:6, type C-2 (using 20mm graded stone aggregate) as in plinth protection, shall be laid in 1:20 slope. The concrete shall be laid at a stretch not exceeding 3-meter in length. Joint gap between the adjoining slab, at corners and at junctions of wall shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen of grade 85/25 garde mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3-meter interval at corner and junction walls complete all as specified and directed.

M&L providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand andcutting of paver blocks as per required size and pattern, finishing and sweeping extra sand and color & shape shall be approved by Engineer-in-charge, complete all as specified and directed.

M&L providing, cement concrete 1:2:4 , type B-1 (using 20 mm graded stone aggregate) as in roof kerbs or mud stops, sides of footpath and paved areas etc. rounded or chamfered on edges complete all as specified and directed.

M&L providing precast cement concrete 1:2:4 type (B-1) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string , Beams, cantilevers, bressummers, lintels over 1.5m span set in cement mortar 1:6 including form work complete all as specified and directed.

M&L Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

M&L Mild steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

Demolition of cement concrete (reinforced) (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for and removing the demolished material and debris out side of MD land complete all as specified and directed.

S&F Wire netting / chicken wire net of stainless steel wire 1.4mm dia and 20 mm mesh size fixed with tinned tacks of stainless steel wire staples etc in plastering work complete all as specified and directed.

S&F in repair 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe incl dismantling existing water storage tank complete all as specified in SSR Part-I complete all as specified and directed.

S&F in repair 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe incl dismantling existing water storage tank complete all as specified in SSR Part-I complete all as specified and directed.

S&F in repairs for Gun metal globe or Gate valve 15 mm size with iron wheel screwed both end for iron pipe and fixed complete all as specified and directed.

S&F in repairs for gun metal globe or gate valve 20 mm size with iron wheel screwed both end for iron pipe and fixed complete all as specified and directed.

Dismantling of boarding, any description, fixed in any position with nails complete all as specified and directed.

M&L medium density fibre board interior grade 18-20 mm thick solid construction type, fixed in mrepairs in Kitchen cabinets/ CBs doors shutters/ shelves ( horizontal or vertical of any type) on timber frame work /GI Flats orners with screws /nails complete all as specified and directed.

M&L 0.90 mm thick Decorative laminate type -1, both sides of boards surface finish, (colour and pattern as approved) fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S&F 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on PVC Wall Lining, Insulated PVC Wall Lining, and PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and directed.

Demolition of ceiling boards of any description, and any thickness including cover fillets and frame work complete all as specified and directed.

M&L GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete , all as specified and directed.

M&L fancy designed 6 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid (frame work for ceiling shall be measured and paid separately) fixed to GI frame work in ceiling and all other similar works complete all as specified and directed.

Material and labour for applying bond coat of epoxy bonding agent & cement mortor in 1:1 ratio for bonding old and new concrete on damaged surfaces applying ready mix polymer modified mortar upto 60mm thickness (Chajjas fins, border,slab, beams etc) :- (i) Including application of rust remover on exposed reinforcement and subsequent application of anticorrosive coating. Also, pressure grouting with epoxy injection after application of polymer modified mortar. (ii) Use of electrical mixer to get the homogeneous dough on bond coat surfaces. (iii) To achieve required thickness repeat this step after 24 hrs as required. (iv) Keep the surfaces moist using water forg for 5 to 7 days etc complete all as specified and as directed. (v) Rate shall be inclusive of all necessary scaffolding for building height up to 24 meters complete all as directed by Engineer-in-Charge. Make of Chemicals : - Epoxy bonding agent, Rust remover, Anti corrosive coating, Polymer modified mortar, Epoxy grout shall be of Berger Krishna/Dr Fixit/MC Bauchemie & M/s Cemistik/Sika or Equivalent as approved by GE. Notes : (i) Complete treatment to be executed by approved applicator (Applicator to be approved by GE). (ii) The Contractor and manufacture of polymer modified mortar shall give the warranty before commencement and also for the strengths achieved in the post completion of work. (iii) The chemicals to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (iv) Hard drawn steel wire fabric will be measured and paid seperately.

S&F hard drawn steel wire fabric not exc 4 kg/sqm cut to lengths, wire mesh to be fixed and firmly anchored to the concrete surface by means of 'L' shaped mild steel shear key welded with existing reinforcement including cost of material, labour, tools and plants incl welding/L-clip/tying with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.

S & F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, valley gutter and similar works fixed with self tapping screws all as specified.

S & F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, valley gutter and similar works fixed with self tapping screws all as specified.

Demolition of un-reinforced cement concrete in any position complete all as specified and directed.

M&L 50 mm thick cement concrete 1:3:6, type C-2 (using 20mm graded stone aggregate) as in plinth protection, shall be laid in 1:20 slope. The concrete shall be laid at a stretch not exceeding 3-meter in length. Joint gap between the adjoining slab, at corners and at junctions of wall shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen of grade 85/25 garde mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3-meter interval at corner and junction walls complete all as specified and directed.

Resecuring or easing & adjusting, without taking down Shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and directed.

S&F Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2004) complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S&F in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified and directed. Makes: Rajshri or equivalent in approved makes

S&F PTMT tower bolts, 200 mm long and fixed with steel screwscomplete all as specified and directed.

S&F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin ccomplete all as specified and directed.

S&F PTMT handle 125mm long fixed with steel screws complete all as specified and directed.

Hacking out old broken glass (any thicknesss, size,quality or description) not exceeding 1.50 Sqm from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3.00 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L rendering 5mm thick in cement mortar 1:3 on fair faces of concrete finished even and fair in ceilings complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L applying two coats of cement based paint over a coat of alkali based primer including preparation of newly plastered wall surfaces complete all as specified and directed.

M&L complete removal of existing treatment over wall and applying two coats of distemper oil emulsion over 2mm thick wall care putty complete all as specified and directed.

M&L preparation of old treated plastered surfaces including complete removal of existing treatment and applying two coats of cement base paint complete all as specified.

M&L white wash in two coats on old plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

S&F galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.

S&F 15 mm bore Unplasticiscd PVC pipes of pressure rating 10 kgf/cm2 laid in trenches complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified.

S&F in repair Low level flushing cistern, PVC (white), 10 liters capacity, with inlet ball float valve, PVC flush pipe and necessary fixing accessories including connecting to existing water pipe and WC etc cement mortar

S&F in repair 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified in SSR Part-Icomplete all as specified and directed.

S&F in repair stop cock/angle valve fancy type, chromium plated screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union of 15 mm borecomplete all as specified and directed.

S&F in repair bib tap of cast copper alloy brass 15mm bore, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule ccomplete all as specified and directed.

S&F 125mm dia PTMT grating fixed over trap with cement complete all as specified and directed.

S&F 600mm long towel rail of PTMT fixed to wall with steel screws and PVC rawl plug complete all as specified and directed.

S&F 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed as in repair complete all as specified and directed.

S&F Soap dish of PTMT fixed to wall with steel screws and pvc rawl plug complete all as specified and directed.

S&F in repair Viterous china wash basin, white/coloured, flat back, size 550mmx400 mm including PTMT waste fittings, 32mm bore size, waste pipe pvc 32mm bore and angle iron brackets of required size and length etc and making good distrubed surfaces to match with the existing complete all as specified and directed.

S&F in repair vitreous china squatting pan, Orissa pattern, size 580mmx440mm white/ coloured with integral foot rests including flus pipe and connection to trap, and to flushing pipe, anti-syphonage pipe, etc.complete all as specified and directed.

S&F in repair Vitreous China, semi-pedestal pattern (Anglo-Indian Type) and to flushing pipe, anti-syphonage pipe, etc. complete all as specified and directed.

S&F 125 mm dia CP brass shower rose with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45 degree with flange of CP brass as in repair complete all as specified and directed.

S&F in repair sheet glass assembly consisting of 5.5 mm thick sheet glass shelf 12 mm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) bends and provided with access door complete all as specified and as directed.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) bends any radius 75mm dia complete all as specified and directed.

Taking down carefully copper /aluminium point wiring (light, fan, socket or power ) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keetping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M&L Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including rigid non-metallic PVC conealed conduit, with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and existing MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Point controlled by one single pole one way switch.

(b) One socket outlet on the same board controlled by one single pole one way switch

(c) One 5 amps socket outlet independent controlled by one single pole 5 Amp switch.

All as per Srl Item No 152 here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete all as specified and directed.

S&F Switch piano flush type single pole one way 5/6 Amp complete all as specified and directed.

S&F Switch piano flush type 15 Amps, single pole one way duly ISI marked complete all as specified and directed.

S&F Socket outlet 2 in one , 5/6 Amps flush type ISI marked complete all as specified and directed.

S&F Socket outlet, 2 in one 6 pin 5 and 15 Amps piano flush type ISI marked complete all as specified and directed.

S&F bell push flush type 5 Amps duly ISI marked complete all as specified and directed.

S&F ceiling rose, PVC/Polycarbonate,isolated three terminals complete all as specified and directed.

S&F Lamp holder PVC/Polycarbonate,isolated with back plate suitable for batten fittings including 10W LED Bulb complete all as specified and directed.

S&F bell ding dong type AC 230 Volt single pole complete all as specified and directed.

S&F in repair stepped type electronic fan regulater flush type on the existing phenolic laminated sheet etc. as reqd complete all as specifed and directed.

S&F LED tube light fitting 1X18 W decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Makes:- Cat Part No LHEXBLP7UN1W018 of make "Havells" equivalent in approved makes.

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed.

S&F sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series TPN DBs (Vertical type)fitted with ABS frame and 415 volts 200 Amps rated enameled bus bar 4 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed.

S&F sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired SPN DBs, 240 volts 200 Amps rated bus bar,Neutral link,Earth bar and Din rail, 8 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed.

S&F MCCB 100 Amps, 415 volts, 16 KA, 4 Pole complete all as specified and directed.

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 40 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified.

S&F SPN 32 AMP amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S&F Sheet Metal Enclosures with Socket plug top and MCBs Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amp complete all as specified and directed.

S&F in repair sub main wiring of 4 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor with earth wire of 4.0 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor including PVC conduit pipe 25 mm dia complete all as specified and directed. Note: Two run of single core 4 sqmm cable and one run single core 4.0 sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length.

M&L sub main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2 x 6 sqmm drawn through in and including PVC Concealed with 1 x 6 sqmm PVC insulated copper conductor single core for continuous earthing complete including PVC conduit 25 mm dia complete all as specified and directed. Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0 Sqmm and one run of 6.0 Sqmm PVC insulated copper conductor single core,one run of PVC conduit shall be measured as single run)

M&L Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm & 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate, excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009) complete all as specified and directed.

Supply, laying, testing and commissioning of cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (Heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 Sqmm 4 core complete all as specified and directed.

S&F Mild steel galvanised iron pipe light grade (ISI marked) 40mm bore for passing of earth lead laid in trenches fixed to walls laid under floors, roads including all fittings i.e MS clamps nuts & bolts etc acomplete all as specified and directed.

Please Enable Macros to View BoQ information