GE(W)/HSR-41/2021-22 CERTAIN ESSENTIAL REPAIR/MAINTENANCE REPLACEMENT OF CI/GI PIPE LINES AND CONNECTED WORK AT HISAR MIL STN UNDER GE (WEST) HISAR

Amount

M&L for construction of brick masonry valve pit of size 1050 mm X 1050 mm X 1050 mm (internal dimensions of chamber) depth to be reckoned from the top of PCC in foundation to top of MS cover with MS sheet cover 3mm thick including frame of angle iron 40 X 40 X 6 mm with locking arrangement and lifting handle including painting two coats of black synthetic enamel paint over a coat of red oxide primer etc including brick work in one brick thick wall in cement mortar 1:4, 15mm thick plastering in cement mortar 1:4 (internally on all brick wall and external upto 15cm below ground level) and necessary excavation and earth work in any type of soil, returning, filling in, disposal of surplus spoil to a distance not exceeding 50 mtr 15 cm thick PCC 1:4:8 type D-2 in PCC foundation projected by 15cm all round from the outer face of brick wall PCC 1:2:4 type B-1 in coping complete all as specified and directed.

M&L for construction of brick masonry valve pit of size 1200 mm X 1200 mm X 1200 mm (internal dimensions of chamber) depth to be reckoned from the top of PCC in foundation to top of MS cover with MS sheet cover 3mm thick including frame of angle iron 40 X 40 X 6 mm with locking arrangement and lifting handle including painting two coats of black synthetic enamel paint over a coat of red oxide primer etc including brick work in one brick thick wall in cement mortar 1:4, 15mm thick plastering in cement mortar 1:4 (internally on all brick wall and external upto 15cm below ground level) and necessary excavation and earth work in any type of soil, returning, filling in, disposal of surplus spoil to a distance not exceeding 50 mtr 15 cm thick PCC 1:4:8 type D-2 in PCC foundation projected by 15cm all round from the outer face of brick wall PCC 1:2:4 type B-1 in coping complete all as specified and directed.

M&L for construction of brick masonry valve pit of size 900 mm X 900 mm X 900 mm (internal dimensions of chamber) depth to be reckoned from the top of PCC in foundation to top of MS cover with MS sheet cover 3mm thick including frame of angle iron 40 X 40 X 6 mm with locking arrangement and lifting handle including painting two coats of black synthetic enamel paint over a coat of red oxide primer etc including brick work in one brick thick wall in cement mortar 1:4, 15mm thick plastering in cement mortar 1:4 (internally on all brick wall and external upto 15cm below ground level) and necessary excavation and earth work in any type of soil, returning, filling in, disposal of surplus spoil to a distance not exceeding 50 mtr 15 cm thick PCC 1:4:8 type D-2 in PCC foundation projected by 15cm all round from the outer face of brick wall PCC 1:2:4 type B-1 in coping complete all as specified and directed.

M&L for run lead joint for 80 mm bore cast iron pipe and fittings including material like lead, spun yarn, caulking etc complete all as specified.in new pipes / in leaking joints including dewatering the trenches/ pits where ever required complete all as specified and directed.

All as per item No. 4 but size of CI pipe & fittings 100 mm bore.

All as per item No. 4 but size of CI pipe & fittings 150 mm bore.

All as per item No. 4 but size of CI pipe & fittings 200 mm bore.

All as per item No. 4 but size of CI pipe & fittings 250 mm bore.

All as per item No. 4 but size of CI pipe & fittings 300 mm bore.

All as per item No. 4 but size of CI pipe & fittings 500 mm bore.

Taking up from trench old cast iron pipe 80 mm bore of any class & length (including all fittings) including disconnecting pipes & fittings including burning out joints and recovering lead for reuse in CI pipe by using new spun yarn and extra lead for jointing material and stacking for measurement including cleaning for refixing or removal from site complete all as specified (excavation and earth work shall be measured and paid for separately) complete all as specified and directed.

All as per item No. 11 but CI pipe of size 100 mm bore complete all as specified and directed.

All as per item No. 11 but CI pipe of size 150 mm bore complete all as specified and directed.

All as per item No. 11 but CI pipe of size 200 mm bore complete all as specified and directed.

All as per item No. 11 but CI pipe of size 250 mm bore complete all as specified and directed.

All as per item No. 11 but CI pipe of size 300 mm bore complete all as specified and directed

All as per item No. 11 but CI pipe of size 500 mm bore complete all as specified and directed

M&L Laying, jointing and testing cast iron pipe 80 mm bore with spigot & socket ends (ISI Marked) centrifugally cast of class LA and in any length, laid in trenches complete all as specified and as directed (Note : Excavation and earth work, cast iron fittings or special for spigot and socketed shall be measured and paid for separately) complete all as specified and directed.

All as per item No. 18 but CI pipe of size 100 mm bore complete all as specified and directed.

All as per item No. 18 but CI pipe of size 150 mm bore complete all as specified and directed.

All as per item No. 18 but CI pipe of size 200 mm bore complete all as specified and directed.

All as per item No. 18 but CI pipe of size 250 mm bore complete all as specified and directed.

All as per item No. 18 but CI pipe of size 300 mm bore complete all as specified and directed.

M &L Laying, jointing and testing cast iron pipe 80 mm bore with spigot & socket ends (ISI Marked) centrifugally cast of class A and in any length, laid in trenches complete all as specified and as directed (Note : Excavation and earth work, cast iron fittings or special for spigot and socketed shall be measured and paid for separately) complete all as specified and directed.

All as per item No. 24 but CI pipe of size 100 mm bore complete all as specified and directed

All as per item No. 24 but CI pipe of size 150 mm bore complete all as specified and directed

All as per item No. 24 but CI pipe of size 200 mm bore complete all as specified and directed

All as per item No. 24 but CI pipe of size 250 mm bore complete all as specified and directed

All as per item No. 24 but CI pipe of size 300 mm bore.

All as per item No. 24 but CI pipe of size 500 mm bore.

M&L for cutting cast iron 80 mm bore pipes for insertion of new tees, branch and reducing to required length complete all as specified and directed. (Note: Both sides cut shall be measured as one unit)

All as per item No. 31 but size of CI pipes 100 mm bore complete all as specified and directed

All as per item No. 31 but size of CI pipes 150 mm bore complete all as specified and directed

All as per item No. 31 but size of CI pipes 200 mm bore complete all as specified and directed

All as per item No. 31 but size of CI pipes 250 mm bore complete all as specified and directed

All as per item No. 31 but size of CI pipes 300 mm bore complete all as specified and directed

All as per item No. 31 but size of CI pipes 500 mm bore complete all as specified and directed

Burning out lead joints of CI pipe and fittig 80 mm bore in position including removing old lead to complete and refilling old lead to existing erthing pipe line, joints. Note : Addition lead, yarn, white/red lead if required shall be measured and paid separately under separate item as supply only complete all as specified and directed.

All as per item No. 38 but size of CI pipe & fittings 100 mm bore complete all as specified and directed

All as per item No. 38 but size of CI pipe & fittings 150 mm bore complete all as specified and directed

All as per item No. 38 but size of CI pipe & fittings 200 mm bore complete all as specified and directed

All as per item No. 38 but size of CI pipe & fittings 250 mm bore complete all as specified and directed

All as per item No. 38 but size of CI pipe & fittings 300 mm bore complete all as specified and directed

All as per item No. 38 but size of CI pipe & fittings 500 mm bore complete all as specified and directed

M&L for cast iron fittings or specials for flanged / spigot socketed end pipe upto 150 mm bore conforming to IS-1538 and ISI marked such as bends , tapers, tee pieces (single & double branch) any type, and angle/radios amd Straight connecting pieces but all ends flanged complete Note :(joints, excavation and earth work shall be measured and paid separately) complete all as specified and directed.

M&L for cast iron fittings or specials for flanged / spigot socketed end pipe upto 200 to 300 mm bore conforming to IS-1538 and ISI marked such as bends , tapers, tee pieces (single & double branch) any type, and angle/radios amd Straight connecting pieces but all ends flanged complete Note :(joints, excavation and earth work shall be measured and paid separately) complete all as specified and directed.

M&L for cast iron fittings or specials for flanged / spigot socketed end pipe upto 400 to 500 mm bore conforming to IS-1538 and ISI marked such as bends , tapers, tee pieces (single & double branch) any type, and angle/radios amd Straight connecting pieces but all ends flanged complete Note :(joints, excavation and earth work shall be measured and paid separately) complete all as specified and directed.

M&L for cast iron fittings or specials for flanged / spigot socketed end pipe upto 150 mmbore conforming to IS-1538 and ISI marked such as connecting pieces and end flanged and other socket or spigot and bell muth pieces one end flanged other end tapering as bell mouth (joints, excavation and earth work shall be measured and paid separately) complete all as specified and directed.

M&L for cast iron fittings or specials for flanged / spigot socketed end pipe from 200 mm to 300 mm bore conforming to IS-1538 and ISI marked such as connecting pieces and end flanged and other socket or spigot and bell muth pieces one end flanged other end tapering as bell mouth (joints, excavation and earth work shall be measured and paid separately) complete all as specified and directed.

M&L for cast iron fittings or specials for flanged / spigot socketed end pipe from 400 mm to 500 mm bore conforming to IS-1538 and ISI marked such as connecting pieces and end flanged and other socket or spigot and bell muth pieces one end flanged other end tapering as bell mouth (joints, excavation and earth work shall be measured and paid separately) complete all as specified and directed.

Disconnecting and taking down from 80 mm bore existing unserviceable sluice valves, refacing, refgrinding and refixing, including flanged joints fittings and removing from site complete all as specifed and directed. Note (if new sluice valves required shall be measured and paid separetely complete all as specified and directed.

All as per item No. 51 but size of sluice valve 100 mm bore complete all as specified and directed

All as per item No. 51 but size of sluice valve 150 mm bore complete all as specified and directed

All as per item No. 51 but size of sluice valve 200 mm bore complete all as specified and directed

All as per item No. 51 but size of sluice valve 250 mm bore complete all as specified and directed

All as per item No. 51 but size of sluice valve 300 mm bore complete all as specified and directed.

All as per item No. 51 but size of sluice valve 500 mm bore complete all as specified and directed

Supply, fixing ,connecting and testing sluice valves of size 80 mm bore class PN1.6 cast iron body with rising brass spindle, Non rising type and cast iron wheel head both end flanged IS-14846 Body, Cover - CI IS-210, Gr, FG260, Body ring - Bronze IS:318 Gr, LTB2 Door face-Natural rubber , Hinge Pin - SS ASTM A 276 Type 410 Fasteners-CS IS:1367, CL-4.0 Gasket-Natural rubber flange drilling-IS:1538 marked complete with nut & bolts washer etc complete all as specified and directed.

All as per item No. 58 but size of sluice valve 100 mm bore complete all as specified and directed

All as per item No. 58 but size of sluice valve 150 mm bore complete all as specified and directed

All as per item No. 58 but size of sluice valve 200 mm bore complete all as specified and directed

All as per item No. 58 but size of sluice valve 250 mm bore complete all as specified and directed

All as per item No. 58 but size of sluice valve 300 mm bore complete all as specified and directed

All as per item No. 58 but size of sluice valve 500 mm bore complete all as specified and directed

S&F replacement of check nut & Spindle of sluice valve of size 80 mm bore as existing pattern all as specified and directed.

All as per item No. 65 but size of check nut 100 mm bore complete all as specified and directed

All as per item No. 65 but size of check nut 150 mm bore complete all as specified and directed

All as per item No. 65 but size of check nut 200 mm bore complete all as specified and directed

All as per item No. 65 but size of check nut 250 mm bore complete all as specified and directed

All as per item No. 65 but size of check nut 300 mm bore complete all as specified and directed

All as per item No. 65 but size of check nut 500 mm bore complete all as specified and directed

Supply only pig lead complete all as specified and directed complete all as specified and directed

Supply only lead wool complete all as specified and directed complete all as specified and directed

Supply only Red or white lead cement complete all as specified and directed.

Supply only spun yarn complete all as specified and directed.

Excavating trenches.in soft/loose soil exc. 1.5 mtr wide and not exceeding 1.5 mtr in depth for taking up/down underground water tubing and/or laying of CI/GI pipes (new or old) of any dia and getting out complete all as specified and as directed.

Excavation in trenches in in hard & dense soil (in Road cutting / plinth ) l n. exc. 1.5 mtr deep and not exceeding 1.5 mtr in width for taking up/down underground water tubing and/or laying of CI/GI pipes (new or old) of any dia and getting out complete all as specified and as directed.

Removal of surplus soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr from starting point complete all as specified and as directed.

Returning filling in including spreading, levelling watering and well ramming in layers not exceeding 25 cm thick in any type of soil after the existing water pipe lines have been taken up/out and new existing pipe line laid and tested complete all as specified and directed.

M & L for 80 mm bore/dia Ductile iron pipes spigot & socket end, centrifugally cast (spun) class K-9 conforming to IS-8329/2000 with all fittings as required at site including cutting for existing pipe for insertion of Tee for branches, screwing etc in any length laid in trenches cross under road / walls/ hard standing/ under floor of bldg with & including EPDM rubber gasket complete all as specified and directed.

All as per item No. 80 but CI pipe of size 100 mm bore complete all as specified and directed

All as per item No. 80 but CI pipe of size 150 mm bore complete all as specified and directed

M&L for Detachble joints of C/DII pipe and fittig 80 mm bore in position including removing old lead to existing pipe line, joints complete all as specified and directed. Note :- Earth work shall be measured and paid separately.

All as per item No. 83 but CI pipe of size 100 mm bore complete all as specified and directed

All as per item No. 83 but CI pipe of size 150 mm bore complete all as specified and directed

All as per item No. 83 but CI pipe of size 200 mm bore complete all as specified and directed

All as per item No. 83 but CI pipe of size 250 mm bore complete all as specified and directed

All as per item No. 83 but CI pipe of size 300 mm bore complete all as specified and directed

All as per item No. 83 but CI pipe of size 500 mm bore complete all as specified and directed

Taking up or down old U/S GI 15 mm bore and connections from trench/floor/along wall including all GI fittings deposit at MES store at water supply from site (excavation and earth work shall be measured and paid for separately) complete all as specified and directed.

All as per item No. 90 but GI bore of size 20 mm bore complete all as specified and directed

All as per item No. 90 but GI bore of size 25 mm bore complete all as specified and directed

All as per item No. 90 but GI bore of size 40 mm bore complete all as specified and directed

All as per item No. 90 but GI bore of size 50 mm bore complete all as specified and directed

All as per item No. 90 but GI bore of size 80 mm bore complete all as specified and directed

All as per item No. 90 but GI bore of size 100 mm bore complete all as specified and directed

Laying only, jointing and testing galvanized iron tubes 15 mm bore with all new fittings, laid in trenches completed all as specified and directed. (excavationand earth work shall be measured and paid fpr separately) (Note : Old GI tubing obtained from taking down shall be used in this item) Note : (a) Excavationand earth work shall be measured and paid fpr separately (b) GI tube only issued from store of water supply. (c) Transportation and all GI fiitngs suitable for GI pipes proviision by contractor only.

All as per item No. 97 but size of tubing 20 mm bore complete all as specified and directed

All as per item No. 97 but size of tubing 25 mm bore complete all as specified and directed

All as per item No. 97 but size of tubing 40 mm bore complete all as specified and directed

All as per item No. 97 but size of tubing 50 mm bore complete all as specified and directed

All as per item No. 97 but size of tubing 80 mm bore complete all as specified and directed

All as per item No. 97 but size of tubing 100 mm bore complete all as specified and directed

M&L for replacement of gun metal gate valve ISI Marked with iron wheel 15 mm bore complete with necessary fittings as required at site complete all as specified and as directed.

All as per item No. 104 but size of gun metal gate valve 20 mm bore complete all as specified and directed

All as per item No. 104 but size of gun metal gate valve 25 mm bore complete all as specified and directed

All as per item No. 104 but size of gun metal gate valve 40 mm bore complete all as specified and directed

All as per item No. 104 but size of gun metal gate valve 50 mm bore complete all as specified and directed

Taking up from trench old CI/DI pipe 80 mm bore of any class & length including all fittings and stacking for measurement including cleaning for refixing or removal from site complete all as specified (excavation and earth work shall be measured and paid for separately) complete all as specified and directed.

All as per item No. 109 but CI/DI pipe of size 100 mm bore complete all as specified and directed

All as per item No. 109 but CI/DI pipe of size 150 mm bore complete all as specified and directed

Taking out unsv mild steel covers of valve chambers and supply and fixing covers suitable for existing valve chambers duly hinged fabricating the frame by using 3.15mm thick mild steel sheet and angle iron of size 40 mm X 40 mm X 6 mm thick including making locking arrangement and fixing the above cover in PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate and providing hold fast of appropriate size made to shape of 50mm x 6mm mild steel flat including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Demolition of brick work built in cement mortar including all arches, pillars etc and removal of brick bats from site and rubbish to a distance n.exc 100 mtr complete all as specified and directed.

Demolition of cement concrete (un reinforced) as in foundation not exc 15cm thick(below or above ground level) of old foundation of valve chambers and coping etc and removal of rubbish to a distance n.exc 100mtre complete all as specified and directed.

M&L plain cement concrete 1:3:6 type C-2 using 40mm graded mechanically crushed stone aggregate as in foundation including necessary form work all as specified and directed.

M&L plain cement concrete 1:2:4 type B-1 using 20mm graded mechanically crushed stone aggregate as in coping including necessary form work & finishing the surface even and smooth without using extra cement complete all as specified and directed .

M&L brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius using old size bricks in cement mortar 1:4 for supports to pipes and repair to valve chambers complete all as specified and directed.

M&L plastering 10mm thick in cement mortar 1:4 on brick or concrete walls of any description, surfaces finishing surfaces even and smooth without using extra cement complete all as specified and directed.

M&L plain cement concrete 1:2:4 type B-2 using 40mm graded mechanically crushed stone aggregate 100mm thick as in road cutting including necessary form work & finishing the surface even and smooth without using extra cement complete all as specified and directed .

VIKAS INFRASTRUCTURE

M/S Poonia Brothers Construction Company

M/s Devendera construction

S K BUILDERS

PRINCE CONSTRUCTION

virendra constructions

SITA RAM AND SONS