Supply and Installation of LED High Mast Lighting at IA Pilakhani Distt Saharanpur

Amount

Electrical Works.

Supply & Fixing of 16 Mtr. High Mast shaft of approved make with rising system hot dip galvanized in side & out side dip, heaving pole sheet thickness 3 mm top dia minimum 150 mm bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia double drum winch, including making suitable foundation as per manufacture drawing, site requirment along with foundation bolts, nuts washers, anchor plates etc. complete in all respect. (Make : Philips/Crompton/Bajaj).

Supply & Fixing of 12.5 Mtr. High Mast shaft of approved make with rising system hot dip galvanized in side & out side dip, heaving pole sheet thickness 3 mm top dia minimum 150 mm bottom dia 310 mm base plate 25 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia double drum winch, including making suitable foundation as per manufacture drawing, site reguirment along with foundation bolts, nuts washers, anchor plates etc. complete in all respect.(Make : Philips/Crompton/Bajaj)

Supply & fixing of factory wired integral 200 W LED flood light luminaries with die cast aluminium housing built with driver set confirming to IP 66 protection complete in all respect. (Make : Philips/Bajaj/Crompton/Bajaj/Wipro) Guarantee upto 05 Years Catt-AA

Supply and fixing 25A TPN capacity of automatic street light cubicle control panel painted with anticorrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering insteument & instrument box with CTs etc. complete in all respect.

Supply and fixing 15 A TPN capacity of automatic street light cubicle control panel painted with anticorrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering insteument & instrument box with CTs etc. complete in all respect.

Supply and wiring of submain with 2 number 2.5 sqmm FRLSH PVC insulated single core multistranded copper conductor cable in existing conduit complete in all respects complete.

Supplying and laying of 25 sq.mm 3.5 core aluminium conductor PVC insulated, armoured, served, sheathed cable 1100 V grade in existing G1/HDPE DWC PVC Pipe or along the ST electric pole/panel/High Mast Lighting System Complete in all respects.

Suppy & Laying of cable in ground with protection of burnt bricks on sides and top put across with over a cushian of 75 mm thick sand around the cable complete in all respects and as per direction of Engineer/Side-incharge.

Supply & Laying of 63 mm HDPE pipe ISI marked along with all accessories like socket,bend,couple etc. confirming to IS 14930 Part II complete with fitting and cutting, jointing etc in 750mm ground below G.L. including excavation and refilling thee trench material, labour and T&P for proper completion of work.

Supply & fixing of 25 sq. mm 3.5 core brass nickle plated compression gland for PVC insulated cable complete in all respect.

S/B of 40 mm dia x 4.5 mtr. long G.I. pipe vertically for earthing having 12 mm dia. Holes spaced 75 mm apart drilled upto 2 mtr. from the bottom complete with earthing lead of no.6 to 8 SWG GI wire in G.I.pipe upto appron upto switch board 30 cm square box with hinged cover masonary enclosure. Funnel of top, alternate layers of charcoal and salt at least 150 mm thick alround etc. as per direction E/I complete in all respect.

Supply & fixing of 50 mm dia GI pipe B class for climbing up the cable from ground to over head LT line pole/Metering point complete with GI fitting including material,labour and T&P.

Supply & fixing MS clamp made out from 50x6mm MS flat for securing GI Pipe/HDPE with ST pole.