Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.8 LAccepted-AOC KALIBARI ROAD TINSUKIA TINSUKIA ASSAM 786171 | TINSUKIA | ASSAM | 786171 | L1 | Accepted-AOC Being lowest tenderer | |
| 2 | L2₹18.3 L+₹1.1 L (6.17%)Rejected-Finance MILLONALLY LANE 3 POST TINSUKIA ASSAM PIN 786125 | TINSUKIA | TINSUKIA | ASSAM | 786125 | L2 | Rejected-Finance Due to higher rates |
Tender Value
₹15.8 L
EMD Value
₹31,600
Closing Date
17 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE LEKHAPANI
TINSUKIA, ASSAM
PROVN OF TOILET BLOCK NEAR OFFICE COMPLEX AND ADDN/ALTN IN BLDG NOS P-18,P-19,P-28 AND P-29 AT MIL STN LEKHAPANI
2022_MES_552488_4
8691/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE LEKHAPANI
Class E and category a (i)
4 documents required · 4 mandatory
₹500
GE LEKHAPANI
₹31,600
Yes
30 Jan 2023
19 Dec 2022
20 Jan 2023
19 Dec 2022
17 Jan 2023
26 Dec 2022
Amount
Surface excavation not exceeding 30cm deep but averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation getting out soft loose soil complete all as specified and directed.
Excavating over areas n exc 1.5 m deep and getting out in soft/loose soil, complete all as specified and directed.
All as per item No.3 above but exc 1.5 m deep but n. exc 3 m deep complete all as specified and directed.
Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed..
Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
M&L PCC (1:4:8), type D-2, (using 40mm graded stone aggregates) as in foundations, filling, mass concrete etc complete all as specified and directed.
M&L PCC (1:2:4), type B-1 (using 20mm graded stone aggregate) as in bed plates and similar articles including necessary form work complete all as specified and directed.
M&LPCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in parapets, wall copings, including use and waste of form work complete all as specified and directed..
M&L PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.
M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.
M&L for loose filling with broken brick aggregates of gauge 40 to 80mm in soakage pit, soak well etc complete all as specified and directed
M&L Providing RCC M-25 (Design mix) (using 20 mm graded stone aggregate) as in beams, cantilevers bressummers lintels over 1.5 m span,etc complete all as specified and directed.
M&L Providing RCC M-25 (Design mix) (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floor roof, landing , slabs of septic tank,soakage wells,etc complete all as specified and as directed.
M&L Providing RCC M-25 (Design mix) (using 20 mm graded stone aggregate) as in as Retaining walls and the like etc complete all as specified and directed
M&L Precast RCC (1:2:4) type B-1(using 20mm graded stone aggregate) as in as cover slabs for manholes, septic tank, soak well etc set in CM (1:4) with plain fair faces incl chamfered, weathering, throating etc incl necessary use & waste of form work complete all as specified and directed.
M & L 25 mm thick Damp proof course to horizontal or vertical surfaces using with PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) and mixed with integral water proofing compound incl necessary formwork complete all as specified and directed.
Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels. Cantilevers, shelves including supports, overhangs, etc also splays between floor and beam etc for rough finished flat surfaces of cocrete complete all as specified and as directed.
Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick, for rough finished flat surfaces of concrete complete all as specified and as directed.
Use and waste of form work formwork to faces of walls, etc with rough finished flat concrete complete all as specified and as directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work & precast concrete articles complete all as specified and directed.
M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.
M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed.
M&L Brickwork with subclass ‘B’ bricks, straight for curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.
M&L Brickwork with subclass ‘B’ bricks, in one brick thick, honey comb walls built in CM (1:4) complete all as specified and directed.
Taking down chowkat or frame with shutters (without taking off shutters from the frame) not exceeding 1.5 sqm each and making good to disturbed surfaces complete all as specified and as directed by the Engineer-in-Charge.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete fixed to frames all as specified and as directed.
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and as directed.
S&F 150 mm size, aluminium anodised , barrel tower bolts of extruded section and fixed complete all as specified and as directed.
S&F 100mm butt hinges, type B-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised & fixed to PVC door complete all as specified and directed.
S&F 150mm size aluminium handles, cast type, anodized and fixed complete all as specified and directed.
S & F Aluminum powder coated (powder coated of required colour) three track sliding windows frame top & sides of size 92 x 31.75 x 1.50mm (section No 20831) bottom of size 92 x 31.72 x 1.50mm (Soction of 20832) and shutter top & bottom of size 40 x 18 x 1.55 (section 20738) and lock side shutter frame of size 40 x 15 x 1.45mm (Section 20737) with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 5mm thick glass with necessary rubber beading gasket etc complete all as specified and directed by Eng-in-charge.
S&F Steel ventilators with top hung shutter including hinges, steel peg stay,etc complete all as specified and directed.
S&F 3 mm thick figured glass , pin headed type and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified and directed.
M&L TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
All as per Item No. 35 above, but 8 mm dia complete all as specified and as directed.
All as per Item No.35 above, but 5 mm dia and over upto and including 10mm dia in stirrups, spacers and binders,complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
S&F Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 complete all as specified and directed.
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410 -W (GdeE- 250) quality A,complete all as specified and directed.
S&F Mild steel framed work such as griils, grating, angle iron door frames etc., with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, laders, framed balusters, walk ways, railings frame work of water tanks and similar work conforming to Fe-290. Gde E-165 complete all as specified and directed.
S & F Mild steel bolts with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut exc 30cm long and diameter of neck exc 12mm but n.exc 20 mm complete all as specified and directed
Dismantling of plain or corrugated steel sheeting any guage, thickness including Nanital or similar pattern roof coverings complete all as specified and as directed.
M&L for pre-painted hot dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed
M&L for pre-painted hot dip aluminium-zinc alloy metallic coated Plain steel sheet, any pattern corresponding to IS15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in Evas roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed
M&L Hardcore of broken stone boulder of gauge n exc 63 mm deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to true surface all as specified and directed.
M&L PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.
M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, marks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cuting of paver blocks as per required size and pattern, finishing and sweeping extra sandcomplete all as specified and directed. by Eng-in charge.
M & L 25 mm thick PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in floors complete all as specified and directed.
M&L Glazed coloured ceramic tiles in vertical surface 300x450x6 to 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles laid over & including 10 mm thick rendering as in backing coat wall plaster in CM(1:4) complete all as specified and directed.
M&L Coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile not exceeding 0.11 Sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes complete all as specified and directed.
M&L 75 mm thick PCC ( 1:4:8 ), type D-2 (using 40 mm graded stone aggregate), as in sub base of floor complete all as specified and as directed.
M&L 50 mm thick PCC ( 1:3:6 ), type C-1 (using 20 mm graded stone aggregate), as in plinth protection complete all as specified and as directed.
M & L Chequered cement concrete tiles cast in rubber moulded glossy finish of approved colour general purpose double layer 25cm x 25 cm x 22mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments, over and including 15 mm thick screed bed in CM (1:6) complete, all as specified and directed.
M/L 16-18mm thick Granite (of any type) work (table rubbed and polished) in steps, platforms and like in over 12mm thick CM (1:4) incl pointing in white cement (1:2) using marble dust with admisture of pigment to match with shate of granite complete, all as specified and directed.
M/L 16-18mm thick Granite (of any type) work (table rubbed and polished) in urinal partitions, skirting, dado wall linning and like in over 12mm thick CM (1:4) incl pointing in white cement (1:2) using marble dust with admisture of pigment to match with shate of granite complete all as specified and directed.
Rounding to edges of stone slabs one edge such as in steps, platform and similar situations,complete all as specified and directed.
M&L Rendering 10.mm thick plaster in CM (1:6) on fair faces of brick work or concrete surfaces including finishing top even and smooth without using extra cement complete all as specified and directed.
M&L Rendering 15mm thick in CM (1:4) on fair faces of brick or concrete surfaces in two layers 5mm thick finishing layer over 10mm thick backing layer finished fair and even with mixing water proofing compound to top layer as per manufacturers instruction and as directed. Note:WPC will be measured separetely as supply only.
Supply only Integral water proofing compound of approval brand complete all as specified and directed.
M&L Prepration of newly plastered surface of walls and applying two coats of cement base paint over a coat of primer and including 1 mm thick exterior wall care putty complete, all as specified and directed.
M&L Complete removal of existing treatment and prepration of plastered surface of walls and applying two coats of cement base paint over a coat of primer and including 1 mm thick exterior wall care putte complete, all as specified and directed.
M&L Preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.
M&L Rendering 5.mm thick plaster in CM (1:3) on fair faces of brick work or concrete surfaces in ceiling including finishing top even and smooth without using extra cement complete all as specified & directed.
M&L Preparation of new plastered surfaces of ceilings and applying three coat of white wash complete all as specified and directed.
M&L Preparation of old plastered surfaces of walls and applying two coats of white wash complete all as specfied and directed.
M&L Preparation of new steel and un treated iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paintover a coat of red oxide primer complete all as specified and directed.
M&L Preparation of old steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paintover a coat of red oxide primer complete all as specified and directed.
S&F GI pipe 15mm dia bore of pipes, (medium grade), galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
S&F GI pipe 20mm dia bore of pipes, (medium grade), galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
S&F GI pipe 20mm dia bore of pipes, (medium grade), galvanised iron, with all fittings/accessories like sockets, bend, elbow, union etc laying in trenches complete all as specified and directed.
M&L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth complete all as specified and directed.
S&F Fancy type long body 15mm dia Bib taps cast copper alloy, chromium plated screwed down to iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F Fancy type swan long neck 15mm dia pillar taps suitable for countershunk basin, cast copper alloy with capstan heads, chromium plated , screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipe & fixed complete all as specified and directed.
S&F Vitreous china wash down water closet, "Pedestal pattern with fixing bolt, plastic water closet seat cover, white, closed pattern with flat bottom and cover with aluminised hinging device, complete all as specified and directed.
S&F Vitreous china wash down water closet, "Orissa pattern, size, 580x440mm white, with integral foot rest (excluding flushing cistern and flush pipe) but including provision of P or S trap embedded in cement concrete bedding complete all as specified and directed.
S&F Wash basins white, vitreous China, Countershunk top oval shape , size 580x450mm, excluding taps, waste, chain and plug and porcelain stopper but including brackets fixed to wall complete all as specified & directed.
S & F Vitreous china urinal, half stall type, flat back, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar [1:2], securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, including 32mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, grating and union for discharge/waste pipe, CP screws etc complete all as specified and as directed.
S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60 gms) complete all as specified and directed.
S&F Towel Rail 600 mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms) complete all as specified and as directed.
S & F Health flucet 15mm dia with 1.5mtr CP flexiable pipe complete all as specified and directed.
S&F PVC High/Low level flushing cistern 10 litres capacity including all fittings i.e float valve, syphon, flush pipe, brackets all as specified and directed.
S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
S&F 15mm bore dia stop valves / angle valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tanks of 500 ltr capacity,(cylindrical vertical with closed top) double layered,hoisted and fixed in position all as specified in SSR part-I and as directed.
S&F 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe & fixed (Minimum weight 210 gms) complete all as specified and directed.
S&F 20 mm dia Gunmetal globe/gate valve with iron wheel head, screwed both ends, ISI marked,complete all as specified and directed.
S&F 5.5mm thick bevelled edge mirror fixed to wooden plugs with chromium plated brass catch nuts complete all as specified and as directed.
M&L 75mm dia PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, fixed to walls or laid in trenches or in floor complete all as specified and as directed.
S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, fixed to walls or laid in trenches or in floor complete all as specified and as directed.
S & F 110mm PVC (SWR) junction single (Single T) equal or unequal with access door complete all as specified and as directed.
S & F 75mm PVC (SWR) vent cowl complete all as specified and as directed.
S&F PVC (SWR) bends 110mm dia any radius all as specified and directed.
S&F PVC (SWR) bends 75mm dia any radius all as specified and directed.
S & F Salt glazed stoneware gully traps square or round mouthed type P of size 150 x150mm complete all as specified and as directed.
S&F PVC (SWR) pipes 160mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and as directed.
M&L PCC( 1:3:6 ), type C-2 (using 40 mm graded stone aggregate), as in bed to drain pipes of 150mm bore incl packing under and haunching against the sides of pipes after they are laid and testing complete all as specified and as directed.
M & L for concealed point wiring complete with two run of 1.5 sq mm FRLSH ,PVC insulated multi stranded copper conductor single core cable 1100 volts grade,drawn into non metalic PVC rigid conduit medium grade of size not less than 20mm dia and conduit accessories fixed in wall, floor and on roof etc. and including provision of PVC insulated 1.5 sq mm FRLSH, copper conductor for earth continuity and connected to common earth dolly for one light point controled by one one way 6 Amp switch,complete all as specified and directed by Engineer-in-Charge . Note :- Cost of PVC conduit, cutting chases of wall, making good disturbed wall surfaces including finishing with cement mortor 1:4, matching with existing colour/paint of surface are deemed to be included in the quoted rate.
S&F Modular switch one way 6 Amps 1 module including Modular PVC cover plate with frame & metal flush box of suitable size all as specified and directed.
S&F Ceiling rose surface type bakelite 65x50mm three terminal all as specified and directed.
S&F LED tube light fitting 4 ft. 1 x 18 watt with 230 volts, with bipin holder connector block, LED retrofit tube rod etc complete with all accessories internally pre-wired and fixed to walls/ceiling with screw on round PVC blocks including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.
S&F LED bldg security light fitting 25W watt with 230 Volts with IP 66 protection, High Impact resistance complete with suitable size GI pipe mounting bracket,02 x MS Flat size 40x3 mm clamp set, nut/bolt/washers etc all accessories internally pre-wired and fixed to walls complete all as specified and directed.
S&F Pressed sheet metal enclosure (MCB DB), single phase and neutral with 200 Amps rated bus bar, double door type, 240 volts including grouting in wall and connecting complete for 4 way complete all as specified and directed.
S&F MCB SPN 32 Amps, 230 volts AC and connecting using suitable size of wire complete all as specified and directed.
S&F MCB SP 6 to 32 Amps, 230 volts AC and connecting using suitable size of wire complete all as specified and directed.
Supply and spread river sand in trenches as cable cushioning 8 cm below the cables and 15 cm above the cable complete all as specified and directed. Note: Punned thickness shall be measured for payment purpose.
Supply and lay burnt bricks sub class 'B' standard size laid across the cable in trenches as protection to the cable all as specified and directed.
Supply,laying and testing of XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with glanded aluminium conductor of cross sectional area 16 sqmm 2 core laying or passing through pipe/wall/floor/trenchesall as specified and directed.
S&F GI pipe, 40 mm bore, (light Grade) incl all fittings with suitable nuts & bolts,clamps,etc for protection of cables laying in trenches/under floors or roads or along the pole complete all as specified and directed.
M&L Cutting existing steel tubing for alterations or additions (Each cut measured) of 20 mm bore all as specified and directed.
M&L Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) of 20 mm bore all as specified and directed.
M&L Earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate and 15 mm dia GI pipe (light grade) for earth lead protection pipe for suitable length and GI pipe 20 mm dia (light grade) for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 (using 20 mm graded stone aggregate) for earth pit and 40 mm thick pre-cast RCC cover in 1 : 2 : 4 type B1(using 20 mm graded stone aggregate) with using 3 Nos 8 mm dia TMT bars both ways,etc and testing on completion complete all as specified and directed by Engineer-in-Charge.
M/S D R GOPE
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .