1. Disconnecting and Earthing device, 8 Pole, 2 Way, no OFF, ON LOAD 125A, 750 V AC(1000- Insulation with heavy duty Handle & pad Locking arrangement in earth position mounted with suitable enclosure for AC-23 duty conforming to IS 13947/IEC 60947 and Make: M1370827407 of M/s Schaltbau or Cat No. 73342SLB32LoGBSS of M/s L&T/Salzer as per Bill of Material (BOM) of RDSO's Spec. No. RDSO/PE/SPEC/AC/0184-2015 (Rev.0) as per Drg.No. N/A specn: IS/IEC:60947-3 (1999) and RCF Spec. EDTS 073 Amend 5 2. Electron Beam irradiated cured thin walled, multistranded Single Core, Copper flexible Cable of Size: 70 Sq.mm Grade Voltage: 1.8/3.V KV, RDSO Specn. No. ELRS/SPEC/ELC/0019, Rev. "2" of February/2011 3. Rotary Switch 300 Amps, 250 Volts DC, 4-Position, one pole, 3 way with OFF suitable for universal mounting having 3 nos. of seperating plate conforming to IS: 13947 Pt.III , Category-A similar to Cat. No. C3013YU22 of KAYCEE Make or D300 (prog no. 73319) of Salzer(L&T) Make.

AS PER CAPACITY CUM CAPABILITY AS PER 2.2 OF UNIFIED BIDDING DOCUMENT ATTACHED.

Land Border Criterion: This tender is governed by RB L/No- 2020/RS(G)/779/2 Dated-06.08.2020

There shall be no Exemption from submission of EMD for any tender or by any tenderer, except the following: (a) Micro and Small Enterprises (MSEs) registered for the tendered item. (b) Other Railways and Government Departments. (c) Indian Ordinance Factories. (d) PSUs owned by Ministry of Railways and PSUs for the group of items that are manufactured by them. (e) Vendors registered with Railways for the trade group of the item tendered. (f) Vendors appearing on the approved vendor lists of RDSO/PUs/CORE, for those specific items for which they are on approved list, subject to approval status being valid on the date of tender closing. (g) Vendors registeded with Railways for supply of medicine, medical equipments and consumables shall be exempted from submission of EMD for these items. (h) In tenders issued against PAC, OEM in whose favour PAC has been issued shall be exempted from submitting EMD, (i)KVIC and ACASH shall be exempted from EMD for items supplied by them. EMD Amount(rounded off to nearest higher Rs. 10(ten) @ 2% of estimated value of the tender subject to Max. Rs, 20 lakh. (i)All vendors, exempted from submitting EMD, as per para above, irrespective of type of tender, i.e., single, limited or open, shall be required to sign a bid securing declaration as per Annexure - B to this instruction. (ii) There shall be no exemption to such bidders from submitting EMD and SD for all tenders published during the period of time they are so disqualified as per the declaration signed by them. (iii) This para shall not be applicable for Govt. Departments/Ordinance factories/ Other Railways/ Railway PSUs/ KVIC/ACASH and matter shall be taken up with them departmentally/ administratively. Offers submitted without EMD shall be summarily rejected.

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy.

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

Technical/Commercial should be mentioned under deviation with proper remarks. Any deviations apart from the deviation remarks will not be considered as uploaded by Bidders as PDF etc.as part of their Bid/offer.