Rate Contract of Internal Wiring and Associated works at M.P. Airport Udaipur. (2025-26)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in medium class PVC conduit recessed with replastering to original finish with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. (Switches shall be of Make: Gold Medal & Model: Alpha)

Group A

Group B

Group C

Wiring for light/ power plug with 4X4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in medium class PVC conduit recessed with replastering to original finish along with 2 Nos. 4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in medium class PVC conduit recessed with replastering to original finish as required.

2X2.5sq. mm +1 X2.5sq. mm earth wire

2X4sq. mm +1 X4sq. mm earth wire

Supplying and drawing following sizes of FRLS/HFFR PVC insulatedcopper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

1 x1.5sq. mm

2x1.5sq. mm

2x2.5 sq. mm

3x2.5 sq. mm

2x4 sq.mm

3x4 sq. mm

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch (Gold Medal Alpha )

15/16 A switch (Gold Medal Alpha )

3 pin 5/6 A socket outlet (Gold Medal Air Aura or equivalent)

6 pin 15/16 A socket outlet (Gold Medal Air Aura or equivalent)

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing following size/ modules, Gl box alongwith modular base & cover plate for modular switches in recess etc as required.

1 or2 Module (Gold Medal Bella or equivalent)

4 Module (Gold Medal Bella or equivalent)

6 Module (Gold Medal Bella or equivalent)

8 Module (Gold Medal Bella or equivalent)

12 Module (Gold Medal Bella or equivalent)

3 Module(Gold Medal Wega Pure Glossy or equivalent)

6 Module (Gold Medal Wega Pure Glossy or equivalent)

8 Module (Gold Medal Wega Pure Glossy or equivalent)

12 Module (Gold Medal Wega Pure Glossy or equivalent)

Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6Amodular switch, connection etc. as required. (Switches and socket outlets shall be of Make: Gold Medal & Model: Alpha)

Supplying and fixing suitable size GI box with modular plate and cover in FRLSont on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16Amodular switch, connection etc. as required. (Switches and socket outlets shall be of Make: Gold Medal & Model: Alpha)

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.

Group B

Group C

Supplying & fixing suitable size Gl box with modular plate and cover in front on surface or in recess i/c providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connection, painting etc. as required. (Socket outlets shall be of Make: Gold Medal & Model: Alpha)

Supplying and fixing PVC batten/ angle holder including connection etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/lsolator)

4 way (4+12), Double door

6 way (4+18), Double door

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 As tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

8 way (8 + 24), Double door

Supplying and fixing 5A to 32A rating, 240/415 volts, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Double pole

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Laying of 90 mm dia (OD-90 mm & ID-76 mm nominal) size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. (Pipe will be provided by AAI)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

Above 95 sq. mm and upto 185 sq. mm

Above 185 sq. mm and upto 400 sq. mm

Supplying and fixing of IP 65 SMC junction box moulded with inside knock outs of following size with hinged cover,PU gasket, locking arrangement, duly holded with 2 nos. pole clamps with nut and bolts, The box shall be provided with Din rail, 4 / 8 way 10.0 / 16.0 sq.mm heavy duty connector, earth terminal, complete in all respect. 240mmx130mmx110 mm

Cutting of granite flooring 1" wide & 2.5 " deep , breaking the PCC , Supply & fixing granite of similar shade of 1"width & 2" depth after levelling for making good the same as original finish in SHA of Terminal Building.

Dismantling of existing metallic conduit wiring i/c DB, conduits, switches, sockets, concealed boxes , exhaust fans, ceiling fans, other fittings etc. of following type quarters including disconnection from circuit and shifting & handing over at AAI dismantling store etc. complete as required.

Type A/B Residential Quarters

Type C Residential Quarters

Type E Residential Quarters

Supply of 4 C x 4 sqmm industrial cable, PVC insulated and FRLS PVC round sheathed, copper conductor (flexible), 1.1 kV grade as per IS: 694: 2010 or as amended.

Supply of 3 C x 2.5 sqmm industrial cable, PVC insulated and FRLS PVC round sheathed, copper conductor (flexible), 1.1 kV grade as per IS: 694: 2010 or as amended.

Supply of 3C x 1.5 sqmm industrial cable, PVC insulated and FRLS PVC round sheathed, copper conductor (flexible), 1.1 kV grade as per IS: 694: 2010 or as amended.

Supply of 3 C x 4 sqmm industrial cable, PVC insulated and FRLS PVC round sheathed, copper conductor (flexible), 1.1 kV grade as per IS: 694: 2010 or as amended.

Supply of 1 x 2.5 sqmm wire flexible, FRLS, PVC Insulated Industrial grade copper conductor (unsheathed), 1100 volt conforming to IS 694.

Supply of 1 x 1.5 sqmm wire flexible, FRLS, PVC Insulated Industrial grade copper conductor (unsheathed), 1100 volt conforming to IS 694.

Supply of 1 x 4 sqmm wire flexible, FRLS, PVC Insulated Industrial grade copper conductor (unsheathed), 1100 volt conforming to IS 694.