Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.8 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹40.0 L+₹43,082 (1.09%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹41.6 L+₹2.1 L (5.21%)Rejected-Finance A SECTOR BHAGWATI BHAVAN VIJAY NAGAR LAL GHATI BHOPAL M P 462030 | BHOPAL | BHOPAL | MADHYA PRADESH | 462030 | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹44.1 L+₹4.6 L (11.5%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹44.7 L+₹5.2 L (13.1%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹49.4 L
EMD Value
₹98,800
Closing Date
18 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BHOPAL
GE BHOPAL BAIRAGARH BHOPAL
SPL REP TO ROOF OF BLDG NO P 316 ADM BLOCK OF SCC 10 SRW AND PROVN OF AREA DRAINAGE SYS AT VARIOUS LOCATIONS 07 LBW AT SI LINES UNDER GE BHOPAL
2023_MES_576132_1
8942/E8
Open Tender
Civil Works
Item Rate
183 days
BHOPAL
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE BHOPAL
₹98,800
Yes
17 Mar 2023
20 Jan 2023
20 Feb 2023
20 Jan 2023
18 Feb 2023
6 Feb 2023
Amount
Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline
Taking up or down 15mm dia steel tubing and connection and including cleaning for refixing or removal to stores, complete all as specified and directed.
Taking up or down 20mm dia steel tubing and connection and including cleaning for refixing or removal to stores, complete all as specified and directed.
S&F Steel water tubes, medium grade, ISI marked, galvanised, 15 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.
S&F Steel water tubes, medium grade, ISI marked, galvanised, 20 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.
S&F in repairs 20mm ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.
S&F in repairs 15mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed, complete all as specified and directed.
S&F in repairs 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed, complete all as specified and directed.
M&L for Brick work with fly ash bricks (Modular), straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.
Demolition of brick work or stone masonery built in cement mortar, complete all as specified and directed.
M&L for 15 mm thick rendering in cm 1:4 on fair faces of bricks walls surface finished even and smooth without using extra cement including water proofing compound, complete all as specified and directed. (Note : Water proofing compound shall be measured and paid separately)
M&L for 15mm thick rendering in CM 1:6 on fair face of brick walls/ concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed.
Taking down cement or cement lime plaster, any description, on brick or stone walls, ceilings, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to end or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed.
M&L for cutting holes in brick walls exc half brick but not exc one brick in cement mortar ore cement lime mortor for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, complete all as specified and directed.
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc and hosting if required, reconneting and refixing in position capacity exc 500 and n exc 1000 ltr. including cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipes etc, complete all as specified and directed.
Refixing old steel tubing 20 mm bore, with and provision of new fittings (connections) in new or old position (walls, ceiling, floors, etc) complete all as specified and directed.
Refixing old steel tubing 15 mm bore, with and provision of new fittings (connections) in new or old position (walls, ceiling, floors, etc) complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed.
S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches, floors or fixed to walls, 110 mm bore complete all as specified and directed.
S&F PVC (SWR) bends any radius, 110 mm bore complete all as specified and directed.
S&F PVC (SWR) branch piece single (Y) equal or unequal bend, 110 mm bore, complete all as specified and directed.
S&F PVC (SWR) junction single (single T), equal or unequal, 110mm bore complete all as specified and directed.
S&F PVC (SWR) vent cowl, 110mm bore complete all as specified and directed.
Supply only integral water proofing compound complete all as specified and directed.
Taking down existing old roof treatment of any description, type and in any position including removal of old tiles, screed, felt, etc complete all as specified and directed.
M&L for water proofing roof treatment to Non accessible RCC roof with APP modified membrane with non woven polyster reinforced wt not less than 3.5 Kg/Sqm of thickness not less than 3 mm having thermal insulation with white mineral/ gravel finish on upper side of membrane uniformely embedded during manufacturing process . All as per following sequence and specifications: (a) Complete removal of existing treatment including padding/plastering/PCC/Brickbat/coba or any type water proofing as per Item No. 25. (Note:- This item will be measured and paid under item No. 25) (b) Conduct ponding test for 72 hrs, after ponding test grouting is to be done as per item No 27 at the leakage area. (Note : Ponding test will be paid under item No. 30) (c ) After the surface is repaired with pressure grouting the slab will be tested for water tightness again for 72 hrs before processing further treatment. (Note : Ponding test will be paid under item No. 30) (d) 10mm thick plaster in CM 1:4 mixed with and including water proofing compound @ 3% by wt of cement applied over roof slab. (Note : This item will be measured and paid separately under item No.29) ( e) The surface of the roof, parapet and gutters, drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matters such as fungus, mass, dust etc. By wire brushing and dusting. For cast iron drain outlets the grow shall be cut around to tuck in the treatment as pipes, chimneys stacs etc and other similar situations to ease up about corners.
Item No. 26.00 Contd…. (f) Bituminous primer 85/25 blown type @1.2 Kg/sqm to be applied and prepared the surface till surface is properly impregnated. (g) APP modified water proofing membrane as specified shall be laid on the primer surface by torch application method as per manufacturers instruction, the overlaps while torching shall be 100mm in both directions (longitudinal and transverse directions). All overlap joints shall be sealed thoroughly by thermofusing both the membrane layers and sealing it with the help of hot trowel. The overlap joints shall be made as monolithic layer. (h) All joints and changes in direction should be curved with cement mortar 1:3 mixed with SVR latex @200ml per bag of cement and cured well before laying the memebrane. (j) M&L Providing cement concrete type B0 1:2:4 ( using 12.5mm graded stone aggregate) as in for padding of roof, parapets, roofkerbs, copings and the like including weathering, slightly rounded for chamfered angles, filleting/beching and throating, complete all as specified and directed (Note : This item will be measured and paid separately under item No. 28) (k) Two coat of silver paint over APP modified membrane after installing over the roof (quoted rates shall be deemed to include the same). (l) 72 hrs testing of treatment for water tightness by ponding of water. (Note : Ponding test will be paid under item No. 30)
M&L for grouting by pressure injection with cement slurry of 50kg cement mixed with pidicrete SM-225 gms of M/S pidilite industries ltd or Cobex 100 of M/S Fosroc Chemicals as per instruction, complete all as specified and directed.
M&L for providing cement concrete type B0 1:2:4 ( using 12.5mm graded stone aggregate) as in for padding of roof, parapets, roofkerbs, copings and the like including weathering, slightly rounded for chamfered angles, filleting/beching and throating, complete all as specified and directed
M&L for 10 mm thick rendering in cm 1:4 on fair faces of bricks walls/concrete surface finished even and smooth without using extra cement including water proofing compound all as specified and directed. (Note : Water proofing compound shall be measured and paid separately)
M&L for carrying out ponding test for 72 hrs, after carrying out of grouting and roof treatment as per item No 26(b), (c ) & (k) complete all as specified and directed. Note : All three stages of ponding shall be measuresd as one unit
S&F Rotational moulded (three layered, ISI marked) polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity including PVC cover, hoisted and fixed in position including connecting up pipes complete all as specified and directed.
Dismantling water storage tanks and removing to store of capacity n.exc. 1000 ltrs complete all as specified and directed
Taking down chowkats or frames exc 1.50 Sqm but n.exc 4 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed
Taking down chowkats or frames n exc 1.50 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed
Taking down shutters of any descripition exc 1sqm but n exc 2sqm each and removing to or from store, complete all as specified and directed
Taking down shutters of any descripition n exc 1 sqm each and removing to or from store, complete all as specified and directed
Demolition of concrete in ground floors and pavings (un reinforced) nexc 15 cm thickness (below or above ground level) complete all as specified and directed
S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165, complete all as specified and directed
M&L Providing cement concrete type B1 1:2:4 (20mm graded aggregate) as in roof kerbs or mud stops, copings an levelling concrete etc slightly rounded or chamfered angles and throating, complete all as specified and directed
M&L for Second class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.
S&F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, with & including filing of cement concrete typ B-0, 1:2:4 using 12.5mm graded stone aggregates inside frames complete all as specified and directed.
M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed
Supplying, fabricating and fixing powder coated (minimum thickness 50 micron) aluminium sections of required size for door windows frames shutters and partitions including aluminium hinges of required size jointing cleats, screws sash fasteners, plug for fixing with walls, columns, etc complete all as specified and directed.
S&F 4.8mm thick plain sheet glass ordinary quality nexc 0.50Sqm in each pane, complete all as specified and directed.
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.
S&F 100mm size butt hinges medium weight cold rolled mild steel, complete all as specified and directed.
S&F 75mm size butt hinges medium weight cold rolled mild steel, complete all as specified and directed.
S&F in repairs door closer hydraulically regulated, designation No 3, universal type, of aluminium extruded section body suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed
S&F 150 mm long aluminium handles, cast type, anodised fixed to shutters complete all as specified and directed.
S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 300mm Aluminium sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.
S&F 40 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type with decorative laminated on both sides complete and fixed to chowkats, complete all as specified and directed.
M&L for factory made second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and directed.
M&L for factory made, second class hardwood 35mm thick plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.
S&F in repairs 300mm, ordinary MS rat tailed rod pattern springs including roller and roller plate complete all as specified and directed.
M&L for Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, 75mm thick, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed.
M&L for Preparation new wooden surface of any decription and applying two coats of synthetic enamel painting over a coat of pink primer all as specified and directed.
M&L for Preparation old wooden surface of any decription and applying two coats of synthetic enamel paint, complete all as specified and directed.
M&L for applying 3mm thick wall care putty on wall/ceiling, complete all as specified and directed.
M&L preparation of old painted surfaces of steel and iron surface of any description and applying two coats of synthetic enamel paint complete all as specified and directed.
M&L for preparation of new steel surface of any description and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified and directed
M&L for preparation of new plastered surfaces of wall and applying two coats of oil emulsion distemper over one coat of white cement based putty, complete all as specified and directed. (Note : Putty shall be measured and paid separately)
M&L for complete removal existing treatment and applying two coats of oil emulsion distemper over one coat of white cement based putty, complete all as specified and directed. (Note : Putty shall be measured and paid separately)
M&L for Factory made, machine pressed, M-35 grade concrete interlocking paver blocks (glossy /reflective type), with grey cement and pigment, any shape and size conforming to IS:15658-2006 (ISI Marked) of 60 mm thickness with & including 50 mm thick sand cushion and joints filled with sand complete all as specified and directed.
S&F in repairs decorative stainless steel mild steel powder coated 25mm dia, minimum thickness 1mm curtain rod with powder coated side fixing brackets, rings and decorative knobs complete all as specified and directed
M&L for cutting grooves in concrete/brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove by using wire netting of of galvanised steel wire with cement mortar 1:3 complete all as specified and directed. Note :- Galvanised steel wire netting shall be measured and paid separately.
S&F galvanised steel wire of mesh in size 12mm, 1.40mm nominal dia of wire and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.
M&L for ShaliCryl ® 215 single component, UV resistant, unique elastomeric, high build exterior waterproofing coating based on a revolutionary acrylic polymer with quick-set capabilities to resist moisture attack, complete all as specified and directed. (a) Surface Preparation :- Remove all loose and foreign materials, if any, by a wash with a jet of air / water. • Repair structural defects before application of ShaliCryl® 215. • Fill voids and undulation area with Polymer Mortar made out of ShaliSBR Latex, Water, Cement and Sand in the Ratio of 1:1:5:12.5. • Fill cracks up to 3 mm with PlastiSeal and cracks over 3 mm with PlastiSeal P after opening the crack to a “V” cut. • In case of any poor plaster surface in existence (for old building), remove the same and corrected with new cement : sand in the ratio of 1 : 4 admixed with ShaliPlast LW+ @ 200 ml / bag of cement. (b) Primer Application :- Apply ShaliPrime WB as Primer after dilution with potable water in the ratio 1:0.5 for a theoretical Coverage 8-10 m2 / L of the mix and allow it to dry for 3 – 4 hrs. post elimination of undulation, roughness of concrete, joint marks, Voids and any other surface correction. (c) Application of Material :- Apply first coat of ShaliCryl® 215 over the primed surface @ 160 ml / m2 . Add maximum of 10% potable water by volume for the first coat only, if required, to have brushable consistency only. • Allow the applied coating to dry 6 – 8 hrs of application. • Apply second coat of ShaliCryl® 215 without dilution over dried first coat @ 140 ml / m2 and allow it to dry. • Do not undertake any further work over the coated area within 72 hrs of final coat. • A coat of 100 micron of ShaliCryl TC 100 will improve water / dust repellent property.
M&L for Glazed ceramic coloured tiles 350mm x 250mm x 7mm thick or 450mm x 350mm x 7mm thick, in vertical surfaces such as skirting, dados and risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 10mm thick rendering in CM 1:3 complete all as specified and directed.
M&L for Non skid ceramic coloured tiles 7mm to 8mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L for vitrified ceramic tiles light shade 10 mm thick (square/ recangular) polished, area of each tiles not exceeding 0.36 sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles. over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
M&L 25mm thick PCC type B-1 1:2:4 (20mm graded aggregate) as in sub base of floor, complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
S&F 15 mm wash basin mixutre, centre hole, mixing hot & cold water, fancy type, cast copper alloy, chromimum plated with capstan head, chromium plated, screwed down high pressure, screwed for iron pipe etc and fixed in repairs complete all as specfied and directed.
S&F in repairs wall mixture telephonic with crutch for mixing hot & cold water, fancy type, chromium plated, screwed for iron pipe or for unions 15mm bore, with & including hand shower & tube complete all as specified and directed.
S&F hand shower (health faucet) brass with 1.0 mter long flexible tube and wall hook complete all as specified and directed.
S&F Chromium plated grating doom 100 mm dia with waste hole, complete all as specfied and directed.
S&F PVC connection 15mm size with PTMT nuts of length 750 mm fixing complete all as specified and directed by engr in charge.
S&F in repairs 15 mm stopcock cast copper alloy, screwed down high pressure chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed
S&F in repairs 15 mm bib taps fancy type cast copper alloy, screwed down high pressure chromium plated screwed for iron pipe and fixed complete all as specified and directed.
S&F in repairs vitreous china wash down water closet pan, pedestal pattern, ISI marked, white, including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.
S&F in repairs PVC low level flushing cistern 10 litres capacity, ISI marked, white, with all fitting and fixtures including brackets, PVC connection of 450mm long and 32 mm bore PVC flush pipe, complete all as specified and directed.
S&F in repairs Wash hand basin, Vitreous China (flat back or angle back type and of size 550x400mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.
S&F in repair PVC Flexible waste pipe 32 mm dia with socket for steel sink upto floor level and length not less than 0.60 M complete all as specified and directed.
M&L PVC (SWR) floor trap plain with grating incl jointing with solvent cement 75mm bore complete all as specified and direcetd.
S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches, floors or fixed to walls, 75 mm bore complete all as specified and directed.
S&F PVC (SWR) bends any radius, 75 mm bore complete all as specified and directed.
S&F PVC (SWR) branch piece single (Y) equal or unequal bend, 75 mm bore, complete all as specified and directed.
S&F PVC (SWR) junction single (single T), equal or unequal, 75mm bore complete all as specified and directed.
S&F PVC (SWR) vent cowl, 75mm bore complete all as specified and directed.
S&F in repairs table counter top, white wash hand basin with provision of stainless steel bottle trap complete all as specified and directed (Make : Jaquar Cat Part No. JDS-WHM-25911or equivalent make as per Appx 'C' (list of make) as approved by GE]
S&F in repair of vitreous China wash down water closet pan, casket type (pedestal pattern), with integral seat cover and flush tank, coloured (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed (Make : Hindware Cat Part No. 92045 or equivalent make as per Appx 'C' (list of make) as approved by GE]
M&L for Reinforced cement concrete design mix M-25 in slabs supported on walls, beams & columns complete all as specified and directed.
Use and waste of form work to soffits of suspended slabs as in roof slabs, floor slabs, landings and similar work not exceeding 200mm thick for rough finished flat surfaces, complete all as specified and directed.
S&F Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
M&L 12 mm thick Plywood grade BWP, type BB fixed with screws to timber frame work, complete all as specified and directed
M&L 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturers instructions, complete all as specified and directed
S&F in repairs Continuous (piano) hinges, 40mm width of flaps mild steel, bright finish or electrogalvanised, complete all as specified and directed
S&F Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12.5 cm wide with chromium plated bracket guard and railing 50 cm long complete all as specified and directed.
M&L for shifting and refixing of existing cables and Acs etc at the same place, laid on roof of the building disturbed during the roof treatment of the building, complete all as specified and directed. (Note : Refixing after roof treatment and making the equipment functional and rectification of damage if any, is included in the rate.)
M&L for providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment along external wall where the apron is nor provided using chemical emulsion at the rate of 7.5 litres per Sqm of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed
M&L for injecting chemical emulsion for Post Constructional Anti-termite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed
S&F 12 mm thick, toughen glass as in doors, partiotions, window or other similar works in approved shape and design with necessary steel fittings and fixtures including 300 mm long one stainless steel handles fixed in both sides of door shutter, locks fixed with wall /ceiling/floors, floor springs etc complete all as specified and directed.
M&L for PCC 1:4:8 type D2 (using 40 mm graded stone agg) as in sub base, foundation filling in mass concrete etc complete all as specified and directed
M&L for cement concrete type B1, 1:2:4 (20 mm graded stone agg) as in as surface channel, etc for drain and similar works complete all as specified and directed
M&L for stone walling of random rubble, brought upto courses, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and directed.
Taking down old paver blocks any shape, size and thickness from the existing surface and refixing at the same place after levelling the ground by using sand for maintaing camber and slopecomplete all as specified and directed
M&L for Formwork to walls and sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.with rough finished surface complete all as specified and directed
S&F Mild steel TMT bars 6 to 8mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
M&L for Reinforced cement concret (nominal mix) cement concrete 1:11/2:3 type B-1 using 20mm graded stone aggregate as in walls, retaining walls basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses etc. complete all as specified and directed
M&L for preparation of newly plastered surfaces and applying two coats of cement base paint on wall surfaces complete all as specified and directed.
M&L for Mild 1.60 mm steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.
M&L for 300 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.
M&L for 600 mm dia Reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and directed.
S&F in repair PVC(SWR) pipes double socketed in any length with rubber rings joints laid in fixed to walls/laid in trenches including clamps of the 110 mm bore complete all as specified and directed
M&L for 50 mm thick Sand stone slabs in foothpath, sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:3 or cement mortar 1:4, complete all as specified and directed
M&L for precast cement concrete louvres and jallies, 35mm thick (measured solid), using 1:2:4 type B0 including all mouldings but excluding frame complete all as specified and directed
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in deep and getting out in soft/loose soil complete all as specified and directed
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in deep and getting out in hard rock complete all as specified and directed
Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in soft / loose soil complete all as specified and directed
Removing excavated material from site n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, initered/stopped ends complete all as specified and directed
Add or deduct for each 25mm girth or part thereof over or under 30cm for forming fair finished drain complete all as specified and directed
S&F in repair Pre-painted galvalume aluminum zinc coating GI based plain steel sheet, 0.5mm thickness, of colour as approved by GE, having tensile strength of 550 Mpa as in roof coverings/cladding to wall, etc, fixed with & including self tapping screws on angle frame complete all as specified and directed.
Dismantling of asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings, including ridge complete all as specified and directed.
S&F in repairs prelaminated particle board 19 mm thick, exterior grade, prelaminated both side with decorative choice lamination fixed with nails to aluminium framed work complete all as specified and directed.
Deduct Schedule of credit (calculation will be done off line) Rs. 80478.25
M/S RAKESH TRADERS
Jyoti enterprises
CREATIVE CONSTRUCTION
M/s AKG Engineers & Contractors
Nakoda Constrcution Company
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .