COMPREHENSIVE MAINT OF BDE HQ, MES IB, AND OTHER KEY LOCATION AT MIL STN UDAIPUR

Amount

Supply and fixing in repair 0.56 mm dia MS galvanised wire cloth with average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples, beads or in steel windows/doors complete all as specified and directed.

Supply and fixing 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane as including in repair complete all as specified and directed.

Supply and fixing for figured glass, 3mm thick, pin head type and glazing with oil putty or beads in squares not exc. 0.50 Sqm in each pane as in repairs complete all as specified and directed.

Supply and fixing 10mm thick toughned glass as in hinged doors, partitions automatic door sand similar work including cutting to shape, drilling holes required including taking out old broken/ unservicable glass complete all as specified and as directed

Supply and fixing for figured glass, 4.8mm thick, pin head type and glazing with oil putty or beads in squares not exc. 0.50 Sqm in each pane as in repairs complete all as specified and directed.

Supply and fixing in repair 300 mm, mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as directed.

Supply and fixing in repair 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished

Supply and fixing in repair brass ,4 lever Locks, cupboard, grade I, size 50 mm fixed with shutter with necessary cutting and fixing complete.

Supply and fixing in repair 16 mm thick prelaminated particle board exterior grade,prelaminated side with decorative choice lamination& side balancing white lamination fixed with screws to timber frame work complete all as specified and as directed

Supply & fixing in repair Continuous (piano) hinges, mild steel, bright finish or electrogalvanised of width of flaps (when open) in 30mm

Supply & Fixing in repair magnetic ball catches with 8mm dia steel ball brass body and striking plate including letting in and fixed, overall length of cover plate 140mm long complete all as specified

Supply & Fixing in repair self closing/auto Casement type hinges 90/180 degree. (Make: Haffle/ Dorma/Hettich)

Supply & Fixing in repair Telescopic steel channel ball bearing drawer channel silver/chrome plated size 250/300 mm etc ( Make : Hettich/Haffle/KEA)

Supply & Fixing in repair Corner glass shelf size 200 mm radius with and including bracket and glass complete set etc.

Supply & Fixing in repair Glass shelf size 500 X 125 mm radius with and including bracket and glass complete set etc.

Supply & Fixing in repair stainless steel Towel Rack with lower hanger size 24'' (600 mm) fixed to walls with hook etc. (Make- Jaquar Cat No-AHS-1581H)

Supply and fixing in repairs HDPE PVC lid (tank cover) with locking arrangement for 500/1000 Ltrs capacity PVC tank complete all as specified.

Supply & fixing in repair rubber based door strip fixed to bottom edge of door shutter using small nails / self-adhisive type to minimise gap & avoid entry of insects inside house width & length as required at site

Supply and fixing Tubular towel rail aluminium anodised 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete.

Material & labour for fabrication of pressed steel cupboard shutter using 1mm thick MS plain sheet with frame 1.25mm thick bent to shape including two coat of synthetic enamel paint on internal surfaces & two coat of hammer tone finish on external surface alongwith locking arrangement mortice lock ,handle etc complete all as specified as per drg No CEBZ/TD/12/2008 sheet 1/3 to 3/3.

Supply & fixed in repairs stainless steel sink with drainage board , made out of 1.00mm thick sheet for kitchen or laboratory with plug,washers, waste pipe, cast irn cantilever bracket of overall size 915x460mm bowl size 410x330x160mm complete all as specified.

Repairs existing aluminium door/ window shutter including frame with completely/partially taking down door shutter and tightening of all screws, replacing including provision of unservicable hinge, handle, lock, aluminium plate & floor door stopper directed by Engineer-in-Charge.

Material and labour for anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified (Note minimum thickness of powder coating 50 micron. )

Supply and fixing anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified Note minimum thickness of powder coating 50 micron.

Supply and fixing anodised aluminium window and ventilator shutters,powder coated side hung / sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

Supply & Fixing 5.0 mm thick sheet glass, ordinary quality plain or tinted and glazing with rubber gasket in square exceeding 0.5 Sqm in each pane, complete all as specified and directed.

Supply and fixing galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete .

Supply and fixing Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete.

Supply and fixing aluminium handles extruded type of size 125mm, complete all as specified and directed.

Supply and fixing 300 mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cost or extruded sections or cost alumminium alloy all as spd and directed.

Material and labour for high durability stainless steel as in railing stain/polished grade 304 including baluster,supporting pipe, post including necessary fittings for glass all as approved by Engr in Charge

Supply & fixing 12 mm thick frosted toughened glass in rectangular shape area exc. 0.8 sqm to 1.5 sqm including etching area 30 cm x 30 cm as per design given by Engr-in- charge as per direction of Engr-in-charge in railing etc. all as spd and directed.

Supply & fixing 12 mm toughened glass in area not exc. 1.5 sqm each in any shape with and including stianless steel cleat for fixing to jambs/cill or flooring etc. as per direction of Engr-in-charge etc. all as spd and directed.

Supply & fixing toughened glass in frame less doors, 12 mm thick pain/frosted in area exc. 1.5 sqm but not exc 2.5 sqm each in any shape with and including etching area 30 cm x 30 cm as per design as per direction of Engr-in-charge etc. all as spd and directed.

Supply & fixing Stainless Steel Glass Door Single/Double Lock knob/cylinder type, Chrome finish for toughened glass door or alumimium door etc. all as spd and directed. (Make- Ozone or equivalent)

Supply & fixing Stainless Steel Toughened Glass pull Handle C-type nickle finish size 200 mm to 300. etc. all as spd and directed.(Make- Ozone or equivalent)

Supply & fixing Stainless Steel corner, bottom and overall patch fittings, hydaulic or standard type Toughened Glass pull Handle C-type nickle finish size 200 mm to 300. etc. all as spd and directed.(Make- Ozone or equivalent)

Supply & fixing Stainless Steel hydarulic hinge standard size for Toughened Glass Doors etc. all as spd and directed.(Make- Ozone or equivalent)

Supply & fixing Stainless Steel partion hinge wall to glass 90 degree/Glass to Glass 90/180 degree size OR shower hinge for Toughened Glass Doors etc. all as spd and directed.(Make- Ozone or equivalent)

Supply & fixing PVC plain or coloured large size Venetian Blinds roller type vertical or horizontal any type, blinds shall be 1 mm thick and 75 to 100 mm width for windows/ventilators all as spd and directrd.

Supply and fixing in repair 150 mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed.

Supply & fixing in repairs stainless steel type curtain rod 22 to 25mm dia as per sample

Supply & fixing of purpose made brackets trade pattern for stainless steel decorative type curtain rods suitable for holding 22 to 25mm dia as per sample as in repair.

Supply & fixing of stainless steel decorative fincals(round type with mirror optic finish)trade pattern for decorative type curtain rods suitable for 22 to 25mm dia curtain rods as per sample as in repaie complete all as specified.

Supply & fixing of stainless steel decorative fincals wall to wall trade pattern suitable for decorative type curtain rods 22 to 25mm dia as per sample as in repair complete all as specified.

Supply and fixing in repair Door closer aluminium (extruded) hydraulically regulated designation No 1 universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg and fixed.

Supply and fixing in repair double action Floor Spring Hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing poivet made of brass, other parts made of brass, other part made of mild steel heavy duty and fixed.

Supply and fixing in repair 140mm overall length of cover plate floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring with lower portion fixed with hard rubber, fixed in floor complete all as specified and directed.

Supply and fixing in repair for 75mm long Hasp and staple, aluminium anodised including bolt to hinge plate and fixed with screw as per specified.

Supply & fixing in repairs of stainless steel aluminium door mortise lock of suiable size as per existing match of good quality complete all as specified and directed

Taking down chowkats or frames area not exceeding 1.50 Sqm (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good cill, jamb in cement mortar (1:3) or PCC 1:2:4 type B1, complete all as specified and as directed. (Note – The quoted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts and no separate item for making good of hold fasts shall be paid).

Taking down chowkats or frames area exceeding 1.50 Sqm and not exceeding 4.00 Sqm (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good cill, jamb in cement mortar (1:3) or PCC 1:2:4 type B1, complete all as specified and as directed. (Note – The qouted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts and no separate item for making good of hold fasts shall be paid).

Taking down shutters of any description not exceeding 1.00 Sqm each, from chowkhat complete all as specified.

Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm each, from chowkhat complete all as specified.

Supply and fixing for mild steel framed work as in door chowkats/gate of angle or angle iron work as in fixing of cooler stand by drilling/cutting the stone masonry wall and fixing up to 1st floor walls, other section of grade Fe-290-Gde E-165 with gusset plate rails, braces etc welded/drilled to fixing of steel sheeting or other covering doors etc. to be prepared for sliding or hanging with and including either hooks and hinges or steel hanging door fittings (exclusive steel sheeting or other covering, running rails & guides), complete all as specified and as directed by the Engr-in-Charge.

Material & labour for PCC 1:2:4 type B-1 ( using 20mm graded mechanically crushed stone aggregate) as in bed blocks, copings, apex stones,side of interlocking tiles, embedding to cooler stands in wall, embedding hold fasts etc complete all as specified and directed.

Supply and fixing, made 100% Solid WPC (Wood Polymer Composite) Door Frames of cross section 65 mm x 125 mm (moulded) having single rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K-Value 57-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ruce husk/wheat husk)and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 Kg/cbm & manufactured by "Rajshri/Echon or Eq" an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of (Min, 990N) Minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer prof, water/moisture proof & fire retardant & fixed in position with and including SS Dsh Fasteners/Hold Fast of required dia and length, all as per specifications drawings as directed,. Material test certificate and authentication should be compoulsory provided by the manufacturing company.

Supply & fixing Ist class teakwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned a joints including French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats.

Supply & fixing Ist class teakwood 35mm thick plain design as per direction of Engr-in-charge, framed, panelled shutters (minimum 4 panels), with panels of timber panels are raised and have bevelled or chamfered margins and framing is moulded on solid (for each side) with and including provn of glass with itching of axe or other unit emblem size upto 0.10 sqm in middle rail of door including French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats.

Supply and fixing for 2nd class hard wood 35mm thick Plain, framed, panelled shutters (06 number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete. (Make : A-1 Teakwood, Cat No : A1T-MD2 or equivalent)

Supply and fixing IInd class (hollock) hard wood factory made 35mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed. (Make : A-1 Teakwood, Cat No : A1T-GD5 or equivalent)

Material and labour for two coat of synthetic enamel painting to new wood surface of any description, not otherwise described over 10cm width or girth including preparation of new surfaces over a coat of pink primer complete all as specified and directed.

Supply and fixing, made 100% Solid WPC (Wood Polymer Composite) Door Frames of cross section 45 mm x 70 mm (moulded) having single rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K-Value 57-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ruce husk/wheat husk)and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 Kg/cbm & manufactured by "Rajshri/Echon or Eq" an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of (Min, 990N) Minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer prof, water/moisture proof & fire retardant & fixed in position with and including SS Dsh Fasteners/Hold Fast of required dia and length, all as per specifications drawings as directed,. Material test certificate and authentication should be compoulsory provided by the manufacturing company.

Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N / m2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fie retardant WPC to be laminated with PVC foil of minimum 14 micron thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engr-in-Charge. (Note : Stainless steel butt hinges and necessary SS screws shall be paid separately).

Supply & fixed 200 mm long aluminium anbodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

Supply & fixed 150 mm long Extruded aluminium alloy handles, fabricated type anodised complete all as specified.

Supply & fixing 100 mm long brass butt hinges with galvanised MS hinge pin etc.

Supply & fixing Brass handles size 150 mm, cast type,polished bright

Supply & fixing Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed

Supply & fixing Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and 300 mm long complete all as specified.

Supply & fixed 100 mm butt hinges, medium weight cold rolled mild steel and fixed complete all as specified and directed.

Supply and fixing 100 mm long stainless steel butt hinges with galvanised MS hinge pin etc.

Supply and fixing alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified.

Supply and fixing double legged door stopper of overall length of cover plate 150 mm of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floors and rubber all as specified and directed by Engr-in-charge.

Supply & fixed in repairs MS helical door spring 150 mm long fixed with screws to wooden chowkhats or fixed with welding to steel chowkhats.

Supply & fixed steel windows box type ERW hollow 'P' section comprising double frame including gauged and glazed skelton shutter 30mm thick jointed internally with flat iron 25x3mm complete including hinges handle tower bolts, stops lugs,grill etc all as shown in drawing CEJZ TD -20 sheet 1/3 to 3/3 as applicable complete Note :- For the purpose of measurement & payment double shutter with frame and grill shall be considered as one unit. (ii) Glazing,wire mesh & painting shall be measured & paid separately.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads.

Supply and fixing for 3.0 mm thick sheet glass, ordinary quality and glazing with oil putty in square not excc 0.5 Sqm in each pane complete all as specified and as directed by the EIC.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified as directed.

Material and labour for suspended false ceiling system using Chicago Metallic (E-grid) exposed suspended system, grid size 600mm x 600mm comprising of GI poweder coated main dunner fo dimensions 39mm x 24mm xx 0.8mm thick (thickness comprising of GI/0.4mm +PPPCGS/0.3mm & weight of runner 1.35 Kg for 3600mm length), cross tee of dimensions 29mm x 24mm x 0.8mm thick (thickness comprising of GI/0.4mm + PPPCGS/0.3mm & weight of Tee 0.195 Kg for 600mm length) and wall angle of dimensions 22.2mm x 22.2mm x 0.65mm thick (thickness comprising of GI / 0.35mm + PPPCGS/.3mm & weight of angle 0.70Kg for 3050mm length) with and including 4mm thick HPSC (High pressure steam cured) pre-primed and apply one coat OBD during fixing , self embossed, tentured designed board to be placed in the grid system duly suspended with 4mm dia GI wire hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt-0.007 kg/clip), hold down clips (wt-0.0035 kg/clip), with provn of light fixture complete all as per manufacturer's instructions and as directed.

Supply and fixing in repair Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes and bed concrete etc complete.(Make:Parryware/Cera/Jaquar Essco/Prayag)

Supply and fixing in repair Vitreous China wash down water closet pan (Pedestal Pattern) and trap (standard pattern) coloured as approved including connection to drain (or outgoing pipe) and to flushing pipe anti symphonize pipe etc. including plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jointingcomplete with fixing bolts complete (Make:Parryware/Cera/Jaquar Essco/Prayag)

Taking down old vitreous china EWC and cistern and Supply and fixing vitreous china EWC one piece Single Piece WC with PP Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fittings, Fixing Accessories And Accessories Set, Size: 360x660x755 mm, S Trap- 220 mm all as specified and directed. (Make -Jaquar Essco, Brand-Aspire, CAT No: AIS-WHT-101851S220SPPSM or Eq.)

Supply and fixing in repair Plastic water closet seat,any colour as available, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jointing complete.(Make:Parryware/Cera/Jaquar Essco/Prayag)

Supply and fixingin repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of 10ltrs capacity (Make:Parryware/Cera/Jaquar Essco/Prayag)

Supply and fixing in repair Vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe fixed in repairs (excluding flushing cistern, flush pipe and waste pipe) all as specified.(Make:Parryware/Cera/Jaquar Essco/Prayag)

Supply and fixing in repair Vitreous china wash hand basin (550X400mm) white with pedestal , flat back excluding taps but including brackets & CP waste coupling 32mm, LDPE waste pipe 32mm upto floor complete all as specifed and directed. (Make:Parryware/Cera/Jaquar Essco/Prayag)

Supply and fixing in repairs PVC connection 15mm dia of length not less than 450mm with both ends, brass fly nut complete all as specified & as directed.

Supply and fixing in repair Urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60gms).

Supply and fixing CP brass health faucet fitted with bracket, screwed down for iron pipe or for brass ferrule complete all as specified and directed.

Supply & fixing in repair Jet spray for water closet pan pedestal pattern in repair.

Supply and fixing for CP brass Soap Dish Holder, complete all as specified and as directed. Make : Cera/Hindware/Parryware/Coronet/Plumber /Gem

Supply & Fixing in repair chromium plated shower rose 190mm round shape fancy type fixed to 15mm bore pipe all as specified and directed by Engr-in-charge. (Make:Parryware/Cera/Jaquar Essco/Prayag)

Supply & Fixing in repair chromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed by Engr-in-charge.

Supply & Fixing in repair Brass CP bath Mixer 3 in 1 System with provision for overhead and hand shower suitable 15mm bore of pipe and fixed.

Supply and fixing in repair of fancy type pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shank supply and fixing ly nuts for iron pipe of 15mm bore fancy type.

Supply and fixing in repairs of fancy type chromium plated Bib tap, 15mm bore all as specified and directed by Engr-in-charge.

Supply and fixing in repair 15mm bore angle valves/stop valves cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union all as specified and directed by Engr-in-charge.

Supply and fix,as in repair, pillar tap standard of PTMT any colour screwed, for iron pipe 15mm bore (minimum weight 90 gms) all as specified and directed.

Supply and fix, as in repair, bibtap standard of PTMT any colour screwed, for iron pipe 15mm bore (minimum weight 90 gms) all as specified and directed.

Supply & Fixing in repair 15mm bore tubes medium grade galvanized with all fittings such as Tee, elbows, sockets, unions, plugs, short lenghts etc. and fixed complete to walls and ceilings or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge.

Supply & Fixing in repair 20 mm bore tubes medium grade galvanized with all fitting such as Tee, elbows, sockets, unions, plugs, short lenghts etc and fixed complete to walls and ceilings or laid in floors of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge.

Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc complete.

Taking up or down steel tubing and connections, 20 mm bore fixed on walls, floors or ceiling etc complete.

Supply and fixing in Repairs 16 mm bore of pipes 3-layer PP-R (Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceiling, or in floors etc complete.

Supply and fixing in Repairs 20 mm bore of pipes 3-layer PP-R (Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceiling, or in floors etc complete.

Demolition and breaking up of CI/AC rain water pipe /UPVC pipe line 100mm/75mm dia incl all fittings, complete all as specified.

Supply & Fixed for 110mm dia UPVC, soil waste drain pipe, type ‘A’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, laid in trenches or in floors, complete all as specified and directed.(Note- Rubber rings for pipes and fittings shall be conforming to IS 5382-1985)

Supply & Fixed for 110mm dia UPVC, soil waste drain pipe, type ‘A’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint fixed to wall, complete all as specified and directed.(Note- Rubber rings for pipes and fittings shall be conforming to IS 5382-1985)

Supply & Fixed for 75 mm dia UPVC, soil waste drain pipe, type ‘A’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint fixed to wall, complete all as specified and directed.(Note- Rubber rings for pipes and fittings shall be conforming to IS 5382-1985)

Supply & Fixed for 110 mm bore UPVC (SWR) bend with access door including jointing with solvent cement, complete all as specified. .(Note- UPVC bends shall be conforming to BS 4515 DIN 19531 and DIN 19534)

Supply & Fixed 110 mm bore UPVC (SWR) ( singleT) equal or unequal including jointing with solvent cement, complete all as specified.

Supply & Fixed 110 mm bore UPVC (SWR) branch piece,single ( singleY) equal or unequal including jointing with solvent cement, complete all as specified. .

Supply & Fixed for 75 mm bore UPVC (SWR) bend including jointing with solvent cement, complete all as specified. .(Note- UPVC bends shall be conforming to BS 4515 DIN 19531 and DIN 19534)

Supply and fixing Stainless steel gratings 100mm bore size fixed with cement motar.

Supply and fixing in repair PVC Flexible waste pipe 32/40 mm dia with socket for steel sink upto floor level and length not less than 0.60 M complete all as specified and directed.

Supply and fixing in repair brass chromium plated kitchen sink waste coupling comperising of four parts CP brass kitchen sink strainer & basket, rubber gasket, PTMT locknut, PTMT strainer sleeve with 32mm outlet and check of any dia as per site requirement complete all as specified and directed.

Supply and fixing in repairs PVC flushing cistern valveless, syphonic action kit and washers type, 10 litres capacity with inlet, ball valve float and handle any make with exisiting fixed, supplied and fixed in repairs, complete. Make: – Commander, ISI marked /Parryware ISI marked/Cera/Jaquar, ISI marked.

Material and labour for Rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete .

Material and labour for Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete .

Supply and fixing in repair, Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) complete.

Cleaning and removing, Exc 250 Ltrs but not exc 500 Ltrs all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of following capacity.

Cleaning and removing, Exc 500 Ltrs but not exc 1000 Ltrs all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of following capacity.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete.

Material and labour for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long and joints shall be filled with the mixture of bitumen and sand in (1:3) by weight, complete all as specified and directed.

Demolition of brick and stone masonary work built in cement mortar incl all quions, arches, pillars etc. but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed.

Material and labour brick work with sub class ‘B’ modular bricks straight or curved o plan exc 6m mean radius built in cement mortar 1:4 all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Material and labour 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate, including finishing surface of concrete topping even and rough as in screed bed complete.

Material and labour for 15-18 mm thick green marble slabs on cooking platform/shelf/flooring etc. machine cut laid over and including cement screed 15mm thick in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting polishing, half round moulding and cutting of holes for gas pipe complete.

Material and labour for machine cut Kota stone slab 18-22 mm thick (of size not less than 55 cm x 55 cm in flooring and 120 cm x 25 cm in treads) laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including half round edge moulding, cutting, waste, rubbing and polishing (Granite finish) over and including cement screed bed 20 mm thick in cement mortar (1:4) base including rubbing and mirror polishing, complete all as specified.

Material and labour for light coloured Glazed ceramic tiles in vertical surfaces size 600 x 300 x 7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing for tiles. Make :- Johnson / Kajaria / Somany.

Material and labour Non skid coloured ceramic tiles 7 to 8 mm thick area of each tils exc.0.11 sqm but not exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed. Make :- Johnson / Kajaria / Somany.

Material & Labour for Vitrified light coloured tiles 8-9 mm thick ( square or rectangular) polished, area of each tiles not exc. 0.36 sqm, in floors etc. set and jointed with cement mortar and pointed in white or coloured cement to match over and with including 15mm thick screed bed or bedding layer with CM 1:4 all as spd and directed. Make :- Johnson / Kajaria / Somany.

Material & Labour for Vitrified light coloured tiles 8-9 mm thick of size 600 x 100 mm on polished on vertical faces of walls set and jointed with cement mortar and pointed in white or coloured cement to match over and including 10mm thick rough finished plaster in cement mortar (1:4) all as spd and directed.Make :- Johnson / Kajaria / Somany.

Material & labour for 20mm thick granite (of any type) work (table rubbed and polished)in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to matchwith shade of granite over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed.

Material and Labour for Preparation of old surfaces of walls, pillars cornices surfaces including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of white wash on walls complete all as specified and directed.

Material and Labour for Preparation of old surfaces of ceiling including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of white wash on ceiling complete all as specified and directed.

Material and Labour for applying one coat of oil bound distemper on walls, pillars cornices etc surface incl preparation of old plastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and incl filling necessary where required with putty as in patches or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed.

Material and Labour for subsequent coat of distemper oil emulsion ( White/ Ivory or any colour) over one coat applied under Srl item No 126 above.

Material and Labour for applying 1 mm thick weather coat Asian/Birla/JK wall care white putty in two layers including complete removal of existing treatment of internal or exxternal walls, roof projection, fins and fascia etc. with wire brush or any manual other mechanical method by manual and reaching upto old plastered surface complete all as specified and directed.

Material and Labour for applying one coat of cement base paint on walls, pillars cornices etc surface including Preparation of old treated surfaces (plastered or unplastered) by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorecent salts and trading oil and greasy spots including filling necessary where required with putty as in patches or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed. (Make :-Snowcem / Berger paint (Duracem)/ Nerolac paint /Asian Paints/Indigo Paints )

Material and Labour for applying two coat of cement base paint on walls, pillars cornices etc surface including Preparation of old treated surfaces (plastered or unplastered) by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorecent salts and trading oil and greasy spots including filling necessary where required with putty as in patches or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed. (Make :-Snowcem / Berger paint (Duracem)/ Nerolac paint /Asian Paints/Indigo Paints )

Material and Labour one coat of exterior emulsion paint white or tinted on old treated walls or fascia of roof or chajjas on prepared putty surfaces of bldg upto tripple storeys bldgs complete all as specified & directed. Note : Make :-Asian Paints (Brand-Ace)/ Berger paint (Brand -Walmasta) / Nerolac paint (Suraksha plus)

Material and Labour for one coat of exterior emulsion paint white or tinted on walls or fascia of roof or chajjas width between 10 cm to 20 cm on prepared putty surfaces or old painted surfaces of bldg upto tripple storeys bldgs including filling necessary where required with putty as in patches or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified & directed. Note : Make :-Asian Paints (Brand-Ace)/ Berger paint (Brand -Walmasta) / Nerolac paint (Suraksha plus)

Material and Labour two coat of exterior emulsion paint white or tinted on walls or fascia of roof or chajjas on prepared putty surfaces or old painted surfaces of bldg upto tripple storeys bldgs complete all as specified & directed. Note : Make :-Asian Paints (Brand-Ace)/ Berger paint (Brand -Walmasta) / Nerolac paint (Suraksha plus)

Material and Labour for applying one coat of synthetic enamel paint on wooden surfaces or wood based surfaces of any description, over 10cm in width or girth including preparation of old surfaces complete all as specified and directed. (Make: Asian Paint, Brands-Premium gloss enamel/Berger- Luxol High Gloss/Nerolac-Synthetic Hi- Gloss)

Material and Labour for applying one coat of synthetic enamel paint on steel surfaces of any description, over 10cm in width or girth including preparation of old surfaces complete all as specified and directed. (Make: Asian Paint, Brands-Premium gloss enamel/Berger- Luxol High Gloss/Nerolac-Synthetic Hi- Gloss)

Material and Labour for 15mm thick plaster in cement mortar 1:4 on fair faces of brick work or concrete surface, kerb stone and finishing the surface even and smooth (without using extra cement ) including taking down plaster of walls scrubbing down with water and dispose of dibries where directed by EIC, complete all as specified and directed incl WPC @ 200 ML per 50 kg cement bag or as per manufacture instructions Note : (i) WPC shall be measured and paid separately. (ii) Rendering upto 9 mtr ht shall be included in the quoted rate).

Material and Labour for 15mm thick plaster in cement mortar 1:6 on fair faces of brick or concrete surface and finishing the surface even and smooth (without using extra cement ) including taking down plaster of walls scrubbing down with water and dispose of dibries where directed by EIC, complete all as specified and directed.

Material and Labour for 10mm thick plaster in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surface even and smooth (without using extra cement ) including taking down plaster of walls scrubbing down with water and dispose of dibries where directed by EIC, complete all as specified and directed.

Supply only liquid water proofing compound, ISI marked complete all as specified and directed.

Material and labour for preparation of newly plastered surface of wall and applying two coats of cement base paint complete all as specified. (Make :-Snowcem / Berger paint (Duracem)/ Nerolac paint /Asian Paints)

Material and Labour for applying two coat of oil bound distemper incl preparation of newly plastered surfaces of walls, pillars cornices etc complete all as specified and directed.

Material and Labour for applying three coat of white wash on ceiling surfaces incl preparation of newly plastered ceiling surfaces complete all as specified and directed.

Material and Labour for repairing of RCC projection, Chajjas, Facia,Bands, Shelves, Beam, RCC railing, Balcony and similar works by dismantling of loose / disuntegrated portion of RCC at any height and in any situation floor including provn of support with chicken wire mesh and dubbing/filling with PCC (1:2:4) type B-0 using 12.5 mm graded aggregate 15 to 25 mm thick after applying cement slurry @ 3 kg/sqm finished even and smooth to desired shape and applying two coats of finished to match with existing surfaces complete all as specified and directed.

Material and labour for writing letters or figures (block, Roman, Italic or Indian exc 100mm and n.exc 300mm high for writing bldg Nos with synthetic enamel paint complete all as spd and directed.

Material and Labour for applying one coat of synthetic enamel paint on vent/waste CI pipe 80/100 mm bore with socket of any description upto tripple storey bldgs including preparation of old painted surfaces complete all as specified and directed.

Material and Labour for applying two coats glossy Indigo floor coat emulsion paint premium series or equivalent on existing old paver block/ chequered tiles foors any pattern including removing caked mud, trading oil and greasy spots, cleaning with water complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Material & Labour for point wiring complete with 1.5 sqmm single core multi stranded copper conductor PVC insulated unsheathed cable 1100 volts grade drawn through in concealed and PVC casing caping with all accessories as required and directed by Engr-in charge, fixed on the surface of Wall/ roof/ceiling / dash fasteners/ wooden gutties and cadmium plated screws as per IS on existing/new if required at site sunk type CI/GI Steel/Wooden terminal with suitable for regular/Modular boxes with 3 mm thick laminated sheet concealed in wall etc. including 1.5 sqmm unsheathed copper continuity conductor connected to common earth dolly for. (Make: Anchor/Havells/Polycab)

(a) One light point point controlled by one switch with cables 1.5 sq. mm size

(b) One fan/exhaust fan point controlled by one switch with cables 1.5 sq. mm size

(c) One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 sq. mm size.

(d) One 3 pin socket outlet, 5 Amps, independent, with cables 1.5 sq. mm size.

(e) One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables1.5 sq.mm. size.

(f) One power point with 2.5 sqmm copper conductor including 2.5 sqmm unsheathed copper continuity conductor connected to common earth dolly and controlled by one 15 Amp switch

(g) All as per items No 2 above for one point for (AC/geyser point ) with PVC insulated unsheathed FR cable, 1100 volt grade multy stranded copper conductor of size 4.00 sqmm (Nominal area ) including earth wire PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 4.0 sqmm (Nominal area ) cable common connected to earth dolly controlled by one switch complete all as specified and as directed by Engr-in-Charge.

Supply & Fixing Switch piano, flush type single pole, one way 6 Amp all as specified and directed.

Supply & Fixing bell push flush type single pole, 5 amps complete all as specified and directed.

Supply & Fixing Buzzer, Ding Dong AC. 230 volts, single pole.

Supply & Fixing switch piano flush type, single pole, one way 16 Amps complete all as specified and directed.

Material and labour socket outlet 2 in 1, 3 pin, 6A flush type complete all as specified and directed.

Material and labour socket outlet 2 in 1 ,3 pin, 5 Amps and 15 Amps flush type complete all as specified and directed.

Supply & Fixing inreplacement of Ceiling rose, 3 phase/PVC/polycarbonate, isolated body for complete all as specified and directed.

Supply & Fixing inreplacement of Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings

Supply & Fixing inreplacement of stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd. complete all as specified and directed.

Taking down old Sheet metal enclouser and supply and fix new sheet metal enclouser cubical type factory fabricated made out of 1.6 mm thick CRCA sheet with front side openable single door system powder coated painted to shade RAL 7032, PL Gasket, hinged single door, IP-55 mounting plate made out of 2mm thick CRCA sheet steel and earth bolts etc. of size 400x400x200mm all as speceified & directed by Engr-in- charge. Note :- Cost of any minor modification if required in fixing of the sheet metal enclouser as per site requirement and making good the disturbed surfaces matching with existing finish, will be deemed to be included in the cost of this item.

Dismantling, Supply & Fixing MCB distribution box double door powder coated sheet metal encloser 240 volts SPN including 200 amps rated bus bar of the following type.

(a) 12 ways

(b) 08 ways

(c) 04 ways

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of foour poles (TPN) and current carrying capacity 40 Amp to 100 Amp in the DB complete with connection testing and commissioning.

Supply and fixing SPN 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.

Disconnecting of unserviceable sub main wiring/Service connection of any size and including steel conduit and accessories & removing from site and making good the disturbed surfaces complete all as specified and directed.

Material and labour for wiring for circuit/submain wiring in PVC sonduit alongwith earth wire with the following sizes of 2x2.5 sq.mm + 1x2.5 sq.mm earth wire FRLS is PVC insulated copper conductor, single core cable in surface/recessed as required. Note : Two run of 2.5 sqmm cable with combined of R,Y & B and one run of 2.5 sqmm of Green colour in PVC conduit alongwith necessary clamp will be measured as one RM.

Material and labour for wiring for circuit/submain wiring in PVC sonduit alongwith earth wire with the following sizes of 2x4 sq.mm + 1x4 sq.mm earth wire FRLS is PVC insulated copper conductor, single core cable in surface/recessed as required. Note : Two run of 4.0 sqmm cable with combined of R,Y & B and one run of 4.0 sqmm of Green colour in PVC conduit alongwith necessary clamp will be measured as one RM.

Taking down U/S earth plug and Supply & fix new metal clad 20 Amp 230 volts single pole and earth enclosure with two pin and earth plug with socket complete with one single pole MCB of 20 Amp 10 KA all as directed by Engineer-in-charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as per directed by Engr-in-Charge.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of uitable size from ceiling rose complete all as per directed by Engr-in-Charge.

Supply & Fixing building security light LED 25 watts including 25mm dia GI pipe with 120 degree bend with all accesories including fitting with point wiring in casing caping, with PVC box and switch PTS and all as specified and directed by Engr-in-Charge.

Taking down old U/S exhaust fan, deposited to MES store and supply and fixing metal/PVC frame exhaust fan of size 150/200mm sweep 1280 RPM, air delivery 520 CMH, power input 28 W single phase 240 Volts connected complete all as directed.

Taking down old U/S exhaust fan, deposited to MES store and supply and fixing metal frame exhaust fan of size 250mm sweep with louver 1280 RPM, air delivery 520 CMH, power input 28 W single phase 240 Volts connected complete all as directed.

Taking down old U/S exhaust fan, deposited to MES store and Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers connected complete all as directed.

Taking down old U/S exhaust fan, deposited to MES store and Supply and fix exhaust fan, steel body AC single Phase. 230V of size 380mm sweep with, blades, and frame and louvers connected complete all as directed.

Supply & replacement of hanging clamp with rubber reel, nuts and bolts suitable for hanging of Ceiling Fan (any type, sweep and make) complete all as specified and directed by Engr-in-Charge.

Supply & fixing in replacement of PVC canopy for ceiling fan 1200/1400 mm sweep.

Supply & fixing in replacement of capacitor holder for ceiling fan 1200/1400 mm sweep.

Supply & fixed in replacement of capacitor of 2.5 MFD all as specified.

Dismantling carefully and fixing at the same place exhaust fan of any size and any shape with necessary iron frmae, nut, bolt including grounting, inserting fasters as suitable size including inserting of wood duly making hole as per existing exhaust fam frame all as specified and directed by Engr-in-Charge.

Taking down old unserviceable GI pipe and supply and laying new GI pipe 20 mm dia medium grade incl all GI pipe fittings, for solar water heating system/Geyser of size ltrs/50 ltrs etc. complete all as specified.

Taking down old unserviceable GI pipe and supply and laying new GI pipe 25 mm dia medium grade incl all GI pipe fittings, for solar water heating system/Geyser of size 25 ltrs/50 ltrs etc. complete all as specified.

Supply and replace Ball valves of size 20 mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms) (Make : Prayag/Polytuff/Pearl)

Taking down & hanging geyser of cap 25 ltrs/50 ltrs incl grouting of bolts 10mmx150mm long with cement including making good and matching existing surgace and finish all as directed.

Material & Labour for repair to inner tank of geyser cap 25/50 ltr complete taking down the geyser opening outer cover and taking out inner tank soldering/ welding/breezing the tank, testing with filling water, reassembling the geyser complete and fixed on position all as directed

Material & Labour for supply and replacement of glasswool for geyser cap 25/50 Ltr complete opening the geyser taking out old U/S glass wool and replace with new glasswool reassembling and fixed on position all as directed

Material & Labour for replacement in repairs stop valves cast copper alloy screwed down high pressure with fancy type cromium plated 15mm dia bore both ends screwed.

Supply and replace Heavy duty PVC connection with SS nuts and washer suitable for hot water, complete of size15mm dia x 45cms long all as directed

ditto as per item No 20 but 600mm long

Supply and replace heating element ISI marked of suitable type as per existing including rubber ring clamping screws etc complete of 1.5/2.0 KW

Supply and replace themostatic switch ISI marked for geyser as per existing of range 15-65 degree temparature

Supply and replace syphonic assembly for geyser as per existing size and suitable for surya geysrs 25 ltrs capacity

Supply and replace heating element suitable for surya geysers round type including rubber ring clamping screws etc complete of 1.5/2.0 KW.

Supply and fixing in replacement of unsevicebale indicating lamps for geysers of Bajaj/Veenus/Ditz/Sphare hot/Sidhson or any other make complete all as specified and directed by engineer-in-Charge.

Supply and replace vacuum release valve on inlet side of geyser

Supply and replace brass chromium plated horizontal/vertical non return valve of size 15mm dia bore ISI marked on inlet side of geyser.

Supply and replace pressure release valve complete

Supply and replace ISI Marked pressure switch of on line Booster/Pressure pump single phase for existing make and capcity complete all as specified and directed by engineer-in-Charge.

Supply & Replace 3 Pin Plug top 15 Amp

m/s sharma constructions

SNEH CORPORATION