Loading
Loading…
Loading…
Tender ID
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹64.2 LAccepted-AOC FLAT NO 402 4TH FLOOR BLDG NO 31 HANSGEET CO OP HSG SOCIETY PANT NAGAR GHATKOPAR E MUMBAI 400 075 | MUMBAI SUBURBAN | MAHARASHTRA | 400075 | L1 | Accepted-AOC AOC | |
| 2 | L2₹68.7 L+₹3.5 L (5.32%)Rejected-Finance | L2 | Rejected-Finance Other Than Being Lowest | |
| 3 | L3₹77.4 L+₹12.1 L (18.6%)Rejected-Finance GE W COLABA MUMBAI | CHANDRAPUR | MAHARASHTRA | 441205 | L3 | Rejected-Finance Other Than Being Lowest | |
| 4 | L4₹78.7 L+₹13.5 L (20.6%)Rejected-Finance ROOM NO 680 GANESH MURTY NAGAR PART NO 03 CAPT PRAKASH PETHE MARG COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L4 | Rejected-Finance Other Than Being Lowest | |
| 5 | L5₹78.9 L+₹13.7 L (21.0%)Rejected-Finance NOT AVAILABLE | L5 | Rejected-Finance Other Than Being Lowest |
| Sl No | Description | Qty | Unit | SN CONSTRUCTION L3 | Colaba Group Works L7 | Shetty Construction Co L6 | B P ENTERPRISES L4 | RAMESH ENTERPRISES L1 | Prabhu associates L2 | Bob Enterprises L8 | SHREE JAGDISH FURNITURE CO. L5 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling floor, hearth or wall tiling (fixed at any portion but not backing) including cement mortar bedding and removing rubbish off the premises (outside MD land) complete all as specified and directed. | 2,532 | Sqm | 10 ₹25,320 Lowest | 30 ₹75,960 | 35 ₹88,620 | 15 ₹37,980 | 30 ₹75,960 | 15 ₹37,980 | 18 ₹45,576 | 27 ₹68,364 |
| 2.00 | M&L for coloured non-skid ceramic tiles 7-8mm thick rectified glossy (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11Sqm in floors etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed (1:6), complete all as specified and directed. | 450 | Sqm | 640 ₹2,88,000 | 780 ₹3,51,000 | 850 ₹3,82,500 | 450 ₹2,02,500 Lowest | 500 ₹2,25,000 | 550 ₹2,47,500 | 810 ₹3,64,500 | 538 ₹2,42,100 |
| 3.00 | M&L for coloured glazed ceramic tiles as in vertical surface, of size exc 0.06 Sqm and not exc 0.16 Sqm 7-8mm thick as in dado/skirting or on vertical surface, over and including 10mm thick backing coat in CM 1:4,set and jointed in neat cement slurry and pointed in white or colour cement match to existing surfaces complete all as specified and directed. | 780 | Sqm | 680 ₹5,30,400 | 820 ₹6,39,600 | 900 ₹7,02,000 | 475 ₹3,70,500 Lowest | 750 ₹5,85,000 | 550 ₹4,29,000 | 750 ₹5,85,000 | 705 ₹5,49,900 |
| 4.00 | M & L for coloured light shade Digitial Glazed vitrified tiles of size 600 x 600 mm, 7 to 8mm thick, laid in flooring, with & including 5mm thick adhesive of Ferrouscrete (FERRO-1122) / Fevimate XL- Pidilite / Gold star of Bal Endura or Techno commercial equivalant including necessary roughning of existing PCC flooring & levelling the floor if required, grouting the joints complete all as specified and as directed. | 1,240 | Sqm | 880 ₹10,91,200 | 850 ₹10,54,000 | 950 ₹11,78,000 | 790 ₹9,79,600 | 550 ₹6,82,000 Lowest | 800 ₹9,92,000 | 1,080 ₹13,39,200 | 800 ₹9,92,000 |
| 5.00 | M&L for coloured light shade Digitial Glazed vitrified tiles 7 to 8mm thick, superior quality, as in skirting, over & including a backing coat of 10mm thick in CM 1:3, complete and making nosing at right angle corner, including levelling the wall, complete all as specified and as directed.
Note : Skirting shall be flush with the walls | 62 | Sqm | 900 ₹55,800 | 980 ₹60,760 | 950 ₹58,900 | 790 ₹48,980 | 650 ₹40,300 Lowest | 880 ₹54,560 | 1,100 ₹68,200 | 847 ₹52,514 |
| 6.00 | M & L for applying texture paint of 2mm to 3mm thick of desired finish as approved by GE over a coat of exterior wall primer which includes preparation of old decorated surfaces, cleaning of loose paint , grease , growth of fungus, algae or moss by using wire brushing and watering and applying two coats of exterior emulsion paint complete all as specified and directed. | 7,200 | Sqm | 380 ₹27,36,000 | 90 ₹6,48,000 Lowest | 175 ₹12,60,000 | 420 ₹30,24,000 | 290 ₹20,88,000 | 200 ₹14,40,000 | 300 ₹21,60,000 | 195 ₹14,04,000 |
| 7.00 | Treatment of sunken floor slab compraises of the following specifications and all as specified :-(i) M&L for cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. 40mm thick avg PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in padding conc to achieve proper slope including cutting holes in bricks or RCC wall for spout (Cost cutting holes and pipes shall be measured and paid separately) ii) Rendering of uneven surfaces with 6mm thick CM 1:4 mixed with integral water proofing compound @ 3% by wt of cement consumed. Fill it with water and check dampness and seepage. Where dampness/seepage is noticed, nozzles shall be fixed and grouting carried out.( WPC shall be measured & paid separately) (iii) All junctions points of side wall where CI/GI pipes are passing through shall be sealed with epoxy puty. (iv) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean. (v) M&L for applying two coats of polymer modified cementious water proof coating as per manufacturs instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed.(This item shall be measured and paid separately) (vi) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with integral water proofing compound 3% by wt of cement consumed as per manufacturer's specification including rounding of corners and junctions sloping towards spout.( WPC shall be measured & paid separately) (vii) All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all round after painting with anticorrosive paint (this item shall be measured & paid separately)). Note :- Test the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage seepage and to the entire satisfaction of GE. Test shall be done in presence of reps of PMG and record for each sunken slab shall be maintained. Cost of testing is inclued in the rates quoted above. | 450 | Sqm | 350 ₹1,57,500 | 280 ₹1,26,000 | 475 ₹2,13,750 | 300 ₹1,35,000 | 180 ₹81,000 Lowest | 700 ₹3,15,000 | 350 ₹1,57,500 | 1,385 ₹6,23,250 |
| 8.00 | Cutting holes in bricks or RCC walls exc half brick built in cement mortar including making good after inserting and setting spouts all as specified. | 30 | Each | 25 ₹750 Lowest | 220 ₹6,600 | 100 ₹3,000 | 150 ₹4,500 | 50 ₹1,500 | 150 ₹4,500 | 55 ₹1,650 | 205 ₹6,150 |
| 9.00 | M&L GI pipe 50mm bore medium grade laid on sunken floor complete all as specified and direced. | 15 | RM | 100 ₹1,500 Lowest | 380 ₹5,700 | 600 ₹9,000 | 150 ₹2,250 | 250 ₹3,750 | 300 ₹4,500 | 325 ₹4,875 | 405 ₹6,075 |
| 10.00 | M&L All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all round including painting with anticorrosive paint all as specified and directed. | 15 | RM | 30 ₹450 Lowest | 220 ₹3,300 | 400 ₹6,000 | 150 ₹2,250 | 100 ₹1,500 | 300 ₹4,500 | 150 ₹2,250 | 110 ₹1,650 |
Tender Value
₹1 Cr
EMD Value
₹1 L
Closing Date
6 Apr 2026, 6:00 pmClosed
CWE (NW) Mumbai
CWE (NW) Mumbai
REPAIR/REPLACEMENT TO FOOT PATH, DRAIN AND DRAIN COVER, SUNKEN FLOOR OF BATH ROOM AND PERIODICAL CLEANING OF UNDER GROUND SEWAGE LINES IN UNDER CELL -1 UNDER GE(NW) NOFRA, COLABA, MUMBAI
2026_MES_755838_1
8685/CWE(NW)MUMBAI/E8
Open Tender
Civil Works
Item Rate
330 days
GE (NW) NOFRA
Class C
Category a (i)
7 documents required · 7 mandatory
₹1,000
GE (NW) NOFRA
₹1 L
Yes
6 Jul 2026
11 Mar 2026
8 Apr 2026
11 Mar 2026
6 Apr 2026
1 Apr 2026
11 Mar 2026 - 31 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling floor, hearth or wall tiling (fixed at any portion but not backing) including cement mortar bedding and removing rubbish off the premises (outside MD land) complete all as specified and directed. | 2,532 | Sqm | - | - |
| 2 | M&L for coloured non-skid ceramic tiles 7-8mm thick rectified glossy (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11Sqm in floors etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed (1:6), complete all as specified and directed. | 450 | Sqm | - | - |
| 3 | M&L for coloured glazed ceramic tiles as in vertical surface, of size exc 0.06 Sqm and not exc 0.16 Sqm 7-8mm thick as in dado/skirting or on vertical surface, over and including 10mm thick backing coat in CM 1:4,set and jointed in neat cement slurry and pointed in white or colour cement match to existing surfaces complete all as specified and directed. | 780 | Sqm | - | - |
| 4 | M & L for coloured light shade Digitial Glazed vitrified tiles of size 600 x 600 mm, 7 to 8mm thick, laid in flooring, with & including 5mm thick adhesive of Ferrouscrete (FERRO-1122) / Fevimate XL- Pidilite / Gold star of Bal Endura or Techno commercial equivalant including necessary roughning of existing PCC flooring & levelling the floor if required, grouting the joints complete all as specified and as directed. | 1,240 | Sqm | - | - |
| 5 | M&L for coloured light shade Digitial Glazed vitrified tiles 7 to 8mm thick, superior quality, as in skirting, over & including a backing coat of 10mm thick in CM 1:3, complete and making nosing at right angle corner, including levelling the wall, complete all as specified and as directed.
Note : Skirting shall be flush with the walls | 62 | Sqm | - | - |
| 6 | M & L for applying texture paint of 2mm to 3mm thick of desired finish as approved by GE over a coat of exterior wall primer which includes preparation of old decorated surfaces, cleaning of loose paint , grease , growth of fungus, algae or moss by using wire brushing and watering and applying two coats of exterior emulsion paint complete all as specified and directed. | 7,200 | Sqm | - | - |
| 7 | Treatment of sunken floor slab compraises of the following specifications and all as specified :-(i) M&L for cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. 40mm thick avg PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in padding conc to achieve proper slope including cutting holes in bricks or RCC wall for spout (Cost cutting holes and pipes shall be measured and paid separately) ii) Rendering of uneven surfaces with 6mm thick CM 1:4 mixed with integral water proofing compound @ 3% by wt of cement consumed. Fill it with water and check dampness and seepage. Where dampness/seepage is noticed, nozzles shall be fixed and grouting carried out.( WPC shall be measured & paid separately) (iii) All junctions points of side wall where CI/GI pipes are passing through shall be sealed with epoxy puty. (iv) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean. (v) M&L for applying two coats of polymer modified cementious water proof coating as per manufacturs instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed.(This item shall be measured and paid separately) (vi) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with integral water proofing compound 3% by wt of cement consumed as per manufacturer's specification including rounding of corners and junctions sloping towards spout.( WPC shall be measured & paid separately) (vii) All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all round after painting with anticorrosive paint (this item shall be measured & paid separately)). Note :- Test the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage seepage and to the entire satisfaction of GE. Test shall be done in presence of reps of PMG and record for each sunken slab shall be maintained. Cost of testing is inclued in the rates quoted above. | 450 | Sqm | - | - |
| 8 | Cutting holes in bricks or RCC walls exc half brick built in cement mortar including making good after inserting and setting spouts all as specified. | 30 | Each | - | - |
| 9 | M&L GI pipe 50mm bore medium grade laid on sunken floor complete all as specified and direced. | 15 | RM | - | - |
| 10 | M&L All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all round including painting with anticorrosive paint all as specified and directed. | 15 | RM | - | - |
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.40 MB
BOQ_846610.xls
BOQ • 2.31 MB
8685.rar
Tender Documents • 3.63 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .