Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.6 CrAccepted-Finance 7TH FLOOR 738 GERAS IMPERIUM STAR PATTO PANAJI 403001 | PANAJI | NORTH GOA | GOA | 403001 | ₹27.6 Cr | L1 | Accepted-Finance 1st Lowest |
| 2 | L2₹28.3 CrRejected-Finance A 76 SECTOR 63 NOIDA UTTAR PRADESH 201301 | NOIDA | GAUTAM BUDDHA NAGAR | UTTAR PRADESH | 201301 | ₹28.3 Cr | L2 | Rejected-Finance 2nd Lowest |
Tender Value
₹24.2 Cr
EMD Value
₹34.2 L
Closing Date
11 Dec 2025, 5:00 pmClosed
Chief Electrical Engineer
5th Floor,CSC,Vidhyut Bhavan
Design, Supply, Erection, Testing and Commissioning of proposed 2X10MVA, 33KV/11KV Substation at Sonsodo (Indoor type) under Sub Division II Fatorda, DivisionIV, Margao Goa.
2025_ED_26628_1
Tender 24(2025-26)
Open Tender
Electrical Works
365 days
Sonsoddo
Please refer Tender documents.
4 documents required · 4 mandatory
₹1,500
₹34.2 L
Yes
5th Floor,CSC,Vidhyut Bhavan
1 Apr 2026
26 Nov 2025
12 Dec 2025
26 Nov 2025
11 Dec 2025
4 Dec 2025
2 Dec 2025
33/11KV , 3phase,50 Hz, ONAN, outdoor, 10 MVA, copper wound, Power Transformer, filled with transformer oil (+10 % extra oil in non-returnable drums), Magnetic oil gauge indicator, winding temperature indicator and all other accessories including OLTC, remote control panel for OLTC, complete as per Technical specifications. ( end box on HV/LV)
Supply of 200K VA. 33/0.44KV Station Transformer, copper winding, with bimetallic terminal connectors, energy efficiency level 1. as per IS1180 (Part 1). Amendment No. 4 March 2021 (inclusive of MRT testing and transport) as per following specification given below
33KV PANEL FOR INCOMER PANEL 36 KV, 1250 A ( Busbar current - 1250A ) , 31.5 KA 3 Secs, 3 phase, indoor type VCB, with spring type operating mechanism, mounted on rack out type trolley, Inbuilt Earth switch, along with 3 Nos of 36 KV CT, 3 core, 400-200-/1-1 Amps, 33 KV/110/v3/110v3 V Line Potential Transformer. LV Compartment with Breaker control panel consisting of voltmeter , ammeter, MFM, BCPU NUMERICAL relays 61850 protocol with master and Trip Circuit supervision, VPIS, LED type indication lamps, TTBs, Annunciation, 3 phase , 4 wire , DLMS energy meter with 4G modem along with Software updation in the back end system for data integration with MDM. Complete as per Technical Specification.
33KV PANEL FOR 33KV BUS COUPLER 36KV, 1250A (Busbar current-1250A), 31.5KA 3 secs, 3 phase, indoor type VCB, with spring type operating mechanism, mounted on rack out type trolley, inbuilt earth switch, along with 3 nos of 36 KV CT, 3 core, 800-400-200-/1-1 Amps. LV compartment with Breaker control panel consisting of ammeter, MFM,BCPUNUMERICAL relays 61850 protocol with master and Trip Circuit supervision, VPIS,LED type indication lamps, TTBs, Annunciation, 3 phase, 4 wire, DLMS energy meter with 4G modem along with Software updation in the back end system for data integration with MDM. Complete as per technical Specification
33KV PANEL FOR BUS RISER CUM PT 33 kV Bus Riser Cum PT (Busbar current 1250A) 33KV/v3/110/v3/110/v3 Bus Potential Transformer. (PT shall be withdrawable type) with Voltmeter, VPIS, Inbuilt Earth switch for Bus Bar Earthing.
33KV PANEL FOR POWER TRANSFORMER 36 KV, 1250 A ( Bus bar current - 1250A ) , 31.5 KA 3 Secs, 3 phase, indoor type VCB, with spring type operating mechanism, mounted on rack out type trolley, Inbuilt Earth switch, along with 3 Nos of 36 KV CT, 3 core, 400-200-/1-1 Amps. LV Compartment with Breaker control panel consisting of ammeter, MFM, BCPU NUMERICAL relays 61850 protocol, Numerical Trafo Differential relay with master, Trip Circuit supervision and Trafo protection Aux relay, VPIS, LED type indication lamps, TTBs, Annunciation, 3 phase , 4 wire , DLMS energy meter with 4G modem along with Software updation in the back end system for data integration with MDM. Complete as per Technical Specification.
33KV PANEL FOR STATION TRANSFORMER 36 KV, 1250 A (Busbar current - 1250A), 31.5 KA 3 Secs, 3 phase, indoor type VCB, with spring type operating mechanism, mounted on rack out type trolley, Inbuilt Earth switch, along with 3 Nos of 36 KV CT, 3 core, 50/1-1 Amps. LV Compartment with Breaker control panel consisting of ammeter, MFM, BCPU NUMERICAL relays 61850 protocol with master and Trip Circuit supervision, VPIS, LED type indication lamps, TTBs, Annunciation, 3 phase, 4 wire, DLMS energy meter with 4G modem along with Software updation in the back end system for data integration with MDM. Complete as per Technical Specification.
33KV PANEL FOR OUTGOING PANEL 36 KV, 1250 A ( Busbar current - 1250A ) , 31.5 KA 3 Secs, 3 phase, indoor type VCB, with spring type operating mechanism, mounted on rack out type trolley, Inbuilt Earth switch, along with 3 Nos of 36 KV CT, 3 core, 400-200-/1-1 Amps. LV Compartment with Breaker control panel consisting of voltmeter , ammeter, MFM, BCPU NUMERICAL relays 61850 protocol with master and Trip Circuit supervision, VPIS, LED type indication lamps, TTBs, Annunciation, 3 phase , 4 wire , DLMS energy meter with 4G modem along with Software updation in the back end system for data integration with MDM. Complete as per Technical Specification.
33KV PANEL FOR 33KV BUS PT 33KV Bus PT (Busbar current 1250A) 33KV/√3/110/√3/110/√3 Bus Potential Transformer(PT shall be withdrawable type) with Voltmeter, VPIS, Inbuilt Earth Switch for Bus Bar Earthing
CONTROL AND RELAY PANEL FOR: INCOMER 12 KV, 1600 A (BB - 1600A), 25 KA 3 Secs, 3 phase, indoor type VCB, with spring type operating mechanism, mounted on rack out type trolley, along with 3 Nos of 12 KV CT, 3 core, 1200-800-/5-5-1 Amps, 11 KV/110/v3/110v3 V Line Potential Transformer. LV Compartment with Breaker control panel consisting of voltmeter, ammeter, MFM, B6BCPU NUMERICAL relays 61850 protocol with master and Trip Circuit supervision, LED type indication lamps, TTBs, Annunciation, 3 phase, 4 wire, DLMS energy meter with 4G modem along with Software updation in the back end system for data integration with MDM. Complete as per Technical Specification. (Incomer)
CONTROL AND RELAY PANEL FOR: OUTGOING FEEDER 12 KV, 630 A ( BB - 1250A ) , 25 KA 3 Secs, 3 phase, indoor type VCB, with spring type operating mechanism, mounted on rack out type trolley, along with 3 Nos of 12 KV CT, 3 core, 400-200-/5-5 Amps, LV Compartment with Breaker control panel consisting of voltmeter , ammeter, MFM, BCPU NUMERICAL relays 61850 protocol with master and Trip Circuit supervision, LED type indication lamps, TTBs, Annunciation, 3 phase , 4 wire , DLMS energy meter with 4G modem along with Software updation in the back end system for data integration with MDM. Complete as per Technical Specification. (Outgoing)
11KV PANEL FOR 11KV BUS COUPLER 12 KV, 1600 A ( BB - 1600A ) , 25 KA 3 Secs, 3 phase, indoor type VCB, with spring type operating mechanism, mounted on rack out type trolley, along with 3 Nos of 12 KV CT, 3 core, 1200-800-/5-5 Amps, LV Compartment with Breaker control panel consisting of voltmeter , ammeter, MFM, BCPU NUMERICAL relays 61850 protocol with master and Trip Circuit supervision, LED type indication lamps, TTBs,Annunciation, 3 phase , 4 wire , DLMS energy meter with 4G modem along with Software updation in the back end system for data integration with MDM. Complete as per Technical Specification. ( Bus Coupler)
11KV PANEL FOR BUS RISER CUM BUS PT 11KV Bus Riser Cum PT ( BB 1600A ) 11KV/v3/110/v3/110/v3 Bus Potential Transformer. ( PT shall be withdrawable type )
11KV PANEL FOR 11KV BUS PT 11KV Bus PT (Busbar current 1250A) 11KV/√3/110/√3/110/√3 Bus Potential Transformer(PT shall be withdrawable type)
30V, 150 Amp Hr, Valve Regulated Lead Acid (VRLA) type maintenace free batteries set at 10 hr discharge rate consisting of 16 Nos, each of 2 V, cell having terminal connectors, self supporting stack fully charged ready to use complete with all other accessories alongwith nut & Bolts, as per technical specs.
Supply Erection , testing & commisioning of Thyristor controlled Battery Charger set with full wave rectification, 3 phase, 440 V, 50 Hz, input voltage for charging above specified 30 V, 150 Amphr battery with provision for float and boost charging and automatic changeover with necessary indicating meters and annunciation, required cable, connectors complete as per Technical specs.
30 V, DC Distribution board/panel of sheet steel enclosed cubical floor mounting type for catering auxialiary DC power of the substation consisting of 1 No incomer (DP Air break switch/MCCB), changeover swich, 6 Nos outgoing feeders with HRC fuse, 1 No metering module consisting of Voltmeter & ammeter, power ON/OFF indication lamps, earth leakage relay DC fail alarm etc, complete as per Technical specs.
XLPE insulated armored 33KV(Type A2XFY, FRLS), 3 core 400 mm² aluminum cable
XLPE insulated armored 11KV (Type A2XFY, FRLS), 3 core 400 mm² aluminum cable
Unarmoured Single Core 120 sq.mm 1.1 KV grade for station trf and for interlink of AC panels
33 KV Heat shrinkable XLPE termination kit for 3 x400 Sq.mm. Cable outdoor type Suitable for heavily polluted atmosphere conditions with total creepage distance of 31mm/KV & protected creep age distance of not more than 50% of the total creep age distance, complying to IS:1255-1983.
33 KV Heat shrinkable XLPE termination kit for 3 x 400 Sq.mm. Cable indoor type Suitable for heavily polluted atmosphere conditions with total creepage distance of 31mm/KV & protected creep age distance of not more than 50% of the total creep age distance, complying to IS:1255-1983.
11 KV Heat shrinkable XLPE termination kit for 3 x 400 Sq.mm. Cable outdoor type Suitable for heavily polluted atmosphere conditions with total creepage distance of 31mm/KV & protected creep age distance of not more than 50% of the total creep age distance, complying to IS:1255-1983.
11 KV Heat shrinkable XLPE termination kit for 3 x 400 Sq.mm. Cable indoor type Suitable for heavily polluted atmosphere conditions with total creepage distance of 31mm/KV & protected creep age distance of not more than 50% of the total creep age distance, complying to IS:1255-1983.
Supply and laying in trench of 1.1kV Multistrand Copper Conductor, PVC insulated, Armoured control cable and conforming to IS: 1554(Pt I) 1988 as amended upto date alongwith cable glands and lugs complete as per technical specifications of the size 27 C x 2.5 sq.mm (Transformer Marshalling Box to Control & Relay Panel)
Supply and laying in trench of 1.1kV Multistrand Copper Conductor, PVC insulated, Armoured control cable and conforming to IS: 1554(Pt I) 1988 as amended upto date alongwith cable glands and lugs complete as per technical specifications of the size 19 C x 2.5 sq.mm (Transformer OLTC MB to RTCC Panel)
Supply and laying in trench of 1.1kV Multistrand Copper Conductor, PVC insulated, Armoured control cable and conforming to IS: 1554(Pt I) 1988 as amended upto date alongwith cable glands and lugs complete as per technical specifications of the size 12 C x 2.5 sq.mm (Transformer Marshalling Box to RTCC Panel)
Supply and laying in trench of 1.1kV Multistrand Copper Conductor, PVC insulated, Armoured control cable and conforming to IS: 1554(Pt I) 1988 as amended upto date alongwith cable glands and lugs complete as per technical specifications of the size 4 C x 2.5 sq.mm (Transformer OLTC MB to ACDB)
Cable Trays & Accessories Type 'B' cable trench two layers 450/75 mm wide
Cable Trays & Accessories Type 'B' cable trench two layers 600/75 mm wide
BMK Box (Panel) size 700x1000x500mm Thickness of 2mm HDGI, Angle stand mounted outdoor type doubble door panle powder coating opening form back and front.
Procurement of materials, design of the structures, preparation of fabrication drawings, fabrication, Galvanising, proto-assembly, testing of lattice type structure for 33 KV switchyard and 11KV takeoff structure i.e. Towers, beams, lighting tower, Equipment support structure etc. (Fabricated from structural steel conforming to IS 2062) including Nuts, bolts, foundation bolts, washers & other accessories complete as per Technical specs.
Class B, 100 mm dia nominal bore, 3000 mm long pipe earth electrodes with test Connection links having welded flat of size 50 x 6 mm for connecting earth strip, RCC chamber, CI cover hinged to CI frame, other accessories as per Technical specs, alongwith required quantity of charcoal, salt etc or Bentonite to be buried below ground and to be connected with earth mat of MS Flat. i.e. Chemical Earthing.
Special Earthing Borewell type with 2 1/2 pipe 20 mts. deep in hard rock area
50 x 6 mm HDGI Flat for earth mat & risers.
Executive table of size 60”(L)x36”(W)x30”(H) with table lop of 18mm thick prelaminated Particle Board of reputed brand with 3 drawers on RHS with automatic locking arrangement fabricated out of 20g CRC Sheet. Pretreated for Antirust and oven baked paint finish with Executive Chair.
Operator table of size 48”(L)x24”(W)x30”(H) with table lop of 18mm thick prelaminated Particle Board of reputed brand with 3 drawers on RHS with automatic locking arrangement fabricated out of 20g CRC Sheet. Pretreated for Antirust and oven baked paint finish with chair.
Computer table with chair as per approved design by Engineer-In-charge
IP Phone with latest specification
B & W Laser Printer Network Type as per latest specification
Computer with 8GB RAM, 1TB Hard Disk, I 7 Or higher version Processor, 21" Monitor, 3.2GHz, Window 8.1, Office 16 or higher with UPS(2.6Amp), USB ports at front and back both , ,internal speaker ,Key bord, M
ouse and HDMI & Power & Connection Cables.
Medium back work chairs netted model(for officers) Low back with cusioned seats20-23''Wx 21-23Dx16-20'' seat& 33''Netted backrevolving and adjustable for seat height. Seat Cusioned with good quality foam and with5 pronged drum cluster wheel base.
Steel Industrial Lockers: overall sixe 78”x36”x19” having 18 individual compartments each having knob, lable holder ventilation louvers and Staple locking arrangement. Fabricated from 20g CRC Sheets and Pretreated for Antirust and oven baked paint finish
Office Cupboard 78”x36”x19” with adjustable 4 shelves making 5 compartments made out of C.R. sheet 20 guage with good locking arrangement with stainless steel keys in duplicate Pretreated for Antirust and oven baked paint finish
Supply of 2KVA Isolation transformer(1:1) confirmimg the following specifications: Voltage input: 230V AC Output 230V AC unregulated Protection 10Amps MCB on Primary side & cartridge 16Amps on both the sides Indication LED + moving iron voltmeter 300VAC Material of widing Copper Rating 2KVA frequency 50Hz Class IP 42Input cable 5Mts long 3C cable with 3pin plug Output 02 Nos of sockets-5 pin-5Amps earth terminal on MS Enclosure.
WORK FOR SETC OF INCOMING FEEDERS using 33KV XLPE CABLES at Proposed 2X10MVA, at 33KV/11KV Sonsodo SUB-STATION
4-Way 33KV RMU-4LBS, 33KV, 630A, 25KA, 3secs, 4 way Outdoor Ring Main Unit comprising of 4 nos. 630A isolators
Supply of XLPE insulated armored 33KV(Type A2XFY, FRLS), 3 core 400 mm² aluminum cable
Earthing complete with 40mm GI Pipe, 2.5 mts long alongwith Batonite complete with brick masonary.
Supply and Laying of GI Flat 25 x 5 mm.(6m per earthing set)
33KV Touch proof screen connectors for 33KV RMU
-WORK FOR SETC OF OUTGOING FEEDERS using 11KV XLPE CABLES Proposed 2X10MVA, at 33KV/11KV Sonsodo SUB-STATION
4-Way 11KV RMU-4LBS, 11KV, 630A, 21KA, 3secs, SF6 Outdoor Ring Main Unit comprising of 4 nos. 630A isolators
3-Way 11KV RMU-3LBS, 11KV, 630A, 21KA, 3secs, SF6 Outdoor Ring Main Unit comprising of 3 nos. 630A isolators
Supply of 11KV, 3 core 300 sq.mm A2XFY Aluminium Armoured XLPE Cable
S.E.T & C Indoor type, heat shrinkable, three phase, end termination kit complete, for 11 KV XLPE cable of size 3 x 300sq.mm
S.E.T & C 11KV, three phase, Heat shrinkable, Straight Through Jointing Kit complete for XLPE cable of size 3 core 300sq.mm.
Supply & Erection of Cable route Markers (for entire route length)
Supply of XLPE insulated armored 33KV(Type A2XFY, FRLS), 3 core 400 mm² aluminum cable
Earthing complete with 40mm GI Pipe, 2.5 mts long alongwith Batonite complete with brick masonary.
WORK FOR S. E. T & C OF ILLUMINATION OF APPROACH ROAD TO THE Proposed 2X10MVA, at 33KV/11KV Sonsodo SUB-STATION (Indoor type)
S.E.T.C. of HDGI, 8.0mts long Octagonal tapered Poles made out of 4mm thick plate (Top 70mm, Bottom 155mm) and having the following provisions and of make:- Bajaj Electrical Ltd., Transrail, Hakke Industries Pvt. Ltd. and Utkarsh India Pvt. Ltd. a. Hot rolled stud plate confirming to grade S355JO b. Base Plate steel of size 225 x 225 mm, thickness 16mm confirming to IS226/IS2062 c. 1.5mts long triple arm brackets HDGI, 3.25mm thick for mounting the fixture of outer diameter 50mm. d. 50mm dia HDPE pipe, PN-4, P-63 Grade 2.65mm for cable entry and exit (2) runs). e. Door opening of approx. length 500mm at a elevation of 500mm from the base plate f. along with a Set of 4 nos. J type M20 (UNF Thread - 100mm) foundation bolts of grade EN 8 & IS1367 of suitable length for 6mtr/pole.
S.E.T.C. of HDGI, 8.0mts long Octagonal tapered Poles made out of 4mm thick plate (Top 70mm, Bottom 155mm) and having the following provisions and of make:- Bajaj Electrical Ltd., Transrail, Hakke Industries Pvt. Ltd. and Utkarsh India Pvt. Ltd. a. Hot rolled stud plate confirming to grade S355JO b. Base Plate steel of size 225 x 225 mm, thickness 16mm confirming to IS226/IS2062 c. 1.5mts long double arm brackets HDGI, 3.25mm thick for mounting the fixture of outer diameter 50mm. d. 50mm dia HDPE pipe, PN-4, P-63 Grade 2.65mm for cable entry and exit (2) runs). e. Door opening of approx. length 500mm at a elevation of 500mm from the base plate f. along with a Set of 4 nos. J type M20 (UNF Thread - 100mm) foundation bolts of grade EN 8 & IS1367 of suitable length for 6mtr/pole.
S.E.T.C. of HDGI, 8.0mts long Octagonal tapered Poles made out of 4mm thick plate (Top 70mm, Bottom 155mm) and having the following provisions and of make:- Bajaj Electrical Ltd., Transrail, Hakke Industries Pvt. Ltd. and Utkarsh India Pvt. Ltd. a. Hot rolled stud plate confirming to grade S355JO b. Base Plate steel of size 225 x 225 mm, thickness 16mm confirming to IS226/IS2062 c. 1.5mts long single arm brackets HDGI, 3.25mm thick for mounting the fixture of outer diameter 50mm. d. 50mm dia HDPE pipe, PN-4, P-63 Grade 2.65mm for cable entry and exit (2) runs). e. Door opening of approx. length 500mm at a elevation of 500mm from the base plate f. along with a Set of 4 nos. J type M20 (UNF Thread - 100mm) foundation bolts of grade EN 8 & IS1367 of suitable length for 6mtr/pole.
Supply and Installation of LED lights fixture fitting 214W
Supply & Installation of ThreePhase (9KVA) Central Control and Monitoring System (CCMS) Street light Control Panels for underground cable network including grouting work consisting of following: 1 )HDGI stand (a per IS 2629/66. minimum zinc coating of 1000 gms/sq. mtr, 140 Microns DFT) for mounting CCMS Panel (Drawing attached) - I No. 2) Supply and termination of 4 core, 4 storm. multicorc, PVC, Round Copper flexible Cable, 1100 Volts. CONFORMING TO IS: 694/2010 along with lugs and Cable glands:-3Mtr. 3) Earthing set for CCMS Panel as per attached drawing no. CEF)E- 829-1 Set
Supply and Installation of 6 Amps MCB for Octagonal Poles
Supply of 1.5 meter x 40 mm long rigid PVC pipe dia with bend/tee for cable entry and exit.
Supply and Laying P.V.C. Copper Cable(unArmoured , flexible) 2 Core x 2.5 sq.mm. (from junction box to LED fixture)(10m per LED Fixture)
Supply and laying of XLPE underground cable armoured 3 1/2 C 25 sq.mm 1.1 KV Grade
COMPRESSION TYPE ALUMINIUM TUBULAR TERMINAL ENDS (LUGS) Aluminum crimping lugs of size 25 sq mm Aluminum crimping lugs shall conform to IS: 8309-1976 as amended upto date. Lugs shall be made of aluminium of grade 1E of IS 5082-1969
Earthing complete with 40mm GI Pipe, 2.5 mts long alongwith 20 kgs each salt, charcoal complete with brick masonary/chamber(as per CEE approved drawing, enclosed) (Earthing for each pole)(double bolted/earthed)
Supply and Laying of GI Flat 25 x 5 mm.(3m per earthing set)
Supply and Laying of underground PCC Precast cable protective covers of size 480mm long x 250mm width and 50mm thick casted by confined mold vibratory cast of concrete mix M30, having strength of 30N/mm2 at 28days'
Centering and shuttering including struttings, propping etc. and removal of formwork for : Foundations, footings, bases for columns and mass concrete.
Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing
WORK OF SUPPLY FOR TOOLS A
ND PLANTS FOR Proposed 2X10MVA, at 33KV/11KV Sonsodo SUB-STATION (Indoor type)
Crimping Tools 50sq.mm to 300 sq.mm size dies complete with handling case (hydraulic type)
Box spanner set complete with case
Safety helmate
Hand gloves 33KV grade
Safety Belt
33KV FRP Earthing rod 3 stage bottom 45mm top 25mm total length of 6 feet to 15.18 feet (all sizes +0.5%) Earthing rod with alluminium casting hook and copper strip on top cable 10Mts(10Sqmm)
Vacuum cleaner with all accessories
Digital Clamp Meter 1000Amps 600Volts
Earth Meggar with all accsessories
Megger 2500V MEGGAR Make with probes
Megger 1000V MEGGAR Make with probes
Danger board 11KV/33KV
Fire Extinguisher dry type 6KG
Fire bucket with stand (a set of 3 bucket and 1 stand)
Rubber matting 1 Mtr x 0.8mm 33 kv
Neon tester upto 33KV
Emergency light
Rechargeble Torches
Battery tester with load
Fixed spanner set double end 8mm to 32mm
Ring spanner set double end 8mm to 32mm
Hacksaw frame with blade
Hammer 1Kg
Drilling machine(wolf) with drill bit sets
Bench wice
Resuscilation chart
Screw driver set (Min to Max)
Hand pump for transformer oil with all accessories
Shock treatmetn chart
First Aid Kit
Pedestal drilling machine
Hand lamp
Water cooler(10ltr)
Aluminium ladder 20 feets long
Pedestal fan(Industrial)
Turfor with 5ton pulling capacity
Pin up board fabricated from plywood backed soft boardwith flannel coveringof chosen alluminium border size 4'x3'
Chalk less board fabricated from plywood backed white board with alluminium border size 4'x3'
SUB ESTIMATE-6
Civil works of Proposed 2X10MVA, at 33KV/11KV Sonsodo SUB-STATION (Indoor type)
for the Construction of 33/11kv Control room at Sonsodo Fatorda-Goa.
Supplying and filling in plinth under floors, trenches including watering ramming consolidating, dressing, complete.
Moorum
Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.
Providing & laying cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in:
Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.
All works upto plinth level
Providing & laying cement concrete 1:4:8 (1 cement 4 : coarse sand : 8 river pebbles aggregates 40 mm. nominal size) excluding cost of centering, shuttering and finishing in:
Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing :
In retaining walls , return walls(any thk) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets etc, upto floor five level.
Brick work using common burnt building bricks in cement mortar 1:4 (1 cement : 4 coarse sand) with bricks of class designation 40 kg/ cm2 .
In foundation and plinth.
Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement.
Extra for laterite masonry in all sizes in superstructure from floor I level upto floor V level.
Centering & shuttering including Strutting, Propping & removal of forms for :
Foundations, Footings, Bases for columns
Vertical surfaces such as retaing walls, return walls, Partitions, walls (any thickness) including attached Pilasters, Buttresses, Plinth and string courses, Fillets and the like
Columns, Piers, Pillars, Aburments, Posts and struts (square rectangle polygon in plan)
Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth
Suspended floors, roofs landings, shelves & their supports
Staircases (except spiral staircases) excluding landing
Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.
Providing High yield strength steel reinforcement bar (HYSD)/TMT steel reinforcement bar from secondary producers (Confirming to IS 1786 of 1986) for RCC work including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.
Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size)
In walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and structs etc. upto floor five level
In beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases upto floor five level
Applying cement slurry on RCC slab on cement concrete work using 2.75kgs of cement per sq.m for receiving cement concrete floor including roughening, cleaning, etc complete
Providing and laying in position ready mixed concrete (RMC) with usage of Ordinary Portland Cement manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in-charge. All works upto floor V level
M-30grade of concrete
Providing and fixing M.S. grill of required pattern in wooden frames of Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by screws.
Plain grill
UPVC ONLY DOOR FRAME:- Providing & fixing Upvc Door Frame Yashashri make or equivalent made out of Upvc extruded multi cavity frame of 60 mm x 60mm x 2mm wall thickness. Frame is reinforced with G.I. Channel & welded in corners with Average weight 0.80 kg per running mtr. These frames are tested by using BS 2782 & DIN 53459 test methods.
32 MM DOOR SHUTTER:- Providing & fixing 32mm door shutter Yashashri make or equivalent, made by using 31mm x 150 mm x 1.5mm upvc multi-cavity section having Toung & Groove jointing method and boarder having 35mm x 30mm x multi- cavity section. The corners are joined by inserting polymetric corners & hardware used for fixing the door shutter is stainless steel hinges & S. S. handle S.S. tower bolt. The average weight of 32mm door shutter is 6.30 kg per sq mtr. These Upvc sections are tested by using BS 2782 & DIN 53459 test methods.
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, area of slab over 0.50 sqm
Jet Black
Providing 25 mm thick cuddapah slabs machine cut and polished on either side in partitions including making necessary grooves in the wall and fixing with cement mortar, complete as directed by the engineer-in-charge
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and
polishing etc. all complete as specified and as directed by the Engineer : Flamed finish granite stone slab.(d) Cat Eye
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and
Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: windows with three sliding shutters using 18 mm series shutters section.
Plain glass
Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Adjustable louvered windows.
Extra for powder coating with pure polyester powder of shade of required colour on the aluminium section
Steel work welded (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only)in built up sections trusses and framed work including cutting, hoisting, fixing in position and applying priming coat of red lead paint.
In tees, angles, flats and channels
Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade.
Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.
Painting two or more coats (excluding priming coat) with ordinary ready mixed paint of approved brand & manufacture in all shades except white or green on new work to give an even shade.
Providing water proofing treatment over the new R.C.C. roofs terrace toilet by spreading cement slurry over the R.C.C. slab and laying of 10cms. Average laterite stone ballast coba with the necessary gradient for easy flow of rain water and the coba in covered with damp proof of Hindustan water proofing co. Or equivalent jointless water proofing plaster of mix 1:3 ( 1 cement : 3 find sand), finished smooth with wooden trowel with false marking of 30 cms square. The vertical surface of the adjoining walls are to be treated upto a height of 30cms including rounding of junction (the rate includes for complete items including labour and materials and including cost of initial treatment of roof slab as follows. The injunction of damp proof or equivalent compound with cement solution will be given as and when found necessary for filling honey comb, cracks etc. in the R.C.C. slabs). NOTE: cement consumption 25 kg/sq.m.
Making plinth protection 50mm thick of Cement Concrete 1:3:6 (1cement: 3 Coarse Sand: 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry laterite aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 including cutting of stone and making good the walls wherever required. Kitchen sink without drain board. with coupling & all accessories complete with choke stop strainer, Plain type having flat borders for correct sandwithing between theplaform top and bottom slabs complete.(a)Overall size 610mmx510mm (24"x20") bowl size 545mmx445mmx200mm (211/2"x 17 1/2"x 8") depth 200 mm. Glossy. 1.0mm thk,
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc.with hairline finish, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
Providing and and laying antiskid floor tiles 12 x 12 upto 16 x 16 in of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete
Dark Shades
Providing and fixing 1st quality ceramic glazed wall tiles (Johnson, Somany, Kajaria )conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade complete.(c)Wall Ceramic Glazed Tiles : 300 x 600
Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:
Dark Shades
Providing and fixing 1st quality ceramic glazed wall tiles (Johnson, Somany, Kajaria )conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade complete.(c)Wall Ceramic Glazed Tiles : 300 x 600
110 mm dia
75 mm dia
Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating.
Providing and fixing C.P. brass shower rose with 15 or 20 mm. Inlet:
150 mm diameter.
Providing and fixing NICKEL chrome plated copper alloy Fancy Pillar Cock rocket type Jaquar make or equivalent. Confirming to IS 8931;1993
Dark Shades
15mm nominal bore
Providing & fixing soap dish chromium plated with brackets fixed to wooden cleats with CP brass screw
Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door :
Providing & fixing c.p. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screws
600 x 20 mm size
Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleats with C. P. brass screws and washers.
600 x 20 mm size
Providing and fixing brass bib cock (heavy) of approved quality :
15 mm nominal bore
Providing and fixing brass stop cock (heavy) of approved quality
Providing and fixing brass full way valve (heavy) duty with wheel of approved quality :
15 mm nominal bore
20 mm nominal bore
Providing and fixing ball valve (brass) of approved quality
High pressure with P.V.C. floats:
Providing and fixing P.V.C. connection pipe with brass unions 15 mm nominal bore:
37.5 cm (15”) length .
Providing and placing on terrace roof of floor two (1st flor roof single piece rotational moulded polythene water storage tank having I S I mark and conforming to I S 12701; 1996.
1000 lit. capacity
Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per firectionof the Engineer in charge.(External work (heavy duty SDR 11 pipe)
40 mm nominal outer dia pipes.
Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards.
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching ,refilling & testing of joints complete as per direction of Engineer. External work. (I)SCH-80(blue)/(white)
20mm outer dia.
Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ;4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ;2 coarse sand :4 graded stone agrregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of n
eat cemetn and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design.
Inside size 60 x 60cm and 60cm deep including C.I. cover with frame (light duty) 455x610mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg).
Making soak pit. 2.5 m dia 3 m deep with 45x45 cm dry brick honey comb shaft and S.W. drain pipe 100 mm diameter, 1.8 m long complete filled with laterite stone aggregate 125 to 180 mm surrounded by laterite stone aggregate of 40 mm and down gauge as per standard design.
Providing & fixing colour coated Alluminium (PUF) sandwich panel roofing systems of approved make adhering to Aluminium 3105 grade for top & bottom sheet of thickness 0.40 & 0.35 respectively including PUF insulation betewwn the top & bottom sheet of Denslity 40 (+/-2) Kg/m3 inclusive of S.S.304 grade self tapping fastneres, complete as directed by Enigneer incharge (frame work for roof, roof accesorries to be paid seperately) for tile Design PUF roof panel, Gutter width should be atleast 25% more than the Crest width. Minimum height at heighest point of Crest should be minimum 65mm. Minimum thickness at anygiven point should not be below 30mm. (b)PUF Insulated tile roof 50mm thick of trapezoidal design
Providing & Fixing Alluminium Ridge of approved make adhering to Alluminium 3105 grade of 0.71mm thickness & 60 cm wide inclusive of SS304 grade self tapping fastners, to match the Alluminium roofing system & as directed by Engineer in charge complete
Providing & fixing in position Galvalume/Zincalume flashings, cappings, ridges, gutters upto 600mm/610mm girth and min 3.00m in length (cold Rolled Steel 550 MPa yeild Stress ASTM A 446 Grade E) with hot-dip metallic coating of aluminium-zinc alloy(AZ 150 galvalume) (150 gms/sqm total of both sides with Al-Zn Composition= 55% & 43.5% resp. & 1.5% Si conforming to ASTM 792/ AS 1397) 0.45 mm base metal thickness and 0.50mm total coated thickness, factory cut at all heights for roof, side & gable cladding complete in all respects with AZ 150 GSM SMP color Coated (20mic exterior coat of Silicon Modified Polyester paint system over 5 mic primer and 5 mic polyester back coat over 5 mic primer) incl. fixing to purlins with no 12x14x55mm mechanically galvanised hex head self drilling screws of the best quality as per AS-3566 class 3-4 approved, which should be compatible to be used with sheets. with integral washers and EPDM seals etc. Silicon sealant non-hardening neutral cure type shall be applied at all end laps, complete as directed.
UPVC false ceiling grid type : Providing and fixing UPVC False Ceiling consisting of 600mm x 600mm, 5mm(±0.25) thick Plain PVC sheet of 600 kg/Cbm Density Manufactured by an ISO- 9000 certified Company, used as panel insert in a frame work made using anodized aluminum T- section of sizes 1” x1” (25x25mm, 19 gauge or 1mm thick) in square pattern of grid sizes of 2’x2’(600x600mm). The aluminum frame work is supported from the ceiling with the help of 'J' hook and G.I. wire / 6mm M.S. rods of required sizes to maintain proper level etc. The aluminum framework is supported on side wall with the use of aluminum L-section of size 1”x1” (25x25mm) angles etc. Complete as per direction of Engineer-In-charge, manufacturer’sspecification & drawing.
Supplying and fixing Pre-cast cement concrete kerb-stones(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) of M-20 with 20 mm nominal size granitic/basaltic aggregate properly consolidated by mechanical plat-form and vibrators with smooth finish including fixing at site complete as per specification.
Size 30 cm L x 50 cm H x 15 cm T
Providing and fixing in position collapsible steel shutters with vertical channels 20 mm x 10 mm x 2 mm and braced with flat iron diagonals 20mm x 5mm size with top and bottom rails of T-iron, 40 x 40 x 6 mm with 38 mm dia. Steel pullys completely bolts locking arrangement, stopper, handles including applying a priming coat of red lead paint.
Supplying and fixing rolling shutters of approved make, made of 80 x 1.25 mm M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No.2 and M.S. top cover of 1.25mm thick for folling shutterstop cover and spring
Providing and fixing Ball bearings for rolling shutters
Extra for providing mechanical device, chain and crank operation for operating rolling shutters. (a)Exceeding 10.00 sq.m. and upto 16.80 sq.m. in area
Providing and laying a flexible waterprooing membrane(Black shield)with mixing ratio 1:1 for terrace,toilets,basements etc. complete as per the direction of the Engineer-in -Charge.
Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:50mm dia.
Providing and fixing Wash Basin - Under Counter Basin - Size 370 X 480 X 200 (CNS-WHT-701) with 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required.
Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:160mm nominal size
Construction of brick masonry inspection chambers of size 600x600x600mm internal dimension with cudappah stone cover slab for drainage lines as per the standard design and direction of the Engineer-in -Charge.
Providing and Fixing of “ AQUA STAR” PVC decorative rain water eaves gutter of size 220 mm, socketed with clamps, runnerdrop, stop end, stop and drop, plain inner elbows, bolts & nuts, washers etc. Complete as per the directions of the engineer-in-charge.
Providing, Cutting and fixing “ Itching Film” on glass complete as per the directions of the Engineer in charge.
Providing and fixing Flat back urinal ( Large ) “ Hindware Make or equivalent” alongwith ½” urinal push cock and fittings, R.S. or C.I. brackets, standard size, G.I. flush pipe and spreader fittings, G.I. clamps, complete, including painting the cistern & fittings cutting and making good the walls and floors where required.
Providing and fixing CERA CAMBELL make one piece Closet(EWC) or equivalent complete as per the directions of the Engineer-in-charge.
Providing and fixing Counsil wash basin without pedestal CERA make or equivalent with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required.
Supplying and placing of 4mm thick Al. Chequered plate over the electric trench openings , etc. Complete as per the directions of the engineer-in-charge.
18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge.
12mm cement plaster 1:4 (1 cement : 4 fine sand)
6mm cement plaster to ceiling 1: 4 (1 cement : 4 fine sand)
Neat Cement punning
Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Applying one coat of distemper primer of approved brand and manufacture on wall surface.
Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.
Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete.
Painting one or more coats of Damp proof paint of approved brand and manufacture(Such as Dulex/ Asian Paints/ Sherwin Willians) on old work including cleaning the surface with water etc. complete.
Supplying and stacking of good earth at site including royalty and carriage upto 1 km. (earth measured in stacks will be reduced by 20% for payment).
Spreading of sludge, dung manure or/and good earth in required thickness (cost of sludge, dung manure or/and good earth to be paid separately).
Providing and fixing G.I. chain link mesh 6.35cm x 6.35 cm x 10 gauge (2.5” x 2.5” x 10 gauge) fixed with angle iron posts and struts by G.I. or M.S. staples at 20cms apart with welding with the iron posts (placed at 3 meters centre to centre) including providing barbed wire stiffeners (shall weigh 9.33 kg. per 100 meters minimum) at top and bottom with barbed wire stiffers by binding wires at 50cms centre to centre complete as per the direction of the Engineer – in – charge (angle iron posts struts, earthwork and concrete for fencing posts and struts to be paid separately)
Painting (two or more coats) with aluminium paint of approved brand and manufacture on new work to give an even shade.
Providing weep holes of clear size 15 cms high and 8 cms wide in concrete walls as per drawing and direction of engineer in charge with 30 cms thick jungle wood planks to form a box of clear dimensions of the weep hole and keeping the same in position with a slope of about 1 verticle to 20 horizontal towards drainage face while laying the concrete complete.
Supplying of laterite stone soling of size 150-200 mm size and murrum having P.I. Value not more than 6 and laying including packing with smaller stones and consolidation with power road roller including spreading, watering and consolidation of binding material etc.(Measurements shall be considered on finished item) .
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3-wheeled steel/vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density.as per MORTH Specification 404
Grade - II
Providing and laying 50mm(consolidated thickness)full grout using granitic or basaltic stone of specified grading at 6.00 cu.m. per 100 sq.m. grouting with hot bitumen straight run bitumen(or with such bituminous material of grade and type as specified by the Engineer-in-Charge)at 5.0kg. per sq. m. binding with key aggregate of granitic or basaltic stone of specified grading at 1.5 cu.m. per 100 sq.m. including Providing and laying seal coat sealing the voids in a bituminious surface laid with F.E loader with 1 Cu.m. bucket capacity to the specified levels, grade and cross fall using Type A seal coat with 0.98 kg/sqm of bitumen of grade as per MoRT&H specifications clause 513.
Raising side shoulders with hard murrum including spreading watering and consolidation . using murrum from cut spoils
Supplying and fixing of Precast RCC slabs(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) at site in concrete Grade of M-25 with 20 mm nominal size Granitic or basaltic aggregate, consolidated by means of mechanical platform, vibration etc. with lifting hooks of M.s. 10mm bars and PVC cups including cost of reincforcement, Certificate from manufacturer shall be produced indicating grade of concret and minimum content of steel in the product along with 5 year free replacement warranty in case of breakage complete and as directed by Engineer -in -charge.
Size 900 x 400 x 100 mm with steel reinforcement not less than 5.0 kgs per unit -12 T capacity
size 750 x 400 x 100 mm cm with reinforcement not less than 4.2 kg per unit
Providing and fixing "100 % block out "type,vertical blinds for windows etc. complete as per the directions of the engineer-in –charge.
Supplying and spreading of 40/20mm basaltic or granitic stone aggregate in the switch yard.
Providing GI Barded wire fencing with 50 x 50 x 6 mm angle post at every 3.00m apart embedded in cement concrete block , corner and with 6 horizontal lines of barbed wire 9.38 kg / 100m minimum between two posts , fitted and fixed with G.I staples etc .
Supply, installation and commission of 3HP, 3PHASE submersible pump set for building for Electricity Department .
Sub Estimate 1 :
WORK OF SETC OF SUB-STATION EQUIPMENTS FOR PROPOSED 2X10MVA 33KV/11KV SONSODO SUB STATION.
33/11KV , 3phase,50 Hz, ONAN, outdoor, 10 MVA, copper wound, Power Transformer, filled with transformer oil (+10 % extra oil in non-returnable drums), Magnetic oil gauge indicator, winding temperature indicator and all other accessories including OLTC, remote control panel for OLTC, complete as per Technical specifications. ( end box on HV/LV)
Supply of 200K VA. 33/0.44KV Station Transformer, copper winding, with bimetallic terminal connectors, energy efficiency level 1. as per IS1180 (Part 1). Amendment No. 4 March 2021 (inclusive of MRT testing and transport) as per following specification given below
33KV PANEL FOR INCOMER PANEL 36 KV, 1250 A ( Busbar current - 1250A ) , 31.5 KA 3 Secs, 3 phase, indoor type VCB, with spring type operating mechanism, mounted on rack out type trolley, Inbuilt Earth switch, along with 3 Nos of 36 KV CT, 3 core, 400-200-/1-1 Amps, 33 KV/110/v3/110v3 V Line Potential Transformer. LV Compartment with Breaker control panel consisting of voltmeter , ammeter, MFM, BCPU NUMERICAL relays 61850 protocol with master and Trip Circuit supervision, VPIS, LED type indication lamps, TTBs, Annunciation, 3 phase , 4 wire , DLMS energy meter with 4G modem along with Software updation in the back end system for data integration with MDM. Complete as per Technical Specification.
33KV PANEL FOR 33KV BUS COUPLER 36KV, 1250A (Busbar current-1250A), 31.5KA 3 secs, 3 phase, indoor type VCB, with spring type operating mechanism, mounted on rack out type trolley, inbuilt earth switch, along with 3 nos of 36 KV CT, 3 core, 800-400-200-/1-1 Amps. LV compartment with Breaker control panel consisting of ammeter, MFM,BCPUNUMERICAL relays 61850 protocol with master and Trip Circuit supervision, VPIS,LED type indication lamps, TTBs, Annunciation, 3 phase, 4 wire, DLMS energy meter with 4G modem along with Software updation in the back end system for data integration with MDM. Complete as per technical Specification
33KV PANEL FOR BUS RISER CUM PT 33 kV Bus Riser Cum PT (Busbar current 1250A) 33KV/v3/110/v3/110/v3 Bus Potential Transformer. (PT shall be withdrawable type) with Voltmeter, VPIS, Inbuilt Earth switch for Bus Bar Earthing.
33KV PANEL FOR POWER TRANSFORMER 36 KV, 1250 A ( Bus bar current - 1250A ) , 31.5 KA 3 Secs, 3 phase, indoor type VCB, with spring type operating mechanism, mounted on rack out type trolley, Inbuilt Earth switch, along with 3 Nos of 36 KV CT, 3 core, 400-200-/1-1 Amps. LV Compartment with Breaker control panel consisting of ammeter, MFM, BCPU NUMERICAL relays 61850 protocol, Numerical Trafo Differential relay with master, Trip Circuit supervision and Trafo protection Aux relay, VPIS, LED type indication lamps, TTBs, Annunciation, 3 phase , 4 wire , DLMS energy meter with 4G modem along with Software updation in the back end system for data integration with MDM. Complete as per Technical Specification.
33KV PANEL FOR STATION TRANSFORMER 36 KV, 1250 A (Busbar current - 1250A), 31.5 KA 3 Secs, 3 phase, indoor type VCB, with spring type operating mechanism, mounted on rack out type trolley, Inbuilt Earth switch, along with 3 Nos of 36 KV CT, 3 core, 50/1-1 Amps. LV Compartment with Breaker control panel consisting of ammeter, MFM, BCPU NUMERICAL relays 61850 protocol with master and Trip Circuit supervision, VPIS, LED type indication lamps, TTBs, Annunciation, 3 phase, 4 wire, DLMS energy meter with 4G modem along with Software updation in the back end system for data integration with MDM. Complete as per Technical Specification.
33KV PANEL FOR OUTGOING PANEL 36 KV, 1250 A ( Busbar current - 1250A ) , 31.5 KA 3 Secs, 3 phase, indoor type VCB, with spring type operating mechanism, mounted on rack out type trolley, Inbuilt Earth switch, along with 3 Nos of 36 KV CT, 3 core, 400-200-/1-1 Amps. LV Compartment with Breaker control panel consisting of voltmeter , ammeter, MFM, BCPU NUMERICAL relays 61850 protocol with master and Trip Circuit supervision, VPIS, LED type indication lamps, TTBs, Annunciation, 3 phase , 4 wire , DLMS energy meter with 4G modem along with Software updation in the back end system for data integration with MDM. Complete as per Technical Specification.
33KV PANEL FOR 33KV BUS PT 33KV Bus PT (Busbar current 1250A) 33KV/√3/110/√3/110/√3 Bus Potential Transformer(PT shall be withdrawable type) with Voltmeter, VPIS, Inbuilt Earth Switch for Bus Bar Earthing
CONTROL AND RELAY PANEL FOR: INCOMER 12 KV, 1600 A (BB - 1600A), 25 KA 3 Secs, 3 phase, indoor type VCB, with spring type operating mechanism, mounted on rack out type trolley, along with 3 Nos of 12 KV CT, 3 core, 1200-800-/5-5-1 Amps, 11 KV/110/v3/110v3 V Line Potential Transformer. LV Compartment with Breaker control panel consisting of voltmeter, ammeter, MFM, B6BCPU NUMERICAL relays 61850 protocol with master and Trip Circuit supervision, LED type indication lamps, TTBs, Annunciation, 3 phase, 4 wire, DLMS energy meter with 4G modem along with Software updation in the back end system for data integration with MDM. Complete as per Technical Specification. (Incomer)
CONTROL AND RELAY PANEL FOR: OUTGOING FEEDER 12 KV, 630 A ( BB - 1250A ) , 25 KA 3 Secs, 3 phase, indoor type VCB, with spring type operating mechanism, mounted on rack out type trolley, along with 3 Nos of 12 KV CT, 3 core, 400-200-/5-5 Amps, LV Compartment with Breaker control panel consisting of voltmeter , ammeter, MFM, BCPU NUMERICAL relays 61850 protocol with master and Trip Circuit supervision, LED type indication lamps, TTBs, Annunciation, 3 phase , 4 wire , DLMS energy meter with 4G modem along with Software updation in the back end system for data integration with MDM. Complete as per Technical Specification. (Outgoing)
11KV PANEL FOR 11KV BUS COUPLER 12 KV, 1600 A ( BB - 1600A ) , 25 KA 3 Secs, 3 phase, indoor type VCB, with spring type operating mechanism, mounted on rack out type trolley, along with 3 Nos of 12 KV CT, 3 core, 1200-800-/5-5 Amps, LV Compartment with Breaker control panel consisting of voltmeter , ammeter, MFM, BCPU NUMERICAL relays 61850 protocol with master and Trip Circuit supervision, LED type indication lamps, TTBs,Annunciation, 3 phase , 4 wire , DLMS energy meter with 4G modem along with Software updation in the back end system for data integration with MDM. Complete as per Technical Specification. ( Bus Coupler)
11KV PANEL FOR BUS RISER CUM BUS PT 11KV Bus Riser Cum PT ( BB 1600A ) 11KV/v3/110/v3/110/v3 Bus Potential Transformer. ( PT shall be withdrawable type )
11KV PANEL FOR 11KV BUS PT 11KV Bus PT (Busbar current 1250A) 11KV/√3/110/√3/110/√3 Bus Potential Transformer(PT shall be withdrawable type)
30V, 150 Amp Hr, Valve Regulated Lead Acid (VRLA) type maintenace free batteries set at 10 hr discharge rate consisting of 16 Nos, each of 2 V, cell having terminal connectors, self supporting stack fully charged ready to use complete with all other accessories alongwith nut & Bolts, as per technical specs.
Supply Erection , testing & commisioning of Thyristor controlled Battery Charger set with full wave rectification, 3 phase, 440 V, 50 Hz, input voltage for charging above specified 30 V, 150 Amphr battery with provision for float and boost charging and automatic changeover with necessary indicating meters and annunciation, required cable, connectors complete as per Technical specs.
30 V, DC Distribution board/panel of sheet steel enclosed cubical floor mounting type for catering auxialiary DC power of the substation consisting of 1 No incomer (DP Air break switch/MCCB), changeover swich, 6 Nos outgoing feeders with HRC fuse, 1 No metering module consisting of Voltmeter & ammeter, power ON/OFF indication lamps, earth leakage relay DC fail alarm etc, complete as per Technical specs.
XLPE insulated armored 33KV(Type A2XFY, FRLS), 3 core 400 mm² aluminum cable
XLPE insulated armored 11KV (Type A2XFY, FRLS), 3 core 400 mm² aluminum cable
Unarmoured Single Core 120 sq.mm 1.1 KV grade for station trf and for interlink of AC panels
33 KV Heat shrinkable XLPE termination kit for 3 x400 Sq.mm. Cable outdoor type Suitable for heavily polluted atmosphere conditions with total creepage distance of 31mm/KV & protected creep age distance of not more than 50% of the total creep age distance, complying to IS:1255-1983.
33 KV Heat shrinkable XLPE termination kit for 3 x 400 Sq.mm. Cable indoor type Suitable for heavily polluted atmosphere conditions with total creepage distance of 31mm/KV & protected creep age distance of not more than 50% of the total creep age distance, complying to IS:1255-1983.
11 KV Heat shrinkable XLPE termination kit for 3 x 400 Sq.mm. Cable outdoor type Suitable for heavily polluted atmosphere conditions with total creepage distance of 31mm/KV & protected creep age distance of not more than 50% of the total creep age distance, complying to IS:1255-1983.
11 KV Heat shrinkable XLPE termination kit for 3 x 400 Sq.mm. Cable indoor type Suitable for heavily polluted atmosphere conditions with total creepage distance of 31mm/KV & protected creep age distance of not more than 50% of the total creep age distance, complying to IS:1255-1983.
Supply and laying in trench of 1.1kV Multistrand Copper Conductor, PVC insulated, Armoured control cable and conforming to IS: 1554(Pt I) 1988 as amended upto date alongwith cable glands and lugs complete as per technical specifications of the size 27 C x 2.5 sq.mm (Transformer Marshalling Box to Control & Relay Panel)
Supply and laying in trench of 1.1kV Multistrand Copper Conductor, PVC insulated, Armoured control cable and conforming to IS: 1554(Pt I) 1988 as amended upto date alongwith cable glands and lugs complete as per technical specifications of the size 19 C x 2.5 sq.mm (Transformer OLTC MB to RTCC Panel)
Supply and laying in trench of 1.1kV Multistrand Copper Conductor, PVC insulated, Armoured control cable and conforming to IS: 1554(Pt I) 1988 as amended upto date alongwith cable glands and lugs complete as per technical specifications of the size 12 C x 2.5 sq.mm (Transformer Marshalling Box to RTCC Panel)
Supply and laying in trench of 1.1kV Multistrand Copper Conductor, PVC insulated, Armoured control cable and conforming to IS: 1554(Pt I) 1988 as amended upto date alongwith cable glands and lugs complete as per technical specifications of the size 4 C x 2.5 sq.mm (Transformer OLTC MB to ACDB)
Cable Trays & Accessories Type 'B' cable trench two layers 450/75 mm wide
Cable Trays & Accessories Type 'B' cable trench two layers 600/75 mm wide
Procurement of materials, design of the structures, preparation of fabrication drawings, fabrication, Galvanising, proto-assembly, testing of lattice type structure for 33 KV switchyard and 11KV takeoff structure i.e. Towers, beams, lighting tower, Equipment support structure etc. (Fabricated from structural steel conforming to IS 2062) including Nuts, bolts, foundation bolts, washers & other accessories complete as per Technical specs.
Class B, 100 mm dia nominal bore, 3000 mm long pipe earth electrodes with test Connection links having welded flat of size 50 x 6 mm for connecting earth strip, RCC chamber, CI cover hinged to CI frame, other accessories as per Technical specs, alongwith required quantity of charcoal, salt etc or Bentonite to be buried below ground and to be connected with earth mat of MS Flat. i.e. Chemical Earthing.
Special Earthing Borewell type with 2 1/2 pipe 20 mts. deep in hard rock area
50 x 6 mm HDGI Flat for earth mat & risers.
Supply of 2KVA Isolation transformer(1:1) confirmimg the following specifications: Voltage input: 230V AC Output 230V AC unregulated Protection 10Amps MCB on Primary side & cartridge 16Amps on both the sides Indication LED + moving iron voltmeter 300VAC Material of widing Copper Rating 2KVA frequency 50Hz Class IP 42Input cable 5Mts long 3C cable with 3pin plug Output 02 Nos of sockets-5 pin-5Amps earth terminal on MS Enclosure.
OPR - 30 ABB or equivalent Make Lightning protection system, 5 M SS Mast with baseplate and guywire and Maintenance free earthing system
Sub Estimate 2:
WORK FOR SETC OF INCOMING FEEDERS using 33KV XLPE CABLES at Proposed 2X10MVA, at 33KV/11KV Sonsodo SUB-STATION
Providing drawings, planning , designing and obtaining approvals from competant authorities .
Electrical wiring including all tubelights, fans,Acs, security system with CCTV arrangment etc alongwith necessary fittings etc. complete
Supply of XLPE insulated armored 33KV(Type A2XFY, FRLS), 3 core 400 mm² aluminum cable
Earthing complete with 40mm GI Pipe, 2.5 mts long alongwith Batonite complete with brick masonary.
Supply and Laying of GI Flat 25 x 5 mm.(6m per earthing set)
33KV Touch proof screen connectors for 33KV RMU
Miscellanous works like providing lawn for garden area and rubber carpet over chequered plate, dusting carpet,name plate for cabins, Earthing pits etc works as directed by the Engineer -in-charge
Labour
-WORK FOR SETC OF OUTGOING FEEDERS using 11KV XLPE CABLES Proposed 2X10MVA, at 33KV/11KV Sonsodo SUB-STATION
4-Way 11KV RMU-4LBS, 11KV, 630A, 21KA, 3secs, SF6 Outdoor Ring Main Unit comprising of 4 nos. 630A isolators
Laying/Erection of XLPE insulated armored 33KV(Type A2XFY, FRLS), 3 core 400 mm² aluminum cable in open excavation trench or in cable tray/trench or on ground other than through HDD
Laying of 33KV HT UG cables of size 400sqmm by trenchless technology by adopting horizontal boring (HDD) . The work includes preparation of site, Boring as well as drawing of cable in Hard Laterite soil with minimum 9" bore size including supply and erection of HDPE pipe, 160mm, PN6, PE80, wall thickness 9.5mm(min) as per IS 4984:1995 Amendment 2016. The depth shall be 1.650m to 1850m only at entry and exit pits where minimum depth shall be 1200mm
Cable trench for 33 KV double circuit cable through conventional open trenching method in any type of soil including hard laterite (Inclusive of Eartwork in excavation, refilling, Supply and filling of Sand, supply and laying of bricks)
Cable trench for 33 KV single circuit cable through conventional open trenching method in any
Supply of 11KV, 3 core 300 sq.mm A2XFY Aluminium Armoured XLPE Cable
S.E.T & C Indoor type, heat shrinkable, three phase, end termination kit complete, for 11 KV XLPE cable of size 3 x 300sq.mm
S.E.T & C 11KV, three phase, Heat shrinkable, Straight Through Jointing Kit complete for XLPE cable of size 3 core 300sq.mm.
Supply & Erection of Cable route Markers (for entire route length)
Supply of XLPE insulated armored 33KV(Type A2XFY, FRLS), 3 core 400 mm² aluminum cable
Earthing complete with 40mm GI Pipe, 2.5 mts long alongwith Batonite complete with brick masonary.
Supply & Erection of Straight Through Markers (for entire route length)
SUB ESTIMATE 4
WORK FOR S. E. T & C OF ILLUMINATION OF APPROACH ROAD TO THE Proposed 2X10MVA, at 33KV/11KV Sonsodo SUB-STATION (Indoor type)
S.E.T.C. of HDGI, 8.0mts long Octagonal tapered Poles made out of 4mm thick plate (Top 70mm, Bottom 155mm) and having the following provisions and of make:- Bajaj Electrical Ltd., Transrail, Hakke Industries Pvt. Ltd. and Utkarsh India Pvt. Ltd. a. Hot rolled stud plate confirming to grade S355JO b. Base Plate steel of size 225 x 225 mm, thickness 16mm confirming to IS226/IS2062 c. 1.5mts long triple arm brackets HDGI, 3.25mm thick for mounting the fixture of outer diameter 50mm. d. 50mm dia HDPE pipe, PN-4, P-63 Grade 2.65mm for cable entry and exit (2) runs). e. Door opening of approx. length 500mm at a elevation of 500mm from the base plate f. along with a Set of 4 nos. J type M20 (UNF Thread - 100mm) foundation bolts of grade EN 8 & IS1367 of suitable length for 6mtr/pole.
S.E.T.C. of HDGI, 8.0mts long Octagonal tapered Poles made out of 4mm thick plate (Top 70mm, Bottom 155mm) and having the following provisions and of make:- Bajaj Electrical Ltd., Transrail, Hakke Industries Pvt. Ltd. and Utkarsh India Pvt. Ltd. a. Hot rolled stud plate confirming to grade S355JO b. Base Plate steel of size 225 x 225 mm, thickness 16mm confirming to IS226/IS2062 c. 1.5mts long double arm brackets HDGI, 3.25mm thick for mounting the fixture of outer diameter 50mm. d. 50mm dia HDPE pipe, PN-4, P-63 Grade 2.65mm for cable entry and exit (2) runs). e. Door opening of approx. length 500mm at a elevation of 500mm from the base plate f. along with a Set of 4 nos. J type M20 (UNF Thread - 100mm) foundation bolts of grade EN 8 & IS1367 of suitable length for 6mtr/pole.
S.E.T.C. of HDGI, 8.0mts long Octagonal tapered Poles made out of 4mm thick plate (Top 70mm, Bottom 155mm) and having the following provisions and of make:- Bajaj Electrical Ltd., Transrail, Hakke Industries Pvt. Ltd. and Utkarsh India Pvt. Ltd. a. Hot rolled stud plate confirming to grade S355JO b. Base Plate steel of size 225 x 225 mm, thickness 16mm confirming to IS226/IS2062 c. 1.5mts long single arm brackets HDGI, 3.25mm thick for mounting the fixture of outer diameter 50mm. d. 50mm dia HDPE pipe, PN-4, P-63 Grade 2.65mm for cable entry and exit (2) runs). e. Door opening of approx. length 500mm at a elevation of 500mm from the base plate f. along with a Set of 4 nos. J type M20 (UNF Thread - 100mm) foundation bolts of grade EN 8 & IS1367 of suitable length for 6mtr/pole.
Supply and Installation of LED lights fixture fitting 214W
Supply & Installation of ThreePhase (9KVA) Central Control and Monitoring System (CCMS) Street light Control Panels for underground cable network including grouting work consisting of following: 1 )HDGI stand (a per IS 2629/66. minimum zinc coating of 1000 gms/sq. mtr, 140 Microns DFT) for mounting CCMS Panel (Drawing attached) - I No. 2) Supply and termination of 4 core, 4 storm. multicorc, PVC, Round Copper flexible Cable, 1100 Volts. CONFORMING TO IS: 694/2010 along with lugs and Cable glands:-3Mtr. 3) Earthing set for CCMS Panel as per attached drawing no. CEF)E- 829-1 Set
Supply and Installation of 6 Amps MCB for Octagonal Poles
Supply of 1.5 meter x 40 mm long rigid PVC pipe dia with bend/tee for cable entry and exit.
Supply and Laying P.V.C. Copper Cable(unArmoured , flexible) 2 Core x 2.5 sq.mm. (from junction box to LED fixture)(10m per LED Fixture)
Supply and laying of XLPE underground cable armoured 3 1/2 C 25 sq.mm 1.1 KV Grade
COMPRESSION TYPE ALUMINIUM TUBULAR TERMINAL ENDS (LUGS) Aluminum crimping lugs of size 25 sq mm Aluminum crimping lugs shall conform to IS: 8309-1976 as amended upto date. Lugs shall be made of aluminium of grade 1E of IS 5082-1969
Earthing complete with 40mm GI Pipe, 2.5 mts long alongwith 20 kgs each salt, charcoal complete with brick masonary/chamber(as per CEE approved drawing, enclosed) (Earthing for each pole)(double bolted/earthed)
type of soil including hard laterite (Inclusive of Eartwork in excavation, refilling, Supply and filling of Sand, supply and laying of bricks)
Supply and Laying of GI Flat 25 x 5 mm.(3m per earthing set)
GROUND PENETRATING RADAR SURVEY (G.P.R): a) Scanning the roads using Ground Penetrating radar at every 20 meters interval. b) Identification of metallic and non metallic utilities such as water pipelines, o.f.c, gas lines and any other existing utilities along with depth.
Laying of 11KV HT UG cables of size 300sqmm by trenchless technology by adopting horizontal boring (HDD) . The work includes preparation of site, Boring as well as drawing of cable in Hard Laterite soil with minimum 9" bore size including supply and erection of HDPE pipe, 160mm, PN6, PE80, wall thickness 9.5mm(min) as per IS 4984:1995 Amendment 2016. The depth shall be 1.650m to 1850m only at entry and exit pits where minimum depth shall be 1200mm
Pin up board fabricated from plywood backed soft boardwith flannel coveringof chosen alluminium border size 4'x3'
Chalk less board fabricated from plywood backed white board with alluminium border size 4'x3'
Laying of 11KV, 3 core 300 sq.mm A2XFY Aluminium Armoured XLPE Cable in open excavation trench or in cable tray/trench or on ground other than through HDD
Cable trench for 11 KV double circuit cable through conventional open trenching method in any type of soil including hard laterite (Inclusive of Eartwork in excavation, refilling, Supply and filling of Sand, supply and laying of bricks)
Supplying of Sand and filling in plinth under floors, trenches including watering ramming consolidating, dressing, complete.
Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in : All kinds of soil
Refilling the trenches plinth sides, with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.
for the Construction of 33/11kv Control room at Sonsodo Fatorda-Goa.
Earthwork in surface excavation not exceeding 30 cm depth(but exceeding 1.5 m width as well as 10 sq.m on plan) including disposal of excavated earth beyond work site for all leads lift disposed earth to be leveled and neatly dressed in:
Ordinary soil
Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in :
All kinds of soil
All types of Ordinary rock including all types of laterite rock, blasting prohibited
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 21.51 MB
Tendernotice_2.pdf
PDF • 34.46 MB
BOQ_27058.xls
BOQ • 0.75 MB
Download all tender documents and submit your bid