Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.3 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹13.2 L+₹70,785 (5.68%)Rejected-Finance 329 COD COLONY KOYLA NAGAR PO KIDWAI NAGAR KANPUR 208011 | KANPUR | KANPUR | UTTAR PRADESH | 208011 | L2 | Rejected-Finance BEING L2 | |
| 3 | L3₹14.7 L+₹2.2 L (17.7%)Rejected-Finance | L3 | Rejected-Finance BEING L3 |
Tender Value
₹18.5 L
EMD Value
₹37,000
Closing Date
29 Mar 2021, 6:00 pmClosed
GE I R and D Kanpur
GE I R and D Kanpur DMSRDE Complex, GT Road Kanpur 208013
REPAIR/ REPLACEMENT OF DG SETS, GLOW SIGN BOARD, FIREFIGHTING EQUIPMENTS, FLOOD LIGHT AND OTHER CONNECTED WORKS UNDER GE(I) R AND D KANPUR.
2021_MES_427168_1
8237/E8
Open Tender
Electrical and Maintenance Works
Item Rate
183 days
RV Colony, War Memorial Colony and Technical area
As per NIT
8 documents required · 8 mandatory
₹500
GE I R and D Kanpur
₹37,000
20 May 2021
2 Mar 2021
31 Mar 2021
2 Mar 2021
29 Mar 2021
15 Mar 2021
Amount
Dismantling fuel pump, radiator assembly, and other accessories of DG sets installed at Pump House No 04 and 05 at R V Colony under GE (I) R&D Kanpur all as specified and directed by Engr- In -Charge.
Cleaning and overhauling of Fuel pump including replacement of SET OF HIGH PRESSURE PIPES (DHA394) of diesel engine all as specified and directed by Engr- In -Charge.
Cleaning of radiator assy including leakage rectification, replace ment of hose pipe and minor spares all as specified and directed by Engr- In -Charge.
Cleaning of fuel tank assy including leakage rectification, replace ment of fuel indication pipe/ glass all as specified and directed by Engr- In -Charge.
Servicing of Diesel generating set as per manufacturers instruction including replacement of all defective parts required for making smooth functional of the DG Set complete all as directed by Engr-in-Charge.
Supply & fixing Engine START PUSH BUTTON - SCHNIDER MAKE (XB5AA31N) all as directed by Engr-in-Charge.
Supply & fixing Engine STOP PUSH BUTTON - SCHNIDER MAKE (XB5AA31N) all as directed by Engr-in-Charge.
Supply & fixing RED, GREEN & YELLOW INDICATION LAMP 12V DC all as directed by Engr-in-Charge.
Supply & fixing LUB OIL FILTER ELEMENT all as directed by Engr-in-Charge.
Supply & fixing set of fuel filter ( primary and secondary) element all as directed by Engr-in-Charge.
Supply & fixing fuel supply pipe line of fuel tank to FIP of DG set all as directed by Engr-in-Charge.
Supply & changing engine oil suitable for diesel engine of DG set installed at RV Colony all as directed by Engr-in-Charge.
Supply & filling of coolent for DG set of any cap all as directed by Engr-in-Charge.
S & F Automatic voltage regulator for DG set of cap up a\110 KVA complete all as specified and directed.
Supply and Fix Change over Switch, on load type in open execution, front handle operated, 415V with rating of 160 A , four pole including fixing in panel with all accessaries complete all as specified and directed by GE (I). Make : Indo Asian/ Legrand / Havells/L&T as approved by GE (I).
M&L for fully automatic star delta starter in replacement suitable for 40 HP pump set with relay 45-75 Amp in sheet metal enclosure complete with all electric connection. Make : L&T MU-G 50 FASD cat part No CS 96009 /Havells.
Routine/periodical cleaning the inside area of pump areaincluding cutting/removal of uprouting of unwanted grass,bushes and small trees near all around sub station and pump house complex complete including surface dressing and levelling by surfave excavation complete all as directed.
Supply, fixing, connecting and testing in replacement of worn out battery by sealed lead acid battery, 12 Volt DC, 140 AH duly charged including replacement of copper connection lead of suitable size with terminal clamps complete all as specified and directed. Make - Exide/Amco/Amron as approved by GE(I)
S & F Automatic battery Charger AC input 230 + 10% Voltage output DC suitable for 2x12 Volt( 24 Volt) 180 Ah battery charging complete all as specified and directed. Make : Elak Pvt Ltd model AC 04 or equivalent as approved by GE(I).
S & F battery bank cosisting of 15 battery of 2 volt, 100 AH DC complete with battery charging set and connected cables of suitable size for HT 11 KV panel board all as specified and directed. Make : Elak Pvt Ltd model AC 04 or equivalent as approved by GE(I).
M&L Design, Manufacture, Supply, install and commission replacement of old wrusted unserviceble LED display board of following sizes having compact design vandalism resistant features and maintinance friendly, Thhe base of board made of ACP (Aluminium composit panel) 3mmthick and back side of board covered with GL sheet 24SWG, the letters and boarders made of acrylic sheet 3mm thick of colour as aprooved by GE(I). LED strip should as per requirment of letter space, the display language may be English/Hindi (Alpha numeric), its visibility should be shuitable for day and night(Out door application) and should be visible upto 25 Mtrs. (Minimum), the text effect should be static, the LED mean time between failure arrangement should not beless than 40000 hrs, suitable for poer supply 230 volts/50 Hz AC, with timer to switch ON and OFF the power supply to the display board. The board shall be suitably braced on backside with iron 40 mm X 40 X 6 mm and conneted to the mounting arrangement with sheet metal enclosure in CRCA Zinc coated sheet IP 54 grade, silver colour powder coated of minimum thickness of 40 microns alongwith aditional layer of transparent insulation film properly mounted/secured on wall/columns through stainless steel SS 304 or other applicable class mounting brackets and making good of disturbed surfaces as per original complete all as specified and directed by GE(I). (a) Recugalar board having max 60 letters of characters in English language letter or character size, height not exceeding 255 mm and back depth Max 45 mm of suitable width & one logo of dia not exceeding 450 mm and back depth 80 mm as per sample.
Material and labour for repair of LED glow sign board any size including replacement of acarlic/PVC sheet , letters any type and paisting with glue, including adapter if required at site complete testing and fixed at exixting location all as required and directed at site
Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre deep in soft/loose soil and getting out for cable complete all as specified and directed.
Returning filling of excavated soil after laying the cable with spreading leveling watering and well ramming in layers not exceeding 25cm thick in loose/soft soil complete all as specified and directed.
Removal of surplus soil/excavated material obtained from ground level to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above from the starting point complete all as specified and directed.
Supply & spreading local sand obtained from ganga river in trenches for cable cushioning complete all as specified and directed.
Supply & laying /paving of dry well burnt bricks of sub class ‘B’ laid flat of whole brick over the cable after spreading the sand for cable protection complete all as specified and directed.
Cutting & Chasing required on concrete block /path/tile /floor/ wall not exceeding 20 cm girth to concealed the cable/GI wire and making good to disturbed surface with cement mortar 1:3 including facing / finishing where as required to match with existing surfaces complete all as specified and directed.
Takingout unserviceable cable any type from trenches,pole, road,duct etc including necessary joints(U/S)fittings and pipes etc complete all as specified and directed
Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated PVC bedded armored heavy duty electric cable 1100V grade with aluminum conductor of cross sectional are 10 Sq mm 2 core .complete all as specified and directed
Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated PVC bedded armored heavy duty electric cable 1100V grade with aluminum conductor of cross sectional are 16 Sq mm 2 core .complete all as specified and directed
M & L for Earthing complete with galvanised steel earthpipe of 3000mm long and 65mmouter x50mm inner dia laid in ground by drilling in the ground as required with filling the back fill compound complete with all as required and directed with 32x6mm GI strip up to testing point and making the earth pit of PCC as per sample as required at site and testing after completion complete all as specified and directed.Make HP earth or eqvt . Note : Earthing strip upto 7.5 metre length shall be deemed to be included in quoted unit rate.
Supply, fixing and testing in replacement of Old unserviceable/ worn out Aviation light by integral LED Aviation light of 302 LED comprising ofaluminium housing with polycarbonate enclosure complete all as specified and directed including all accessories complete. Make :Bajaj Cat No 110731/ Phillips/CG/ /Havells as approved by GE (I).
Supply, fixing and testing in replacement of Old unserviceable/ worn out flood light fitting by Turbo LED flood light 180 watt 240 volt with secondary optics made in pressure die cast housing a LED flood light high efficiency in built integrated electronic LED driver complete all as specified and directed including all accessories complete . Make :Bajaj Cat No 169658/ Havells Cat No LHFPCZBFP46J180/ Crompton Cat No LSFO-200-CDL/60 as approved by GE (I).
Supply, fixing and testing in replacement of Old unserviceable/ worn out flood light fitting by Turbo LED flood light 120 Watt, 240 volt with secondary optics made in pressure die cast housing and heat sink in aluminium extursion with IP 66 protection high efficiency in built integrated electronic LED driver complete all as specified and directed including all accessories complete . Make : Bajaj Cat No 169641/ Havells Cat No LHFPCZBFP46J120/ Crompton Cat No LFLN-150-CDL/60 as approved by GE (I).
Supply, fixing and testing in replacement of Old unserviceable/ worn out post top lantern with LED post top lantern 40 Watt by pressure die cast powder coated LED high efficiency in built integrated electronic LED driver IP 65 protection complete all as specified and directed including all accessories complete . Make : Bajaj Cat No 112364/ Havells cat no LHEVBGP7PN6K040/ Crompton Cat No LPTO-40-CDL as approved by GE (I).
Supply and Fix MCCB optimum 2.1 (Electronic/Microprocessor range with continuously adjustableThermal and Adjustable Magnetic Release, Four Pole, 415 VAC, Current rating- 400 Amps, Breaking capacity ( Ics ) - 50 KA,including suitable size aluminium bus bar for connection complete with extension bus bar of suitable size all as specified and directed by GE (I). Make : cat part No 830541of Indo Asian or equivalent of Havells/Legrand / Seimens/Schneider/Hager as approved by GE (I).
Supply and Fix MCCB with continuously adjustableThermal and Adjustable Magnetic Release, Four Pole, 415 VAC, Current rating- 200 Amps, Breaking capacity ( Ics ) - 36 KA,including suitable size aluminium bus bar for connection complete all as specified and directed by GE (I). Make : cat part No 830355 of Indo Asianor equivalent of Havells/Legrand / Seimens/Schneider/Hager as approved by GE (I).
Supply of FR PVC insulated, PVC sheathed flat twin core, solid aluminium conductor cable of size 6 sq mm for voltage grade upto 1100 volt confirming to IS- 694/1990 with latest amendments and ISI marked including removing old connection and making service connections to street light feeder. Make : Polycab or its equivalent of EON (Indo Aian) / Havells/ Paragon Electron/ Plaza/Rallison as approved by GE(I).
Supply of Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminiumconductor of 10 sqmm , served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable flat or circular ® to street light feeder. Make : Polycab or its equivalent of EON (Indo Aian) / Havells/ Paragon Electron/ Plaza/Rallison as approved by GE(I).
Supplying and fixing Hose box made of 18 gauge MS Sheet 800mm X 600mm X 250mm with double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red out side and brilliant white inside the box.
Supply and fixing Non Return butterfly Valve complete all as specified and directed by Engr-in-charge.
Supply and fixing Gate Valve brass spindle 80 mm dia complete all as specified and directed by Engr-in-charge.
Supply and fixing C P hose of 15 mtr long complete all as specified and directed by Engr-in-charge.
Supply and fixing Fire Hydrant including valve single headed complete all as specified and directed by Engr-in-charge.
Supply and laying including taking down GI pipes Heavy Class 80 mm dia complete with all fitting and T & P as rrquired at site confirming to IS all as specified and directed by Engr-in-charge.
Supply and fixing Fire brigade inlet connection 2way complete all as specified and directed by Engr-in-charge.
DEO Traders
VEE KAY ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .