REPAIRS TO TOILETS AND KITCHENS OF GANDHI NAGAR TYPE -II AND TYPE -B QUARTER (52 QUARTERS) IN EAST LAND AREA AT O.F. KATNI

Amount

Dismantling ,floor ,hearth or wall tiling including CM bedding (but not backing),removing serviceable tiles to store & rubbish off the premises complete all as directed

M&L coloured Glazed ceramic tiles in vertical surface300x200mmx7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat in CM 1:4 , 10 mm thick plaster for receiving tiles all as specified and directed.

M&L for coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick scred bed in CM 1:6 for laying floor finishes all as specified and directed.

S&F in repairs Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern & flush pipe) all as specified and directed.

S&F in repair PVC low level 10 litre capacity valveless syphonic action type white flushing cistern with inlet ball valve float and handle including brackets and necessary fittings etc fixed in repairs complete all as specified and directed.

S&F CP 20mm dia tubular towel rail 600mm long complete all as specified and directed.

Taking Up or down steel tubing 15mm dia bore and conection, including cleaning for refixing or removal to store.

Taking Up or down steel tubing 20mm dia bore and conection, including cleaning for refixing or removal to sore

Refixing old steel tubing 15mm dia bore pipe and conection in new or old position(wall,ceiling,floors,etc

Refixing old steel tubing 20 mm dia bore pipe and conection in new or old position(wall,ceiling,floors,etc

S&F Galvanised tubes medium grade 15 mm dia bore pipe with all fittings and fixed complete to walls and ceiling or laid in floors all as complete

S&F Galvanised tubes medium grade 20 mm dia bore pipe with all fittings and fixed complete to walls and ceiling or laid in floors all as complete

S&F PVC connection 15mm bore size with PTMT nuts of length 450mm long.

S&F 40mm dia PVC waste pipe low density (LDPE) of pressure 6kg/CM2 complete with fittings all as specified and directed.

S&F in repairs brass chormium platee shower rose 125mm size including fixing to steel tube

S&F 75 mm out let cast Iron floor trap with chromium plated grating including Jointing to waste pipe and fixed in cement concrete B1 (1:2:4 ) using 20 mm graded stone aggregate all as spcefied and directed

Demolition and breaking up or down PVC /AC Cement rain pipe fixed in any position all as specified and directed

S&F 110mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall complete all as specified

S&F 75mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall complete all as specified

S&F PVC (SWR) bends 110 mm dia provided with access door all as specified and directed

S&F PVC (SWR) bends 110 mm dia all as specified and directed

S&F PVC (SWR) bends 75 mm dia all as specified and directed

S&F PVC (SWR) bends 75 mm dia provided with access door all as specified and directed

S&F PVC (SWR) vent cowl 110 mm dia provided with all as specified and directed

S&F PVC (SWR) pipes single socket 75 mm dia in any length with rubber ring joint laid in trenches or in floor all as specified and directed

Demolition brick work or stone / boulder masonry built in cement mortar including removal of debris to a distance not exceeding 100m as directed by Engr-in-Charge.

M&L for brick work with sub class 'B' brick straight or curved on plan exc 6m mean radius as in wall etc in CM 1:6 complete all as specified and directed by Engr in Chanrge

M&L for half brick work with sub class 'B' brick modular size in CM (1:4)straight or curved on plan exc 6m mean radius as in wall etc complete all as specified and directed by Engr in Charge

M&L for Rendering 15mm thickin CM 1:6 on fair faces of brick work or concrete surfaces even and smooth witout using extra cement

M&L for Rendering 15mm thickin CM 1:4 on other than fair faces of brick work or concrete surfaces even and smooth witout using extra cement

Applying two coat of oil bound distemper on new surface of wall including preparation over acoat of whitewash complete all as specified and directed

All as per item No. 31 here in above but one coat on old surface of wall complete all as directed

M&L applying one coat of white wash on ceiling

Demolition of PCC of any description & in any position not otherwise specifcally provided for (unreinforced) including removal of debris to a distance not exceeding 100m as directed by Engr-in-Charge.

M&L APP modified polymeric membrane with mineral finish on top min 3mm th & weighing n. less than 3.6kgs/sqm with mineral reinforced with polyster non-woven fabric(wt n.less than 150gm/m2) laid over cold biuminous primer by torch application method with min overlap of 75mm on longitudinal direction & 100m in the transverse direction over a coat of bitumen grade 85/25 Gde of 1.20 Kg/Sqm including complete removal of old APP membrane all as specified and directed

M&L for rendering 10mm thick over roof in CM(1:4) surfacefingished fair and even without using extra cement incl using of WPC of approved make complete all as specified and directed (WPC shall be measured separately).

Supply only Integrated water proofing compound

M&L PCC type E-2 (1:5:10) using 40mm graded stone agg) as in filling and mass concrete all as specified and directed.

M&L 18/20mm thick Granite (of any type) work (table rubbed and polished in steps, jambs, pllarsmwindow cill, cooking plate forms and like in cement mortar (1:4) including pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed.

M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar work all as specified and directed

S&F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plug washers and waste pipe including fixing contilever bracket and connecting union to pipe over all size 915 mmx 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repair 15mm bore bib tap cast copper alloy with crutch or butterfly handle ,screwed down ,screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F 15mm bore bib tap cast copper alloy with crutch or butterfly handle ,screwed down ,screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fixed in repair stop valves, 15mm dia, cast copper alloy,type with long shank and cup(concealed type) screwd down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided all as directed

M&L RCC type B1 1:2:4 (20mm graged aggregate) as slab support on wall,beams including form work as required complete all as specified and directed including removal of debris to a distance not exceeding 100m as directed by Engr-in-Charge.

M&L Pre-cast PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in manhole cover slab set in CM 1:4 complete all as specified.

M & L for TMT bars, 10mm dia and over cut to length and bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified.

Taking Down chowkats or frames with shutters (without taking off shutters from frames) n.exc 1.5 sqm each

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F Aluminium anodised barrel tower bolts 200mm long of extruded section

S&F Aluminium hinges 100mm size buty type C-24

S&F Aluminium handle 150mm size cast tpe anodised

M&L Salt glazed stone ware gully traps, square or round mouth type 'P' of size 150x100 complete all as specified

Cutting of small trees/plantsat the stem removal of the roots of the plants by using acids, cutting around the sport for removing the roots of any size and making good with CM 1:3 incl two coats of cement base paint complete all as directed by Engineer-in-Charge

Cutting holes around the bends, tees, junctions any descriptions in the walls built in CM inspecting the joint leakage and rectifying the leakage/seepage and making good the cut portion with CM 1:3 or PCC 1:2:4 incl finishing the portion with two coats of cement based paint complete all as directed by Engr-in-Charge.

Dismantling of water tanks of capacity exc 250 & n.exc 500 ltrs and removing to stores.

Cleaning and removing exc 250 & n.exc 500 litres capacity all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 500 Ltrs Capacity including 20mm PTMT float valve complete all as specified and directed

Taking down carefully existing Un-Serviceable aluminium batten/surface conduit/concealed conduit point wiring (light/Fan/socket/call bell/ Power point) complete (fittings and fixtures such as switches, ceiling roses, shades, brackets, sockets, holders and light fittings removing the Un-Serviceable retrieved materials from site making good the disturbed surfaces of walls/floors/ ceilings etc. complete all as directed by Engineer-in-Charge.

M&L for point wiring with 1.5 Sq mm, PVC insulated, FRLS, single core, copper conductor cable, 1100 Volt grade, multi stranded in and including concealed PVC Conduit pipe of size not less than 19 mm dia with all accessories for one light/socket outlet 5 Amps independent point controlled by one switch with and including continuous 1.5 Sqmm PVC insulated single core copper conductor cable earth continuity conductor connected to common earth and earth dolly, sunk pressed steel terminal boxes and laminated sheet cover for mounting switches, sockets, fan regulators etc. all as directed. Note : Cost for cutting chase and concealng the conduit in wall is deemed to be included in the item rate quoted. Conduit and accessories will not be concealed on roof.

All as per item No. 62 here in before but with 4 Sq mm cable for one socket outlet 15 Amps independent including continuous 2.5 Sqmm PVC insulated single core copper conductor cable earth continuity conductor connected to common earth and earth dolly.

Supply and Fixing Switch flush type, 5 Amps, single pole, one way.

Supply and Fixing Switch Socket combination, 2 in 1, 3 pin 5 & 15 Amps (6 pin) flush type universal.

Supply and Fixing Switch Socket combination, 3/2 pin 5 Amps flush type.

Supply and Fixing Ceiling Rose Surface PVC type 65 x 50 mm three terminals.

Supply and Fixing Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings.

Supply & Fixing LED tube lamp fitting 1 x10 watts, Box type, 2 ft, surface mounted, PC housing, LED integrated batten, complete with all accessories mounting on wall/ceiling or any other indicated position all as directed by Engineer in charge. Make: Philips Cat No. BN021LED10S-6500 PSU GR S1 or Equiv of Bajaj/Crompton/Wipro/Havells

Supply & Fixing LED tube lamp fitting 1 x 20 watts, Box type, 4 ft, surface mounted, PC housing, LED integrated batten, complete with all accessories mounting on wall/ceiling or any other indicated position all as directed by Engineer in charge. Make: Philips Cat No. BN021LED20S-PSU CW GR S2 or Equiv of Bajaj/Crompton/Wipro/Havells

Supply and Fixing Retrofit LED, lamp, 230 Volt, 9 watts, BC type suitable for fixing on batten holder.

R R VISHWAKARMA CONSTRUCTION CO