REPAIR TO FLOORING, PLINTH PROTECTION INCLUDING OTHER MISC WORKS AT FIRE RANGE, X AREA, L AREA AND MES COMPLEX AT AF STN DIGARU.

Amount

Dismantling of stone slabs & tiles of any description or thickness (except ceramic tiles) in floors, aprons etc. laid bedded & pointed in any mortar complete all as specified and directed.

M&L for Machine pressed precast conctete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n. exc 15cm thickness (Below or above ground level) un-reinforced complete all as specified and directed.

M&L for 100 MM thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in floors complete all as specified and directed.

M&L for 100 MM thick PCC 1:2:4 type B-1 using 20 mm graded aggregate as in floors complete all as specified and directed.

M&L for cement concrete 50 mm thick 1:3:6 Type C2 using 20 mm graded aggregate as in plinth protection

Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc.

M&L 15 mm rendering in CM 1:4 on on other than fair faces of brickwork or concrete surafaces complete all as specified and directed.

M&L for preparation of newly plastered surface and applying two coat of cement base paint complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (But not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles 300 x 250 x 7 / 450x350x7mm thicke, set and jointed in neat cement slurry & pointed with coloured cement to match over 10 mm rendering in CM 1:4 complete all as specified and directed

M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bedin CM 1:6 complete all as specified and directed

M&L TMT bars 10 mm dia and over cut to length bend to shape required, including cranking, bending spirally for hoping for columns hooking ends and binding with MS steel wire not less than 0.90 mm dia complete all as specified and directed.

M&L for providing Precast cement concrete PCC (1:2:4) type B1 using 20 mm graded stone aggregate set in cement mortar 1:6 as in man hole cover slab complete all as specified and directed.

Demolition of RCC of any description and any position not othervise provided for

Dismantling Asbestos cement (corrugated and semi-corrugated etc sheet) in roof coverings complete all as specified and directed.

M&L 6 mm thick asbestos cement, corrugated or semi-corrugated sheet fixed with coach screw in roofs walls etc complete all as specified and directed.

Dismantling boarding of any description fixed in any position

S&F boarding fixed with nails in any situation Clean sawn with butt joints of 2nd class hardwood thickness 20 mm complete all as specified and directed.

M&L Preparing new surfaces of wood of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Fixing only second class hardwood Weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps complete all as specified and directed.

M&L Preparing old surfaces of wood of any description not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply only sand for fire range

M/S. SUBHAS CONSTRUCTION CO.

M/s Dhruv Enterprises

MS DAS CONSTRUCTION

M/S B.H. ENTERPRISE

M/S Vimal Enterprise

M/S DAS CONSTRUCTION

M/s Capital Traders