Strengthening, up gradation and increasing the height of Rathian Head Gates installed on D10 distributary of Ranbir Canal

Amount

Rathian Head gates-I (5'6"x2'9") :- Strengthening to gate by way of extracting the gate outside the frame using long boom crane, manual labour after dismantling spindle/stem rod and outer assembly of the gate. Shifting of the gate and winch mechanism to workshop for repairs using manual labour and carriage vehicle. Providing and fabrication of new stem rod with outer square threads as per the size. Fabrication of new stem rod nut with internal threading of same pitch as stem rod and supports to be fitted in outer body of the winch machine. Fabrication of new leaf of gate size 5 ft 6 inches x 2 ft 9 inches approx., using the ISMC 75 channel size with vertical & horizontal cross members for support by way of cutting as per required size and then welding using superior quality electrodes. The leaf is to be fabricated with horizontal supports and vertical supports at equidistance from each other. The supports should be fabricated out of ISMC 75 channel. Providing and welding the MS sheet of 6 mm thickness on the frame of fabricated from MS channel. Fabrication of L shaped clamps attaching stem rod attachment during up and downward moment of gate with providing and fitting of nuts and bolts. Servicing of the winch machine by removing the old grease and washing / cleaning with kerosene oil or any other solvent to make it dust free and then greasing & oiling using ISI mark standard quality grease for smooth, easy up and down moment of gate. Increasing the height of gate by way of providing, fitting and fabrication of frame from ISMB 100 channel over the existing channel to support the winch machine. Drilling of holes in channels as per the profile of winch machine. Increasing the height of the supporting channel by 12 inches approx. by way of grouting the supporting channel in concrete in ratio of 1:3:6. Removal of old paint by sand paper and painting of both winch machine and gate with one coat of metal primer and two coats of paint. Shifting back repaired gate and winch machine to site of installation. Reinstallation of the gate at site and checking the up and down moment. The job includes cost of material, charges for skilled manual labour, crane, tools and tackles, hire charges of DG set for welding at the location of installation of gate. Note:- The tenderers are requested to visit the site and quote the rate as per site conditions. Any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions. Rathian Head gates-II (5'6"x2'9") :- Strengthening of gate by way of dismantling of damaged stem rod from the gate, completely dismantling of winch machine and stem rod from the gate structure. Fabrication, Providing and fitting of 3 ton capacity manually operated, worm gear type winch machine with base plate of suitable size and one number stem rod threading along its length for up and down movement of gate. Job includes drilling of holes on top hoisting channels, base plate for fixing winch machine and stem rod. Providing and fitting of new fastening bolts and nuts for fixing with frame of the gate. Repairs to the leaf of the gate by straightening on heavy duty hydraulic press, welding at worn out portions of the skin plate with quality MS electrodes. Increasing the height of gate by way of providing, fitting and fabrication of frame from ISMB 100 channel over the existing channel to support the winch machine. Drilling of holes in channels as per the profile of winch machine. Increasing the height of the supporting channel by 12 inches approx. by way of grouting the supporting channel in concrete in ratio of 1:3:6. Removal of old paint by sand paper and painting of both winch machine and gate with one coat of metal primer and two coats of paint. Shifting back repaired gate and winch machine to site of installation. Reinstallation of the repaired gate at site and checking the up and down movement. The job includes cost of material, charges for skilled manual labour, crane, tools and tackles, hire charges of DG set for welding at the location of installation of gate. Note:- The tenderers are requested to visit the site and quote the rate as per site conditions. Any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions.. Rathian Head gates-III (5'6"x2'9"):- Servicing/ Repair to gate by way of extracting the gate outside the frame using long boom crane, manual labour after dismantling spindle/stem rod and outer assembly of the gate. Shifting of the gate and winch mechanism to workshop for repairs using manual labour and carriage vehicle. Providing and fabrication of new stem rod with outer square threads as per the size. Fabrication of new stem rod nut with internal threading of same pitch as stem rod and outer arm supports to be fitted in outer body of the winch machine. Repairs to the connecting mechanism by providing and replacement of new studs. Repairs to the leaf of the gate by straightening on heavy duty hydraulic press, replacement of lower support of the gate, welding at worn out portions of the skin plate with quality MS electrodes. Servicing of the winch machine by removing the old grease and washing / cleaning with kerosene oil or any other solvent to make it dust free and then greasing & oiling using ISI mark standard quality grease for smooth, easy up and down moment of gate. Increasing the height of gate by way of providing, fitting and fabrication of frame from ISMB 100 channel over the existing channel to support the winch machine. Drilling of holes in channels as per the profile of winch machine. Increasing the height of the supporting channel by 12 inches approx. by way of grouting the supporting channel in concrete in ratio of 1:3:6. Removal of old paint by sand paper and painting of both winch machine and gate with one coat of metal primer and two coats of paint. Shifting back repaired gate and winch machine to site of installation. Reinstallation of the repaired gate at site and checking the up and down movement. The job includes cost of material, charges for skilled manual labour, crane, tools and tackles, hire charges of DG set for welding at the location of installation of gate. Note:- The tenderers are requested to visit the site and quote the rate as per site conditions. Any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions. Rathian Head gates-IV (5'6"x2'9") :- Strengthening to gate by way of extracting the gate outside the frame using long boom crane, manual labour after dismantling spindle/stem rod and outer assembly of the gate. Shifting of the gate and winch mechanism to workshop for repairs using manual labour and carriage vehicle. Repair to stem rod by straightening and turning of outer square threads as per the size and pitch of the stem rod nut. Fabrication of new stem rod nut with internal threading of same pitch as stem rod and supports to be fitted in outer body of the winch machine. Repairs to the connecting mechanism by providing and replacement of new studs. Fabrication of new leaf of gate size 5 ft 6 inches x 2 ft 9 inches approx., using the ISMC 75 channel size with vertical & horizontal cross members for support by way of cutting as per required size and then welding using superior quality electrodes. The leaf is to be fabricated with horizontal supports and vertical supports at equidistance from each other. The supports should be fabricated out of ISMC 75 channel. Providing and welding the MS sheet of 6 mm thickness on the frame of fabricated from MS channel. Fabrication of L shaped clamps attaching stem rod attachment during up and downward moment of gate. Servicing of the winch machine by removing the old grease and washing / cleaning with kerosene oil or any other solvent to make it dust free and then greasing & oiling using ISI mark standard quality grease for smooth, easy up and down movement of gate. Increasing the height of gate by way of providing, fitting and fabrication of frame from ISMB 100 channel over the existing channel to support the winch machine. Drilling of holes in channels as per the profile of winch machine. Increasing the height of the supporting channel by 12 inches approx. by way of grouting the supporting channel in concrete in ratio of 1:3:6. Removal of old paint by sand paper and painting of both winch machine and gate with one coat of metal primer and two coats of paint. Shifting back repaired gate and winch machine to site of installation. Reinstallation of the gate at site and checking the up and down moment. The job includes cost of material, charges for skilled manual labour, crane, tools and tackles, hire charges of DG set for welding at the location of installation of gate. Note:- The tenderers are requested to visit the site and quote the rate as per site conditions. Any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions. Rathian Head minor- V ( 2 ft x 2.8 ft):- :- Servicing of the gate by way of extracting the gate outside the frame using long boom crane, manual labour after dismantling spindle/stem rod and outer assembly of the gate. Shifting of the gate and winch mechanism to workshop for repairs using manual labour and carriage vehicle. Repair to stem rod by straightening and turning of outer square threads as per the size and pitch of the stem rod nut Fabrication of new stem rod nut with internal threading of same pitch as stem rod and outer arm supports to be fitted in outer body of the winch machine. Repairs to the connecting mechanism by replacing the connecting rod and replacement of studs. Fabrication of new leaf of gate size 2 feet x 2 ft 8 inches approx., using the ISMC 75 channel size with vertical & horizontal cross members for support by way of cutting as per required size and then welding using superior quality electrodes. The leaf is to be fabricated with horizontal supports and vertical supports at equidistance from each other. The supports should be fabricated out of ISMC 75 channel. Providing and welding the MS sheet of 6 mm thickness on the frame of fabricated from MS channel. Fabrication of L shaped clamps attaching stem rod attachment during up and downward moment of gate. Servicing of the winch machine by greasing & oiling using standard quality grease after removing the old grease and washing / cleaning with kerosene oil or any other solvent to make it dust free. Removal of old paint by sand paper and painting of both winch machine and gate with one coat of metal primer and two coats of paint. Shifting back repaired gate and witch machine to site of installation. Reinstallation of the repaired gate at site and checking the up and down movement. The job includes cost of material, charges for skilled manual labour, crane, tools and tackles, hire charges of DG set for welding at the location of installation of gate. Note:- The tenderers are requested to visit the site and quote the rate as per site conditions. Any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions. Rathian Head gates-I (5'6"x2'9") :- Strengthening to gate by way of extracting the gate outside the frame using long boom crane, manual labour after dismantling spindle/stem rod and outer assembly of the gate. Shifting of the gate and winch mechanism to workshop for repairs using manual labour and carriage vehicle. Providing and fabrication of new stem rod with outer square threads as per the size. Fabrication of new stem rod nut with internal threading of same pitch as stem rod and supports to be fitted in outer body of the winch machine. Fabrication of new leaf of gate size 5 ft 6 inches x 2 ft 9 inches approx., using the ISMC 75 channel size with vertical & horizontal cross members for support by way of cutting as per required size and then welding using superior quality electrodes. The leaf is to be fabricated with horizontal supports and vertical supports at equidistance from each other. The supports should be fabricated out of ISMC 75 channel. Providing and welding the MS sheet of 6 mm thickness on the frame of fabricated from MS channel. Fabrication of L shaped clamps attaching stem rod attachment during up and downward moment of gate with providing and fitting of nuts and bolts. Servicing of the winch machine by removing the old grease and washing / cleaning with kerosene oil or any other solvent to make it dust free and then greasing & oiling using ISI mark standard quality grease for smooth, easy up and down moment of gate. Increasing the height of gate by way of providing, fitting and fabrication of frame from ISMB 100 channel over the existing channel to support the winch machine. Drilling of holes in channels as per the profile of winch machine. Increasing the height of the supporting channel by 12 inches approx. by way of grouting the supporting channel in concrete in ratio of 1:3:6. Removal of old paint by sand paper and painting of both winch machine and gate with one coat of metal primer and two coats of paint. Shifting back repaired gate and winch machine to site of installation. Reinstallation of the gate at site and checking the up and down moment. The job includes cost of material, charges for skilled manual labour, crane, tools and tackles, hire charges of DG set for welding at the location of installation of gate. Note:- The tenderers are requested to visit the site and quote the rate as per site conditions. Any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions. Rathian Head gates-II (5'6"x2'9") :- Strengthening of gate by way of dismantling of damaged stem rod from the gate, completely dismantling of winch machine and stem rod from the gate structure. Fabrication, Providing and fitting of 3 ton capacity manually operated, worm gear type winch machine with base plate of suitable size and one number stem rod threading along its length for up and down movement of gate. Job includes drilling of holes on top hoisting channels, base plate for fixing winch machine and stem rod. Providing and fitting of new fastening bolts and nuts for fixing with frame of the gate. Repairs to the leaf of the gate by straightening on heavy duty hydraulic press, welding at worn out portions of the skin plate with quality MS electrodes. Increasing the height of gate by way of providing, fitting and fabrication of frame from ISMB 100 channel over the existing channel to support the winch machine. Drilling of holes in channels as per the profile of winch machine. Increasing the height of the supporting channel by 12 inches approx. by way of grouting the supporting channel in concrete in ratio of 1:3:6. Removal of old paint by sand paper and painting of both winch machine and gate with one coat of metal primer and two coats of paint. Shifting back repaired gate and winch machine to site of installation. Reinstallation of the repaired gate at site and checking the up and down movement. The job includes cost of material, charges for skilled manual labour, crane, tools and tackles, hire charges of DG set for welding at the location of installation of gate. Note:- The tenderers are requested to visit the site and quote the rate as per site conditions. Any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions.. Rathian Head gates-III (5'6"x2'9"):- Servicing/ Repair to gate by way of extracting the gate outside the frame using long boom crane, manual labour after dismantling spindle/stem rod and outer assembly of the gate. Shifting of the gate and winch mechanism to workshop for repairs using manual labour and carriage vehicle. Providing and fabrication of new stem rod with outer square threads as per the size. Fabrication of new stem rod nut with internal threading of same pitch as stem rod and outer arm supports to be fitted in outer body of the winch machine. Repairs to the connecting mechanism by providing and replacement of new studs. Repairs to the leaf of the gate by straightening on heavy duty hydraulic press, replacement of lower support of the gate, welding at worn out portions of the skin plate with quality MS electrodes. Servicing of the winch machine by removing the old grease and washing / cleaning with kerosene oil or any other solvent to make it dust free and then greasing & oiling using ISI mark standard quality grease for smooth, easy up and down moment of gate. Increasing the height of gate by way of providing, fitting and fabrication of frame from ISMB 100 channel over the existing channel to support the winch machine. Drilling of holes in channels as per the profile of winch machine. Increasing the height of the supporting channel by 12 inches approx. by way of grouting the supporting channel in concrete in ratio of 1:3:6. Removal of old paint by sand paper and painting of both winch machine and gate with one coat of metal primer and two coats of paint. Shifting back repaired gate and winch machine to site of installation. Reinstallation of the repaired gate at site and checking the up and down movement. The job includes cost of material, charges for skilled manual labour, crane, tools and tackles, hire charges of DG set for welding at the location of installation of gate. Note:- The tenderers are requested to visit the site and quote the rate as per site conditions. Any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions. Rathian Head gates-IV (5'6"x2'9") :- Strengthening to gate by way of extracting the gate outside the frame using long boom crane, manual labour after dismantling spindle/stem rod and outer assembly of the gate. Shifting of the gate and winch mechanism to workshop for repairs using manual labour and carriage vehicle. Repair to stem rod by straightening and turning of outer square threads as per the size and pitch of the stem rod nut. Fabrication of new stem rod nut with internal threading of same pitch as stem rod and supports to be fitted in outer body of the winch machine. Repairs to the connecting mechanism by providing and replacement of new studs. Fabrication of new leaf of gate size 5 ft 6 inches x 2 ft 9 inches approx., using the ISMC 75 channel size with vertical & horizontal cross members for support by way of cutting as per required size and then welding using superior quality electrodes. The leaf is to be fabricated with horizontal supports and vertical supports at equidistance from each other. The supports should be fabricated out of ISMC 75 channel. Providing and welding the MS sheet of 6 mm thickness on the frame of fabricated from MS channel. Fabrication of L shaped clamps attaching stem rod attachment during up and downward moment of gate. Servicing of the winch machine by removing the old grease and washing / cleaning with kerosene oil or any other solvent to make it dust free and then greasing & oiling using ISI mark standard quality grease for smooth, easy up and down movement of gate. Increasing the height of gate by way of providing, fitting and fabrication of frame from ISMB 100 channel over the existing channel to support the winch machine. Drilling of holes in channels as per the profile of winch machine. Increasing the height of the supporting channel by 12 inches approx. by way of grouting the supporting channel in concrete in ratio of 1:3:6. Removal of old paint by sand paper and painting of both winch machine and gate with one coat of metal primer and two coats of paint. Shifting back repaired gate and winch machine to site of installation. Reinstallation of the gate at site and checking the up and down moment. The job includes cost of material, charges for skilled manual labour, crane, tools and tackles, hire charges of DG set for welding at the location of installation of gate. Note:- The tenderers are requested to visit the site and quote the rate as per site conditions. Any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions. Rathian Head minor- V ( 2 ft x 2.8 ft):- :- Servicing of the gate by way of extracting the gate outside the frame using long boom crane, manual labour after dismantling spindle/stem rod and outer assembly of the gate. Shifting of the gate and winch mechanism to workshop for repairs using manual labour and carriage vehicle. Repair to stem rod by straightening and turning of outer square threads as per the size and pitch of the stem rod nut Fabrication of new stem rod nut with internal threading of same pitch as stem rod and outer arm supports to be fitted in outer body of the winch machine. Repairs to the connecting mechanism by replacing the connecting rod and replacement of studs. Fabrication of new leaf of gate size 2 feet x 2 ft 8 inches approx., using the ISMC 75 channel size with vertical & horizontal cross members for support by way of cutting as per required size and then welding using superior quality electrodes. The leaf is to be fabricated with horizontal supports and vertical supports at equidistance from each other. The supports should be fabricated out of ISMC 75 channel. Providing and welding the MS sheet of 6 mm thickness on the frame of fabricated from MS channel. Fabrication of L shaped clamps attaching stem rod attachment during up and downward moment of gate. Servicing of the winch machine by greasing & oiling using standard quality grease after removing the old grease and washing / cleaning with kerosene oil or any other solvent to make it dust free. Removal of old paint by sand paper and painting of both winch machine and gate with one coat of metal primer and two coats of paint. Shifting back repaired gate and witch machine to site of installation. Reinstallation of the repaired gate at site and checking the up and down movement. The job includes cost of material, charges for skilled manual labour, crane, tools and tackles, hire charges of DG set for welding at the location of installation of gate. Note:- The tenderers are requested to visit the site and quote the rate as per site conditions. Any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions.

Rebate on Old Parts

GANPATI ELECTRICAL AND MECHANICAL WORKS

N B Engineering and Electric Works