Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.3 LAccepted-AOC | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹38.4 L+₹64,158 (1.70%)Rejected-Finance | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹39.0 L+₹1.3 L (3.46%)Rejected-Finance NO 17 5 SOLOMON STREET ADHI NAGAR EAST TAMBARAM CHENNAI 600 059 | CHENNAI | TAMIL NADU | 600001 | L3 | Rejected-Finance Not being L1 | |
| 4 | L4₹40.1 L+₹2.4 L (6.24%)Rejected-Finance | L4 | Rejected-Finance Not being L1 | |
| 5 | L5₹40.7 L+₹3.0 L (7.95%)Rejected-Finance 30 DIGVIJAY PLOT RAVAL NIVAS JAMNAGAR GUJARAT 361 005 | JAMNAGAR | JAMNAGAR | GUJARAT | 361005 | L5 | Rejected-Finance Not being L1 |
Tender Value
₹43 L
EMD Value
₹86,000
Closing Date
27 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer
GARRISON ENGINEER (AF) AIR FORCE STATION TAMBARAM, CHENNAI - 600 046
REPLACEMENT OF ASBESTOS ROOF OF CERTAIN OTM ACCN AT AF STATION TAMBARAM
2022_MES_527424_1
GE(AF)/TBM/8559/E8
Open Tender
Civil Works
Item Rate
240 days
Airforce Station Tambaram
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE AF TAMBARAM
₹86,000
Yes
2 Aug 2022
30 May 2022
29 Jun 2022
31 May 2022
27 Jun 2022
14 Jun 2022
31 May 2022 - 6 Jun 2022
60 days
Amount
Taking down old cement plaster including racking out joint hacking for keys and scrubbing down with water etc., on wall surfaces all as specified and directed.
M&L Rendering 10mm thick on fair faces of brick work or concrete internal surfaces in CM 1:6 finishing even and smooth without using extra cement complete all as specified and as directed
M&L Rendering 15mm thick on fair faces of brick work or concrete external surfaces in CM 1:6 complete all as specified and as directed
M&L Preparation of new plastered surfaces of walls and applying three coats of white wash on walls complete all as specified and as directed
M&L Preparation of new plastered wall surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and as directed
Demolition of reinforced cement concrete in above ground floors and pavings not exc 15 cm thickness complete all as specified and as directed.
M&L Plain cement concrete type B-1, 1:2:4 using 20mm graded stone aggregates as in floor finishes, 40mm thickness complete all as specified and as directed
M&L Screed bed or bedding layer of cement mortar 15 mm thick in CM 1:6 for laying floor finishes etc complete all as specified and as directed
M&L Joint free Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed
M&L Rendering 10mm thick in cement mortar 1:4 as in backing coat of skirting/dado etc complete all as specified and as direccted
M&L Joint free Glazed coloured ceramic tiles in vertical surface area of each tiles exc 0.06 but not exc 0.18 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed
Taking down chowkats/Frames of area not exc 1.5 Sqm with shutter (without taking off shutters from the frame) each all as specified and as directed.
All as per item No 12 above but area exc 1.5 Sqm & not exc 4 Sqm
Taking down shutters of any description of area not exc 1Sqm each
S&F 2nd class Hard wood plain, solid, straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joint etc complete all as specified and as directed
S&F 2nd class hard wood plain framed panelled shutter 30mm thick (any number of panel) with panels of timber flat on both sides (feather edged) or of12mm thick commercial face veneers of ply wood commercial type all as specified and as directed
S&F 2nd class Hard wood Glazed and skeleton shutters of 25mm thick as in windows , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats as direced.
S&F 4mm thick plain ordinary glass fixed in squares not exc 0.5 Sqm in each panes with wooden beading or oil putty all as specified and as directed
S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and directed
S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face fiixing in frame at site as per specification & drawing complete all as specified and directed
S&F Aluminium anodised,200mm long barrel tower bolts of extruded section and fixed complete all as specified and as directed
S&F Extruded aluminium alloy handles,150mm long fabricated type, anodised complete all as specified and as directed
S&F Butt hinges 100mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed
S&F Aluminium alloy, anodised sliding door bolt, with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolt of extruded section or cast alluminium alloy of size 250 mm all as specified and as directed
S&F Extruded Aluminium alloy handle fabricated type, anodised of size 150mm all as specified and as directed
S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm all as specified and as directed
M&L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed
M&L for preparing old wooden surfaces of any description over 10cm width or girth and applying one coats of synthetic enamel paint all as specified and as directed.
Cutting holes in to brick wall built in cement mortar exc half brick & not exc full brick and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required all as specified and as directed
M&L for small articles such as hold fasts etc. of Flat Iron 25 x 3, Grade confirming to Fe-290 Gde E-165 all as specified and as directed
M&L for preparing small articles such as hold fasts, end of posts etc. of area not exc 0.1Sqm and treated with Cresote Oil/ black bituminous paint etc all as specified and as directed
M&L preparing of wood and wood based materials, steel, and iron work, new or old and treating ends of posts, backs of chowkats, etc, area tarred exc 0.1 sq m but not exc 0.5 sq m each and treated with tar or coat tar black paint
S&F Aluminium alloy, anodised,sliding door bolt of 250mm long with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed
S&F in Vitreous china squatting pan orissa pattern size 500x440mm white with integral foot rest (excluding flushing cistern and flush pipe ) and making good to floor all as specified and as directed
S&F PVC valveless, syphonic action type of 10 liter capacity, flushing cistern,low level, white, with inlet, ball valve, float and handle including brackets and PVC connections of 15mm size with PTMT nuts of length 600 mm etc., complete all as specified and as directed
S&F in repairs Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement,flush pipe 600mm long, grating and Union for discharge pipe etc complete all as specified and as directed
S &F in repairs vitreous china counter type wash basins angle back,size 600x480mm including cutting for and pinning in ends of brackets or errecting stand white 32mm dia polyethylene fush pipe, PVC connections 15mm size with PTMT nuts of length 600 mm, waste pipe screwd for pipe or connections including necessary packing, union and cap and fixed etc including brackets compete all as specified and as directed
S&F in Bib taps 15mm bore, cast copper alloy with crutch handle,fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed
S&F in Pillar taps 15mm bore, cast copper alloy, with capstan heads,chromium plated,fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed
S&F in Stop valves 15mm bore, cast copper alloy,fancy type, chromium plated screwed down, high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed
S&F Tubular towel rail, aluminium anodised, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed
S&F Soap dish, vitreous China white, approximate size 160x 160x90mm fixed to plugs with chromium plated brass screws complete all as specified and as directed
Supplying and laying of 16mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and directed.
S&F GI tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors 25mm bore all as specified and as directed.
Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth for foundation not exc 1.5 m in depth and getting out hard/dense soil
M&L 150mm dia salt glazed stoneware drain pipes laid in trenches and joints as specified complete all as specified and as directed
M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested;in cement concrete 1:3:6, Type C2 using 40mm graded stone aggregate for 75mm and 150mm dia pipes complete all as specified and as directed
S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floors and walls complete all as specified and as directed
All as per item No 52 above but 110 mm bore
S&F 75mm dia PVC (SWR) bend without access door
S&F 110mm dia PVC (SWR) bend without access door
S&F in repairs 75mm dia PVC (SWR) floor trap with grating incl jointing with solvent cement
S&F in repairs PVC (SWR) multi floor trap 75mm with grating including jointing with solvent cement complete all as specified and as directed
M&L Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching for 150mm dia as required all as specified and as directed
S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed
S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and as directed
S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and as directed
M&L Returning, filling in hard dense soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed
M&L Removing excavated material of hard dense soil not exc. 50m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed
M&L Plain cement concrete, 75mm thickness, type C2, 1:3:6 (using 40mm graded stone aggregate) as in plinth protection including necessary formwork finishing even and smooth with using extra cement complete all as specified and as directed
M&L Providing precast reinforced cement concrete precast slab as in drain cover and counter for wash basin, type B1, 1:2:4 using 20mm graded stone aggregate, set in CM 1:4 including necessary formwork required complete all as specified and as directed
Dismantling AC corrugated or semicorrugated sheets in roof covering / wall cladding all as specified and as directed
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as per the manufactures instruction and as directed.
S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.
S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 all as specified and as directed
S&F for Mild Steel flat as in wind tie complete all as specified and directed.
M&L for preparing new Steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed
M&L for preparing old Steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed
Complete removal of existing surfaces of wall and applying two coats of apex ultima exterior emulsion over a coat of exterior primer omplete all as specified and directed.
S&F in repair for powder coated galvanized snap grid frame work of size 605X605mm for false ceiling all as specified including vinyl laminated MPL gypsum panels (gyptec) 9mm of size 600X600mm fixing with staples on snap grid by means of GI wire not less than 4mm dia hooks and rawl plugs etc C/C of Make: Gyptec/ Armstrong or equivalent from list of makes complete all as specified and directed.
M&L preparation of old decorated surfaces of walls pilasters including cornices and applying two coat of white wash evenly complete all as specified and as directed.
S&F structural steel work as in roof trusses (framed), trussed, purlins, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, conforming to Fe-290 (Gde E-165) all as specified and as directed
Demolition of brick work built in CM including all quoins arches pillars etc all as specified and as directed.
M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed
M&L for Brickwork with fly ash bricks,straight or curved on plan to any radius in half brick thick walls, built in cement morter 1:4 all as specified and as directed.
Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, Rigid PVC FRLS concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes with earth dolly duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets etc, including PVC insulated multi-stranded copper conductor 1.5 Sq mm nominal cross sectional area single core cable as earth continuity conductor to common earth and connecting to earth dolly complee all as specified and directed for (a) One light point controlled by one, one way switch
(b) One Exhaust / Ceiling fan point controlled by one, one way switch
(c) One socket outlet 5 Amps 5 Pin on the same board
(d) One socket outlet 5 Amps 5 Pin on independent board
(e) One light point controlled by one, one way switch (Flame Proof)
(f) One socket outlet 5 Amps 5 Pin on independent board (Flame Proof)
All as per item No 80 above but with 4 sqmm for power point 15 amps.
Supply and fixing of switch piano flush type single pole ,one way 5 Amp all as specified and directed.
Supply and fixing of switch socket combinationt 5 pin 5A flush type all as specified and directed.
Supply and fixing of switch socket combination multipurpose 5/15 amps all as specified and directed.
Supply and fixing of ceiling rose 3 Phase/PVC isolated body all as specified and directed.
Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V all as specified and directed.
Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A,250V, 2P+earth all as specified and directed.
Supply and fixwall mounted LED 20 Watt batten, extruded aluminium heat sink provided for efficient heat dissipation and integrated electonic driver as per cat part No ENDURALINEARNEOBS20WLED865SPCWH of Havells or its equivalent from list of makes as approved.
Supply and fix 2x2 LED 28 Watt , Environmental friendly, new generation,aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, extruded aluminium heat sink provided for efficient heat dissipation and integrated electonic driver as per cat part No PLUTONEO2X2PLR34WLED840S of Havells make or its equivalent from list of makes as approved.
Supply and fix wall mounted LED 10 Watt batten, extruded aluminium heat sink provided for efficient heat dissipation and integrated electonic driver as per cat part No LUMILINEBS10WLED865SPCWH of Havells or its equivalent from list of makes as approved.
Supply and fix heavy duty Exhaust fan 300 mm sweep 900 RPM, Turbo force SP with louver shutter and connecting including making holes for Exhaust Fan and provision of 3 core cable of 0 .5 sqmm from ceiling rose to fan all as directed.
Supply and fixing LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vaporgroup of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver,holders, size.core flexible copper conductor cable with suitable prewired and including connecting up with three connector etc. Complete with all accessories
S&F in replacement single pole and neutral sheet metal enclosure with two pin and earth plug and socket complete with single pole MCB 20/ 25 Amps for incoming and out going control all as specified and as directed.
S&F MCB distribution board, double door, made of 1.2 mm thick special grade CRCA sheet, powder coated with high quality weather proofing paint conforming to IS 13032, fixed in switch boards/wall at various places of capacity 230 volts 8 way SPN MCB DB. DBS shall conform to IS 38 protection all as specified and as directed.
S&F MCB distribution board, double door, made of 1.2 mm thick special grade CRCA sheet, powder coated with high quality weather proofing paint conforming to IS 13032, fixed in switch boards/wall at various places of capacity 440 volts 4 way TPN MCB DB. DBS shall conform to IS 38 protection all as specified and as directed.
S & F MCB SP 06 to 32 Amps, 10KA 240 volts,50Hz.all as specified and as directed.
S & F MCB SPN 32 Amps 10KA 240 volts all as specified and as directed.
S & F MCB TPN 25 to 63 Amps 10KA 'C' Curve415volts all as specified and as directed.
S& F Single pole and neutral enclosure with two pin and earth plug and metal glad socket complete with one single pole MCB 20 Amp 240 Volts all as specified and as directed.
M&L for Circuit/Sub main wiring two run of 6 sqmm single core PVC insulated unsheathed cable single core multistranded copper conductor 1100 volts grade drawn through suitable size of PVC conduit and conduit accessories concealed on floor/wall/ surface on ceiling with suitable clamps/saddles including one run of 6 sqmm PVC insulated copper cable for continuous earth conductor connected to common earth dolly all as specified and as directed. ( Note : 3 runs of 6 sqmm cable and 1 Run of PVC conduit together shall be measured as one unit length)
Excavation in trenches not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide and getting out in hard/dense soil for all as directed.
Returning filling in leveling watering and well ramming in layers not exceeding 25 cm thick all as specified and directed.
Removal of surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and as directed.
M&L for sand filling in trenches above and below the cable as in cable protection. Note :- Punned thickness shall be measured and paid.
Supply and lay common burnt clay sub class 'B' bricks for cable cover all as specified and directed
Supply and Laying LT UG cable 1100 Volts grade25 Sqmm 3.5 core XLPE insulated PVC sheathed amoured, heavy duty, in trenches/walls/poles/passing through pipes with multistranded aluminium conductor including lugs/thimble /ferules connection, testing and commissioning complete all as specified and directed Note: [i] Earth work, excavation , sand cusioning, bricks for protection, GI pipe etc shall be measured separately under relevant items of this schedule
M&L for earthing for pole complete with galvanized steel earth plate electrode 600X600X6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5M below normal ground level connected to GI earth lead wire 4.0 mm dia by means of nuts, bolts, check nuts and washer of GI steel and connecting to testing point including provision of test point and all as shown in electrical plate No. 3. The quoted rate is inclusive of necessary earth work and PCC chamber in type CI (1:2:4) with 8 mm CTD bar reinforcement both ways at 140 mm centre to centre complete all as specified and directed.
Varsa Constructions
kcs builders
PSM ENGINEERS
RAVI ENTERPRISE
Raju Builders
M/s KM Marimuthu Achary
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .