Construction of Multi Purpose Community Hall at Amanburu Bundu Ranchi

Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foudation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l.

Earth filling in foundation trenches and plinth in layers not exceeding 150 mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation frenches within a lead of 50 M. and lift of 1.5 M all complete as per building specification and direction of E/l (Mode of measurement compacted volume).

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement complacted volume).

Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l.

Providing and laying in position cement of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-lll) :4 gradde stone aggregate 20 mm nominal size)

providing and laying in position specified grade of reinforced cement concrete ,excluding the cost of centering ,shuttering, finishing and reinforcement - All work up plinth level. 1:1.5.3 (1 cement :1.5 coarse sand (zone-lll): 3 graded stone aggregate 20mmnominal size)

reinforced cement concrete work in walls (any thickness), including attached pillasters, buttresses, plinth and string courses, fillets, columns, pillars, piers , abutments, posts and struts etc. above plinth level up to floor five level , excluding costo of centering, shuttering , finishing and reinforcement: 1:1:5:3 (1 cement :1.5 coarse sand(zone-lll) :3 graded stone aggregate 20mm nomimal size)

Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.

providing and laying damp- proof course 50mm thick with cement concrete 1:2:4 (1 cement :2 coarse sand (zone-lll) :4 grade stone aggregate 20mm nominal size).

Providing Designation 100A 112 mm thick reinforced B/W with Fly Ash Lime Brick (FALB) conforming to IS 12894-1990 (9"x4.5"x3") in cement mortar (1:4) in Superstructure with clean coarse sand of F.M. 2 to 2.5 including the cost of screening, raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.

Providing Designation 100A B/W with Fly Ash Lime Brick (FALB) conforming to IS 12894-1990 (9"x4.5"x3") in cement mortar (1:6) in Foundation and plinth with clean coarse sand of F.M. 2 to 2.5 including 10mm thick mortar joints,cost of screening, raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.

reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landing, balconies , shelves , chajjas , lintels , bands, plain windows sills, staircases and spiral stair cases above plinth level up to floor five level , excluding the cost of centering , shuttering , finishing and reinforcement, with 1:1:5:3 (1 cement :1.5 coarse sand (zone-lll) : 3 graded stone aggregate 20 mm nominal size )

Providing Tor steel reinforcement of 10mm. ,12mm & 16mm dia. bars as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. (a) 8mm (TMT,Coil Fe 500)

(b) 10mm (TMT,Coil Fe 500)

(c) 12-20mm ( TMT bar Fe 500)

Centring and shuttering icluding strutting propping etc and removal of form for Weather shade, chajjas, corbels etc including edges

Suspended floors, roofs, landings, balconies and access platform with waterproof ply 12 mm thick

Lintels, beams, plinth beams, girders, bressumers and cantilevers with waterproof ply 12mm thick

foundations, footings, bases of columns, etc. for mass concrete

Columns, Pillars, Piers, Abutments, Posts and Struts

Stairs, (excluding landings) except spiral-staircases

Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing 12 mm cement plaster (1:3) with clean coarse sand of F.M 1.5 with floating coat of neat cement in skirting including rounding of junctions with floor, curring, taxes and royalty all complete as per building specification and direction of E/l.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)

Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding, washing of floors and taxes all complete as per building specification and direction of E/l.

Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding, washing of floors and taxes all complete as per building specification and direction of E/l.

Providing and fixing fan hook of 16mm dia M.S. bar 1 metre long bent to required size and shape, placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/l. (where material is not supplied by deptt.)

Supplying, fitting and fixing 20 guage G.C.I, sheet gate fitted on M.S. Angle frame of size 60x60x6mm. including cost of fabrication , providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/l.

Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is not supplied by the deptt.)

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing rust , dirt, , scales , smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/l. ( Mode of measurement Area shall be multiplied by the co-efficient as indicated in building specification)

making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :6 agraded stone aggregate 20mm nominal size ) over 75mm thick bed of dry brick ballast 40mm nominal size , well rammed and consolidated and grouted with fine sand , including necessary excavation , levelling & dressing & finishing the top smooth.

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing, polishing and cost of curing, taxes and royalty all complete as per building specification and direciton of E/l. With "A" grade white 15 x 15 cm tiles.

Providing and laying double charge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. size of tile 600x600 mm

Providing and laying 25 mm thick kotah stone tiles in risers of steps, skirting and pillars of approved size, texture and colour laid over 12mm thick cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing 250mm. wide brick drain in cement mortar (1:6) with av. 250mm. clear depth and 250mm. apron including cost of earthwork involved with 75 mm. ~ cement concrete (1:4:8) over one brick designation 75A flat soling in proper grade and slope at the base, the drain duly plastered in C.M.(1:3) with punning over exposed surface all complete as per building specification and direction of E/l.

(a) Sand Lead 10 km

(b) Stone Chips with an av. Lead of 22 km

(c) Bricks - (1+7) km

Supplying fitting and fixing vitreous white glazed earthen ware I.W.C of parry Hindustan or any other I.S.S approved make with 100mm H.C.I 'p' trap 15 litres C.I pull and let go flushing cistern of names or other I.S.S equivalent make, complete with all fittings, C.I or C.C brackets 32mm alkathene / P.V.C telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I chain and pull including supplying and fixing a pair of vitrous white glazed earthenware ware footrest to be fixed in floor 15mm C.I body brass spindle stope cock of weight not less than 50grms, 15mm P.V.C connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. 580 mm long With 10 lit. low level PVC cistern

Supplying fitting and fixing 40mm high vitreous white glazed earthen E.W.C with 'p' trap of parry hindustan or any other approved I.S.S make including supplying and fixing 15 litres C.I mosquito proof low down flushing cistern of approved make with complete fittings with C.I handle and R.S or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450grams 15mm P.V.C alkathene pipe 45cm long with brass coupling at both ends and white/black plastic solid state seal and lead of commander cuckoo or ther I.S.S make with hinges or screws etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide priming all complete as per specification and direction of E/I.

Supplying fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or hindustan or any other I.S.S approved make supprted on painted C.I or R.S brackets 32mm C.I brass waste 15mm dia C.I body brass spindle stop cock of approved quality of weight not less than 350grams, 32mm P.V.C waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I.

Supplying fitting and fixing flat back or angular lipped front vitreous white glazed earthen ware urinal of 'Hindustan Parry' or any other approved I.S.S make with 5 liters capacity C.I automatic fulsing cistern of reliance for any other I.S.S approved make with all fitting with C.I or R.S brackets standard size G.I flush pipe with fitting clamps 15mm C.I body brass spindle stop cock of approved quality weight not less than 400grams, 15mm P.V.C/Alkthene pipe 450mm long with brass coupling at both ends and doing plumber joints including painting of exposed part with two coats of approved paint over a priming coat of red oxide cutting wall and floor making good the same etc. all complete as per specification and direction of E/I. (a) Flat back or standing corner (600mm*350mm)

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore

Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 15 mm nominal bore, weighing not less than 32 gms

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved mak Circular shape 450 mm diae and shade with 6 mm thick hard board backing :

Providing and fixing PTMT grating of approved quality and colour. Circular type 125 mm nominal dia with 25 mm waste hole

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes

20 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 25 mm nominal dia Pipes

32 mm nominal dia Pipes

40 mm nominal dia Pipes

Supplying materials and labours for constructing inspection chamber of designation class 75B bricks size 750mm deep, 600*450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600*475mm G.I cover with frame (weight not ness than 36 kg ) along with earth work in excavation and 80mm thick P.C.C, (1:3:6) in foundation and refilling all complete as per specification and direction of E/I.

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore

Polythene water storage tank of ISI mark (eg sintex / sinter. Himgiri/ gangotri) with cover & locking system.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I. (c) (i) C.P brass towel rail 20mm * 600mm with bracket container

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 75 mm Coupler

110 mm Coupler

75 mm Single pushfit Coupler

110 mm Single pushfit Coupler

75x75x75 mm Single tee with door

110x110x110 mm Single tee with door

75x75x75 mm Single tee without door

110x110x110 mm Single tee without door

75 mm bend Bend 87.5°

110 mm bend Bend 87.5°

75 mm Shoe Shoe (Plain)

110 mm Shoe Shoe (Plain)

Point wiring in PVC conduit, with modular type switch :- Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq. mm FR PVC insulated copper conductor single core in surface/recessed PVC conduit, with modular switch , modular plate suitable GI box etc as required. Group C

Power plug wiring in PVC conduit (2*4 sq. mm):- Wiring for light/power plug with 2 * 4 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, along with 1 No 4 sq.mm FR PVC insulated copper conductor single core cable for loop earthing etc as required.

Circuit/submain wiring in PVC conduit :- Wiring for circuit/submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit as required. 2*1.5 sq.mm + 1*1.5 sq.mm earth wire

2*2.5 sq.mm + 1*2.5 sq.mm earth wire

4*2.5 sq.mm + 2*2.5 sq.mm earth wire

4*10 sq.mm + 2*6 sq.mm earth wire

TV cable in existing conduit :- Supplying drawing co-axial TV cable RG-6 grand 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed steel / PVC conduit as required.

S/F PVC conduit :- Supplying and fixing of following sizes of PVC conduit along with accissories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm

S/F Modular type switch / socket :- Supplying and fixing of following modular switch / socket on the existing modular plate & switch box including connictions but excluding modular plate etc. as required. 5/6 amps, one way switch

15/16 amps, one way switch

5/6 amps, 3 pin socket outlet

5/6 amps, 6 pin socket outlet

S/F Modular type electronic fan regulator :- Supplying and fixing stepped type electronic fan regulator on the existing modular plate & fixing switch box including connections but excluding modular plate etc. as required.

S/F Modular type blanking plate :- Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

S/F Modular boxes, base & cover plate :- Supplying and fixing following size / module, GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 module (78mm* 78mm* 45mm)

4/5 module (78mm* 140mm* 50mm)

6 module (78mm* 205mm* 50mm)

S/F ceiling rose :- Supplying and fixing 2 pin 5 amps. Ceiling rose on the existing junction box/ wooen block including connertion etc as required.

S/F Batten holder :- Supplying and fixing Batten / Angle holder including connertion etc as required.

ITC ceiling fan :- Installation testing and commissioning of ceiling fan including wiring the down rods of standard length (upto 30cm) with 1.5 sqmm FR PVC insulated, copper conductor, single core cable etc. as required.

ITC exhaust fan upto 450mm sweep :- Installation of exhaust fan upto hole to suit the size of the above fan, making good the damage, connection, testing, commmissioning etc. as required.

S/F 20 amps SPN MCB industrial socket outlet :- Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top slongwith 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

S/F T.P MCB DB :- Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distrbution board, 415 volts, on surface / recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, inter connections, powder painted including earthing etc as required. (But without MCB/RCCB/Isolator) 8 way(4+24), Double door, Horizontal type

S/F 'C' series, MCB :- Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 KA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, esting and commissioning etc. as required. 6/32 amps, single pole

40 amps, TPN

S/F SP MCB blanking plate :- Supplying and fixing single pole blacking plate in the existing MCB DB complete etc as required.

S/F SPN RCCB :- Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections testing and commissioning etc as required. 40 amps

Earthing with G.I earth plate 600mm * 600mm * 6mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( with charcoal or coke and salt) as required.

Providing and fixing 25mm * 5mm G.I strip on surface or in recess for connection etc as required.

Providing and fixing 6 SWG dia G.I wire on surface or in recess for loop earthing along with existing surface / recessed conduit / submain wiring.

Supply of XLPE insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts. (conforming to IS-7098), (Part-1) 4 core, 16 sq.mm.

S.I.T.C of following rating recess / surface mounted LED round / square shape Down light luminarie with pressure die cast housing for single phase supply voltage. Luminarie shall be confirm to IS : 10322 part - 5 / section -2 or IFC : 62722 with all necessary accessories as required. 18/20W LED Round Down light

Bulk Head fitting with 9/10 Watt LED.

S.I.T.C of following rating surface mounted LED tube light fitting suitable for 230V 50Hz, single phase supply etc. complete as required. 10/12W LED Tube light

SITC of 300 mm (12") Exhaust fan (Metal boby) suitable for single phase 230 volts, 50 Hz, AC supply complete with motor, louvers/ shutters etc. complete as required. Make :- Usha/Crompton/Havells.

Supply Installation testing and commissioning of following size ceiling fan 3 Blades confirming to IS : 374:2019 including wiring the down rods of standard length (upto 30cm) with 1.5 sqmm FR PVC insulated, copper wire suitable for 230V 50Hz, single phase supply etc. complete as required. 1200mm (48") Ceiling Fan

200x 165x 125 mm dia borewell - Supplying all materials, labours, tools & equipments for drilling-do- (a) from 0.00 m to 50.0 m

(b) from 51.0 m to 150. m

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of useable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, including disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm dia

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 200 mm dia

S/F KIRLOSKER/ CRI make 1.5 HP submersible pump set having 100 m, including all taxes, royalty etc. all complete job as per direction of E/I.

(b) Starter 5 HP

(c) 2.5 mm copper finolex submersible cable

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 32 mm dia nominal bore

Add 18% GST

Add 1% Labour Cess