CERTAIN REPAIR TO FENCING AT BAKLOH

Amount

Excavating in post holes (or similar holes) each not exc 0.5 cu. m, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

Demolition of brick work or stonework built in cement mortar including all quoins, arches pillars etc but excluding ashlar facings ,dressed stonework and precast concrete articles and stacking the serviceable materials within 100m and disposal of unserviceable material, debris and rubbish to a distance not exceeding 100m complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete and disposal of unserviceable material, debris and rubbish to a distance not exceeding 100m complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion (embedded in concrete, brickwork, masonry) and making good disturbed ground, complete all as specified and directed.

Dismantling fencing wire mesh, any type, complete all as specified and directed.

PCC 1:3:6 (nominal mix) type C-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete complete all as specified and directed.

Mild steel wrok as post and struts in fencng including cutting tops to shape as directed. drilling holes, notching for wire etc. Flat irn fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, conforming to Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165)complete all as specified and as directed.

Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs (weighing 97 grams to 107 grams per Running Metre) at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), including taking out old barbed wire,all as specified. Note:- Weight of barbed wire per running metre shall be ascertained by BOO ordered by AGE(I) Dharamshala.

Restaining & resecuring existing barbed wire including making good staples, any type of stranded rails, straining bolts including securing or tying at croossings with provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), ,all as specified.

Supply Only Chain link MS galvanisd fencing, 3.8mm dia, PVC Coating wire (mesh size 100x100mm), made upto matress lapped wire ,all as specified.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire ,all as specified.

Brick work with old size fly ash bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar 1:6 all as specified & directed.

PCC 1:2:4, nominal mix, type B-1, using 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified.

Rendering cement plaster 15mm thick in cement mortar 1:6 on fair faces of brick wall or on concrete surfaces, surface finished even and smooth without using extra cement, all as specified.

Preparation of steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Preparation of new plastered surfaces or un plastered, previously undecorated wall surfaces and applying two coats of cement base paint, complete all as specified and directed.

Chequered cement concrete coloured tiles, homogenious texture glossy finished , chemically coated machine pressed 30 cm x 30cm x 25mm thick set, jointed and pointed in near cement slurry in floor with gray cement and pigment and including 20 mm thick cement screed in cement mortar 1:4 over and including 75mm thick PCC 1:3:6 (nominal mix) type C-2 (using 40mm graded crushed stone aggregates) complete all as specified and directed. Shade/Colour of tile shall be approved by the AGE (I).

Deduct Credit Amount as per Schedule of credit as details given on Srl Page No 20 of tender doucments.

M/S SHRI RAM BUILDERS

Roshan Lal Thakur

M/s. Rishav Sood

Havish Construction

M/s Aman Enterprises