Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹1.4 CrAccepted-Finance CHANDIGARH | CHANDIGARH | CHANDIGARH | 160001 | ₹1.4 Cr | L-1 | Accepted-Finance L-1 |
| 2 | L-2₹1.4 Cr+₹3.5 L (2.59%)Rejected-Finance 2313 3 SECTOR 45 C CHANDIGARH | ₹1.4 Cr+₹3.5 L (2.59%) | L-2 | Rejected-Finance Not L-1 |
| 3 | L-3₹1.4 Cr+₹4.6 L (3.37%)Rejected-Finance 1192 SECTOR 79 MOHALI | ₹1.4 Cr+₹4.6 L (3.37%) | L-3 | Rejected-Finance Not L-1 |
Tender Value
₹1.4 Cr
EMD Value
₹2.8 L
Closing Date
12 Aug 2026, 3:00 pmClosed
Executive Engineer Hort. Divn No.1, M.C., Chd.
Executive Engineer Hort. Divn No.1, M.C., Chd.
DESIGN PROPOSAL LEISURE VALLEY, SECTOR 10, CHANDIGARH LANDSCAPING, CIVIL WORK.
2026_MCC_94505_1
MCC/H-1/123/2026
Open Tender
Civil Works
Percentage
300 days
DESIGN PROPOSAL LEISURE VALLEY, SECTOR 10, CHANDIG
Please refer tender documents
2 documents required · 2 mandatory
₹3,000
₹2.8 L
21 Aug 2026
4 Aug 2026
12 Aug 2026
4 Aug 2026
12 Aug 2026
4 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). as per direction of Engineer-in-charge. (DSR 15.2.1) | 1 | Cum | - | - |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size) DSR 4.1.10 | - | Cum | - | - |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:1½:3 (1 Cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). (DSR 4.1.2) | - | Cum | - | - |
| 4 | Centring and shuttering including strutting, propping etc. and removal of form for : Edges of slabs and breaks in floors and walls: Under 20 cm wide (Based on DSR 5.9.16.1) | 1 | Sqm. | - | - |
| 5 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (DSR 15.60) | 1 | Cum | - | - |
| 6 | Providing and fixing PCC kerbs of size 2’-0” x 9” having 4” thickness at bottom and 3” thickness at top and made of plain cement concrete 1:2:4 duly vibrated and compacted. The rates also includes the cost of filling and pointing of joints between kerbs with cement mortar 1:4 (1 cement 4 course sand) Complete in all respect to the entire satisfaction of Engineer In Charge. | - | Rmt. | - | - |
| 7 | Chipping or scraping and clearing upto 50mm depth of existing cement concrete pavement after cutting 10mm wide groove on two sides with average depth upto 50mm with blade & mechnical rotor in cement concrete pavement / paver / tile including arrangement of electricity generator for running of rotor machine, complete in all respect to the entire satisfaction of Engineer-in-Charge. | - | Rmt. | - | - |
| 8 | Providing and fixing coloured ceramic (Tactile) tile, ground surface indicators of size 300x 300mm of approved make for guiding/direction/warning to the visually impaired visitors, in the centre/side of the pedstrain/ approach pathway as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles as per design/ specification and guidelines complete in all respect to the entire satisfaction of Engineer-in charge. Note:- The tile shall be premium quality (1st quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT & JONHONSONS. | 1 | Sqm. | - | - |
| 9 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of quired size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) (D.S.R 10.28). | 1 | Kg. | - | - |
| 10 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. as required. (DSR 10.25.2) | 1 | Kg. | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.76 MB
BOQ_115952.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .