SEWAGE CLEANING ,REPAIR TO MANHOLE, PETTY REPAIR AND DAY TO DAY COMPLAINTS OF MD AND OTM ACCN OF J-1 AND J-2 LOCATION UNDER AGE B/R-1 OF GE (E ) JRC

Amount

Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thickness (below or above ground level) complete .

Taking down of cement plaster on brick wall of any description thickness incl racking out joints, hacking for key scrubbing down with water and prepared to receive plaster complete all as specified .

M&L 15 mm thick plaster in cement mortar 1:6 on fair faces brick /concrete surfaces with finished even and smooth without using extra cement in patches n.exceeding 10 sqm including taking down plaster and racking out joints, hacking for key scrubbing down with water etc including two coats of oil bound distemper including prepration of new surfaces complete all as specified and directed.

M&L 15 mm thick plaster in cement mortar 1:4 on other than fair faces brick /concrete surfaces with finished fair and even without using extra cement in patches n.exceeding 10 sqm including taking down plaster and racking out joints, hacking for key scrubbing down with water etc including two coats of cement base paint including prepration of new surfaces complete all as specified and directed.

Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing ) removing rubbish outside MD land complete all as specified

M&L for Vitrified tiles (Premium Quality light shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile laid over and including screed bed or bedding layer 15 mm thick in CM (1:6) complete all as specified and directed. Make for Sr items No. 6 to 10:- Somany/Kajaria/Johnson

M&L for Vitrified tiles (Premium Quality light shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile laid over and including screed plaster 10 mm thick in CM (1:4) complete all as specified and directed.

M&L for non skid ceramic tiles/ non skid tiles coloured, (Premium Quality light shade) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as per the existing tiles and size as suitable/ matching with the existing tiles in dados/ floors including screed bed or bedding layer 15 mm thick in CM (1:6) complete all as specified and directed.

M&L for Non skid ceramic coloured tiles (Premium Quality light shade) 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed..

M&L for glazed ceramic coloured tiles (Premium Quality light shade) of size 450x300x 6 to 7 mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with & including rendering 10 mm thick cement plaster in cement mortar 1:4 finished rough to fix tiles complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work(table rubbed and polished)in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L for machine cut Kota stone slab flooring, 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing (granite finish) and exposed edges of Kota stone shall be rounded including 15mm thick screed bed to floor finishes in cm 1:4 complete all as specified and directed.

M&L 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in flooring for laying floor finish all as specified.

M&L for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded aggregate) in floor patch as directed by engr-in-charge.

M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) in lintels upto 1.5 clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers ,apex stones, bed plates, water troughs and the like including use of formwork (straight or curved) ,including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed

Demolition of cement concrete in ground floor and paving/as in sunken portion ( below or above ground level) all as specified

M&L for cement concrete type E - 2, 1:5:10 (using 40 mm graded brick aggregate) as in sunken flooring.

Water proofing treatment to sunken floors of kitchen, toilets, laboratories, bath and WCs etc shall be as under:- (i) The top surface of the sunken RCC slab shall be laid with cross slope as indicated in drgs towards the spouts. The min thickness of the RCC slab shall be as specified in drg.The plan area will be measured. (ii) PCC 1:1.5:3 fillets at corners with 12.5mm graded aggregate shall be provided. (iii) Plastering in CM (1:3) 15mm thick with WPC on walls as well as on sunken floor finished even and smooth using extra cement. (iv) GI Pipe 40mm dia medium grade be inserted at the end of lateral slope projecting at least 15cm beyond the outer most projected part of the building below the drain pipe upto two storey construction and 25cm beyond two storey construction. (v) After doing the plaster, testing be carried out by ponding (for 72 hrs) the sunken portion before further treatment to the sunken slabs. Any leakage/seepage observed shall be rectified before carrying out water proofing treatment. (vi) Two component Acrylic modiied Cementitious coating:-

(aa) The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil, surface treatments and old coatings. Concrete substrates must be mechanically prepared using abrasive blast cleaning or milling to remove cement laitance, existing coating and achieve a gripping profile that is clean, dry and free from laitance and dry other form of surface contamination. The installation instructions in manufacture's published literature should be strictly complied with, including but not limited to the following:- (bb) Chipping out any visible cracks in "V-Groove" pattern as applicable. Special attention on this part. Cleaning of cracks & then filling those cracks with SIKA latex SBR 100 putty/Dr Fixit 302 SBR latex/ Perma latex SBR/FOSROC Nitabond SBR latex/Asian paint latex as required. Final cleaning of surface with power grinder, wire brush, hair brush & vacuum pressure if required. (cc) Dampen all surfaces immediately ahed of application of Acrylic modified Cementitious coating of sika Top Seal-107/Brush Bond FOSROC/Dr Fixit/STP/CICO.

(dd) Whilst the surface is still damp from saturation (S.S.D), apply one coat of Acrylic modified cementitious coating of SIKA Top Seal-107 /Brush Bond FOSROC/Dr Fixit/STP/CICO of viscosity as per manufacturer's instructions. (ee) Apply glass fabric sheet of SIKA Fab 1/FOSROC/Dr Fixit/STP whilst the first coat is wet. (ff) Once touch dry, apply second coat of Acrylic modified cementitious coating of SIKA Top Seal -107 /Brush Bond FOSROC/Dr Fixit/STP/CICO of viscosity as per manufacturer's instructions on the entire area. (gg) Second coat shall be applied after 6-8 Hrs of application of previous coat and in the direction right angle to the previous coat. (hh) The waterproofing coating should be taken to a height minimum 300mm above the finished floor level on the vertical surfaces. (jj) It is essential to cure Acrylic modified cementitious coating immediately after application (minimum 6-8hrs drying) for a minimum of 3 to 5 days to ensure full cement hydration and to minimize cracking.

(kk) A protection plaster 12-15mm thick) in CM 1:3 admixed with appropriate integral water proofing compound has to be applied on the walls. Admixture: SIKA Plastocrete Plus/FOSROC/DR Fixit/STP/CICO conforming to IS 2645. Providing and applying a protection screed of 50mm thick 1:4, cement sand mortar admixed with SIKA Plastocrete over the applied water proofing coating on horizontal surfaces. Admixture: SIKA Plastocrete Plus/FOSROC/DR Fixit/STP/CICO conforming to IS 2645. (ll) All the corners and joints should be pretreated with an elastic waterproofing sealing tape with a woven bonding mesh on each surface and an elastic expansions zone in the centre of Make SIKA Seal Tape/FOSROC/Dr Fixit/STP. (mm) The membrane has to be protected in accordance with the manufacturer's recommendations until placement of concrete. The membrane to be inspected for damage just prior to concrete placement and make repairs in accordance with manufacturer's recommendations. (nn) Waterproofing treatment has to be carried out through applicators authorised by the respective manufacturer's and approved by GE. (vii) All the joints of pipes and traps within the sunken portion shall be sealed properly by epoxy sealent. (viii) All CI traps in sunken slab to be enclosed with PCC 1:1.5:3 (Min 15cm) all around.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as spcifed and directed.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails, post etc and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe-410-W(Gde-E-250 Quaity 'A' , complete all as specified and directed.

Dismantling of Asbestos cement (corrugated , semicorrugated , etc.) sheets as in roof coverings.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strenth of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws all as specified and as directed.

S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F 2mm thick fibre glass reinforced tranclucent corrugated sheeting with two corrugation side lap,fixed with coach screw and washer in roof,wall etc all as specified and as directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame), n. exc 1.5 Sqm, complete all as specified

Taking down chowkhats or frame with shutter without taking off shutter from the frame area exc 1.5 Sqm but n exc 4.0 sqm each and removal to store complete all as specified

Taking down shutters of n.exc 1.00 sqm each, complete all as specified and directed.

Taking down shutters of exc 1.00 sqm but n. exc 2.00 sqm each, complete all as specified and directed.

Easening of door exc 1sqm but not exc 2 sqm each by making ajdustment to hinges planning the sides of doors including taking down of door and refixing if required complete all as specified.

Petty repairs to PVC door shutter by making minor adjustment to hinges etc easening of shutter including taking down of shutter if required complete all as specified.

S & F 105 x 60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified

S & F 125 x 60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified

S&F 2nd class H/W plain solid straight chowkhat or frame, wrought framed rebated on the solid, rounded or chamfered put together with flue pinned at joints etc and in position .

S&F 35 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 25 mm thick flush shutter, solid core construction, with block board core and plywood face panels for cupboard/shelves, commercial type on both sides complete all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed or Skelton shutter factory made open rebated prepared to receive glass, gauge etc without sash bars edges of framing plain fitted with cut and mitered beads for securing glass etc size of member all as per clause 8.23 (a) of SSR Part-I.

S&F for 30mm 2nd class H/W glazed skelton shutter for window/ventilator, open rebated and prepared to receive glass , gauze etc (with sash bars) edges of framing plain chamfered or rounded , fitted with cut and mitered beads for securing glass etc; size of members of shutters as specified in SSR Part -I,section 8,clause 8.24 (a) complete all as specified and as directed.

M&L for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F Factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified , shown on drawing and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified.

S&F 100mm size MS butt hinges medium weight cold rolled (zinc cromate)., complete all as specified and directed.

All as per item No. 42 above but in repairs

S&F 100 mm butt hinges extruded aluminium alloy with mild steel hinge pin anodized and fixed.

Supply and fixing aluminium anodised barrel tower bolts of extruded section 100mm long, complete all as specified and directed.

All as per item No.45 above but in repairs

Supply and fixing aluminium anodised barrel tower bolts of extruded section 150mm long, complete all as specified and directed.

All as per item No.47 above but in repairs

Supply and fixing aluminium anodised barrel tower bolts of extruded section 200mm long, complete all as specified and directed.

All as per item No.49 above but in repairs

S&F Extruded aluminium alloy handles, fabricated type,anodised 100 mm in size, complete all as specified and directed.

All as per item No.51 above but in repairs

S&F Extruded aluminium alloy handles, fabricated type,anodised 125 mm in size, complete all as specified and directed.

All as per item No.53 above but in repairs

S&F Extruded aluminium alloy handles, fabricated type,anodised 150 mm in size, complete all as specified and directed.

All as per item No.55 above but in repairs

S&F Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 250mm long, complete all as specified and directed.

S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate in repair complete all as specified and directed.

Supply & fixed floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 140mm complete all as specified

All as per item No.59 above but in repairs

Supply & Fixed in repairs continuous (Piano) hinges, mild steel, bright finish or electro galvanised width of flaps 40 mm when open complete all as specified.

S&F for 100 mm size Hasp and staple, mild steel, safety type, stove enamelled black, including bolt to hinge plate and fixed with screws all as specified

All as per item No.62 above but in repairs

Tightening the loose wooden pelmet boxes made out of plywood/ block board with two new 2nd class hard wood plugs (gutties) of size 30 mmx 40 mm long embedded in cement mortar 1:3 and two providing new side MS clips and fixed with MS screws complete, the length of pelmet not exc 1.5 m complete all as specified.

Petty repairs to cup board (kitchen) including easining of cup board shutters including taking down and refixing in position of shutters drawers tightening of piano type hinges fixing of handles etc with drawers adjustment of ball catches etc (one unit shall comprises one cup board irrespectives in numbers of shutters and drawers) complete all as specified.

All as per ser item No. 65 above but cupboard (bedroom) excluding drawers complete all as specified.

S&F peg set of 06 Nos mild steel chromium plated 45 cm long fixed with Mild steel screws fixed in repair complete all as specified.

Taking down carefully and re-securing gents/ ladies dressing table fixed on wall including fixing of gutties completed all as specified.

Petty repair to existing steel window by welding hinges or removing the steel window shutters from the frame and re-fixing after making serviceable all as specified.

S&F in repair steel window handle MS painted with black japan left or right side complete all as specified and directed.

M&L in repair 25 mm dia mild steel pipe curtain rod , powder coated fixed with & including MS powder coated hooks/brackets and decorative finials (at both side), shade as approved by GE complete all as specified includng fixing of long size rawl plugs in wall complete all as specified.

S&F in repair 9 mm plywood, grade BWR type BB ( No. of ply 5) fixed with screw to timber frame or shutter any thickness complete all as specified.

S&F in repair 12 mm plywood, grade BWR type BB ( No. of ply ) fixed with screw to timber frame or shutter any thickness complete all as specified.

S&F 0.71 mm thick aluminium sheet as in covering to doors etc with steel screws complete all as specified.

S&F in repair 19mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads as directed.

supply and fix sheet glass ordinary quality 3.0 mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified.

Supply and fix sheet glass ordinary quality 4.0 mm thick in square exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified.

S&F Figured Glass 3.0 mm thick, Pin Head type and glazing with Wooden Beads or Oil Putty in Square or Rectangular, not exc. 0.50 Sqm, complete all as specified and as directed.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

All as per item No. 80 above but in repairs

Taking down aluminium door shutter including floor door closer, removing glass with beading before taking down and refixing of glass, beading and floor door closer after replacing broken parts of aluminium shutter including easing of shutter complete all as specified.

S & F for powder coated anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge

M&L for Mortice lock, vertical type, size 100mm 4 lever Brass body, complete all as specified and directed.

S&F 3 mm thick ACP wall panel plain colour PVC sheet fixed in bottom portion of aluminium door shutter complete all as specified and directed.

S&F 5.5 mm thick in square exc 0.50 Sqm each pane ordinary quality sheet glass for fixing in aluminium frame work including rubber beading and necessary clips,complete all as specified and directed.

S&F in repairs Door closer hydraulically of aluminium extruded section body regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified.

S&F for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, Complete all as specifed and directed.

Cleaning of air lock in GI pipe and making the water supply available upto water taps including attending the complaints of no water supply & rectifying defects in water supply lines complete all as specified.

Petty repairs to leaking bib cock, pillar cocks, Stop cock, angle valve of any description by changing the jumper valve, washers etc and making functional, ensuring proper water supply complete all as specified and directed by Engineer in charge

Petty repairs to leaking low level or high level flushing cistern by adjusting the float valves, internal fittings and including removal and replacement of rubber washer in PVC siphons, leaking PVC bends/GI pipes etc. complete all specified and directed by Engineer in charge

S&F in repair, bib taps, cast copper alloy, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed. Make:- Jaquar/Cera/ESS-ESS

S&F in repair stop valves 15 mm nominal bore, brass, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete, fixed in repairs, all as specified and directed .

S&F in repair angle valves 15 mm nominal bore, brass, chromium plated, complete, fixed in repairs, all as specified and directed .

S&F 15 mm bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms) complete, fixed in repairs, all as specified.

S&F 20 mm bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms.) complete, fixed in repairs, all as specified.

S&F 25 mm bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) complete, fixed in repairs, all as specified.

S&F in repairs PVC internal fittings for low level flushing cistern complete all as specified.

Supply & fixed in repairs PVC connection 15 mm size , 60 cm long with PTMT adopter,check nuts and washer on both sides complete all as specified.

S&F in repair brass chromium plated water jet with flexible tube of suitable length fixed on water closet (English type) complete all as specified.

S&F in repair brass chromium plated health faucet with flexible tube of suitable length fixed on water closet (English type) complete all as specified.

S&F in repairs 32 mm bore Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified

S&F in repair PVC flush pipe 32 mm bore high density for low level flushing cistern including all joints, washers suitable for Indian type WC complete all as specified.

S&F 125 mm size Brass chromium plated shower roses with swivel joints, including fixing to steel pipe or union complete, fixed in repair,all as specified and directed. Make:- Jaquar/Cera/ESS-ESS

S&F pillar taps, brass, with capston heads, fancy type, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed in repair, complete all as specified and directed. Make:- Jaquar/Cera/ESS-ESS

S&F in repairs brass chromium plated grating 125 mm dia circular with centre hole/ without hole of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified.

S&F in repair tubular towel rail 600 mm long of brass chromium plated 20 mm dia D type 60 cm long fixed with two plugs (gutties) of 2nd class hard wood embedded in cement mortar 1:3 with MS screws complete all as specified. Make:- Jaquar/Cera/ESS-ESS

S&F in repair Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms)

S&F in repair Soap dish stainless steel chromium plated fixed with brass screws and rawl plug complete all as specified .

S&F for 40 mm bore size waste coupling for steel sink/WHB/urinal etc with PVC cap complete fixed in repairs all as specified.

S&F in repairs angle iron brackets for WHB & kitchen sink including making good to existing surface including taking down WHB/ Sink and refixing the same complete all as specified.

S&F Glass corner shelf including CP railing, radius 300 mm complete all as specified and directed by the Engr-in-Charge, fixed in repairs.

S & F in repair of sinks with draining board made of stainless steel 1mm thick sheet for kitchen with plug washers, waste pipes, cast iron cantilever brackets, connecting union over all size 915mmx 460mm with bowl size 410x330x160mm, including bedding in cement mortar and connecting unions to pipe complete all as directed.

S&F in repair staniless steel sink 1mm thick without drainage board for kitchen with plug , waste pipe , washers, including cantilever cast iron brackets , connecting union to waste pipe etc, overall size 495x420mm with bowl size 410x330x160mm .

S&F in repairs kitchen plate rack made of stainless steel 1mm thick complete size 1200 x 900mm x 200mm width of trade pattern complete all as specified.

S&F in repairs plastic seat cover white for water closet pedestal pattern closed patter with flat bottom fixed with mild steel chromium plated or aluminium hinging device complete all as specified.

S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest including CI 'P' or 'S' trap with providing lime concrete bedding and connecting to flusing cistern complete including breaking up existing damaged WC seat and connecting flush pipe etc and make good to floor complete all as specified. Make for Sr items No. 119 to 121 & 124 :- Hindware/Paryware/Cera

S&F in repair vitreous china wash hand basin, white, flat back size 550 x 400 mm including one number brass CP waste coupling, 32 mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white including plastic water closet sheet cover white, closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device and including mild steel chromium plated jet fixed to water closet with 15mm dia and 1.2m to 1.5m long flexible pipe complete complete all as specified and directed.

S&F in repair of any dia PVC waste pipe for WHB/sink/urinal, complete all as specified.

S & F for Low density polyethylene (HDPE) 40mm pipes of pressure rating 6kgf/sq cm.

S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, bracket PVC short bendetc. complete all as specified and directed .

Taking up or down steel tubing 15 mm bore and connections, including cleaning for refixing or removal to store complete all as specified.

Taking up or down steel tubing 20 mm bore and connections, including cleaning for refixing or removal to store complete all as specified.

S&F galvanised steel water tubes 'medium grade', 15 mm bore, with and including all GI fittings . fixed to walls, ceiling or laid in floors, complete all as specified and directed

S&F galvanised steel water tubes 'medium grade', 20 mm bore, with and including all GI fittings . fixed to walls, ceiling or laid in floors, complete all as specified and directed

Cleaning of over head tank RCC / PVC of any description and any capacity, descaling, washing complete with soap solution and removing vegetation around the over head tank / plate form to the entire satisfaction of Engineer in charge including disconnecting, opening and reconnecting GI tubing & fittings as per site requirement complete all as specified.

S&F Rotational moulded polythene water storage tank white antimicrobial triple layer, ISI Marked of capacity 500 litre cylindrical vertical with closed top hoisted in position complete including dismantling of existing tank of any description, capacity complete all as specified and directed. Make:- Sintex/Rotex/Sheetal

S&F Rotational moulded polythene water storage tank white antimicrobial triple layer, ISI Marked of capacity 1000 litre cylindrical vertical with closed top hoisted in position complete including dismantling of existing tank of any description, capacity complete all as specified and directed. Make:- Sintex/Rotex/Sheetal

S&F Rotational moulded polythene water storage tank white antimicrobial triple layer, ISI Marked of capacity 2000 litre cylindrical vertical with closed top hoisted in position complete including dismantling of existing tank of any description, capacity complete all as specified and directed. Make:- Sintex/Rotex/Sheetal

S&F 25 mm bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) complete, fixed in repairs, all as specified.

S&F in repairs GI / UPVC fittings like socket, elbow, tee, nipple, union etc suitable for 15mm bore pipe complete all as specified and directed by the Engr-in-Charge.

S&F in repairs GI / UPVC fittings like socket, elbow, tee, nipple, union suitable for 20mm bore pipe complete all as specified and directed by the Engr-in-Charge.

Supply & fixed in repairs GI / UPVC socket, elbow, tee, nipple, union suitable for 25mm bore dia pipe all as directed & specified

Supply and fixed in repair brass spindle for pillar cock, stop cock (Concealed), angle cock, bib cock & wall mixer cock for 15mm complete all as specified

Supply and fixed in repair brass spindle for pillar cock, stop cock, bib cock & wall mixer cock for 20mm complete all as specified

S&F stainless steel paper holder, fixed with gutties and steel screws on wall complete, fixed in repairs, all as specified.

S&F in repairs water tank cover of any capacity and description, complete all as specified.

Cleaning blockage in rain water pipe by removing the CP grating and rodding etc & removing & cleaning and refixing old CI grating in position in cement mortar 1:6 complete all as specified.

Taking down eaves gutters and rainwater pipes (any size or pattern ),including all fittings,heads,shoes,bends,swan necks etc.including cleaning or refixing or removal to store.

S & F 110 mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors/trenches with & including existing/new MS stack clamps of FI 50X3mm, complete all as specified and directed

All as per item No 143 here in before but 75mm -ditto-

S&F 110 mm dia PVC (SWR ) branches piece,double (double Y) equal or unequal with rubber rings ljoits fixed to walls complete all as specified and as directed.

S & F 110 mm PVC (SWR) branch pieces (Tee) with cement joint complete all as specified and directed

All as per item No 148 here in before but 75mm -ditto-

S & F 110mm bore PVC(SWR) bend/shoe of any radius, with cement joint complete all as specified and directed.

All as per item No 148 here in before but 75mm -ditto-

S & F 75mm bore PVC (SWR) vent cowl, complete all as specified.

M & L for PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and as directed by the Engineer-in-Charge.

Cleaning/clearing of sewer line under ground mechanically of any depth by removing any type of blockage including desilting, descaling and de-chocking from drain manually using roding by any means and flushing after cleaning/clearing of sewage line.The entire sludge water shall be disposed off out of Defence land complete all as specified and directed by Engineer-in-Charge for the following - : (a) Upto 200 mm bore pipe

(b) Exceeding 200 mm bore and upto 300 mm bore pipe

Taking off manhole cover, cleaning of manholes in use by taking out complete sludge water, solids, brick bats, polythene, silt etc complete mechanically by HCV mounted suction discharge machine, removing/disposing the entire sludge outside periphery of defence land including placing the manhole cover properly after cleaning for the following:- (a) 1st manhole n.exc 1.00 mtr depth of any size

(b) Exceeding 1 mtr depth but not exceeding 2 mtr depth of any Size

(c) Exceeding 2 mtr depth but not exceeding 3 mtr depth of any size

M&L of cleaning of Septic tank/soakage well/manhole etc mechanically by using suction(vacuumed) machine including getting out sludge/waste and well flushing after cleaning, removing sludge/waste to low lying area clearing the inlet and outlet pipe mouth, etc of any depth, complete all as specified and directed.

M&L for cleaning/removal of blockage of floor traps/Nahani traps of 75mm/100mm bore in kitchen/bathroom/toilets etc up to 1st manhole including of taking down PVC/CP grating and re-fixing the same with white cement with pigment to match the surface as before or any other associated/related complaints not mentioned under this item and will be done as directed by Engr-in-Charge. Note:- The Traps shall be measured more than one times as per site requirement/frequently blockage.

M&L for cleaning/removal of blockage of IWC/EWC ‘P’/’S’ Traps and making functional up to 1st manhole or any other associated/related complaints not mentioned under this item and will be done as directed by Engr-in-Charge. Note:- The IWC/WC shall be measured more than one times as per site requirement/frequently blockage.

M&L for cleaning/removal of blockage of Gully traps up to 1st manhole of any size and depth including removing RCC covers and re-fixing the same as before or any other associated/related complaints not mentioned under this item and will be done as directed by Engr-in-Charge. Note:- The Gully Traps shall be measured more than one times as per site requirement/frequently blockage.

Taking out liquid/solid content sludge etc from sump, septic tank, manhole and soak well either manually or by pumping cleaning thoroughly including disposal of liquid/solid content out side defence area complete all as specified

Demolition of cement concrete (reinforced) of any description and in any position not otherwise secifically provided.complete all as specified and directed.

M & L for precast RCC type B-1 1:2:4 ( using 20 mm graded aggregate ) as in cover slab set in CM 1:4 including necessary form work if required complete all as specified and directed.

Mild steel TMT bars 6 mm to 8 mm dia cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire ( annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L TMT bars 10mm dia and over, cut to length, bent to shape as required incl cracking bending hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed

S&F Steel fibre RCC manhole covers & frames medium duty circular (as per IS-12592) for clear opening 600 mm complete all as specified.

S&F in repairs CI Bends (any radius) diminishing pieces or tappers 75 mm dia complete all as specified.

S&F in repairs CI Bends (any radius) diminishing pieces or tappers 100mm dia complete all as specified.

S&F in repairs cast iron sand cast pipe 75 mm dia fixed to walls etc complete all as specified.

S&F in repairs cast iron sand cast pipe 100 mm dia fixed to walls etc complete all as specified.

S&F in repairs CI 'P' traps, 100 mm dia complete all as specified.

S&F in repairs cast iron oval access door plates with nut and wahsers suitable for 75 mm dia CI waste pipes upto four storey height complete all as specified.

S&F in repairs cast iron oval access door plates with nut and wahsers suitable for 100 mm dia CI waste pipes upto four storey height complete all as specified.

M&L for salt glazed stonewere gully traps, square or round mouthed 125 x 150 mm size type 'P' including cast iron cover grating and setting and jointing to drain pipe in Cement Mortar 1:1 complete all as specified and directed.

Cutting of grass, growth/ vegetations, bushes or like and similar work and making the workable space for carrying out cleaning of sewage line/ manholes in any location or condition all as specified and directed by Engineer-in-Charge

SANMATI UDYOG (BID ID -3285850)