works Contract (Labour )

Amount

Excavation of Pole pit of size 2'x2'x1/6 of the height of the pole upto 8 mtr pole by using JCB or Manual

Excavation of pit in Hard soil (common to all size of poles)

Excavation of pit in Rocky area (common to all size of poles) by blasting /Manual

Excavation of Stay pit 2'x2'x5' depth by using JCB or manual

Excavation of Stay pit 2'x2'x5' depth in hard rock soil

Erection of RCC poles/PSC poles/Metal poles up to 8.00 M (27' ) by using JCB or manual

Erection of RCC poles/PSC poles/Metal poles above 9.00 M by using JCB or maual

Erection of stay set complete with fixing up stay wire EYE, bow, Guy shackle, Binding etc.,

Erection of stay set complete in the rock area by blasting

Fixing of HT "V" cross arms(all types) / channel cross arms/guarding Cross arms

Fixing of LT 3 phase cross arms

Fixing of LT Single phase cross arms

Fixing of HT/LT TI Fittings

Fixing of HT pin Insulators 11 KV/ 22 KV/ 33 KV

Fixing of HT 11 KV strain disc.

Fixing of HT 22 KV/33 KV strain disc.

Fixing of LT pin Insulator

Fixing of LT shackle

Fixing of Aluminium Knob

Earthing of pole with pin including looping binding and burying

Fixing of top channel 10' centre/15' centre

Fixing of centre support for bed channel

Fixing of belting angle

Erection of 11 KV AB Switch

Erection of 11 KV Vertical type AB Switch for single pole DT

Erection of 11 KV HG Fuse set

Erection of 11 KV Solid core HG Fuse set

Feeder arrangements with open type fuse units

Fixing of HT LAS

Fixing of LT LAS

HT Jumpering complete for Transformer DT Structure

HT Jumpering complete for DP Structure

Fixing of cross bracing(4 nos angles) 10' Centre/15' centre

Fixing of LT Cable arrangements while erecting single pole DT

Fixing of Earth coller for earth pits

Erection of Aluminium bus bar pipe complete for HT bus bar arrangements for DP structure

Fixing of support insulator angle and erection of 3 nos Pin insulator

Paving and stringing of conductors of sizes upto 7/2.59 mm ACSR or other equivalent conductor

Paving and stringing of conductors of sizes upto 7/3.35mm ACSR or other equivalent conductor

Paving and stringing of conductors of 7/4.09mm ACSR or other equivalent conductor

Paving and stringing of conductors of 7/4.72 mm Dog Conductor or other equivalent conductor

Releasing and reerection (resagging) of one run of all sizes of conductor

Numbering of pole by using Enamel paint including cost of paint and painting charges (Numbering in black letters with yellow base by using stencils/skilled painters. The height of lettering shall be 40

Painting of poles and all other metal parts while erecting D.P. Structure brush and paint supplied by the contractor

Painting of pole and all other metal parts while erecting new single pole distribution transformer Structure (brush and paint supplied by the contractor)

Service connection details painting

Structure Concreting , Concreting of poles with size (2'x2'x5') including cost of Cement ,20 mm jelly and Sand with a mixture of 1:2:4 and plastering of concrete with ratio 1:2

Sleeve concreting with size (2'x2'x3') including cost of excavation Cement ,40 mm jelly and Sand with a mixture of 1:3:6 and plastering of concrete with ratio 1:2 including materials

Stay concreting of Stay with Size 1.5' X 1.5' X 3.0' including cost of Cement, 40mm Jelly and sand (with supply) with mixture 1:3:6 along sleeve concreting and plastering of concrete portion above

Erection of Double Pole Transformer Structure complete as per TNEB standard Erection of Top channel,Bed Channel, Structure Materials ,HG fUSE UNIT,LAS HT/LT , Belting Angle, AB Switch,Jumbering works stay erection work ,stay concreting ,pole concreting, tapping channel , all materials including painting, feeders arrangement, colour washing of RCC poles etc.,

Erection of Single Pole Transformer Structure complete as per TNEB standard Erection of Top channel,Bed Channel, Structure Materials ,HG fUSE UNIT,LAS HT/LT , Belting Angle, AB Switch,Jumbering works stay erection work ,stay concreting ,pole concreting, tapping channel , Earthing of structure including pit arrangements all materials including painting, feeders arrangement, colour washing of RCC poles etc.,

(iv) Erection of 11 KV Single pole DP structure with stay as per TNEB Standard including fixing of top channel, cross bracing concreting, painting, colour washing etc., with single earth

Erection of Distribution Transformer including loading of Distribution Transformer at stores and erection at structure or vice versa (i) Above 25 KVA to 100 KVA

(ii) 250-500 KVA and above

(iii) Failed DT replacement below 100 KVA

(iv) Failed DT replacement 100 KVA and above

Replacing the corroded earth pipes of transformer structure and replacing the earth wire completely with aluminium lugs for termination

Replacement of corroded earth pipe

Loading or unloading of Distribution Transformer (i) Upto 100 KVA

(ii) Above 100 KVA and upto 500 KVA

(iii) Metering set of all ratios

Loading or unloading of various sizes of poles(i) RCC, PSC pole upto 8.00 m length

(ii) All REC, RCC pole above 8.00 m length

(iii) Metal poles all sizes

Loading of Conductor

Unloading of Conductor

Loading / Unloading of Iron & Steel

Loading / Unloading of Oil

Loading / Unloading of line materials

Loading / Unloading of 11 KV strain disc

Loading / Unloading of LT Pin insulator shackle, guy shackle, LT Pin, Metal parts, HT pin etc.,

Loading / Unloading of single phase meters

Loading / Unloading of three phase meters

Loading and Stacking of Materials

Transportation of all types and sizes of poles and other associated materials from Road side to pole pit and vice versa upto 0.50 KM

Transportation of all type of poles by bullock cart or other vehicle (for all sizes of poles including loading and unloading) (i) For a lead upto 5 KM

(ii) Above 5 KM of lead of every KM

Transporting of conductors of all sizes from road side to pit locations upto one KM of Conductor

(i) Transporting of Distribution Transformer / Line materials from stores to office / site upto 10 KM distance by engaging 1 Ton capacity Minidor (Lorry)

Breaking and Releasing of grills from RCCPSC poles

Erection of concrete earth tub to Distribution Transformer earth pipe

Dismantling of detoriated cables/Replacement of various size(95,120,185 Sq.mm) from Distribution Transformer LT bushing to LT open type clamp and provision of suitable lugs at both the ends.

b)Above 8Kms per km

Releasing of ACSR/AAAC conductors from conductor drum and coiling ACSR 7/3.35, 7/2.59, AAAC 7/2.50, 7/3.15 MM (Per/Km.)

Renewal of jumper from 22/11 KV line to AB switch to HG Fuse, HG Fuse to Distn. Transformer with PG clamps.

Cutting of coconut leaves /tree branches

Drilling of hole in channel only 3/4" & 1" per hole

Cutting of flat

Cutting of channel

Cutting of Angle

Cutting of pipe

RSJ pole cutting

RSJ pole welding

Providing of line spacers for single phase line

Providing of line spacers for three phase line

Hiring Charges for JCB

Clearing of Jungle

Set right of all sizes of leaning of poles

Erection of LT Shunt Capacitor

Ground patrolling of HT lines during Breakdown

Rectification of snapped HT line during Break down

Rectification of snapped LT line during Break down

Replacement of Clamps of all sizes in Substation

Replacement of Jumpers less than 1 metre

Replacement of Jumpers more than 1 metre

Dismantling charges Dismantling of RCC, REC, PSC & metal pole of all sizes including the closing of the pit

For breaking the mass concrete of all supports

Dismantling of stay set complete (i) including stay rod

(ii) Without stay rod

Dismantling of conductor of upto 7/3.35 including transporting the conductors to the nearest road side and stocking in coils

Dismantling of conductor of above 7/3.35 including transporting the conductors to the nearest road side and stocking in coils

Dismantling of Transformer structure materials complete set and transporting the same from the location to the road side

Dismantling of Cross arm clamps TI fitting hardwares, insulators etc.,

Loading and unloading of HT Cable including coiling and recoiling

Transport of 11 KV HT cable from departmental stores to work spot by engaging private vehicle upto 5 km

Transport of 11 KV HT cable from departmental stores to work spot by engaging private vehicle above 5 km

Excavation of cable trench 0.6 meters width and 1.2 meters depth including cost of providing sign boards, danger lights indication arrangements wherever necessary all lead,lift, labour and tools

Tar Road

Concrete Road

LAYING OF HT CABLE Laying of 11 KV 3X300 sq mm XLPE cable

Laying of 11 KV 3X120 sq mm XLPE cable

Laying of 33 KV 3X400 sq mm XLPE cable

Laying of 33 KV 1X630 sq mm XLPE cable

Covering HT cable by cement "V" trough after covering the cable with good loose earth including loading, unloading and transport from stores to site and letter painting of feeding details & Cable

Refilling with excavated earth layers well consolidated as per std specification including all materials, lead, lift etc., complete.

Transport back any balance cable, empty drums and other materials if any by engaging private vehicle including recoiling, coiling and loading and unloading at both sides from workspot to store

Transport back any balance cable, empty drums and other materials if any by engaging private vehicle including recoiling, coiling and loading and unloading at both sides from workspot to store

Loading and unloading of LT Cable including coiling and recoiling

Transport of LT cable from departmental stores to work spot by engaging private vehicle upto 5 km

Transport of LT cable from departmental stores to work spot by engaging private vehicle above 5 km

Excavation of cable trench 45 cm width and 75 cm depth including cost of providing sign boards, danger lights, indication arrangements wherever necessary, lead, lift, labour and tools and

Tar Road

Concrete Road

Laying of LT Cables Laying of 4 X 240 sq.mm cable

Laying of 4 X 120 sq.mm XPLE cable

Laying of 4 X 25 sq.mm cable

Laying of 2 X 16 sq.mm cable

Refilling with excavated earth layers well consolidated as per std specification including all materials, lead, lift etc., complete.

Trenchless cable laying (New/Rectification) Laying of HT UG Cable using Trenchless technique without pipes

Erection of pillar box including excavation of foundation pits as per standard specification 2 Nos pillar concrete walls, coping and earthing the pillars below ground level 1 feet and above 2 feet/3

4/6/8 way pillar box 3 feet

4/6/8 way pillar box 4 feet

LT Cable fault rectification works Earth Work Exacavation to the (Cable Route) required depth, width

Concrete

Laying of LT Cable Laying of 4 X 240 sq.mm cable

Laying of 4 X 120 sq.mm XPLE cable

Laying of 4 X 25 sq.mm cable

Laying of 2 X 16 sq.mm cable

Refilling the trench cable

Transport of all materials to attending the fault from office to site and site to office vice versa

Provision of joint 240/120 Sq mm

1. HT Cable fault rectification works 2. ATTENDING TO FAULTS IN 11KV & 33KV CABLES BY DOING IT MANUALLY

Concrete

33 KV 1 X 630 sqmm

33 KV 3 X 630 sqmm & 3X 400 sqmm

Installation of terminations by employing private jointer in the absence of company jointer 33 KV 1x630 sqmm Indoor/Outdoor terminations

Installation of terminations by employing private jointer in the absence of company jointer 33 KV 3x400/3x630 sqmm Indoor/Outdoor terminations

Refilling with M- sand over the cable and jointscost of M- sand PWD Schedule of Rate 11 KV

Refilling labour charges /mtr (As per PWLC Rate) 11 KV

Transporting of cables and joint kits from stores to site 11 KV

Transporting of cables and joint kits from office to site 11 KV

Engaging JCB For Excavation of Earth and Back filling the earth after rectification of fault 11KV

Engaging JCB For Excavation of Earth and Back filling the earth after rectification of fault 11 kv

Engaging JCB For Excavation of Earth and Back filling the earth after rectification of fault 33 KV