Retrofitting - Repairing and Renovation of Main Showroom of Khadi Gramodyog Bhawan at 24 Regal Building, Connaught place, New Delhi.

ABSTRACT OF COST

S. NO Description of Item Unit RATE DSR Qty DSR Amount NDSR Amount

SH-1 2.00 EARTH WORK

Earth work in Excavation by mechanical means (Hydraulic excavator)/manualmeans over areas

(exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including getting out and

disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-

2.6.1 All kinds of soil Cum 177.89 48 8,572

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or

stacked materials.

2.26.1 All kinds of soil Cum 127.08 19 2,362

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in

2.25 layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and Cum 196.43 13 2,478

watering, lead up to 50 m and lift upto 1.5 m.

2.34 Supplying chemical emulsion in sealed containers including delivery as specified.

2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% Ltr 235.26 45 10,587

SH-2 4.00 CONCRETE WORKS

Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone

aggregate 40 mm nominal size derived from natural sources)

SH-3 5.00 REINFORCED CEMENT CONCRETE WORK

5.90 Centering and shuttering including strutting, propping etc. and removal of form for :

5.9.1 Foundations, footings, bases of columns, etc. for mass concrete. Sqm 393.01 17 6,641

5.9.2 Walls (any thickness) including attached pilasters, butteresses,plinth and string courses etc. Sqm 844.35 883 7,45,452

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and

binding all complete upto plinth & above plinth level.

5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more Kg 108.09 1,842 1,99,042

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete above plinth level.

5.22.A Mild steel and Medium Tensile steel bars Kg 107.33 4,181 4,48,780

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced

cement concrete work; using coarse aggregate and fine aggregate derived from natural sources,

Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended

proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and

workability without impairing strength; including pumping of concrete to site of laying, curing, carriage

for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per

direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10%

of the minimum specified cement content in design mix shall be payable separately. In case the cement

content in design mix is more than 110% of the specified minimum cement content, the contractor

shall have discretion to either re-design the mix or bear the cost of extra cement.

5.33.1 ll works upto plinth level

5.33.1.2 Concrete of M30 grade with minimum cement content of 350 kg /cum Cum 9,676.85 13 1,25,280

5.33.2 Concrete of M30 grade with minimum cement content of 350 kg /cum

5.33.2.2 All works above plinth level upto floor V level. Cum 10,033.27 25 2,45,822

SH-4 6.00 MASONRY WORK

Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS

:12894, in super structure above plinth and upto floor V level

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) Sqm 1,126.26 188 2,12,285

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level in all shapes and sizes in :

6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) - -

TOTAL MASONRY WORK 4,33,584

SH-5 8.00 Cladding

Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement

: 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete.

8.9.1 8mm thick Granite of any colour and shade Sqm 3,625.47 60 2,18,463

Providing and fixing specified of lining flat pressed three layer (medium density)particle board

or grade wood Pre-laminated one side decorative lamination and other side balancing

lamination Grade-I, Type-II, IS : 12823 marked, including priming coat on unexposed

arrangement and screws etc . complete :

Abstract Civil Digitally signed by MAYANK

Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl

plug and drilling necessary holes for rawl plug etc. including priming coat complete.

8.27.1 Kiln seasoned and chemically treated hollock wood Cum 1,87,687.80 0 79,498

Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328

8.28 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed

8.28.1 Decorative veneer facings of approved manufacture Sqm 1,950.51 177 3,45,767

Total cladding work 8,97,815

SH-6 8.00 MARBLE & GRANITE WORK

Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished,

machine cut for kitchen platforms, vanitycounters, window sills, facias and similar locations of

required size,approved shade, colour and texture laid over 20 mm thick base cementmortar

8.2 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment,

epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss

finish etc. completeat all levels.

8.2.2 Granite stone slab colour black, Cherry/Ruby red

8.2.2.1 Area of slab upto 0.50 sqm Sqm 5,425.36 1 5,425

8.2.2.2 Area of slab above. 0.50 sqm Sqm 5,147.55 14 70,767

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including

8.3 machine polishing to edge to give high gloss finish etc.complete as per design approved by

Engineer-in-Charge.

8.3.2 Granite work Metre 512.07 31 16,094

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and

8.4 drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. Metre 569.80 31 17,909

Extra for providing opening of required size & shape for wash basins / kitchens sink in kitchen

platform, vanity counters and similar location in marble / Granite /stone work including Each

necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. opening

TOTAL MARBLE & GRANITE WORK 1,20,986

SH-7 9 WOOD & PVC WORK

Providing wood work in frames of doors, windows, clerestory windows and other frames,

9.1 wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia

& length ( hold fast lugs or dash fastener shall be paid for separately).

9.1.1 Second class teak wood Cum 1,43,262.76 2 2,37,617

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-

decorative type, core of block board construction with frame of 1st class hard wood and well

matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on

both faces of shutters:

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws Sqm 2,397.89 64 1,52,578

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all

edges of flush door shutters (over all area of door shutter to be measured).

Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328

8.28 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed

8.28.1 Decorative veneer facings of approved manufacture Sqm 1,950.51 127 2,48,222

Providing and fixing wooden moulded beading to door and window frames with iron screws,

plugs and priming coat on unexposed surface etc. complete.

Extra for providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges

bright finished of required size with necessary screws. (Shutter area to be measured).

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than

9.100 grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary

screws etc. complete :

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic

9.101 coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and

shade, with necessary screws etc. complete.

9.101.1 Single rubber stopper each 39.69 35 1,389

Providing and fixing aluminium extruded section body tubular type universal hydraulic door

closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to

80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with

necessary accessories and screws etc. complete.

Abstract Civil Digitally signed by MAYANK

Providing and fixing partition upto ceiling height consisting of G.I. frame and required board,

including providing and fixing of frame work made of special section power pressed/ roll form

G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling

channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and

ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50

mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm

wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically

within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre

by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to

wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm

9.105 centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall

screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The

boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S.

fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be

provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat

head screws, including jointing and finishing to a flush finish with recommended jointing

compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and

two coats of primer suitable for board as per manufacture’s specification and direction of

engineer in charge all complete.

9.105.1 75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced Sqm 2,135.77 242 5,17,176

Providing and fixing Toilet cubical(of following standard dimension which includes 600mm

door size width) made up of thermosetting resign treated high pressure ,self supporting

decorative compact laminates with permanently incorporate anti-bacterial agents(under JIS

Z2801:2000 certification) during manufacturing .Compact board should be resistance to water

MR -1 immersion through permissible increase on thickness and mass <0.60% and board density Nos 38,517.47 7 2,69,622.30

>1.35kg/cm3 and fulfilled the criteria of green guard gold certification and manufactured

under EN438-2&3:2005 standard. 12mm thick compact board should be Moisture resistant,

Impact resistant, termite resistant ,Scratch resistant ,Weather and climatic shock resistant.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates

etc., including welding, grinding, buffing, polishing and making curvature (wherever required)

and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing

with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of

required size, on the top of the floor or the side of waist slab with suitable arrangement as per

approval of Engineer-incharge, (for payment purpose only weight of stainless steel members

shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc.

21.3 with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the

directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic

21.3.3 With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) Sqm 1,689.09 54 91,211

TOTAL WOOD & PVC WORK 19,97,241 2,69,622.30

SH-8 11 FLOORING WORK

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished

11.3 with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing

of steps etc. complete.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate Sqm 615.55 114 70,338

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey

cement slurry mixed with pigment to match the shade of the slab, including rubbing and

polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm

(average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement

slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved

brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1

cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the

joints with white cement and matching pigments etc. The tiles must be cut with the zero

chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge,

clips of required thickness, leveling system and rubber mallet for placing the tiles gently and

11.41A.3.1 Glazed Vitrified tiles Matt/Antiskid finish of size 600X600mm Sqm 1,728.18 1,283 22,16,663

Providing and laying flamed finish Granite stone flooring in required design and patterns, in

linear as well as curvilinear portions of the building all complete as per the architectural

drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4

11.55 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement

slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all

complete as specified and as directed by the Engineer-in-Charge.

Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Abstract Civil Digitally signed by MAYANK

Providing and laying Polished Granite stone flooring in required design and patterns, in linear

as well as curvilinear portions of the building all complete as per the architectural drawings

with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement :

11.56 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry

admixed with pigment of matching shade including rubbing, curing and polishing etc. all

complete as specified and as directed by the Engineer-in-Charge.

11.56.2 Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red Sqm 3,077.78 45 1,37,967

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved

brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1

11.41A cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the

joints with white cement and matching pigments etc. The tiles must be cut with the zero

chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge,

clips of required thickness, leveling system and rubber mallet for placing the tiles gently and

11.41A.3.1 Glazed Vitrified tiles Matt/Antiskid finish of size 600X600mm Sqm 1,468.06 1,283 18,83,019

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer),

with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all

colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1

cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the

joint with white cement & matching pigments etc. complete.

Providing & fixing in position Phenol bonded Bamboowood flooring with planks of sizes 14mm

thick, minimum 1800mm length and minimum 100 mm wide, in approved colour, texture and

finish, having Performance Appraisal Certificate (PAC) issued by Building Materials &

Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove

interlocking system, with underlayment of 4mm thick expanded polyethylene foam sheets

having density 40kg/cum, over prepared surface with necessary quarter round planks of size

1900mm x 18mm and door reducer of size 1900mm x 44mm, wherever required. The

bamboowood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000

Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge.

Grouting the joints of flooring/wall tiles having joints of 3 mm width, using epoxy grout mix of

11.48 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per

kg), including filling /grouting and finishing complete as per direction of Engineer-in-charge.

TOTAL FLOORING WORK 62,77,029 -

SH-9 12 ROOFING WORK

Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above

floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and

reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately):

12.31.1 Flat surfaces

Extra for sunk or raised mouldings in the plaster of Paris (Gypsum anhydrous) ceiling.

Providing and fixing false ceiling at all height including providing and fixing of frame work made

of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120

gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide

x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange

fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other

flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts &

bolts of required size and other end of angle hanger fixed with intermediate G.I. channels

45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling

section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips

of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I.

intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire

at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges

12.45 of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl

plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing

of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of

size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and

square edges of the board with recommended jointing compound , jointing tapes , finishing

with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats

of primer suitable for board, all as per manufacturer's specification and also including the cost

of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter

channels suitably fixed, all complete as per drawings, specification and direction of the

Engineer in Charge but excluding the cost of painting with :

Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 %

perforated area with perforation size and pattern as approved by the Engineerin-charge and as

per manufacturer's specification, with all 4 side tapered and backed by acoustical tissue with

NRC value not less than 0.60

Abstract Civil Digitally signed by MAYANK

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true

horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (

galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably

spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick

(minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made

of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center

to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size

24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the

1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and

12.52 laying false ceiling tiles of approved texture in the grid including, required cutting/making,

opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T"

runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed

to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with

galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center

along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with

polyester paint, all complete for all heights as per specifications, drawings and as directed by

Engineer-in-charge.

GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and

0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides

inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction

12.52.2 Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns Sqm 2,073.28 176 3,65,623

(minimum), including factory painted after bending and perforation, and backed with a black

Glass fiber acoustical fleece.

Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a

coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes

and finally with a piece of cloth lightly soaked in kerosene oil complete :

With residual type petroleum bitumen of grade VG -10 Sqm 133.44 455 60,716

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer

coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or

with G.I. limpet washers filled with white lead, including a coat of approved steel primer and

two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/

12.1 vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including

cutting to size and shape wherever required.

12.1.1 1.00 mm thick with zinc coating not less than 275 gm/m² Sqm 1,460.34 455 6,64,455

TOTAL ROOFING WORK 38,47,441 -

SH-10 13.0 FINISHING WORK

13.4 12 mm cement plaster of mix :

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to

prepare the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile

38.0 13.83 Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, -

including applying additional coats wherever required to achieve even shade and colour.

13.45 Finishing walls with textured exterior paint of required shade

New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of

exterior primer applied @ 2.20kg/10 sqm

With read mixed red oxide zinc chromate primer of approved brand and manufacture on steel

galvanised iron / steel works

Painting with synthetic enamel paint of approved brand and manufacture to give an even

TOTAL FINISHING WORK 15,62,562 -

SH-11 ALUMINIUM WORK,ALUMINIUM WORK - DOOR, WINDOWS & STEEL WORK

Providing and Fixing Glass Partition with12 MM thick Toughned Glass of approved make and all

Accessories including fixing on floor & wall as per the direction of Engineer-In-Charge

Providing & Fixing premium quality Manually operated Roller blinds with Solar protection

fabric of high tenacity Polyester Yarn with PVC Coating & Grey Backing, & offer 100% blackout

/ heat radiance. Fabric shall have Indoor Air Quality & Children & School Certified. Weight: 300

to 350 g/m2 (+/-5%), Thickness: 0.47 to 0.55 mm (+/-5%), Fabric Openness Factor: 0%, Tensile

Strength (Warp/Weft): 160/170 daN / 5cm, Tearing Strength (Warp/Weft): 11/13 daN, Solar

Transmission- 0%, Solar Reflectance 25-69%, Solar Absorption 28-31%, Fungistatic Treatment:

Degree 0, Excellent (EN ISO 846-A).

Abstract Civil Digitally signed by MAYANK

Providing and fixing Factory Made sensor based automatic sliding door of 1.8m X2.1 m with

openable portion of minimum 5'-0" with approved make or as suggested by architect with all

modern facilities as/specification .Unique Features: - Stainless Steel running track for rollers

- Concealed glass clamping with positive hold (Anti-sagging feature)

Other Accessories (Included in supply):

- 1no. Standard Motion Sensor

- 1no. Integrated Motion + Safety sensor

MR-4 - 1no. 3position program selector switch (AUTO/OPEN/CLOSE) Each 3,53,638.51 1 3,53,638.51

- 2nos. Standard Floor Guide - suitable for 10mm glass thickness

### Door Parameters:

Max Door Width: 1050mm (including all overlap) x 2panels,

Max Door Height: 2400m (clear passage height)

Max Door Weight: Upto 100Kgs (per door leaf)

Recommended Glass Thickness: 10mm

Suitable for Wall Surface/MS Beam/Glass mounting

Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand

and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic

floor spring type fixing arrangement and making necessary holes etc. for fixing required door

fittings, all complete as per direction of Engineer in charge (Door handle, lock and stopper etc.

to be paid separately)

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles

21.13 (best make of approved quality) for aluminium doors including necessary cutting and making Each 530.01 10 5,300

good etc. complete.

21.12 Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & Each 632.93 40 25,317

2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge

ALUMINIUM WINDOW -

Providing and fixing aluminium work for doors, windows, ventilators and partitions with

extruded built up standard tubular sections/ appropriate Z sections and other sections

of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of

required dia and size, including necessary filling up the gaps at junctions, i.e. at top,

bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium

sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever

required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.

brass / stainless steel screws, all complete as per architectural drawings and the

directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for

For fixed portion

Anodised aluminium (anodised transparent or dyed to required shade according to IS:

1868, Minimum anodic coating of grade AC 15)

Abstract Civil Digitally signed by MAYANK

For shutters of doors, windows & ventilators including providing and fixing hinges/

21.1.2 pivots and making provision for fixing of fittings wherever required including the cost of

EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Anodised aluminium (anodised transparent or dyed to required shade according to IS:

1868, Minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, window, ventilator shutters and

partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the

architectural drawings and the directions of engineer-in-charge . (Cost of aluminium

snap beading shall be paid in basic item):

21.3.3 With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) Sqm 1,689.09 102 1,72,044

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by

21.8 providing weather silicon sealant over backer rod of approved quality as per

architectural drawings and direction of Engineer-in-charge complete.

21.8.1 Upto 5mm depth and 5 mm width R.M 96.96 185 17,889

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses

etc., including cutting, hoisting, fixing in position and applying a priming coat of

approved steel primer, including welding and bolted with special shaped washers etc.

10.16.2 Hot finished seamless type tubes Kg 206.80 4,778 9,87,996

TOTAL ALUMINIUM WORK 15,47,248 9,82,388.26

SH-12 WATER PROOFING WORK

Providing an laying water proofing treatment in sunken portion of WCs, bathroom etc., by

applying cement slurry mixed with water proofing cement compound comsisting applying : (a)

First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound

@ 0.253 kg / sqm. This layer will be allowed to air cure for 4 hour.

22.5 (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement Sqm 618.39 100 61,839

compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hour followed with

water curing for 48 hours.

The rate includes preparation of surface, treament and sealing of all joints, corners, junctions

of pipe and masonry with polymer mixed slurry.

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry

mixed with water proofing cement compound consisting of applying:

after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water

proofing cement compound @ 0.253 kg/sqm.

laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of

fibre cloth should not be less than 10 cm.

third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with

water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will

(c) be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire Sqm 690.41 455 3,14,136

treatmentwill be taken upto 30 cm on parapet wall and tucked into groove in parapet all

TOTAL WATER PROOFING WORK 3,75,975

SH-13 DISMANTLING AND DEMOLISHING

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and

15.3 disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- Cum 3,559.03 6 20,820

Demolishing brick work manually/ by mechanical means including stacking of serviceable

15.7 material and disposal of unserviceable material within 50 metres lead as per direction of

Engineer-in-charge.

15.7.4 In cement mortar cum 2,064.71 25 51,618

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats,

architrave, holdfasts etc. complete and stacking within 50 metres lead :

15.12.1 15.12.1 Of area 3 sq. metres and below each 357.29 8 2,858

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking

within 50 metres lead :

15.13.2 Of area beyond 3 sq. metres each 189.31 7 1,325

15.18 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, kg 5.50 2,400 13,194

bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.

Dismantling steel work manually/ by mechanical means in built up sections without

15.19 dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge Kg 3.86 440 1,698

Dismantling tile work in floors and roofs laid in cement mortar including stacking material

within 50 metres lead.

15.23.1 For thickness of tiles 10 mm to 25 mm sqm 73.56 1,736 1,27,727

Abstract Civil Digitally signed by MAYANK

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material

within 50 metres lead of:

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking

15.44 out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres

lead as per direction of Engineer-in-charge :

15.44.1 15 mm to 40 mm nominal bore metre 150.13 60 9,008

Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes,

manually/ by mechanical means breaking lead caulked joints, melting of lead and making into

blocks including stacking of pipes & lead at site within 50 metre lead as per direction of

Engineer-in-charge:

15.45.1 Up to 150 mm diameter metre 333.13 20 6,663

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful

materials near the site and disposal of unserviceable materials within 50 metres lead.

15.54 Dismantling of spindle fire hydrant including stacking of useful materials within 50 metres lead. each 706.74 2 1,413

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling

15.57 including disposal of unserviceable material and stacking of serviceable material with in 50 sqm 56.47 2,003 1,13,123

meters lead as directed by Engineer-in-charge.

TOTAL DISMANTLING & DEMOLITION WORK 4,14,993 -

SH-14 REPAIRS TO BUILDING

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under,

including cutting the patch in proper shape, raking out joints and preparing and plastering the

14.1 surface of the walls complete, including disposal of rubbish to the dumping ground, all

complete as per direction of Engineer-in-Charge.

14.1.2 With cement mortar 1:4 (1cement: 4 coarse sand) sqm 561.73 250 1,40,432

Providing and laying SBR Polymer modified (of approved make @

minimum 2% by wt. of cement used) plain/reinforced concrete jacket

for the structural members e.g. columns, pillars, piers, beams etc with

concrete having the specified minimum characteristic compressive

strength [with ordinary portland cement, coarse sand and graded stone

aggregate of 10 mm maximum size in proportion as per design criteria]

with specified average thickness all-round existing core of RCC member.

Note: Rates shall be for finished surface area of concrete and shall

26.34 include the cost of making holes in existing RCC slab, if required, for

pouring concrete in shuttering mould of jacket and appropriate approved

Super-Plasticiser for rendering concrete as flowable self compacting and

SBR polymer but shall exclude cost of reinforcement, bond coat, Shear

Keys, centering and shuttering, strutting, propping etc (Payment under

this item shall be made only after proper wet curing has been done and

surface has been satisfactorily evaluated by sounding/tapping with a blunt

metal instrument)

50 mm thick in Grade M25 with cement content not less

than 330 kg per cum

75 mm thick in Grade M25 with cement content not less

than 330 kg per cum

TOTAL REPAIRS TO BUILDING 3,26,709 -

Abstract Civil Digitally signed by MAYANK

2.1 SUMMARY OF PLUMBING WORK - ADMIN BUILDING

S. No. Description DSR Amount MR Amount

1 SANITARY FIXTURES & FITTINGS 287154.8 253134.6

2 WATER SUPPLY (INTERNAL) 321727.24 138734.55

3 SEWERAGE & DRAINAGE NETWORK 26368.1 65193.4

GRAND TOTAL 1092312.661

GRAND TOTAL 1092312.661

Digitally signed by MAYANK

2.1 PLUMBING BOQ

Sno DSR Code Ref Item Unit Rate Qty DSR Amount Non-DSR Amount

PART-B PLUMBING WORKS

A. DSR 2023 SANITARY FIXTURES & FITTINGS

Providing and fixing white vitreous china pedestal type water closet (European type) with

seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with

fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard

1 17.3 make and mosquito proof coupling of approved municipal design complete, including

painting of fittings and brackets, cutting and making good the walls and floors wherever

required : W.C. an with ISI marked white solid lastic seat and lid

17.3.1 W.C. pan with ISI marked white solid plastic seat and lid Each 8024.13 10 80241.34

Providing and fixing Under counter with white glazed vitreous china wash basins with C.P.

brass eurometic self closing pillar tap with flow rate of 3.8 LPM complying to Green

Building, C.P. brass waste and unions and sealing of joints between wash basins and

counter slabs around the wash basins with Silicone rubber cement of approved make of

matching colour all complete including cutting and making good the walls and floors where

Each Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved

quality and colour.

Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality

& make and as per the direction of Engineer-in-charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings

Providing & fixing chrome plated brass battery based infrared sensor operated pillar cock,

having foam flow technology.

Supplying of Health Faucet, Material:Brass,Description:Health Faucet With Tube 1 Meter &

Hook,Finish:Chrome,Dimension (mm):29(L) X 80(W) X 140(H)

Providing of C.P 2 WAY BIB COCK with Wall Flange and all accessories as per approved

MR-3 specifications, Material: Brass,Mounted : Wall mounted,Series:Florid. Each 1542.15 10 15421.5

9 17.34 Providing and fixing toilet paper holder :

Providing and fixing mirror of superior glass (of approved quality) and of

10 17.32 required shape and size with plastic moulded frame of approved make and

shade with 6 mm thick hard board backing

17.32.2 Rectangular shape 453x357 mm Each 1364.78 10 13647.82

Providing and fixing P TMT towel rail complete with brackets fixed to

17.73 wooden cleats with CP brass screws with concealed fittings arrangement

of approved quality and colour.

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of

88 mm, weighing not less than 190 gms.

Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm,

18.65 height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms. Each 111.69 9 1005.25

Providing stainless steel coat hooks including cutting and making good the

walls,Range:Bathroom Accessories ,Material :SS 304,Descriptio:Robe Hook

Providing and fixing C.P. brass angle valve for basin mixer of approved quality conforming

5 inch Stainless Steel Glossy Finish Silver Round Plain Floor Drain Grating

5 inch Floor Trap Stainless Steel Glossy Finish Silver

Supplying of HI SPEED HAND DRYER Construction : Steel #304,Mounting : Wall Mounted,

Operation : Automatic, Hand Dry Time : 9S ,Auto Cutoff : 60 seconds, Noise Leve : 60-70db,

Motor : brush motor, Speed : 30000r/min, Voltage : 220-240V, Rated Power : 1000W,

Supplying of AUTO STEEL SOAP DISPENSER-STAINLESS STEEL GRADE #316-(MADE IN INDIA)

15 MR-8 Construction : Stainless Steel #316 Grade, Capacity : 1100 ML, Spray Amount : 2 ml, Sensing Each 5492.32 5 27461.6

Range : 8 cm, Battery : 4 x AA Duracell,

Providing and fixing of vitreous China Sanitary fixtures and CP fitting and other

accessories for Handicapped toilet . Each Matrix Set shall comprised (Wash Basin 650

MR-09 x 350 with one pair mounting brackets, EWC & Cistern complete with fittings & seat Each 10491.71 1 10491.7

cover, one no hinged rail 76 cm and five no's of grab rails 60 cm). complete all respec

Supplying of SWING HANDICAP GRAB BAR - S.STEEL Material : 18-8 S, Type-304,

MR-10 Stainless Steel, Operation : Movable (Horizontally & Vertically), Diameter : 32mm, Each 7400.44 1 7400.4

Digitally signed by MAYANK

upplying of Disabled S.STEEL GRAB RAIL – 600 MM,32MM DIA.Material : 18-8 S, Type-

304, Stainless Steel.

Supplying of Disabled S.STEEL GRAB RAIL – 450 MM,32MM DIA.Material : 18-8 S, Type-

304, Stainless Steel,

Providing and fixing white vitreous china flat back half stall urinal of size

580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard

size C.P. brass flush pipe,spreaders with unions and clamps (all in C.P. brass) with

waste fitting as per IS : 2556, C.I.trap with outlet grating and other couplings in C.P.

brass, including painting of fittings and cutting and making good the walls and floors

wherever required:

17.5.1 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern Each 12098.19 5 60490.94

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size

75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate

width with chase cutter and embedding the stone in the chase with epoxy grout or with

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal

size) as per direction of Engineer-in-charge and finished smooth.

8.10.2 Granite Stone of approved shade Each 4060.72 4 16242.89

B. WATER SUPPLY (INTERNAL)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply, including all CPVC plain & brass threaded fittings,

i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &

fittings with one step CPVC solvent cement and the cost of cutting chases and making

good the same including testing of joints complete as per direction of Engineer in

Concealed work, including cutting chases and making good the walls etc.

22.2 18.8.2 20 mm nominal outer dia Pipes Metre 538.78 55 29632.75

22.3 18.8.3 25 mm nominal outer dia Pipes Metre 628.62 30 18858.71

22.4 18.8.4 32 mm nominal outer dia Pipes Metre 740.92 38 28154.92

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply, including all CPVC plain & brass threaded fittings,

23 18.7 including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes

& fittings with one step CPVC solvent cement and testing of joints complete as per

direction of Engineer in Charge.

Internal work - Exposed on wall

23.1 18.7.2 20 mm dia nominal bore Metre 335.73 25 8393.34

23.2 18.7.3 25 mm dia nominal bore Metre 402.43 65 26157.91

23.3 18.7.4 32 mm dia nominal bore Metre 519.89 20 10397.72

23.4 18.7.5 40 mm dia nominal bore Metre 704.49 20 14089.79

23.5 18.7.6 50 mm dia nominal bore Metre 936.20 5 4680.98

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with

plastic floats complete :

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed

18.17.4 50mm nominal bore Each 1028.90 2 2057.80

Providing and fixing motorized valve including control wiring upto panel & ON/OFF

arrangement and all other accessories required to make the system complete

including control unit to be made of good quality PVC box, as per IP 65 with cable

gland also as per IP 65 and suitable for outdoor installation complete with suitable

wiring. This unit should be suitable to operate solenoid valve, float switch and

consisting of contactors, control transformer, MCB, Potential free contacts for BMS,

indicating lamp for automatic operation of filling OH tank with level to be mentioned

between 70% (low) to 100% (full)

26.1 MR-13 25mm nominal bore Each 14898.27 2 29796.5

26.2 MR-14 32mm nominal bore Each 16715.13 2 33430.3

Providing & fixing Auto Air vent for cold water supply risers, suitable for pressure not

less than 15 Kg/Sq.cm.

Water Level Indicator with Musical Alarm on Tank Full and Buzzer on Tank

Empty with 20 metres of Sensor Wire

Providing and placing on terrace (at all floor levels) polyethylene water storage tank,

IS : 12701 marked, with cover and suitable locking arrangement and making

necessary holes for inlet, outlet and overflow pipes but without fittings and the base

support for tank

Supplying & installation of approved make required capacity 3 phase,

50 Hz, 415V, centrifugal mono-block pump, with starter i/c single phase

preventer, connections, base channel foundation etc. as required as per

specifications but excluding pipe and connection cable.

SUB-HEAD-I: PLUMBING PUMP

Digitally signed by MAYANK

PUMPS - Raw Water, Water Supply Pumps

Note- All pumps to be provided with mechanical seal and wearing ring and mechaical seal.

Performance curve should be got approved before placing the order. (All pumps should be

supplied with base frame) (All level controller , water meter & Pumps shall be BMS

compatible. )(all pumps shall be supplied with vibration pad).

Providing & Fixing, testing and commissioning mono block pump, 3 Phase 440 volts/50

cycles per second with TEFC induction motor of the following capacity with mechanical

The pump shall be selected for performance at best efficiency point. However, the pump

selection shall be suitable for performance with set point @ + 20% of the rated head.

Domestic and Flushing water

Capacity: 150 LPM

Head : 35 Metre

HP -3 (Approx.) or as required.

Impeller:Bronze/ ss-316

Shaft : S/S 410

Mover : Electric Motor

Make: AS approved

MR-17 Quantity : 2 Nos. (1W+1SB) Set 47897.29 1 47792.6

INTERNAL DRAINAGE (SOIL, WASTE, VENT, RAIN WATER PIPES & FITTINGS)

Providing, jointing, testing and fixing UPVC Soil, Waste & Vent system conforming to IS

: 13592 (Type-B) and UPVC fittings (moulded as well as fabricated) like bends, tees, Y-

tees, crosses, boss connections, access pieces, saddle pieces, cleanouts, adaptors for

connections to other materials, plugs, reducers, cowls, offset and other specials.

Jointing shall be done with push fit EPDM ring jointing technique in general. Solvent

cement joints may be provided for fittings and specials which are not manufactured

with push fit rubber joints. Fixing at wall/ceiling level supported by galvanized steel

clamps & hangers etc. Making proper connection and also pipes may be laid / fixed in

sunken floors, under slung from ceiling. The pipes laid in sunken floor shall be encased

with not less than 75 mm thick cement concrete (1:2:4) all around. The installation

shall be complete in all respects including cutting chases / holes in walls, slabs and

making good the same as per specifications. (All major MS structure to hold the stack

is included in this item).

Providing, jointing, testing and fixing UPVC Rain water system conforming to IS :

13592 (Type -A) and UPVC fittings (moulded as well as fabricated) like bends, tees, Y-

tees, crosses, boss connections, access pieces, saddle pieces, cleanouts, adaptors for

connections to other materials, plugs, reducers, cowls, offset and other specials.

Jointing shall be done with push fit EPDM ring jointing technique in general. Solvent

cement joints may be provided for fittings and specials which are not manufactured

with push fit rubber joints. Fixing at wall/ceiling level supported by galvanized steel

clamps & hangers etc. Making proper connection and also pipes may be laid / fixed in

sunken floors, under slung from ceiling. The pipes laid in sunken floor shall be encased

with not less than 75 mm thick cement concrete (1:2:4) all around. The installation

shall be complete in all respects including cutting chases / holes in walls, slabs and

making good the same as per specifications. (All major MS structure to hold the stack

is included in this item).

Providing, fixing, jointing and testing UPVC soil, waste, vent pipework comprising

UPVC pipe conforming to IS :4985-1983 of class 3 (6kg/cm2) as specified below and

fittings (moulded as well as fabricated) like elbows, bends, reducers, threaded tail

pieces, caps, suitable elbow with suitable extension piece for drain point and other

specials jointing with cement solvent, chasing, cutting and making good the walls &

floors pipes laid in floors shall be encased with 40 mm thick concrete all around,

complete in all respects including testing of complete installation.(All major MS

structure to hold the stack with fixing including anchor fasteners, sand, cement etc is

included in this item)

30.1 MR-20 40 mm od 6 kg/cm2 (Class III ) Metre 167.21 40 6688.4

30.2 MR-21 50 mm od 6 kg/cm2 (Class III ) Metre 194.62 30 5838.6

30.3 MR-22 63 mm od 6 kg/cm2 (Class III ) Metre 239.48 20 4789.6

Providing and fixing UPVC/SWR trap (P trap) of self cleaning design as per IS:13592 :

1992 complete including cost of cutting and making good the cutouts in walls and

floors etc.including cutting and making good the walls and floors wherever required

31.1 MR-23 110 mm inlet and 110 mm outlet Nos. 174.42 11 1918.6

Providing and fixing floor drain made out of 110x63 mm OD uPVC elbow connected to

uPVC pipe complete as per direction of Project Manager.

Providing and fixing P.V.C. WC connector (straight or bend type) with rubber lip ring.

35 MR-25 Including 110 mm dia PVC pipe / bend of required length and proper connection with Nos. 138.08 11 1518.9

M seal to C.I. pipe complete as required.

Digitally signed by MAYANK

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand )

with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone

aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand

(zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick

19.7 with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat

cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4

graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement

complete as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610

19.7.1 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight

of cover 23 kg and weight of frame 15 kg) :

19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 12777.92 2 25555.85

Making connection of drain or sewer line with existing manhole including breaking into and

making good the walls, floors with cement cincrete 1:2:4 mix (1cement: 2 coarse sand : 4

graded stone aggregate 20mm nominal size) cement plastered on both sides with cement

mortar 1:3 (1cement : 3 coarse sand) finished with a floating coat of neat cement and

making necessary channels for the drain etc. complete for pipes 100 to 250mm dia.

19.21.1 For pipes 100 to 250 mm diameter each 812.22 1 812.22

Digitally signed by MAYANK

2.2 COST OF ELECTRICAL WORK

S. No. Description of item DSR Item Non-Schedule Item Total Amount

S. No. Description of item DSR Item Non-Schedule Item Total Amount

A MAIN LT PANEL - 1176634 1176634

B Distribution Boards 249910.1072 - 249910

D HOT DEEP GI CABLE TRAYS & GI RACEWAYS 252401.5515 - 252402

F. INTERNAL WIRING: 4401493.206 - 4401493

G. LIGHTING FIXTURE AND FANS 0 3968540 3968540

H UPS/Inverter System - 419497 419497

GRAND TOTAL 15307360

GRAND TOTAL 15307360

Digitally signed by MAYANK

Electrical summary Date: 2025.03.17 12:57:56 IST

2.2 Electrical BOQ

Sl No DSR Ref Description Unit QTY. Unit Rate Unit Rate DSR Amount Unit Rate NDSR Amount

DSR DSR Non DSR

A MAIN LT PANEL

SITC of MAIN LT PANEL (Indoor Type)

Supplying, installation, testing & commissioning of cubicall type LT panel suitable for 415 V, 3

Phase, 4 Wire 50 Hz AC supply system fabricated in compartmentalized design from CRCA sheet

steel of 2 mm thick for frame work and covers, 3 mm thick for gland, plates i/c cleaning & finishing

MR-1 complete with 7 tank process for powder coating in approved shade. as per technical

630A, 4P, Electrical Drawout, ACB with Trip Unit (LCD Dispaly

with Current Metering), Incomer - 1

2 Under Voltage Release(MN), 380/480V AC

3 MECH. I/L - LOCK & KEYLOCK (1K+1L) + M.KIT

400/5A, 15VA, CL-1.0, ID-80, OD-130X120, HT-40, Metering, Resin

Cast, Current Tansformer

5 Multifunction Meter

6 Aux. Contact Block TeSys, 2NO+2NC

7 10 mm Slide Link Disconnect Screw Clamp TB

8 Bus Bar Size 400 AMP

OUTGOING- 400A FP MCCB 25KA

Feeder Qty : (GROUND FLOOR, MEZZANINE Floor,FIRST FLOOR, SECOND FLOOR, , Iift panel) 5

outging 125 A FP MCCB 25KA 5

3 Feeder Qty: for HVAC 1

OUTGOING- 100 A FP MCCB 25KA

Feeder Qty : For UPS Supply 1

TOTAL CARRIED TO SUMMARY Set 1 1176634 1176634

B DISTRIBUTION BOARDS

2 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board,

240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din

2.3 bar, interconnections, powder painted including earthing etc. as required. (But without

MCB/RCCB/Isolator)

3 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus

2.4 bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But

without MCB/RCCB/Isolator)

Electrical BOQ Digitally signed by MAYANK

4 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus

2.5 bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But

without MCB/RCCB/Isolator)

5 Supplying and fixing 5 amps to 32 amps rating, 240 volts, 'C' series, miniature circuit breaker

2.1 suitable for inductive load of following poles in the existing MCB DB complete with connections,

testing and commissioning etc. as required.

6 Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual

2.14 current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete

with connections, testing and commissioning etc. as required.

Providing and fixing following rating and breaking capacity and pole MCB with thermomagnetic

release and terminal spreaders in

existing cubicle panel board including drilling holes in cubicle panel,

making connections, etc. as requred.

Supplying and fixing following rating, Double pole, 240 volts, isolator in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

7 Supplying fixing, 5 A to 32 A rating, 240/415 V 10kA , "C"

curve , miniature circuit breaker suitable for inductive

2.1 load of following poles inth existing MCB DB complete

with connection, testing and commissioning etc. as required.

7.1 2.10.5 Triple pole and neutral Each 1 1228 1230.69 1230.68932

8 Providing and fixing following rating and breaking capicity and pole MCCB with thermomagnetic

2.2 release and terminal spreaders in existing cubical panel board including drilling holes in cubicle

panel, making connections, etc as required.

TOTAL CARRIED TO SUMMARY 249910.1072

9 Supply of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100

volts grade, cross-sectional area as follows

Electrical BOQ Digitally signed by MAYANK

10 Laying and fixing of following sizes of one number PVC insulated and PVC sheathed/XLPE Power

cable of 1.1kv grade on cable tray as required.

10.1 MR 8 Upto 35 sq. mm(clamped with 1 mm thick saddle) Mtr 450 2535.55 1141000

10.2 MR 9 Above 50 sq. mm and upto 120 sq. mm (clamped with 25/40x3mm MS flat clamp) Mtr 110 2535.55 278911

11 Supplying and making end termination with brass compression gland and aluminium lugs for

MR following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV

grade as required.

TOTAL CARRIED TO SUMMARY 1689763

D HOT DEEP GI CABLE

12 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray

(galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in

4.6 convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders

including G.I. bolts & nuts, etc. as required.

12.1 4.6.2 150 mm width X 50 mm depth X 1.6 mm thickness Metre 150 716 717.57 107635.21

12.2 4.6.4 300 mm width X 50 mm depth X 1.6 mm thickness Metre 150 963 965.11 144766.35

TOTAL CARRIED TO SUMMARY 252401.55

13 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as

14 Providing & fixing of 25mm x 5mm GI strip on surface or recess for earth connection as required.

15 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. Meter 10 70 70.15 701.53

16 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick

including accessories, and providing enclosure With Cover

plate having bocking arrangement and watering pipe of 2.7 metre

Iona etc. with charcoal/ coke and salt as required. SET 6 7472 7488.36 44930.18

TOTAL CARRIED TO SUMMARY 169467

F INTERNAL WIRING:

17 Wiring for light point/ fan point/ exhaust fan point/ call bell point/normal switch with 1.5 sq.mm

FRLS PVC insulated copper conductor single core cable in surface / recessed FRLS PVC conduit,

1.1 with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS

PVC insulated copper conductor single core cable etc. as required.

Electrical BOQ Digitally signed by MAYANK

18 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core

1.5 cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper

conductor single core cable for loop earthing as required. meter 2400 433 433.95 1041475.848

19 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated

1.7 copper conductor, single core cable in surface/ recessed PVC FRLS conduit as required.

20 Supplying and fixing suitable size GI box with modular plate and cover in front on surface

or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A

1.31 modular switch, connections etc. as required.

21 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in

1.32 recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A

modular switch, connections etc. as required. Each 80 586 587.28 46982.7

TOTAL CARRIED TO SUMMARY 4401493.206

G LIGHTING FIXTURE AND FANS

22 Supply, Installation, testing and commissioning of following type Fluorescent/ Compact

fluorescent/LED light fixtures on wall/ Ceiling including all fixing accessories such as leads, etc

complete as required. The Fluorescent /CFL fixtures shall be complete with Low loss copper

ballast PF improvement capacitor, Bipin Rotor type lamp holder, starter, starter base, all pre wired

upto the terminal block. All fixtures shall be supplied with lamps.

23 10W Tiltable Light, LED COB Downlight 4K

10W COB LED with a neutral white color temperature of 4000K, providing a luminous output of 800-

900 lumens. The downlight is designed with a tiltable beam angle of up to 90°, allowing for

adjustable directional lighting. It operates on 220-240V AC and includes an integrated LED driver.

With a Color Rendering Index (CRI) of ≥80, it ensures accurate color representation. The fixture is

MR 16 constructed with an aluminum housing and a heat sink for efficient thermal management. It is

available in white or matte finish and comes with an IP20 rating for indoor use or IP44 for wet

locations. With a lifespan of over 50,000 hours, it is certified with CE, RoHS, and UL (or equivalent)

Electrical BOQ Digitally signed by MAYANK

24 15W COB Downlight 4K

high-performance lighting fixture featuring a 15W COB (Chip on Board) LED, providing a luminous

output of approximately 1200-1350 lumens with a neutral white color temperature of 4000K. It is

designed to offer a clear, bright light ideal for both residential and commercial spaces. The

downlight operates on a 220-240V AC supply and comes with an integrated LED driver for ease of

installation. With a Color Rendering Index (CRI) of ≥80, it ensures high-quality color reproduction.

MR 17 The fixture is built with an aluminum housing that includes a heat sink for efficient thermal

management, ensuring long-lasting performance. Available in white or matte finishes, the

downlight is rated IP20 for indoor use or IP44 for wet locations, making it versatile for various

environments. The downlight has a lifespan of over 50,000 hours and is certified with CE, RoHS, and

UL (or equivalent) standards

25 Supply of 28W COB Light 4K Lumens,LED is an energy-efficient lighting solution featuring a 28W

COB (Chip on Board) LED, providing a luminous output of approximately 2500-2800 lumens with a

neutral white color temperature of 4000K. This downlight offers high-quality illumination with a

Color Rendering Index (CRI) of ≥80, ensuring accurate color representation. It operates on a 220-

MR 18 240V AC supply and includes an integrated LED driver for ease of installation. Constructed with an

aluminum housing and heat sink, the fixture ensures optimal heat dissipation and longevity. With a

lifespan of over 50,000 hours, it is ideal for indoor applications and is available in IP20 (indoor) or

IP44 (wet location) ratings.

26 SITC of 10W Recesses Panel Light 4Kwith LED having pressure die cast aluminium hang body

having high efficiency diffuser with more than 85% transmittance with rated life of L-70 @50000 hrs

having system lumen output better than 1800 lumens and efficacy better than 120 lumen/

MR 19 watt(fixture design for meeting LG-7 Guideline) with CRI>80, Reverse Polarity and Surge Protection

upto 3 kV & Driver efficiency> 90%,PF>0.98,THD<5% (Driver compliance IEC 62384,IEC 61547,IEC

61347-2-13,EMI-CISPR15) etc.

27 15W Recesses Panel Light 4K with LED having pressure die cast aluminium hang body having high

efficiency diffuser with more than 85% transmittance with rated life of L-70 @50000 hrs having

system lumen output better than 1800 lumens and efficacy better than 120 lumen/ watt(fixture

MR 20 design for meeting LG-7 Guideline) with CRI>80, Reverse Polarity and Surge Protection upto 3 kV &

Driver efficiency> 90%,PF>0.98,THD<5% (Driver compliance IEC 62384,IEC 61547,IEC 61347-2-13,EMI-

SITC of LED Strip light 5w per meter with driver

5W per meter, it offers a luminous output of approximately 400-500 lumens per meter, depending

on the LED type and color temperature, available in options such as 3000K, 4000K, and 6000K. The

strip operates on a 12V DC or 24V DC power supply and comes with a compatible LED driver. It

features a flexible PCB with an adhesive backing for easy installation and can be cut at specified

intervals (e.g., every 3 LEDs) for customized lengths. With a lifespan of over 50,000 hours, the strip is

available in indoor (IP20) or waterproof (IP65) versions. Certified with CE, RoHS, and UL (or

equivalent), it provides reliable performance and comes with a warranty of 2 to 5 years.

TOTAL CARRIED TO SUMMARY 0 3968540

Electrical BOQ Digitally signed by MAYANK

H UPS/Inverter System

SITC of double conversion true online UPS system, 25 KVA, 400 v , 50 HZ , input 3 phase, output 3 phase

with inbuilt isolation transformer

sealed maintenance free, 42 AH , 30 Nos. *12 v batteries , inculding battery interconnection link sets,

battery rack for battries with 30 minute backup

TOTAL CARRIED TO SUMMARY 419497

29 Design, manufacture, Supply, Installation, Testing & commissioning of 250 KVA SILENT TYPE D.G. SET

Factory assembled and tested, Multi-cylinder, inline, 4 stroke cycle, water cooled, battery started, Silent Type Diesel Engine-

Alternator set capable of generating power at full load of 250 KVA (at site conditions) at 0.8 power factor, 415 Volts, 3 phase, 50

Hz, AC, along with engine control panel as well as electrical control panel, Auto Mains Failure (AMF) Panel, sound proof acoustic

enclosure, common base frame, standard fittings and accessories complete in all respects, broadly, comprising the following

Diesel engine capable of delivering suitable BHP at 1500 RPM under NTP conditions, vertical, totally enclosed, 12 volts DC

i) electric start arrangement compression ignition, Full Authority Electronic Engine ,silencers, 4 stroke- multi

cylinder, design to run continuously conforming to IS-10002, BS-5514, ISO-3046 standards complete with all fittings &

accessories comprising the following:

Engine should fitted with following accessories: A1 class governor, Battery Charging Alternator, Engine safety

sensors, air cleaner, lube oil filter & fuel filler.

Alternator 3 Phase, 415V, 0.85 PF, screen protected, revolving field, self-excited, self regulated through an AVR.

Alternator should have following features: 'H' Class insulation, Plus/Minus1.0% voltage regulation (max) in static

conditions, IP-23 protection with insulation class H, permissible overload of 10% for one hour in 12 hours of

iv) Battery charging alternator

Control panel: It is of 1.6/2mm thick CRCA sheet and is powder coated for a weather proof and long lasting finish.

The control panel consists of microprocessor based electronic controller, MCCB of suitable rating, key switch, push

button(starter), LED: Battery charging alternator fail indication, current transformer, instrument fuses. The

microprocessor electronic controller displays the following parameters: Voltage, frequency, rpm, current, cumulative

v) run hours, oil pressure, coolant temperature & charging current (DC Amp meter). The microprocessor electronic

controller provides following safety to engine: Under & Over Voltage, Under & Over frequency, Under & over speed,

overload, Low lube oil pressure, High coolant temperature and emergency off.

The DG Set should be capable of voltage buildup within 15 to 20 seconds after receiving start command and it

vi) should be ready to take first step load within 15 to 20 seconds after receiving start command on voltage buildup

Essential accessories: Fuel tank: Sub base fuel tank ( Draw In Type) of MS Sheet of adequate capacity (as per

CPWD Latest norms for DG SET). Base Rail: Base rail of adequate size is provided. Batteries: For Electrical control

unit 1 no. 12 Volts, adequate AH of battery (as per CPWD Latest norms for DG SET) of approved make battery for

electrical starting of DG Set.

viii) Exhaust after-treatment and in-cylinder solution to meet stringent emission norms.

Supply and installation of exhaust pipe of upto 25 metre- supply and fixing of suitable size of MS pipe( as per OEM

standards and latest norms) for fume exhaust with suitable supporting arrangement at suitabkle distance all along the

full length from generator upto 25 metre including cutting, jointing, welding mineral wool with aluminium cladding and

ix) all other accessories like flanges flexible coupling bends nut and bolts, canopy and making masonary opening in the

wall for exhaust ppes and finishing the same as required

Electrical BOQ Digitally signed by MAYANK

SCHEDULE OF QUANTITIES FOR SUPPLYING, INSTALLATION, TESTING & COMMISSIONING

OF STRUCTURE CABLING, IP-PBX, LAN, AND CCTV SYSTEM

S. No. Description MR Amount

1 SECTION - I- STRUCTURED CABLING SYSTEM PASSIVE 3,08,124.40

2 SECTION - II- IP-PBX SYSTEM 4,35,701.46

3 SECTION - III- LOCAL AREA NETWORK ( LAN ) 6,98,365.72

4 SUB-HEAD -IV- IP CCTV SYSTEM 26,42,236.65

GRAND TOTAL 40,84,428.24

GRAND TOTAL 40,84,428.24

Digitally signed by MAYANK

2.3 SCHEDULE OF QUANTITIES FOR SUPPLYING, INSTALLATION, TESTING & COMMISSIONING OF STRUCTURE CABLING, IP-PBX, LAN, AND CCTV SYSTEM

S. No Description of Item Unit Qty Rate(Rs.) Amount(Rs.)

SECTION - I- STRUCTURED CABLING SYSTEM PASSIVE

Supply, Installation, Testing & Commissioning of CAT 6A UTP LSZH Cable, 23 AWG solid copper conductors

in accordance to TIA/EIA 568 C.2 (Category 6a) & ISO/IEC 11801 2nd ed(Class Ea), UL Approved, tested

1 @500 Mhz, with HDPE insulation of individual conductor and over all Dia of 7.2 mm for Connectivity of Mtr 1759 93.54 1,64,513.88

Hub room to End Point.

Supply, Installation, Testing & Commissioning of CAT 6A UTP Universal (both tool & toolless) information

outlet (I/O) in accordance with ANSI TIA 568 C.2, IEC 60603-7-4 2nd Edition, ISO/IEC TR 11801-9901-2014,

2 ROHS Compliant. The I/O should have minimum 750 mating cycle and 200 insertion cycle and UL Nos. 44 569.88 25,074.85

approved,for Data, Voice, & Wi-Fi at user end.

Supply, Installation, Testing & Commissioning of loaded 24 port CAT 6A UTP, Transparent shutter jack

3 panel, 1U height, UL-94V-0, Black with cable support bar, clear label marks and earthing plug for CAT6A Nos. 2 15,956.72 31,913.45

cable termination at rack end.

Supply, Installation, Testing & Commissioning of CAT 6A UTP, LSZH Patch Cord as per ANSI/TIA/EIA

4 568C.2 and UL 94-V-0, ROHS Compliant, patch cord 1 Mtr for rack side switch to jack panel connectivity. Nos. 44 569.88 25,074.85

Supply, Installation, Testing & Commissioning of CAT 6A UTP, LSZH Patch Cord as per ANSI/TIA/EIA

5 568C.2 and UL 94-V-0, ROHS Compliant, patch cord 2 Mtr for rack side switch to end user connectivity. Nos. 44 621.69 27,354.38

Supply, Installation, Testing & Commissioning of 1, 2 and 4 port face plate, British Style with Shutter, 2

Plate system clear finish with transparent labelling, ABS-UL94-V2, ROHS Compliant, in accorandce with

6 standards like ANSI/TIA-568-C.2, ISO/IEC 11801:2002 AMMD.2:2010, YD/T 926.3-2009 & ISO/IEC 60603-7 Nos. 44 129.52 5,698.83

white for I/O fixing at user side.

Supply, Installation, Testing & Commissioning of 22 U floor mount rack with fans , 2 cable managers ,

7 satationary shelf , 2 Nos. of hardware pkts. Nos. 1 28,494.15 28,494.15

Digitally signed by MAYANK

SECTION - II- IP-PBX SYSTEM

Supply, Installation, Testing & Commissioning of Pure IP at core server Based voice solution with 04 Port

Voicemail ,04 Port FXS ,04 Port FXO ,1 PRI Trunk lines (30 Ch) Circuit with CLIP Facility ,14 IP users License

1 ,01 Nos. IP Operator Console, 100 Party Conference ,Speed Dial, Music on Hold , Internal/ External ring Set. 1 2,97,893.39 2,97,893.39

difference ,Call Barring, Call Pickup, TEC should be with GR Number, - Should Support Redundant server in

active-Active mode.

Supply, Installation, Testing & Commissioning of Type 1 IP Phone 1 VoIP account , Full duplex speaker

SECTION - III- LOCAL AREA NETWORK ( LAN )

Supply, Installation, Testing & Commissioning of access switch 24 x 1G and 6 x 1/10GSFP+ ports. PoE+

switch with min 370 Watt PoE+ budget .Should have RPS option from day 1. Should support 10 Gbps

Copper module on SFP+ port for flexibility to utilize. Switching capacity of 168 Gbps, forwarding

performance 124 Mpps, should have non-blocking architecture, 16K MAC address. Should have Static

1 Routing, RIP, VRRP, OSPF, OSPFv3, BGP,BGP4+,MPLS from day 1, Should support ISSU from day 1, Should Nos. 2 3,49,182.86 6,98,365.72

support stacking with min 14 members in a stack, Neighbour discovery, system logging, Telnet, SSH,

SNMP, Network Time Protocol (NTP), IPv6 features from day 1, MTBF Min 198000 Hr.

SUB-HEAD -IV- IP CCTV SYSTEM

Supply , Installation , Testing and commissioning of CAT 6 UTP cable 23 AWG LSZH as per ANSI/TIA 568

C.2 and ISO/ IEC 11801–2nd Edition, ROHS Compliant, solid copper conductors, tested @250 Mhz, with

1 HDPE insulation of individual conductor and over all Dia of 5.8mm for Connectivity of Hub room to End Mtr 1040 77.71 80,819.77

Supply, Installation, Testing & Commissioning of CAT 6 UTP Universal (both tool & toolless) information

outlet (I/O) in accordance with ANSI TIA 568 C.2, IEC 60603-7-4 2nd Edition, ISO/IEC TR 11801-9901-2014,

2 ROHS Compliant. The I/O should have minimum 750 mating cycle and 200 insertion cycle and UL Nos. 26 466.27 12,122.97

approved,for Camera at user end.

Supply, Installation, Testing & Commissioning of loaded 24 port CAT 6 UTP, Transparent shutter jack

3 panel, 1U height, UL-94V-0, Black with cable support bar, clear label marks and earthing plug for CAT6 Nos. 2 12,951.89 25,903.77

cable termination at rack end.

Supply, Installation, Testing & Commissioning of CAT 6 UTP, LSZH Patch Cord as per ANSI/TIA/EIA 568C.2

4 and UL 94-V-0, ROHS Compliant, patch cord 1 Mtr for rack side switch to jack panel connectivity. Nos. 26 466.27 12,122.97

Digitally signed by MAYANK

Supply, Installation, Testing & Commissioning of CAT 6 UTP, LSZH Patch Cord as per ANSI/TIA/EIA 568C.2

5 and UL 94-V-0, ROHS Compliant, patch cord 2 Mtr for rack side switch to end user connectivity. Nos. 26 492.17 12,796.46

Supply, Installation, Testing & Commissioning of 1, 2 and 4 port face plate, British Style with Shutter, 2

Plate system clear finish with transparent labelling, ABS-UL94-V2, ROHS Compliant, in accorandce with

6 standards like ANSI/TIA-568-C.2, ISO/IEC 11801:2002 AMMD.2:2010, YD/T 926.3-2009 & ISO/IEC 60603-7 Nos. 26 129.52 3,367.49

white for I/O fixing at user side.

Supply, installation, testing and commissioning of 5 MP Dome camera , ONVIF profile S , G& T ,BIS , CE ,

FCC Certified ,1/2.7” Progressive Scan CMOS ,2.7 mm to 13.5 mm motorized varifocal lens , Quad stream

with each stream support H.265 compression simultaneously ,min illumination : Color 0.05lux @

F1.2(AGC ON) ; B/W 0 lux @ IR ON , Shutter speed : 1 / 5s ~ 1 / 100,000 s ,WDR , Compression :

H.265/H.265+/H.264/H.264+ .SD card support upto 256GB , Alarm trigger - 1 input / 1 output , frame

7 rate : Main stream should support 25 fps@5MP ,Edge analytics : Customer Flow staistics, Cross COunt, Nos. 23 43,311.11 9,96,155.49

Heat Map, Human & Vehicle Detection, Pedestrian Intrusion Detection & Line cross Detection. Queue

length detection, Regional population statistics, SOD-Stationaary Object Detection. , In built IR LED , IR

Distance upto 45 meters , IP 66 ,IK10,POE.Audio -1 input/1 output

Supply, installation, testing and commissioning of 5 MP Bullet camera , ONVIF profile S ,G & T . BIS , CE ,

FCC Certified ,1/2.7” Progressive Scan CMOS ,2.7 mm to 13.5 mm motorized varifocal lens , Quad stream

with each stream support H.265 compression simultaneously ,min illumination : Color 0.05lux @

F1.2(AGC ON) ; B/W 0 lux @ IR ON , Shutter speed : 1 / 5s ~ 1 / 100,000 s ,WDR , Compression :

H.265/H.265+/H.264/H.264+/MJPEG .SD card support up to 256Gb, Alarm trigger - 1 input / 1 output ,

8 frame rate : Main stream should support 25 fps@5MP , Edge analytics : Customer Flow staisticsCross Nos. 3 44,709.91 1,34,129.74

Count, Heat Map, Human & Vehicle Detection, Pedestrian Intrusion Detection & Line cross Detection.

Queue length detection, Regional population statistics, SOD-Stationaary Object Detection. , IR Distance

upto 45 meters , IP 66 , POE. Audio -1 input/1 output

Digitally signed by MAYANK

Supply, installation, testing and commissioning of 32 channel NVR , ONVIF compliant , Certification

CE,FCC,UL,BIS, recording bandwidth 320 Mbps , output interface 1 HDMI (up to 4K), 1 VGA , Alarm in/out

:16ch in / 4ch out , 1 X RJ-45 port (1000M) , Bit Rate 16kbps-20mbps per channel, Sync Playback

4/8/10/16 ch playback, iOS smartphone support , 8 HDD support , each HDD slot support upto 8 TB HDD

, , 1x3.0 USB for backup /upgrade , 2x 2.0 USB for mouse, 1 E-Sata Port, Cloud Storage, Net HDD, Edge

9 analytics : Customer Flow staistics, Face Attendence, Face Detection and Recognition, Heat Map, Human 1 3,05,664.52 3,05,664.52

& Vehicle Detection, Pedestrian Intrusion Detection & Line cross Detection, Queue length detection,

Regional population statistics, SOD-Stationaary Object Detection, Deterrence, PIR, Video tampering, AI

Registerd Qty- 10000 & AI Captured Qty- 200000. Protocol support:- HTTp, TCP/IP, IPv4, UPNP,

RTSP,UDP,SMTP,NTP,DHCP,DNS,IP filter,PPPOE,DDNS,FTP,IP search, P2P, NFS/SMB/CIFS, ONVIF.

Supply, Installation, Testing & Commissioning of 8TB Surviellance Hard Disk.

Supply, Installation, Testing and Commissioning of Full HD 55" LED Professional Display Panel.

Supply, Installation, Testing & Commissioning of L2+ managed industrial PoE switch with

24*10/100/1000M RJ45 ports and 4*1/10G SFP+ fiber slot ports, Port 1-24 can support IEEE 802.3af/at

PoE standard, switching capaticy of 598 Gbps, forwarding performance 95.23 Mpps, maximum PoE

12 output power is 400W(at-600W), with 32K MAC address. Should have Static Routing , system logging, Nos. 2 3,39,443.04 6,78,886.08

Telnet, SSH2.0, SNMP V1/V2C/V3, Network Time Protocol (NTP), FTP, TFTP, Xmodem.

Supply, Installation, Testing and Commissioning of Workstation PC: Intel(R) Core(TM) i7-3770 Processor

(8M Cache, up to 3.90 GHz); RAM: 8GB (1x8GB) Non-ECC DDR3 1600MHz ; Keyboard: 12 function keys;

Chassis: Tower/Workstation; DVD: 8X Slimline DVD+/-RW, Data Only; Dual Graphics Card; Network

13 interface card: Integrated Intel(R) 82579LM Gigabit1 Ethernet LAN 10/100/1000; Hard disk: 250GB, 7200 Nos. 1 98,434.34 98,434.34

RPM 3.5" SATA 6Gb/s Hard Drive; Operating system: Windows 7 Professional 64 Bit or latest.

Digitally signed by MAYANK

2.4 Fire fighting & Fire alarm

Reff / DSR NDSR

S.N Description Unit Qty Rate

DSR-2022 Amount Amount

Supply Installation, testing & commissioning of 4 loop microprocessor based

intelligent and electronically addressable, modular, with networking card &

printer port- loops panel (expandable) with each loop capacity of 159 detectors.

Fire alarm control panel with 5.7 inch touch screen LCD display, multiple access

levels 10,000 event history logs in the nonvolatile memory (EEPROM). The panel

should be modular microprocessor based in nature and should be expandable

from single loop to up to 32 loops. The panel shall have 240V AC power supply,

automatic battery charger, 24 V, ceiled lead acid maintenance free batteries

sufficient for 24 hours back up Provision for integration to BMS back net software.

2 17.2.1.2 Four Loop Panel. Each 1 239749 239749

Supplying, installation, testing & commissioning of repeater panel wih 320

character/ Touch screen LCD display with inbuilt reset, acknowledge and silence 3 108926

3 17.2.3 switches complete as required. Details of cost for one each Each 326778

Supplying, installation, testing & commissioning of intelligent addressable thermal

detector with rate of rise cum fixed tempreature thermistor complete with base as 4 2732

4 17.2.9 required. Each 10928

Supplying, installation, testing & commissioning of intelligent analog addressable 31 2864

5 17.2.4 photothermal detector complete with mounting base complete as required. Each 88792

Supplying, installation, testing & commissioning response indicator on

surface/recess MS box having two LEDs metallic cover complete with all 31 277

6 17.2.5 connections etc. as required. Each 8575

Supplying, installation, testing & commissioning of addressable manual call point

7 17.2.14 complete as required. Each 62072

Supplying, installation, testing & commissioning of fault isolator complete with

8 17.2.7 base as required. Each 26217

Supplying, installation, testing & commissioning of addressable fire control module

9 17.2.10 complete as required. Each 24077

Digitally signed by MAYANK

Supply, Installation, Testing & Commissioning of Addressable Monitor

Module for Sprinklers, Panic Bars & other Third Party Inputs. The monitor

module shall monitor potential free contacts. The device shall have an LED which

shall blink in normal state & get steady on activation to monitor the heath

status of the device. Addressing shall be with user friendly rotary decimal

switches. Module shall be supplied with mounting plate from OEM for ease of

installation & maintenance.

Supplying & drawing of cable fire retardant pvc insulated copper conductor cable

in existing surface /recessed steel conduit of following pairs , cores and size

including connections and interconnections etc. as required speaker cable single

pair 2core 1.5 sqmm 43565

Supplying, installation, testing & commissioning of addressable horn cum strobe

12 17.2.15 complete as required. Nos. 28109

Supplying and installing following size of perforated painted with powder coating

M.S. cable trays with perforation not more than 17.5%, in convenient sections,

DSR-EL/2022/ joined with connectors, suspended from the ceiling with M.S. suspenders including

13 4.1 bolts& nuts, paintingsuspendersetcasrequired.

14 4.1.4 300 mm widthX 50 mm depthX 1.6mm thickness Metre 599600

15 FIRE FIGTING

16 18.1.9 Electric Driven Pump

Supplying, installation, testing and commissioning of Electric driven Main Fire

Pump suitable for automatic operation and consisting of following, complete in all

17 (a) respects, as required :

Horizontal type, multistage, centrifugal, split casing pump of cast iron

body & bronze impeller with stainless steel shaft, mechanical seal conforming

Suitable HP Squirrel cage induction motor, TEFC, synchronous speed

1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55

protection for enclosure, horizontal foot mounted type with Class-'F' insulation,

19 (c) conforming to IS-325.

Digitally signed by MAYANK

M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts

20 (d) etc. as required.

21 (e) Suitable cement concrete foundation duly plastered with anti vibration pads.

Providing, laying, testing & oommissioning of 'C' class heavy duty MS pipe

conforming to IS 3589/1S 1239 including Welding, fittings like elbows, tees,

flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with

suitable clamp/support frame and painting with two or more coats of synthetic

23 18.7 enamel paint of required shade complete as required

Supply,installation,testing &commissioning of one coat of 4 mm thick 'PYPKOTE' or

coatek anti rust pipe protection including approved primer as per manufatures 570 93 53,123

specifications and lap of 25 mm to make an impermeable layer on MS pipe in

25 MR-2 treches or on structure /masnoary complete including surface prepration. Metre

Providing, laying, testing & commissioning of 'B' class medium duty G.I. pipe

conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers,

nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable

clamp/support frame and painting with two or more coats of synthetic enamel

26 18.8 paint of required shade complete as required

Digitally signed by MAYANK

Painting G.I. pipes and fittings with synthetic enamel white paint with two coats

CPWD-DAR- over a ready mixed priming coat, both of approved quality for new work :

36 18.38.3 25 mm diameter pipe Metre 4547

37 18.38.4 32 mm diameter pipe Metre 4736

38 18.38.5 40 mm diameter pipe Metre 3334

39 18.38.6 50mm diameter pipe Metre 3424

40 MR-3 65 mm diameter pipe Metre

41 MR-4 80 mm diameter pipe Metre

42 MR-5 100 mm diameter pipe Metre

Supplying and fixing Single headed internal hydrant valve With instantaneous

Gunmetal/StainIess Steel coupling of 63 mm dia with cast iron wheel ISI marked

conforming to IS 5290 (Type -A) With blank Gunmetal/StainIess Steel cap and chain

43 18.9 as required ::

44 18.9.2 Single headed Stainless steel Each 4 6152 24610

Supplying and fixing Single headed external yard hydrant valve With 1 NO. 63 mm

dia instantaneous FM Gunmetal/StainIess Steel coupling and cast iron wheel, ISI

marked, conforming to IS 5290 (type A) With blank Gunmetal/Stainless Steel cap

45 18.10 and chain as required :

46 18.10.2 Single headed Stainless steel Each 1 6152 6152

Digitally signed by MAYANK

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and

female couplings duly bound with Gl wire, rivets etc. conforming to IS 636 (type-A)

47 as required

48 18.16.2 Stainless Steel (Grade 304) Each 8 4458 35662

Providing and fixing fire hose cabinet fabricated from 16 gauge M.S. Sheet with

single or double glazed front door (with 4 mm thick glass) and locking

arrangement, painted fire red with stove enamelled paint "FIRE HOSE" written on

front including necessary supports approximate size.

50 MR-6 2100x900 mm for Internal FHC Each 4 10310 41,239

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200

mm in height with air release valve on top and flanged connection to riser, drain

arrangement With 25 mm dia gun metal wheel valve With required accessories, 1 18284

pressure gauge and paintingwith synthetic enamel paint of approved shade as

51 18.20 required. Each 18284

Providing & fixing of pressure switch in M.S. pipe line including connection etc. as

52 18.22 required. Each 10846

Providing & fixing flow switch in following sizes M.S. pipe including

53 18.23 connection etc as required.

Providing & fixing dial type (100 mm) pressure gauge with isolation ball valve

suitable for working pressure of 250 PSI, short pieces, nipples, elbows, stainless

steel 'U' tube & ball valve, etc as required as per specifications.

Providing, fixing, testing & commissioning of installation control valve of cast iron

body, brass/bronze working parts comprising of water motor alarm, bronze seat

clapper, clapper arm and hydraulically driven mechanical gong bell to sound

continuous alarm when the wet riser/sprinkler system activates, pressure gauges,

emergency releases, strainer, pressure switch, cock valve complete with drain

valve and bypass, test control box, ball valves, MS pipe of required size, flanges,

orifice plate, gasket etc of follwing sizes as required:

Digitally signed by MAYANK

Supplying, installation, testing & commissioning of sprinkler flexiblepipe (UL Listed)

of stainless steel complete with 15 NPT on reducer thread with maximum working

pressure Of 175 PSI test pressure Of 875 PSI (Burst) With branch line (Inlet) 25mm

NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer,

nipple, 2 side brackets, center bracket, stockbar of following sizes complete as

Providing, installation, testing & commissioning of adjustable rosette plate for

15mm dia in white finish UL Listed or FM approved complete as required. 135 225

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6

rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts,

washers, gaskets conforming to IS 13095 of following sizes as required :

Providing and fixing inspectors test assembly complete with test valve, sight glass

sectional drain valve, union with corrosion resistant orifice all complete as per 1 8238 8,238

64 MR-8 drawing and as per specifications. Each

Supplying, fixing, testing & commissioning of double flanged sluice valve of rating

PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with

nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as

65 18.12 required :

Supplying and fixing orifice plate made out Of 6 mm thick stainless steel

(Grade 304) with orifice of required size to be fitted between flange & landing 4 1324

valve of external and internal hydrants to reduce pressure at the outlet tothe level

67 18.13 of 3.5 kg/cm2 complete as required. Each 5296

Digitally signed by MAYANK

Providing, installation, testing and commissioning of non-return valve of

following sizes confirming to IS: 5312 complete with rubber gasket, Gl bolts, nuts,

68 18.14 washers etc.as required :

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post

71 18.17 office

20 mm red, conforming

nominal to dia

internal IS 884 complete

water with the following

hose thermoplastic asreinforced)

(Textile required. type -2

as per IS: 12585

73 (b) 20 mm nominal internal dia gun metal globe valve & nozzle.

74 (c) Drum and brackets for fixing the equipmets on wall.

Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe

75 (d) and socket.

Supplying and fixing of fire brigade connection of cast iron body with gun metal

male instantaneous inlet couplings complete with cap and chain as reqd. for

77 18.19 suitable dia MS pipe connection conforming to IS 904 as required:

78 18.19.1 2 way-100 mm diaM.S. Pipe Each 1 6757 6757

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type

79 18.21 sprinklers of rating 68 degree centigrade with required accessories :

80 18.21.1 Pendent Sprinkler Each 135 523 70624

Supplying & fixing 63 mm dia gun metal short branch pipe With 20 mm nominal

internal diameter size nozzle conforming to IS 903 suitable for instantaneous

81 18.18 connection to interconnect hose pipe coupling as required:

82 18.18.2 Stainless Steel (Grade 304) Each 4 1666 6663

Providing, installation, testing and commissioning of stainless steel Y-

strainer fabricated out Of 1.6 mm thick stainless Steel, Grade 304, sheet

83 18.15 With 3 mm dia holes with stainless steel flange.

Digitally signed by MAYANK

DSR-2022 Providing and fixing in position the industrial type pressure gauges with gun metal/

85 /16.8 brass valves complete as required Each 1199

Providing and fixing resilient rubber neoprene lined single vibration elimination

connection with unit control suitable for raw water upto 45 deg.C. temperature

86 working pressure 20 kg/Sq.Cm.

Providing and fixing standard firemans axe with heavy insulated rubber handle

89 MR-11 tested for 20000 watts Nos

Providing and fixing,testing and commissioning of expansion Bellow,Material

90 Rubber and GI Flange,Thread Size As per customers requirement

93 MR-14 Air vent valve,Materieal: brass,PN-16,Rough Brass Each 2 523 1,046

97 Electric Panel For Pump

Fabrication, supply, Insallation testing& commissioning of Electrical

controlpanelofcubicalconstruction,floormounted type,fabricatedout

of2mm thick CRCA sheet,compartmentalised with hinged lockable

doors,dust and verm in proof,powdercoated of approved shade after7

tank treatment process,cable alley,inter-connection with suitable size

copper conductor cable/solid copper strip, having switchgears and

accessories, mountings and internal wiring, earth terminals,

numberingetc. complete in all respect, suitableformainfire pump,

pressurisation pump& diesel pumpsetcomplete as perCPWD

specification with following in coming and Outgoings, suitable for

operationon415V,3 phase,50HzAcSupplywithenclosureprotection

98 classIP42asrequired

Digitally signed by MAYANK

63A,50kA4 PoleMCCB,Ics=100%Icurating Digital Voltmeter0-500Vwith selector

switch Digita lAmmete r(0-250A) with selector swtich& CTs etc. LED type RYB

100 phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper BusBar 300A

(Note: All outgoing feeders for pumps should have digital Ammeter with selector

102 switches, and LED type ON, OFF, trip indicating lamps)

103 MAIN FIRE PUMP

25A,50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable

for 60 HP pump with over load protection,current sensing type single phase

preventor complete with all acceessories and internal wiring required for

104 automatic operation, selecto rswitch for local/remote,auto/manual/OFFoperation.

105 SYSTEM CONTROLLER

Designing, Supply, Installation, Testing and commissioning of system controller to

control operation of main electric fire pump, diesel pump, Pressurization 1 144910 1,44,910

pump,Terracepumpin sequence as perspecification consisting ofrelays, timers.

106 MR-17 Sensors,annunciation window for fault indication,complete as per specification Set

Providing and fixing of carbon-di-oxide type fire extinguishers consisting of welded

M.S. cylinderical body, squeeze lever discharge valve fitted with pressure

indicating guase ingernal discharge tube 30 cms long high pressure discharge hose,

discharge nozzle, suspension bracket conforming ro IS:15683 finished externally

with re enamel paint and fixed to wall with brackets complete with internal

Providing and fixing ABC Powder type fire extinguishers consisting of welded M.S.

cylinderical body, squeeze lever discharge valve fitted with pressure indicating

guase internal discharge tube 30 cms long high pressure discharge hose, discharge

nozzle, suspension bracket conforming to IS:15683 finished externally with re

enamel paint and fixed to wall with brackets complete with inernal charge.

Digitally signed by MAYANK

Providing and fixing of ISI marked (IS: 940) portable chemical fire extinguisher,

water (gas pressure) type capacity 9 litres with gun metal cap and nozzle and

complete in all respects including initial fill and wall suspension brackets as

111 required as oer soecifications.

Total Amount 3860772

Total Amount 3860772

Digitally signed by MAYANK

SN DSR/MR Description Of Equipments / Materials Unit Qty. Rate Rate DSR-Amount NDSR-Amount

SECTION-1 (HVAC EQUIPMENT)

VRF AC EQUIPMENT

1) Variable Refrigerant Flow Air-conditioning System

SITC, of Variable Refrigerant Flow modular type airconditioning system

with complete with indoor and outdoor units, individual remote controller

and centralized controller, interconnected refrigerant piping, full charge

of refrigerant gas , control cabling etc. as per detail given in specifications

and having following items. The prices to be given in Indian rupees

including all taxes and duties and delivered at site. Refrigerant to be used

shall be - R 410 A only.etc as per specification complete as required.

1.1 Outdoor Unit

Supply Installation,Testing & Commissioning of modular type Variable

Refrigerant Flow/Variable Refrigerant Volume aircooled Outdoorunits

suitable for cooling and heating, having all hermetically sealed inverter

type Scroll Compressor(s), microprocessor based Controller,top discharge

type condensing unit(s),with R410 A Refrigerant, vibration isolators, with

suitable foundation etc. complete asrequired. The unit shall deliver the

rated capacity at ARI 550 Conditions and work even at 52°C ambient

temperatur without tripping. The unit shall be suitable to work on 400V+/-

10%,3Phase,50Hz AC power supply.The unit shall be filled with first charge

of the refrigerant and ready for use as required. The COP & EER at ARI 550

conditions shall not be less than 4.5 & 6.7 respectively in cooling mode .

a) MR-1 46 HP Cool / Heat Pump Unit Nos. 1 1135517 1135517

b) MR-2 52 HP Cool / Heat Pump Unit Nos. 1 1273945 1273945

c) MR-3 54 HP Cool / Heat Pump Unit Nos. 1 1299986 1299986

d) MR-4 60 HP Cool / Heat Pump Unit Nos. 1 1312321 1312321

1.2 Indoor Units

i) Round Flow/ 4 Way Cassette/1 Way/High Wall/ Tower Type Indoor Units

Supply,installation,testingandcommissioningoffollowingminimumcapacityV

RV/VRFHighwalltypeIndoorunitequippedwithwashablesyntheticmediapre-

filter,fansectionwithlownoisefan/dynamicallybalancedblower,multispeedm

otor,coilsectionwithDXcoppercoil,electronicexpansionvalve,

outercabinet,cordlessremotecontrol,drainpan,necessaryaccessoriesetc.,sui

tableforoperationon230V±10%,50Hz,singlephaseACsupply,completeasrequ

Theunitshallhaveautomaticforceshutdownprovisionincaseoffireonreceiving

signalfromBMSSystem.Thecoolingcapacityofindoorunitwillbeatairinletcond

itionsof27Degree C DB and 19 Degree C WB temperature.

a) DSR&AOR- 2019/3.3 1.0 TR 1 way (Wall Mounted) Nos. 3 19,700 22293 66,877.50

b) DSR&AOR-2019/3.6 1.65 TR 1 way (Wall Mounted) Nos. 3 21,746 24608 73,823.26

d) DSR&AOR-2019/3.7 2.0 TR High Wall Type Indoor Unit Nos. 3 22,100 25008 75,025.01

Digitally signed by MAYANK

Supply, installation, testing and commissioning of following minimum

capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit

equipped withsynthetic washable media pre-filter, fan section with low

noise fan/dynamically balanced blower, multispeed motor, coil section

with DX Copper coil, electronicexpansion valve, outer cabinet, drain pump,

grill, necessary supports, vibration isolation, cord less remote control etc.,

suitable for operation on single phase 230 V ± 10%, 50Hz AC supply,

complete, as required. The unit shall have automaticforce shut down

provision in case of fire on receiving signal from BMS System.

The cooling capacity of indoor unit will be at air inlet conditions of 27

and 19 Degree C WB temperature.

c) DSR&AOR-2019/2.4 1.6 TR/1.59 TR Round /4 way Cassette Type Indoor Unit Nos. 1 30,204 34179 34,178.82

f) DSR&AOR-2019/2.10 4.0 TR Round/4 Way Cassette Type Indoor Unit Nos. 32 33,981 38453 12,30,491.70

g) MR-5 4.0 TR Floor Mounted Tower Type Indoor Unit Nos. 5 72542 362708

Supply, installation, testing and commissioning of following minimum

capacity and external static pressure VRF/VRV ceiling mounted ductable

type Indoor unequipped with washable synthetic media pre-filter, fan

section with low noise fan/dynamically balanced blower, multispeed

motor, coil section with DX copper coil, electronic expansion valve, corded

remote control, outer cabinet, vibration isolators, drain pan, other

necessary supports etc., suitable for operation on single phase AC supply

230 V ± 10%, 50 Hz complete as required. The unit shall have an automatic

force shut down provision in case of fire on receiveing signal from BMS

System. The cooling capacity of indoor unit will be at air inlet conditions on

27 Degree C DB and 19 Degree C WB temperature.

h) DSR&AOR-2019/4.16 4.0 TR Medium Static duct Type Indoor Unit Nos. 3 48,731 55144 1,65,431.85

4.0 Refrigerant Piping for VRV / VRF System

Supply, Installation, testing and commissioning includin vaccumiazation

and Nitrogen testing Of following nominal sizes o soft/hard drawn copper

refrigerant piping for VRV/VRF system complete with fittings, with suitable

adjustable ring type hange supports, jointing/brazing including accessories,

DSR&AOR-2019/5.0

insulated with XPL Class-O tubular insulation/with Class-O closed cell

elastometri nitrile rubber tubular sleeves sections Of specified thickness as

give below for Suction and Liquid lines, all accessories as pe specifications

etc. as required :

a) 5.12 41.27 mm O.D. (Min. Wall Thickness - 1.62 mm)19 mm thick insulation Rmt. 85 1,309 1481 1,25,907.36

b) 5.10 34.9 mm O.D. (Min. Wall Thickness - 1.62 mm)19mm thick insulation Rmt. 250 1,230 1392 3,47,966.69

c) 5.8 28.58 mm O.D. (Min. Wall Thickness - 1.2 mm)19mm thick insulation Rmt. 35 1,108 1254 43,883.41

c) 5.6 22.2 mm O.D. (Min. Wall Thickness - 1.2 mm)19mm thick insulation Rmt. 35 865 979 34,259.16

d) 5.5 19 mm O.D. (Min. Wall Thickness - 1.2 mm)19mm thick insulation Rmt. 335 707 800 2,68,013.57

e) 5.4 15.86 mm O.D. (Min. Wall Thickness - 1.2 mm)19mm thick insulation Rmt. 35 588 665 23,288.31

f) 5.3 12.7 mm O.D. (Min. Wall Thickness - 1.2 mm)19 mm thick insulation Rmt. 40 466 527 21,093.01

g) 5.2 9.50 mm O.D. (Min. Wall Thickness - 1.2 mm)19 mm thick insulation Rmt. 36 331 375 13,484.13

h) 5.1 6.35 mm O.D. (Min. Wall Thickness - 1.2 mm)19.0mm thick insulation Rmt. 29 245 277 8,040.01

Y-joints For Indoor Unit

Supply, Installation, Testing & Commissioning of Y-joints ( Suction +

Liquid = complete set) for Indoor Unit of sizes as required to suit

various capacity of Indoor Unit as specified above etc as per

specification complete as required. 275142

Digitally signed by MAYANK

Main Intelligent Touch Screen Type Central Controller

Supply, Installation, Testing & Commissioning of Central Controller of

digital type of latest generation suitable for all VRV /VRF equipments to

MR-7 Operate, Monitor, Shceduling Programme, On / Off, Temperature Setting Nos. 1 92611

etc as per specification complete as required to operate all the indoor

units.etc as required. 92611

5.0 Condensate Drain Piping

Supply, Installation, Testing and Commissioning of PVC drain piping, 6 Kg

pressure rating complete with fittings, supports as per specifications and

insulated with Factory laminated fire retardent grade GC faced closed

cell nitrile rubber insulation with density 40-55 Kg/ Cum. including with

Chase cutting and repairing as per specifications and drawings etc

complete as required.

a) MR-8 25 mm dia pipe Rmt. 175 143 24944

b) MR-9 32 mm dia pipe Rmt. 50 166 8292

Wiring for circuit/ submain wiring alongwith earth wire with the

following sizes of FRLS PVC insulated conductor, single

core cable in surface/ recessed medium class PVC conduit as

Supplying and installing following size of perforated painted with powder

coating MS. cable trays with perforation not more than 17.5%, in

convenient sections, joined With connectors, from the æiling With M.S.

suspenders including & nuts, painting suspenders etc as required.

a) 4.1.2 150 mm Width X 50 mm depth X I .6 mm thickness Rmt 50 604 683 34,174.29

b) 4.1.4 300 mm width X 50 mm depth X I .6 mm thickness Rmt 100 777 879 87,925.24

8.0 MR-10 SITC of ODU stands (Floor Mounted Type) Nos. 4 21861 87442

9.0 MR-11 SITC of Inline fans for Toilet Exhaust Nos. 6 17475 104849

10.0 MR-12 SITC of 24 G GI Cowl Duct Nos. 8 18023 144184

Supply, installation, balancing and commissioning of factory fabricated GSS

sheet metal rectangular/round ducting complete with neoprene rubber

gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per

approved drawings and specifications of following sheet thickness

complete as required. Note- Quantity may vary as per final rcp plans.

Digitally signed by MAYANK

Supply, installation, testing and commissioning of GI volume control duct

damper complete with neoprene rubber gaskets, nuts, bolts, screws

linkages, flanges etc, as per specifications.

Supplying & fixing of powder coated extruded aluminium Supply Air Grills

i with aluminium volume control dampers as per specifications. Sqm 10 9105 9125 91,249.40

Supplying & fixing of powder coated extruded aluminium Return Air Grills

ii with louvers but without volume control dampers complete as required. Sqm 12 5910 5923 71,075.31

Supplying, fixing testing commissioning of Supply air diffusers of powder

14.0 coated aluminium with aluminium volume control dampers with anti Sqm 10 12184 12211 1,22,106.83

16.17 smudge ring & removable core.

Supplying, fixing testing commissioning of Return air diffusers of powder

coated aluminium without volume control dampers with anti smudge ring Sqm 8 8121 8139 65,110.28

16.18 & removable core.

15.0 Canvass Connection

Supply, Installation,testing of fire retardant flexible canvass connection.

16.0 Thermal Insulation:

Supplying and fixing Of following thickness duly laminated aluminum foil of

mat finish closed cell Nitrile rubber (Class insulation on existing duct after

applying suitable adhesive for Nitrile rubber. The joints shall be sealed with

50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation

complete as per specifications and as required. above. Valves should have

pressure rating Of 25 Barminimum..

16.23.1 19 mm thick insulation Supply Duct Sqm 120 754 756 90,678.15

17.0 Acoustic Lining of Ducts

Supplying, fixing acoustic lining on wall and ceiling of AHU rooms with

50mm thick, density 32 kg/cu.m resin bonded glass fiber insulation friction

fixed in 610mm x 610 mm frame work made of 25X50X50X50X25 mm

made out of 0.6mm thick Gl sheet IJ shaped channel and covered with

reinforced fiber glass tissue and finished with 0.80 mm perforated

aluminium sheet etc. complete as required and as oer soecifications..

18.0 MR-14 Charging of Extra refrigerant at site KG 190 260 49478

TOTAL AMOUNT 3322154 6210479

TOTAL AMOUNT 3322154 6210479

Digitally signed by MAYANK

S.No Item Area of Building Description Size Representative Images Unit Rate Cost

High Relief Mural of Mahtama Gandhi with specially designed

background that depicts the history and essence of India. 1800 x 1800 mm

High Relief Mural of Mahtama Upper ground floor -

Gandhi Above Lift

Material: Mixed Media (Fiberglass (FRP), Textile, Wood, Metal (6'x6')

Half statue of Mahtama Gandhi

Half statue of Mahtama Upper ground floor - 1200 mm high

Gandhi in Namaskar Pose Podium Sculptures (4')

Material: Bronze

High Relief Mural of Mahtama Gandhi's Charkha in artistic form.

Upper ground floor -

MR- 3 Mural on Charkha 1 ₹2,63,149 ₹2,63,149

Podium Sculptures Material: Mixed Media (Fiberglass (FRP), Textile, Wood, Metal

High Relief Mural of PM Narendra Modi with Charkha.

Relief Mural of PM Narendra

MR- 4 Upper ground floor 1 ₹5,92,086 ₹5,92,086

Modi with Charkha Material: Fiberglass (FRP)

Finish: Stone Dust

Low Relief Mural depicting from early weaving techniques and

4 Artistic Relief Mural

intricate textile patterns mark the origins of Indian textile

describing 4 periods of

Upper ground floor - Low craftsmanship, reflect Indian textiles' global prestige to The

Wall Khadi movement, led by Mahatma Gandhi.

Indus Valley Civilisation to

Low Relief Murals Simlilar themed murals showcasing all Khadi

4 Murals in one theme for Back of Billing Counter

each floor (all floors)

Material: Fiberglass (FRP)

Finish: Stone Dust

Chakra in the center, with "KHADI" written in various languages

on the Chakra and wall.

Abstact Art Installation 1800 mm high

MR- 7 Side wall of cafeteria 1 ₹6,65,754 ₹6,65,754

with Calligraphy (6')

Material: Mixed Media (Fiberglass (FRP), Textile, Wood, Metal

Mix of Miniatures and Relief Murals depiction textile traditions

Multiple Display boxes from all over the country.

Wall Size: 3600 x

MR- 8 Textile of India along staircase (first 2 ₹9,34,043 ₹18,68,087

floor) Material: Mixed Media (Fiberglass (FRP), Textile, Wood, Metal

High Relief Mural of Process Second floor, front of Wall-size artwork displaying the process of creating Khadi

of Khadi lift process - its history till date.

Digitally signed by MAYANK

S.NO. ITEMS Units QTY RATE TOTAL AMT.

Design, manufacture, supply, installation, testing, commissioning,

approvals and handing over in satisfactory working condition of

lifts including the cost of providing free comprehensive

maintenance for two years after handing over complete as per

1 specifications and as required and as below.

Supplying, installation, testing & commissioning of 10 Passenger ,

15 passenger Machine Room Less, having speed of 1 MPS in the

existing lift shaft as per detailed specifications enclosed and as

(i) Speed: 1 MPS

ii) 4 Stops With (all opening on the same side) with

floordesignation as:

(iii) Travel: 21.5 mtrs (approx.)

(iv) Stops & opening: 4

(v) Controller: A.C. variable voltage & variable frequency

Automatic rescue device complete with dry maintenance free

batteries i/c voice announcement system as two languages etc.

complete as required.

(vi) Operation : Microprocessor based Duplex selective collective

control with without attendant, drive VF Regenerative

(vii) Power - 415 V, 3 phase, 50 Hz, 4 wires system

Rear Mid Panel-Stainless Steel Hairline Finish

Rear Corner Panels- Stainless Steel Hairline Finish

Side Mid Panels- Stainless Steel Hairline Finish

Side Corner Panels-Stainless Steel Hairline Finish

Front Panels-Stainless Steel Hairline Finish

b. CAR DOOR FINISH:

Framed Glass door with Stainless Steel finish

c. LANDING DOORS FINISH:

Framed Glass door with Stainless Steel

d. CAR POSITION

Monochrome LCD-Blue Background & White font

CAR DIMENSIONS (W x D x H - mm)

1. 1450 mm W x 1200 mm D x 2200 mm H with clear car height

as 2100 mm or as per site conditions.

2. 1600 mm W x 1500 mm D x 2200 mm H with clear car height

as 2100 mm or as per site conditions.

Digitally signed by MAYANK

Anti-nuisance Car Call Protection, Independent Service (for

Duplex only), Overload Device, Nudging, Emergency

Firemen’s Service, Emergency Car Light Unit, Infrared Curtain,

Door Protection, Door Time Protection, Emergency Alarm

Button, Extra Door Time of Lobby & Parking, Door Open/Close

Button, Manual Rescue Operation, Belt Inspection Drive, Auto

Fan Cut Off, also

(ix) Car body will be of scratch proof SS finish.

(x) LED downlight fitting inside car capable of providing more

(xi) Full height Infra Red protection is to be provided for landing/

(xii) Provision of Toe guards, Fireman's switch etc.

FALSE CEILING TYPE:CD-41

FALSE CEILING FINISH:Stainless Steel Finish

VENTILLATION:Cross flow fan

HAND RAILS:Stainless Steel Mirror Finish Handrails on rear car

FLOORING:20 mm recess to accommodate GRANITE

Lift installation shall include all safety & control features as

specified in the specifications.

Car Operating Panel:

Full Height Stainless Steel Face Plate, Silver Brushed StSt

Display: Segmented LCD Display, Square Surface Mounted

Buttons with Braille

Landing Signalization: Stainless Steel 7-Segment Display, Surface

Mounted Silver Brushed StSt Square, Surface Mounted with

The features required for use of the lift by handicapped persons

eg hand rail, braile signage closing speed of doors etc 4

Nos.,follow latest CPWD norms

Automatic Rescue operation

Three-way Intercom,Voice Synthesizer

10 Passenger, 680 Kg,, 4 STOPS

SS Finish, Glass Doors, Speed = 2 27,75,985 5551970

MR - 1 1 mps, Machine Room Less G+3

15 Passenger , 1080 KG, 4 STOPS

SS Finish, stainless doors Speed = 1 2441316.85 2441317

MR - 2 1 mps, Machine Room Less G+3 No.

TOTAL CARRIED TO SUMMARY 7993287

Digitally signed by MAYANK

2.8 BOQ FURNITURE

S.NO. ITEMS DESCRIPTION Units QTY RATE TOTAL AMT.

Supply & Fixing Rack - 1200x500x2100 mm ht.

Supply of rack shall be made from 25 / 18 mm Ply board with laminate finish. Complete

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing Rack - 900x500x2100 mm ht.

Supply of rack shall be made from 25 / 18 mm Ply board with laminate finish. Complete

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing L shape rack - 1200x1000x500x2100 mm ht.

F-1.2, L-Shape Supply of counter shall be made from 25 / 18 mm Ply board with laminate finish. Complete

Rack including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing L shape rack - 1500x1000x500x2100 mm ht.

F-1.3, L-Shape Supply of counter shall be made from 25 / 18 mm Ply board with laminate finish. Complete

Rack including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing Low Ht. Rack - 1200x500x1200 mm ht.

Supply of rack shall be made from 25 / 18 mm Ply board with laminate finish. Complete

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing Billing counter - 1050x700x1050 mm ht.

Supply of rack shall be made from 25 / 18 mm Ply board with laminate finish. Complete

MR-6 F-3, COUNTER Nos. 4 31753 127013

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing Security desk - 2100x600x1050 mm ht.

Supply of rack shall be made from 25 / 18 mm Ply board with laminate finish. Complete

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing Security storage - 2100x600x1500 mm ht.

Supply of rack shall be made from 25 / 18 mm Ply board with laminate finish. Complete

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing COUNTER 1800X600X900 mm ht.

Supply of rack shall be made from 25 / 18 mm Ply board with laminate finish. Complete

MR-9 F-7, COUNTER Nos. 3 28508 85524

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing DISPLAY GONDOLA - DIA 1200 X 1200 MM mm ht.

Supply of Gondola shelves shall be made from 25 mm Ply board with laminate finish with

ms vertical pole. Complete including all hardware, Color as per approved sample. edges

shall be finished, all accessories and hardware as required.

Supply & Fixing DISPLAY GONDOLA - DIA 1200 X 1200 MM mm ht. (Arround

MR-11 F-8.1, GONDOLA Supply of Gondola shelves shall be made from 25 mm Ply board with laminate finish with Nos. 1 32236 32236

ms vertical pole. Complete including all hardware, Color as per approved sample. edges

shall be finished, all accessories and hardware as required.

Supply & Fixing Billing counter storage 1200x575x2100 mm ht.

Supply of counter shall be made from 25 / 18 mm Ply board with laminate finish. Complete

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing Billing counter storage 920x320x2100 mm ht.

Supply of counter shall be made from 25 / 18 mm Ply board with laminate finish. Complete

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing L shape rack - 725x725x500x2100 mm ht.

Supply of counter shall be made from 25 / 18 mm Ply board with laminate finish. Complete

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing slotted angle rack - 900x400x2100 mm ht.

Rack with 5 nos. of shelves should be hanging arrangement (adjustable). Racks

shall be manufactured from Slotted M.S angle shelves shall be manufactured from 1.6

mm thick CRCA sheet. The rack shall be assembled with G I bolt, nuts and washers.

Slotted angle and M.S sheet shall be made of cold rolled with anti- rust treated and shall be

MR-15 S-1, Slotted Rack Nos. 8 8333 66665

finished with powder coating with 7 tank treatment process on all parts of approved colour.

H/D Rubber bushes shall be provided to the bottom of legs of slotted angle racks.

Height of bottom shelves from ground is 100 mm. Minimum Load bearing capacity of each

shelf is 80- 100kgs. (± 10% Varaition allowed)

Supply & Fixing TV Sorage - 1000x300x600 mm ht.

Supply of tv storage shall be made from 25 / 18 mm Ply board with laminate finish.

MR-16 TV Storage Nos. 1 15350 15350

Complete including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Process Display

Supply of platform for display shall be made from 25 / 18 mm Ply board with laminate

finish. Complete including all hardware, Color as per approved sample. edges shall be

finished, all accessories and hardware as required. ( ± 10% Varaition allowed)

Feature Display 1200 x 600

Supply of platform for display shall be made from 25 / 18 mm Ply board with laminate

finish. Complete including all hardware, Color as per approved sample. edges shall be

finished, all accessories and hardware as required. ( ± 10% Varaition allowed)

Digitally signed by MAYANK

Feature Display 1475 x 450 x 2100 Supply of platform for display shall be made from 25 /

18 mm Ply board with laminate finish. Complete including all hardware, Color as per

MR-19 D-3 approved sample. edges shall be finished, all accessories and hardware as required. ( ± Nos. 1 69077 69077

10% Varaition allowed)

Feature Display 1875 x 450 2100 Supply of platform for display shall be made from 25 /

18 mm Ply board with laminate finish. Complete including all hardware, Color as per

MR-20 D-4 approved sample. edges shall be finished, all accessories and hardware as required. ( ± Nos. 1 83331 83331

10% Varaition allowed)

Pantry Counter L-Shape 1550 x 1275 x 550 x 830mm

Supplying & Placing Pantry Counter L-Shape with an overall size 1550 x 1275 x 550 x

830mm. The Pantry Counter shall be made up of 25 / 18 mm Ply board with laminate finish

with approved laminate and finish as per approved shade. The edges shall be sealed with

2mm thick strip of impermeable PVC that is cut to fit the size of board panel and duly

pasted with the assistance of edge banding machine at 200 degree Celsius. (± 10%

Varaition allowed)

Lunch Table 900 x 600 x 750mm

Rectangular in shape, 900 x 600 x 750 mm size Lunch table shall be of maximum 04

seater. Table made up of Well seasoned 2nd class Teak Wood and Ply Wood. Ply-wood

with Veener Top Supported on Teakwood Wood Framing finished with Medium Wood

polish and balancing laminate. Provision of PVC bush at bottom to avoid scratches on

delicatted surface. (± 10% Varaition allowed)

Linear Table 2400 x 400 mm

Supplying & Placing linear table with an overall size 2400mm X 400 mm X 750mm. The top

shall be made up of 25 / 18 mm Ply board with laminate finish with approved laminate and

finish as per approved shade. The profile shall be in rectangle shape and the edges shall

be sealed with 2mm thick strip of impermeable PVC that is cut to fit the size of board panel

and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The

top shall be supported on MS/CRCA rectangle pipe frame having cross-section area 70mm

X 20mm with 1.6mm thick. The understructure shall consist of four legs made up of MS

round pipe having dia. 38.1mm with 1.6mm thick. The Joints shall be made using TIG

welding. The metal parts shall be powder coated to dry film thickness of 40-60µ. There shall

be PPCP shoe provided at bottom to avoid scratches on the floor. (± 10% Varaition

Dining Chair Supplying & Placing

Dinning Chair The seat shall be made of 12mm thick plyboard and season/teak wood frame

upholstered with high resilience polyurethane foam 40mm thick having density 40kg/m³ with

leatherite tapestry 0.8mm thick and 535 GSM and the back shall be made of season/teak

MR-24 DC-1 wood malemine polish finish frame. The frame structure shall be supportd by four legs Nos. 12 13157 157890

made up of season/teak wood malemanie polish finish of size 50mm X 50mm. There shall

be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be

410±10 mm(D) X 450±10 mm(W) and back size shall be 440±10 mm(W) X 560±10 mm(H)

from seat. Overall height shall be = 1000±10 mm. (± 10% Varaition allowed)

Supplying of chief manager Visitor chairs in mesh back and fabric seat 'Back: Soft mesh.

Seat: Standard upholstered foam . Base: Plastic Nylon Base with hard or soft casters.

MR-25 DC-1 Arms: height adjustable arms . Mechanism: Synchro Tilt mechanism . Height adjustment: Nos. 2 10855 21710

Pneumatic seat height adjustment

Adjustable Lumbar Support . Back Lock at standard upright position

Color or mesh and structure : black only. (± 10% Varaition allowed)

MEZZAMINE FLOOR 0 0

Supply & Fixing Rack - 1200x500x2100 mm ht.

Supply of rack shall be made from 25 / 18 mm Ply board with laminate finish. Complete

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing Rack - 900x500x2100 mm ht.

Supply of rack shall be made from 25 / 18 mm Ply board with laminate finish. Complete

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing L shape rack - 1500x1000x500x2100 mm ht.

F-1.3, L-Shape Supply of counter shall be made from 25 / 18 mm Ply board with laminate finish. Complete

Rack including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing Low Ht. Rack - 1200x500x1200 mm ht.

Supply of rack shall be made from 25 / 18 mm Ply board with laminate finish. Complete

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing Billing counter - 1050x700x1050 mm ht.

Supply of rack shall be made from 25 / 18 mm Ply board with laminate finish. Complete

MR-30 F-3, COUNTER Nos. 5 37170 185849

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing COUNTER 1800X600X900 mm ht.

Supply of rack shall be made from 25 / 18 mm Ply board with laminate finish. Complete

MR-31 F-7, COUNTER Nos. 4 28508 114031

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing COUNTER- 600x450x750 HT mm ht.

Supply of rack shall be made from 25 / 18 mm Ply board with laminate finish. Complete

MR-32 F-9, COUNTER Nos. 1 9868 9868

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Digitally signed by MAYANK

Supply & Fixing Open shelf display GONDOLA - half round 1200X600 x1200 mm ht.

Supply of Gondola shelves shall be made from 25 mm Ply board with laminate finish with

ms vertical pole. Complete including all hardware, Color as per approved sample. edges

shall be finished, all accessories and hardware as required.

Supply & Fixing Bench sitting 1200x600x450 mm ht.

Supply of Bench sitting shall be made from 18 mm Ply board with laminate finish with ms

vertical pole. Complete including all hardware, Color as per approved sample. edges shall

be finished, all accessories and hardware as required.

Supply & Fixing Billing counter 3000x600x900 mm ht.

Supply of counter shall be made from 25 / 18 mm Ply board with laminate finish. Complete

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing Hanging display gondola rack - 1500x600x1500 mm ht.

Supply of counter shall be made from 25 / 18 mm Ply board with laminate finish. Complete

including all hardware, Hanging tube 25x25 mm with powder coating. Color as per

approved sample. edges shall be finished, all accessories and hardware as required.

Supply & Fixing L shape rack - 725x725x500x2100 mm ht.

Supply of counter shall be made from 25 / 18 mm Ply board with laminate finish. Complete

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing Shelf display- 1215x500x1495 mm ht.

Supply of display rack shall be made from 25 / 18 mm Ply board with laminate finish.

Complete including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing Rolling display- 1215x500x1495 mm ht.

Supply of saare rolls display rack shall be made from 25 / 18 mm Ply board with laminate

finish. Complete including all hardware, Color as per approved sample. edges shall be

finished, all accessories and hardware as required.

Supply & Fixing L Shape rack - 2000x1715x500x1495 mm ht.

Supply of counter shall be made from 25 / 18 mm Ply board with laminate finish. Complete

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Raised Seating with Storage (Gadda Seating) 9000 x 2000 x 600 mm ht.Providing &

Supplying Cabinet . It shall have dimensions 9000 x 2000 x 600 mm ht. shall be made from

25 / 18 mm Ply board with laminate finish. Complete including all hardware, Color as per

approved sample. edges shall be finished. Shelves are adjustable in variable heights and

shall have Uniformly Distributed Load capacity of 50 Kg per shelf . The vertical sides of

MR-41 F-19 storages from inside have contineous slots for mounting variable height shelves. microns It Nos. 1 383760 383760

is Hinged Door The cabinet shutters are made of Metal.Handles : Handle Shall be

aesthetically designed Recessed Handles in Plastic Moulding.Locking Mechanism: Locking

Mechanism shall be Cam lock in Metal Door.Levellor: It also have adjustable Leveler with

plastic base with height adjustment up to 15mm.he seat and back are made of foam and is

finished in fabric upholestry.( ± 10% Varaition allowed)

Stitching Machine

Needle bar linkage up and bottom feed structure and presser foot alternating elevation to

ensure smooth feed. Adopt big hook to save the time of bottom line changing. Automatic

MR-42 F-20 lubrication system, maximum speed up to 2000 rpm.New sewing structure to ensure low Nos. 2 84975 169951

tension sewing. Automatic sealed lubrication in elevation axis and swing axis in presser

foot. Heighten design in rear cover to avoid oil leakage.

Chair Providing and supplying high back chair. The seat shall be made of 15mm thick hot

pressed commercial plywood padded with high resilience polyurethane foam 50mm thick

having density 45kg/m³ and the back shall be made of bright bar padded with high

resilience polyurethane foam 50mm thick having density 45kg/m³. The same shall be

upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest of the chair

shall be made by keeping the natural curvature of the spine with contour lumbar support as

well as head support. The seat and back shall be arrested together with mechanism by

means of powder coated HR steel spine and armrest shall be used Aluminium PU arm

completely joint with seat. For seating durability the chair shall have synchro knee tilt 360

MR-43 F-21 degree revolving mechanism having four position locking and tilt tension adjustment with Nos. 1 19736 19736

anti shock feature. The pneumatic seat height adjustment for healthy seating, user can

adjust seat height up to 65mm with class-3 gas-lift to suit them using the lever under the

seat. The gas-lift mechanism should be tested as per ANSI/BIFMA standard. The pedestal

should have five legged die casted aluminium having pitch circle dia. 700mm fitted with 5

nos. twin wheel castor. The castor of the chair should be injection moulded in black 30%

glass filled nylon. The seat size shall be 510±10 mm(W) X 480±10 mm(D) and back size

shall be 500±10 mm(W) X 720±10 mm(H) from seat. Overall height shall be = 1225±10

mm, base width/ depth = 760±10 mm. (± 10% Varaition allowed)

Stitching Machine Stool

Supply & Fixing slotted angle rack - 900x400x2100 mm ht.

Rack with 5 nos. of shelves should be hanging arrangement (adjustable). Racks

shall be manufactured from Slotted M.S angle shelves shall be manufactured from 1.6

mm thick CRCA sheet. The rack shall be assembled with G I bolt, nuts and washers.

Slotted angle and M.S sheet shall be made of cold rolled with anti- rust treated and shall be

MR-45 S-1, Slotted Rack Nos. 17 13706 232997

finished with powder coating with 7 tank treatment process on all parts of approved colour.

H/D Rubber bushes shall be provided to the bottom of legs of slotted angle racks.

Height of bottom shelves from ground is 100 mm. Minimum Load bearing capacity of each

shelf is 80- 100kgs. (± 10% Varaition allowed)

Digitally signed by MAYANK

Round Hanging Display 1200 dia Supply of round hanging display rack shall be made

from 25 / 18 mm Ply board with laminate finish. Complete including all hardware, Color as

per approved sample. edges shall be finished, all accessories and hardware as required. (

± 10% Varaition allowed)

Platform for Display D5_ 4700 x 1200 x 100 mm ht.- Supply of platform for display shall

be made from 25 / 18 mm Ply board with laminate finish. Complete including all hardware,

Color as per approved sample. edges shall be finished, all accessories and hardware as

required. ( ± 10% Varaition allowed)

Platform for Manniquin Display D6_ 8700 x 900 x 100 mm ht. Supply of platform for

display shall be made from 25 / 18 mm Ply board with laminate finish. Complete including

all hardware, Color as per approved sample. edges shall be finished, all accessories and

hardware as required. ( ± 10% Varaition allowed)

Supply & Fixing Rack - 1200x500x2100 mm ht.

Supply of rack shall be made from 25 / 18 mm Ply board with laminate finish. Complete

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing Rack - 900x500x2100 mm ht.

Supply of rack shall be made from 25 / 18 mm Ply board with laminate finish. Complete

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing Rack - 1290x500x2100 mm ht.

Supply of rack shall be made from 25 / 18 mm Ply board with laminate finish. Complete

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing Rack - 475x500x2100 mm ht.

Supply of rack shall be made from 25 / 18 mm Ply board with laminate finish. Complete

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing Low Ht. Rack - 1200x500x1200 mm ht.

Supply of rack shall be made from 25 / 18 mm Ply board with laminate finish. Complete

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing Billing counter - 1050x700x1050 mm ht.

Supply of rack shall be made from 25 / 18 mm Ply board with laminate finish. Complete

MR-54 F-3, COUNTER Nos. 5 37170 185849

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing COUNTER 1800x600x900 mm ht.

Supply of rack shall be made from 25 / 18 mm Ply board with laminate finish. Complete

MR-55 F-7, COUNTER Nos. 9 40788 367093

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing COUNTER- 600x450x750 HT mm ht.

Supply of rack shall be made from 25 / 18 mm Ply board with laminate finish. Complete

MR-56 F-9, COUNTER Nos. 1 9868 9868

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing Open shelf display GONDOLA - half round 1000 x600 x1200 mm ht.

Supply of Gondola shelves shall be made from 25 mm Ply board with laminate finish with

ms vertical pole. Complete including all hardware, Color as per approved sample. edges

shall be finished, all accessories and hardware as required.

Supply & Fixing Billing counter 3000x600x900 mm ht.

Supply of counter shall be made from 25 / 18 mm Ply board with laminate finish. Complete

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing Display gondola - 2400x600x1500 mm ht.

Supply of counter shall be made from 25 / 18 mm Ply board with laminate finish. Complete

including all hardware, Hanging tube 25x25 mm with powder coating. Color as per

approved sample. edges shall be finished, all accessories and hardware as required.

Supply & Fixing L shape rack - 900x900x500x2100 mm ht.

Supply of counter shall be made from 25 / 18 mm Ply board with laminate finish. Complete

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing Low ht rack - 1215x500x900 mm ht.

Supply of low ht rack window side shall be made from 25 / 18 mm Ply board with laminate

finish. Complete including all hardware, Color as per approved sample. edges shall be

finished, all accessories and hardware as required.

Supply & Fixing Low ht rack - 1450x500x900 mm ht.

Supply of low ht rack window side shall be made from 25 / 18 mm Ply board with laminate

finish. Complete including all hardware, Color as per approved sample. edges shall be

finished, all accessories and hardware as required.

Supply & Fixing slotted angle rack - 900x400x2100 mm ht.

Rack with 5 nos. of shelves should be hanging arrangement (adjustable). Racks

shall be manufactured from Slotted M.S angle shelves shall be manufactured from 1.6

mm thick CRCA sheet. The rack shall be assembled with G I bolt, nuts and washers.

Slotted angle and M.S sheet shall be made of cold rolled with anti- rust treated and shall be

MR-63 S-1, Slotted Rack Nos. 19 13706 260408

finished with powder coating with 7 tank treatment process on all parts of approved colour.

H/D Rubber bushes shall be provided to the bottom of legs of slotted angle racks.

Height of bottom shelves from ground is 100 mm. Minimum Load bearing capacity of each

shelf is 80- 100kgs. (± 10% Varaition allowed)

Digitally signed by MAYANK

Cafeteria Counter 3000 x 600 x 1050 mm ht. (WITHOUT STONE)

Supply of Cafeteria Counter shall be made from 25 / 18 mm Ply board with laminate finish.

MR-64 CF-1 Complete including all hardware, Color as per approved sample. edges shall be finished, all Nos. 1 69077 69077

accessories and hardware as required. (± 10% Varaition allowed)

Cafeteria Counter 3000 x 600 x 1050 mm ht. (WITHOUT STONE)

Supply of Cafeteria Counter shall be made from 25 / 18 mm Ply board with laminate finish.

Complete including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required. (± 10% Varaition allowed)

Cafeteria Counter 2400 x 600 x 1050 mm ht. (WITHOUT STONE)

Supply of Cafeteria Counter shall be made from 25 / 18 mm Ply board with laminate finish.

MR-66 CF-3 Complete including all hardware, Color as per approved sample. edges shall be finished, all Nos. 1 59209 59209

accessories and hardware as required. (± 10% Varaition allowed)

Cafeteria Chair:

Supplying and placing cafeteria Chair. The seat shall be made metal frame upholstered

with high resiliance moulded polyurethane foam 50mm thick having density 50kg/m³ with

khaki leatherite tapestry 0.8mm thick 535 GSM and the back shall be made of upholstered

with high resiliance moulded polyurethane foam 25mm thick having density 50kg/m³ with

MR-67 CF-4 khaki leatherite tapestry 0.8mm thick 535GSM. The seat and back shall be fixed with metal Nos. 20 9868 197362

frame. The frame structure shall be loop support type made up of MS CRCA chrome plated

tubular pipe having cross-section area Dai with 10mm thick. The seat size shall be 430±10

mm (D) X 450±10 mm (W) and back size shall be 410±10 mm (W) X 400±10 mm (Ht) from

seat. Overall height shall be = 710±10 mm, overall depth = 650±10 mm & overall width =

620±10 mm. (± 10% Varaition allowed)

Cafeteria Table 750 x 750 mm

Providing and fixing Cafeteria Table 750 x 750a x 750 with top made of 25mm prelaminated

particle board and CRCA Powder coated base ,The above furniture should be as per

specification and sample approved by client. ( ± 10% Varaition allowed)

Cafeteria Bar Stool

Providing and supplying High Stool / Chair for high counters. The stool has Wooden

MR-69 CF-6 Coloured base with foot support . It has plastic seat shell with Cushioned Seat wrapped in Nos. 10 17543 175433

Leatherite / Fabric . Seat dimensions are 380 - 420 mm W x 365 - 400 mm D , Back

dimensions are 245 - 350 mm Ht - 350 . 420 mm W. ( ± 10% Varaition allowed)

Process Display 3600 x 600 x 2100 mm Supply of platform for display shall be made

from 25 / 18 mm Ply board with laminate finish. Complete including all hardware, Color as

per approved sample. edges shall be finished, all accessories and hardware as required. (

± 10% Varaition allowed)

Providing and fixing High Back Mesh Chair with Headrest. SPECIFICATIONS: Back

Height - High Back w/Headrest,Back Finish - Mesh with Lumbar Support,Back Mesh Color -

MR-71 F-21 Black,Seat Finish - Fabric,Seat Fabric Color - Black,Seat Height Adjustment - Nos. 1 11842 11842

Pneumatic,Mechanism Type - Synchronized Tilt,Back Tilt Lock - Upright Position,Back Tilt

Tension - Adjustable,Armrests Type - Fixed arms,Base Type - 5-Star in Black nylon

base,WARRANTY: 5 Years from the date of invoice ( ± 10% Varaition allowed)

SECOND FLOOR 0 0

Supply & Fixing Rack - 1200x500x2100 mm ht.

Supply of rack shall be made from 25 / 18 mm Ply board with laminate finish. Complete

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing Rack - 900x500x2100 mm ht.

Supply of rack shall be made from 25 / 18 mm Ply board with laminate finish. Complete

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing Rack - 1290x500x2100 mm ht.

Supply of rack shall be made from 25 / 18 mm Ply board with laminate finish. Complete

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing Rack - 475x500x2100 mm ht.

Supply of rack shall be made from 25 / 18 mm Ply board with laminate finish. Complete

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing Rack - 1200x500x2100 mm ht.

Supply of rack shall be made from 25 / 18 mm Ply board with laminate finish. Complete

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing Billing counter - 1050x700x1050 mm ht.

Supply of rack shall be made from 25 / 18 mm Ply board with laminate finish. Complete

MR-77 F-3, COUNTER Nos. 4 31753 127013

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing COUNTER 1800X600X900 mm ht.

Supply of rack shall be made from 25 / 18 mm Ply board with laminate finish. Complete

MR-78 F-7, COUNTER Nos. 8 28508 228063

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing DISPLAY GONDOLA - DIA 1000 X 1200 MM mm ht. (Arround

MR-79 F-8.2, GONDOLA Supply of Gondola shelves shall be made from 25 mm Ply board with laminate finish with Nos. 1 24122 24122

ms vertical pole. Complete including all hardware, Color as per approved sample. edges

shall be finished, all accessories and hardware as required.

Digitally signed by MAYANK

Supply & Fixing COUNTER- 600X450X900 HT mm ht.

Supply of rack shall be made from 25 / 18 mm Ply board with laminate finish. Complete

MR-80 F-9, COUNTER Nos. 1 9868 9868

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing Open shelf display GONDOLA - half round 1000 x600 x1200 mm ht.

Supply of Gondola shelves shall be made from 25 mm Ply board with laminate finish with

MR-81 F-10, DISPLAY Nos. 2 27631 55261

ms vertical pole. Complete including all hardware, Color as per approved sample. edges

shall be finished, all accessories and hardware as required.

Supply & Fixing Billing counter 3000x600x900 mm ht.

Supply of counter shall be made from 25 / 18 mm Ply board with laminate finish. Complete

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Digitally signed by MAYANK

Supply & Fixing Hanging display gondola rack - 2100x600x1500 mm ht.

Supply of counter shall be made from 25 / 18 mm Ply board with laminate finish. Complete

including all hardware, Hanging tube 25x25 mm with powder coating. Color as per

approved sample. edges shall be finished, all accessories and hardware as required.

Supply & Fixing L shape rack - 900x900x500x2100 mm ht.

Supply of counter shall be made from 25 / 18 mm Ply board with laminate finish. Complete

including all hardware, Color as per approved sample. edges shall be finished, all

accessories and hardware as required.

Supply & Fixing Low ht rack - 1215x500x900 mm ht.

Supply of low ht rack window side shall be made from 25 / 18 mm Ply board with laminate

finish. Complete including all hardware, Color as per approved sample. edges shall be

finished, all accessories and hardware as required.

Supply & Fixing Low ht rack - 1450x500x900 mm ht.

Supply of low ht rack window side shall be made from 25 / 18 mm Ply board with laminate

finish. Complete including all hardware, Color as per approved sample. edges shall be

finished, all accessories and hardware as required.

Round Hanging Display 1200 dia

Supply of round hanging display rack shall be made from 25 / 18 mm Ply board with

laminate finish. Complete including all hardware, Color as per approved sample. edges

shall be finished, all accessories and hardware as required. ( ± 10% Varaition allowed)

Platform for Display D9_ 5900 x 600 x 100 mm ht.

Supply of platform for display shall be made from 25 / 18 mm Ply board with laminate

finish. Complete including all hardware, Color as per approved sample. edges shall be

finished, all accessories and hardware as required. ( ± 10% Varaition allowed)

Platform for Display D13 _1000 x 1200 x 100 mm ht.

Supply of platform for display shall be made from 25 / 18 mm Ply board with laminate

finish. Complete including all hardware, Color as per approved sample. edges shall be

finished, all accessories and hardware as required. ( ± 10% Varaition allowed)

Process Display-5_4800 x 600 x 2100 mm

Supply of platform for display shall be made from 25 / 18 mm Ply board with laminate

finish. Complete including all hardware, Color as per approved sample. edges shall be

finished, all accessories and hardware as required. ( ± 10% Varaition allowed)

Stitching Machine

Needle bar linkage up and bottom feed structure and presser foot alternating elevation to

ensure smooth feed.

Adopt big hook to save the time of bottom line changing.

Automatic lubrication system, maximum speed up to 2000 rpm.

New sewing structure to ensure low tension sewing.

Automatic sealed lubrication in elevation axis and swing axis in presser foot. Heighten

design in rear cover to avoid oil leakage.

Providing and fixing High Back Mesh Chair with Headrest. SPECIFICATIONS: Back

Height - High Back w/Headrest,Back Finish - Mesh with Lumbar Support,Back Mesh Color -

MR-92 F-21 Black,Seat Finish - Fabric,Seat Fabric Color - Black,Seat Height Adjustment - Nos. 1 19736 19736

Pneumatic,Mechanism Type - Synchronized Tilt,Back Tilt Lock - Upright Position,Back Tilt

Tension - Adjustable,Armrests Type - Fixed arms,Base Type - 5-Star in Black nylon

base,WARRANTY: 5 Years from the date of invoice ( ± 10% Varaition allowed)

Stitching Machine Stool

Providing and fixing Medium Back Mesh Chair with Lumber Support, Seat Size 510mm W x

510mm D, Back Size 480m W x 520mm Ht . The chair comes with PP arms , Nylon base

with 50mm castors . The chair has Push Back Mechanism .The chair comes with

Pneumatic Gas Lift of Stroke=95 mm . Seat Height Minimum 480mm from Ground and

Maximum 570mm. Overall size of the chair is 620 mm W x 680 mm D x (950 mm-

1050mm) H .The Chair Warranty : 3 Years.( ± 10% Varaition allowed)

Reception table 1800 x 500 x 1050

Providing and supplying ReceptionDesk having Dimension 1800mm L x 500mm x 1050mm

Height . It has 25mm thick Worktop and Gable Ends made of pre Laminated Particle Board

sealed with PVC Edge Banding. Front and Modesty Panel are 18mm thick Pre Laminated

ParticleBoard Sealed with PVC EdgeBanding.. The Counter Top is 25 mm Thick

Postformed ParticleBoard. Unit has One Pull out drawer with Lock and Handle.( ± 10%

Varaition allowed)

Low Ht. Storage 3000 x 250 x 900mm ht.

Supply of platform for Low height storage shall be made from 25 / 18 mm Ply board with

MR-96 OF-3 laminate finish. Complete including all hardware, Color as per approved sample. edges Nos. 1 71270 71270

shall be finished, all accessories and hardware as required. ( ± 10% Varaition allowed)

Digitally signed by MAYANK

Providing and supplying mid back chair. The seat shall be made of 15mm thick hot pressed

commercial plywood padded with high resilience polyurethane foam 50mm thick having

density 45kg/m³ and the back shall be made of bright bar padded with high resilience

polyurethane foam 50mm thick having density 45kg/m³. The same shall be upholstered with

leatherite tapestry 0.8mm thick and 535 GSM. The backrest of the chair shall be made by

keeping the natural curvature of the spine with contour lumbar support. The back shall be

arrested together with mechanism by means of powder coated HR steel spine and armrest

shall be used Aluminium PU arm completely joint with seat. For seating durability the chair

shall have synchro knee tilt 360 degree revolving mechanism having four position locking

and tilt tension adjustment with anti shock feature. The pneumatic seat height adjustment

for healthy seating, user can adjust seat height up to 65mm with class-3 gas-lift to suit them

using the lever under the seat. The gas-lift mechanism should be tested as per

ANSI/BIFMA standard. The pedestal should have five legged die casted aluminium having

pitch circle dia. 700mm fitted with 5 nos. twin wheel castor. The castor of the chair should

be injection moulded in black 30% glass filled nylon. The seat size shall be 510±10 mm(W)

X 460±10 mm(D) and back size shall be 500±10 mm(W) X 580±10 mm(H) from seat.

Overall height shall be = 1045±10 mm, base width/ depth = 760±10 mm. ( ± 10% Varaition

Providing and supplying high back chair. The seat shall be made of 15mm thick hot

pressed commercial plywood padded with high resilience polyurethane foam 50mm thick

having density 45kg/m³ and the back shall be made of bright bar padded with high

resilience polyurethane foam 50mm thick having density 45kg/m³. The same shall be

upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest of the chair

shall be made by keeping the natural curvature of the spine with contour lumbar support as

well as head support. The seat and back shall be arrested together with mechanism by

means of powder coated HR steel spine and armrest shall be used Aluminium PU arm

MR-98 OF-5 completely joint with seat. For seating durability the chair shall have synchro knee tilt 360 Nos. 2 27411 54823

degree revolving mechanism having four position locking and tilt tension adjustment with

anti shock feature. The pneumatic seat height adjustment for healthy seating, user can

adjust seat height up to 65mm with class-3 gas-lift to suit them using the lever under the

seat. The gas-lift mechanism should be tested as per ANSI/BIFMA standard. The pedestal

should have five legged die casted aluminium having pitch circle dia. 700mm fitted with 5

nos. twin wheel castor. The castor of the chair should be injection moulded in black 30%

glass filled nylon. The seat size shall be 510±10 mm(W) X 480±10 mm(D) and back size

shall be 500±10 mm(W) X 720±10 mm(H) from seat. Overall height shall be = 1225±10

mm, base width/ depth = 760±10 mm.

Digitally signed by MAYANK

MD Table : 1650 x 600 x 750mm ht.

Side Table : 1050 x 450 x 750mm ht.

Supplying & Placing Modular table in completely knock down conditions with that is to be

assembled at site. The worktop shall have the size 76mm thick made up of Medium Density

Fibre-board with approved veneer laminate and PU polish accordingly. The table top profile

shall be in rectangle shape with round corners and full round post forming edges. The table

top shall be supported on MDF board based gable end. The end wall of the table on the

side shall be topped by gable end. It should be made up of 76mm thick medium density

fibre-board and profile shall be in moulded construction with full round post forming edges

and duly deco painted. The table shall be clad with 18mm thick modesty panel which

MR-99 OF-6 provide structural support for the table. It should be 18mm thick medium density fibre-board Nos. 2 383760 767519

in linear shape with appropriate PVC edge banding and veneer laminate. There shall be

buffers provided at the base to avoid scratches on the floor. The table shall have side unit

for storage purpose It shall have 2 nos. of drawer, 1 nos. of filling space with door and 1

nos of open space . The drawer shall be operated with profile handle and easily close &

open with the assistance of sliding channels to enable smooth operation and sliding rail

track and concealed crank hinge. Drawer facai, sides and all other shall be made in 18mm

thick and drawer base shall be 9mm thick. To protect the wall from kicks, abrasion and

serve as a decorative moulding, skirting shall be provided at bottom. The complete

structure shall be supplied with approved veneer laminate, PU polish and deco painted.

Waiting Area Single Seater Sofa

Supplying and placing single seater sofa that shall be constructed from natural hard wood

and commercial plywood having inner frame. The thickness of the wood should allow for

the heavy tension webbing. The sofa shall have spring attached and also be padded

separately. The frame shall be padded with high resilience polyurethane foam having

density 40Kg/m³ in seat and 32Kg/m³ in back. There shall be cushion arm provided padded

MR-100 OF-7 with high resilience polyurethane foam having density 32Kg/m³. The complete structure Nos. 4 29604 118417

shall be upholstered with leatherite tapestry 0.8±0.1 mm thick and 535 GSM. The

understructure shall have Gold plated 75 mm Height. There shall be shoe provided at the

bottom to avoid scratches on the floor. The seat height = 430±10 mm, overall width =

1010±10 mm, overall depth = 860±10 mm & overall height = 870±10 mm. ( ± 10% Varaition

L-Shape Sofa 2400 x 1200

Center Table 900 x 450mm

Overall Size : Width : 900mm Depth : 450mm Height : 450mm TABLE MATERIALS: Glass

of 08 mm thk tempered, Solid rubber woood legs and frame, MS sheet as bottom shelf .

DECORATION MATERIALS & SPECIFICATIONS: (DENSITY / TYPE): PU coating to the

rubber wood parts, clear glass.

( ± 10% Varaition allowed)

End Table 600 Dia

Providing and placing in position wooden side table in required shape, design and curve of

size 600mm dia x 450mm ht made up of teak wood work. The top having made up of 12

mm ply with 3.5 mm premium quality veener with decorative edge moulding fixed in 2nd

class teak wood having minimum width of 25mm duly carved and moulded alround the top

with brass inlay work . The vertical drop from top of centre table shall not be less than

50mm and shall be made in 2nd class teak wood work with decorative carving, curve and

design on the wooden surface. The unit shall have 3 Nos. ornamental legs made with 2nd

class teak wood including melamine polishing and casted brass paws at bottom with the

required finished surface, all complete as per approved sample and direction of Engineer-in-

charge. ( ± 10% Varaition allowed)

Digitally signed by MAYANK

Workstations 1200 x 600mm

Workstations 1200 x 600mm - Providing and placing workstation table in completely knock down conditions

with an overall size 1320mm X 660mm X 1200mm that is to be assembled at site. The work top shall have the

size 1200mm X 600mm made up of 25mm thick Pre-laminated particle board of grade II of IS 12823 with

approved laminate and finish as per approved shade. The profile of the top shall be in rectangle shape and

the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board

panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. A pullout keyboard

trey shall be provided of 18mm thick Pre-laminated particle board having size 525mm X 350mm. The trey

shall be operated on keyboard channel. The workstation shall have panel based partition of 60 mm thick with

overall height 1200mm. The partition shall be linear in profile and provided in the front side of user as well as

on the both sides of the user. The top trim, top bar, mid bar, vertical bar, raceway, skirting shall be made up of

aluminium extrusions (pre-treated) and duly powder coated with 40µ-60µ thick. The trims shall have the size

60mm X 19mm with 1.5mm thick covered with Die cast end caps on joints 2 ways, 3 ways & 4 ways (L-cover

for corner, T-cover for middle section wherever required). The aluminium raceway shall be situated below the

worktop with an overall size 116mm(H) X 60mm(D) with 1.4 mm cover thickness and 2mm back thickness as

per requirement of inlaying the electrical management and carrying the wire horizontally. The exposed vertical

and horizontal faces of the frames shall be snap fitted with trims. There shall be soft-board (with fabric) and

MR-104 OF-11 marker board provided at front of the user. Laminated top tile and bottom tile shall be situated at both sides of Nos. 6 29604 177626

the user and below the work top respectively. The Partition shall have concealed wire management

capabilities and should be engaged for responsive and safe operations of power, telecommunications and data

(LAN) and has separate components for electrical, data and telephone cables having adequate capability of

both the vertical and horizontal wire movements. Slots/cut-outs should be given on raceways to fix all

electrical and data points. Zinc coated small top support brackets shall be fixed on the partition for table top

support. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be situated

at bottom. Adjustable leveller shoe shall be provided at bottom of the partition to avoid scratches on the floor.

Fixed type pedestal shall be provided with an overall size 400mm X 450mm X 725mm. The pedestal shall be

made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, top, facia shall be 18mm

thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1

filing drawer. The drawer shall be operated with SS handle and easily close & open with the assistance of

roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking

mechanism in which all the drawer shall be synchronized lock with one single key. To protect the wall from

kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. A nylon castor based

CPU unit shall be provided with an overall size 468mm X 284mm with 18mm thick Pre-laminated particle

board. ( ± 10% Varaition allowed)

Supply & Fixing slotted angle rack - 900x400x2100 mm ht. Rack with 5 nos. of

shelves should be hanging arrangement (adjustable). Racks shall be manufactured

from Slotted M.S angle shelves shall be manufactured from 1.6 mm thick CRCA

sheet. The rack shall be assembled with G I bolt, nuts and washers. Slotted angle and

M.S sheet shall be made of cold rolled with anti- rust treated and shall be finished with

MR-105 S-1, Slotted Rack Nos. 5 13706 68529

powder coating with 7 tank treatment process on all parts of approved colour. H/D Rubber

bushes shall be provided to the bottom of legs of slotted angle racks. Height of bottom

shelves from ground is 100 mm. Minimum Load bearing capacity of each shelf is 80-

100kgs. (± 10% Varaition allowed)

Digitally signed by MAYANK