Karnataka

Active

Works

Bridge cum Barrages

onstruction of Bridge cum Weir across Arkavathy river to Connect Thamasandra circle to Thamasandra village in Kallahalli G.P, Kanakapura taluk, Ramanagara Distirct

Cauvery Neeravari Nigam Limited

CNNL Mekedatu Project Div Harobele | Mysore, Karnataka

Amount: ₹4.0 CrCloses: 29 Jun 2026

Tender Value

₹4.0 Cr

EMD Value

₹6.0 L

Closing Date

29 Jun 2026, 9:30 pm

Tender Inviting Organisation

Name

Cauvery Neeravari Nigam Limited

Work Description

Construction of Bridge cum Weir across Arkavathy river to Connect Thamasandra circle to Thamasandra village in Kallahalli G.P, Kanakapura taluk, Ramanagara Distirct

Tender Information

Tender ID

248255

Reference Number

CNNL/2024-25/BB/WORK_INDENT2575/CALL-3

Tender Type

Open

Product Category

Bridge cum Barrages

Location

CNNL Mekedatu Project Div Harobele

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredAnnual Turnover Certificate issued by CA

RequiredKPWD Registration Certificate of class II and above

RequiredWork done Certificate with year wise executed quantity breakup

RequiredTechnical person certificates and CV

RequiredAssessed available tender Capacity with existing commitments details

RequiredLine of credit certificate in prescribed format

RequiredVehicle RC copies and Bills of the equipments

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The Intending bidder are advised to visit the site of work and also access the tender documents well in advance

Conditional tenders will not be accepted.

The tenderer shall bear all costs associated with the preparation and Submission of his tender, and the employer will in no case be responsible and liable for those costs.

The TENDER PROCEESING FEE will not be refunded.

The CNNL reserves the right of rejecting all or any of the tenders without assigning any reasons,

If the quoted rates for the items fall below the estimated rates, the successful bidder should produce an additional performance Guarantee in the form of Bank Guarantee for the difference amount of quoted rates and estimated rates before executing agreement with CNNL. In case of contractor quoting rate above 125% of the estimated rates, then the amount over and above 125% will be withheld during the progress of work..

The contractor should be registered in respective class Category of KPWD / Any State / Central Government / Public sector organizations

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders

The rates quoted by the contractor must be inclusive of sales Tax and any other duties, taxes, etc., except GST The contractor is also required to pay quarry Fees, Royalties, Octroi Dues levied by the state Government or any Local body or an authority and ground rent, if any, charged by the Executive Engineer for stacking materials. No Extra Payment on this account will be made to the contractor.

Materials like steel, cement etc., required for the work shall be procured by the Contractor themselves and should get the same tested by the quality control authority of CNNL before use in this work.

All the formats prescribed in the bid document shall be filled by the bidders in a complete manner. Incomplete formats may constitute sufficient reason at the discretion of CNNL for rejection of the bid

All scanned documents to be uploaded shall be in original and the Executive Engineer will verify the original documents at any stage before recommending for approval.

Further particulars, if any, required by the bidders can be had from the office of the Executive Engineer, Manchanabele Project Division, Ramanagara during office hours on all working days. It may be noted that if any of the calendar of any event mentioned above happen to be General Holiday / Declared holiday, the next working day will hold good for the respective events

The work includes all lead and lift / de-lift and work shall be carried out as per instruction of engineer-in-charge of the work. And all the specification as per Indian road congress and all relevant Indian codes. The rate for the specifications in the Schedule-B includes all lead and lift, irrespective of distance and height

The intending bidders should note that if any of the land either in part / parts or in whole required for the work is not yet acquired by the Nigama, it shall be the responsibility of the bidder to take possession of such land and start the work by obtaining necessary consent of the land owners before commencement of work at no extra cost to the Nigama and no claim what so ever relating to non-availability of land will be entertained. Any delay in obtaining consent of the land owners shall not be considered for any additional compensation.

The undersigned reserves the right to either postpone or to cancel the entire process of tender

If CNNL wishes to engage third party consultants for quality control assessment, apart from the CNNL quality control and field tests, the contractor should co-operate with both Quality control authorities and the third party

Defect liability period will be 3 Years from the date of completion and satisfactory commissioning

Performance guarantee:- For all works an amount equal to 5.00% of the contract value will be withheld as Performance Guarantee Amount till the expiry of the defect liability period

Building and other construction workers welfare cess The contractor shall subscribe 1.00% of gross amount of each bill payable to him in respect of contract to the building and other construction workers welfare cess as per GO No: LD 300 LET 2006, Bangalore, dated: 18-01-2007. The amount of subscription will be recovered out of payable amount to him in each bill. This component is deemed to have been included in the quoted rate / percentage.

The Tenderer should furnish the Name of the individual / firm/ Company with address and telephone number with place of registration, year of incorporation etc.,

The scanned signature of the bidders / authorized representatives of the bidders shall be attached while uploading the Bid document

The Tenderer should furnish the requisite Earnest Money Deposit, Earnest money deposit will have to be in any one of the forms as specified in the Tender document and shall have to be valid for 45 days beyond the validity of the tender

The Tenderer should furnish a copy of the Income Tax Return for the latest financial year

A copy of GST Certificate of the latest financial Year

Employees Provident fund Registration Certificate In respect of Contractors who are not registered with the EPF (Employees Provident Fund) authorities, the contractors should produce an undertaking that he shall within 7 days of the close of every month submit to the Executive Engineer, a statement showing the recoveries of contributions in respect of employees employed are through in and shall also furnish under the provision of the scheme to the commissioner, EPF However, having given an undertaking to this effect if the contractor does not furnish the information, the Nigama will deduct the necessary amount from the amount due to the contractor. Notwithstanding the above, the contractor will be liable for any consequential penalty /damages levied by the EPF authorities

The necessary certificates / documents in support fulfilling qualification criteria stipulated separately shall be scanned and attached to e-procurement document. The original document shall be produced at the time of opening of tender containing the Technical Bid for verification

The Bidder should also furnish the list of work on hand with all details. Such as bid cost, date of entrustment, stipulated date of completion, actual date of completion, completed cost of work, etc

Necessary certificates should be signed by an officer not below the rank of the Executive Engineer

The intending Bidder/firm/company/ should have man power and machineries available with him for taking up above work

The intending Bidder/firm/company/ shall provide evidence that the bidder has been actively engaged in the similar nature of work for at least for a period of 5 years prior to the date of submission of application

The intending Bidder/firm/company/ shall provide accurate information on the related application form about any litigation or Arbitration resulting from contracts completed or on going under its execution over the last five years. The consisting history of awards against the tenderer or any partner of a may result in failure of the application

The intending Bidder/firm/company shall provide the audited balance sheets or other financial statements acceptable to the employer for the last five years and must demonstrate the current soundness of the applicants financial position and indicate its prospective long term profitability. If deemed necessary, the employer shall have the authority to make enquiries with the applicants bankers

After award of the work to eligible contractor. Contractor must set up field lab with all required equipment at the site mandatorily

Technical Criteria

Past Experience

The bidder/Firm/company should have satisfactorily completed as a prime contractor, at least one similar work such as Construction of Bridge / barrages works of value not less than Rs. 201.50 Lakhs at 2025-26 price level in the preceding last five years. (i.e. 2020-21 to 2024-25)

Work Done Certificate

The intending bidder / firm / company should have in the last five years satisfactorily executed in any one year the following minimum quantities of the work (1) Cement Concrete (Cum) 3140, 2) Steel (T) 57.0,Note: Work done certificate with year wise breakup of quantities should be furnished.

Work Done Certificate

Capabilities of Vendor

Each Tenderer should further demonstrate a) Availability by owning at least 50 percentage of the required following key and critical equipments for this work (b) the remaining 50 percentage can be deployed on lease/hire for all works provided, the relevant documents (Commitment agreements etc.,) for availability for this work are furnished.1) Excavator or JCB (1 own and 1 lease or hire) 2 No., 2) Tipper (1 own and 1 lease or hire) 2 No., 3) Water tanker (1 own and 1 lease or hire) 2 No., 4) Concrete Mixer or Ajax (1 own and 1 lease or hire) 2 No. 4 CUm capacity 2 No, 5) Vibrator Roller (1 own and 1 lease or hire) 2 No. 6) Plate vibratory and Needle Vibratory (1 own and 1 lease) 02 Nos, 7) Auto leveling Equipment (lease or Hire or Own) 01 Nos

Others -- Vehicle RC copies and Bills of the equipments

Tenderers who meet the above specified minimum qualifying criteria will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as underAssessed available tender capacity (AxNx1.5-B) Where A Maximum value of civil engineering works executed in any one year during the last five years (updated to 2025-26 price level) taking into account the completed as well as works in progress,N Number of months prescribed for completion of the works for which tenders are invited, B Value at 2025-26 price level, of existing commitments and on-going works to be completed during the next 270 days.

Others -- Assessed available tender capacity calculation

List of Key Minimum Technical personal required for the work are as under and should be enrolled in company/ firm/company/ should Employment register and document should be uploaded-Civil Engineer or Diploma Holders-Civil Engineering with Min 5 years experience-1 No.

Others -- Curriculum vitae-key professional staff

Financial Status

The intending bidder/firm/ company / should have achieved in at least two out of last Five financial years (i.e. 2020-21 to 2024-25) (In all classes of civil Engineering construction works only) a minimum ANNUAL FINANCIAL TURNOVER of Rs.806.50 lakhs

Audited CA Certificate of Annual Turnover

Liquid assets and /or availability of credit facilities of no less than Rs 121.00 Lakhs (Credit lines/ letter of credit/ certificates from scheduled / nationalized banks for meeting the fund requirement etc.) in the prescribed format.

Line of Credit

Others

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Others -- Not Applicable

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Others -- Not Applicable

List of existing commitments and ongoing works

Others -- Not Applicable

List of works for which tenders already submitted

Others -- Not Applicable

Banker Details for reference

Others -- Not Applicable

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Others -- Not Applicable

Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years

Others -- Not Applicable

List of Financial Resources with Certificates

Others -- Not Applicable

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹6.0 L

Important Dates

Last Activity

12 Jun 2026

Published

12 Jun 2026

Bid Opening

30 Jun 2026

Download Ends

29 Jun 2026

Pre-Bid Meeting

16 Jun 2026

BOQ Preview

•

Construction of Bridge cum Weir across Arkavathy river to Connect Thamasandra circle to Thamasandra village in Kallahalli G.P, Kanakapura taluk, Ramanagara Distirct

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications including setting out, shoring, strutting, barricading, caution lig...

•

Providing and fixing 25mm diameter steel anchor dowel in hard rock including drilling hole of 32 mm diameter up to 0.75 mtrs depth, placing the dowel in position and effectively grouting the hole with...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite /trap /basalt crushed graded coarse aggregates and fine aggregates as per relevant ...

•

Providing and laying insitu vibrated cement concrete M-20 using approved, clean, hard graded aggregates including cost of all materials, machinery, labour, cleaning, batching, mixing, placing in posit...

•

Additionalities for Formwork, Centering & Scaffolding for Sub structure including cost and conveyance of all materials, Labour, hire, charges of machineries and equipment, lead and lift, loading and u...

•

Providing and laying in-situ vibrated M-20 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for RCC works of gallery, sluice, spillway crest, spillway d / s face, energy...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

•

Additionalities for Formwork, Centering & Scaffolding for Super structure including cost and conveyance of all materials, Labour, hire, charges of machineries and equipment, lead and lift, loading and...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/ welding joints, tyi...

•

Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufactur...

•

Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. (Batching Plant) and as directed by the engineer in charge

•

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towar...

•

Drainage Spouts using 100 mm GI pipe complete as per drawing and Technical specification and as directed by the engineer in charge

•

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than...

•

Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification. A. Boulders lai...

•

Providing casing embankment using semi-pervious / pervious approved soil from borrow areas in layers of 250 to 300 mm ( before compaction ) including cost of all materials, machinery, labour, all othe...

•

Laying Reinforced cement concrete pipe NP4 / prestressed concrete pipe for culverts on first class bedding of granular material in double row including fixing collar with cement mortar 1:2 but excludi...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

2575 Bridge Thamasandra - Call3.doc

Tender Document • 5.04 MB

Ready to Participate?

Download all tender documents and submit your bid

onstruction of Bridge cum Weir across Arkavathy river to Connect Thamasandra circle to Thamasandra village in Kallahalli G.P, Kanakapura taluk, Ramanagara Distirct

Market Intelligence

Tender Inviting Organisation

Work Description

Tender Information

Documents Required

Eligibility Criteria

Technical Criteria

Fee & Financial Details

Important Dates

BOQ Preview

Documents

NIT Documents

Ready to Participate?