Repairing of electrical installation, light and fans at T E Bharat Kund and repairing of electrical installation, submersible pump, light and fans at T E Darshan Nagar, Ayodhya .

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. (a)100 mm X 100 mm X 60 mm deep

(b) 180 mm X 100 mm X 60 mm deep

© 200 mm X 250 mm X 60 mm deep

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (a) 20mm dia

(b) 25mm dia

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required (a) 1 x 1.5 sq. mm

(b) 2 x 1.5 sq. mm

© 3 x 1.5 sq. mm

(d) 1 x 4 sq. mm

(e) 3 x 4 sq. mm

Dismantling of the existing faulty electrical wirings and installtions from the rooms and kitchen of IQ for drawing of wires and installtion of electrical items etc complete as required.

S/F of DP sheet steel enclosure on surface/ recess alongwith 25/32 A 240 volt C curve DP MCB complete with connection, testing and commissioning etc. as reqd. (AC point)

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required

Supply/ fixing of following faulty items in existing switch boards/ meter boards/ MCBDBs etc. i/c connection, testing etc. complete as required (a) 5 A switch

(b) 5 Amp 3pin Socket

© 15 Amp Switch

(d) 15 Amp 6pin Socket

(e) Button holder

(f) ceiling rose

(g) PVC round sheet 3"

(h) electronic fan regulator

(i) 2 way 5/6 A switch

Supplying and fixing of 2mm thick phenolic sheet on the existing switch board i/c cuttung etc. cpmplete as required.

Supplying installatin testing and commissioning of 1200 mm sweep ceiling fan 230 volts 50hz AC supply complete with down rod i/c wiring the down rod with connection, testing etc as reqd.

Supplying and fixing of 20 Watt 120mm long LED tube light fitting i/c connection, testing etc. complete as required

Supplying and fixing of 09 Watt LED bulb in the existing angle holder etc. complete as required

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Supplying and fixing 4way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying & Fixing of following rating 240/415 volt MCB of single/four pole in the existing MCB DB complete with connection, testing and commissioning etc. as required. (a) 6A - 32 Amp. 'C' series SPMCB

(b) 63Amp Four Pole Isolator

© 40Amp Double Pole Isolator

Supply of one number PVC insulated and PVC sheathed / XLPE insulated aluminium conductor power cable of 1.1 KV grade of Two core 6 sq. mm. as required including transportation etc as required. (for Campus light)

Supply of one number PVC insulated and PVC sheathed / XLPE insulated aluminium conductor power cable of 1.1 KV grade of four core 16 sq. mm. as required including transportation etc as required.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of Upto 35 sq. mm on wall surface as required.

Supplying and making end termination with brass compression gland and aluminium lugs for 4x16 sq mm PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Supplying and making end termination with brass compression gland and aluminium lugs for 2 core 6 sq mm of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

S/F of 30 watt LED street Light fitting i/c connection, testing etc complete as reqd (Havells or ss make)

Supplying and fixing of 32 mm dia X 1.50 metres long G.I. pipe (medium class) bracket for mounting of street light fitting on pole including bending the pipe to the required shape, 2 nos 20 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required

Supply and wrapping the G I barbed wire on the GI bracket for protection of fittings from monkeys etc complete as required

Supply and placing of 10mm thick rubber mat for the LT supply grade in front of HT panels etc complete as required.(fot TE Barabanki)

Sub Head-II (Pump repairing work) Dismantling & lifting and lowering of of existing 1HP submersible pump with help of labour from the existing borewell with all its accessories etc complete as required.

Rapairing of submersible pump set of 1.0 HP capacity suitable for operation on 1 phase 240Volts, 50hz AC supply including winding of submersible motor, repairing of impellers of pump, griding on legth mechine, replacement of bush etc complete as required.

Dismantling & lifting and lowering of of existing Hand pump with help of labour from the existing borewell with all its accessories etc complete as required.

S/F of 3 core 1.5 sq mm PVC insulated and PVC sheathed flat copper conductor submesible cable complete as reqd.(HPL/Finolex or ss make)

SITC of start controller panel for 1HP capacity single phase 220 volts 50 Hz AC supply 2850 RPM submersible pump set etc. complete with connections, fixing on wall etc as required

S/F of 6mm dai pvc insulated steel wire rope for holding the pump etc complete as required.