NIT.NO.25,ITEM NO.20

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. DSR 2018 (1.2)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. DSR 2018 (1.31)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. DSR 2018 (1.32)

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. DSR 2018 (1.12)

Supplying and fixing brass batten/ angle holder including connections etc. as required. DSR 2018 (1.34)

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. DSR 2018 (1.26)

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. DSR 2018 (1.25)

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. DSR 2018 (1.44)

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. DSR 2018 (1.41)

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire. DSR 2018 (1.14.2)

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) DSR 2018 (2.4.1)4 Way (4+12) Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required, Single pole. DSR 2018 (2.10.1)

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required 63 A. DSR 2018 (2.12.2)

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. DSR 2018 (5.4)

S/o 18±5% Watt LED tube light batten fitting make: Havells/ Crompton/ Bajaj/ Philips / Orient.

S/o ceiling fan, 1200 mm sweep make: Havells / Crompton / Orient

Making and Supply of M.S. cover made out M.S. Angle 40 x 40 x 5mm with centre supporting same angle and top side cover with M. S. chequered sheet minimum 3mm thickness duly welded with opening arrangement with heavy duty single hinges with handle The sizes of UGR cover for each BPS are given below:-25 sq feet - 2 Nos. = 50 Sq

Dismantling of old damaged UGR Cover & Fixing of new cover as above including Civil work with the help of cutting hammer machine and filling with cement and concrete shuttering material along with labour, tool and tackles etc.

Painting the complete angle, Cover (External & Internal Side), and hinges with Red oxide paint and enamel black paint at per site requirement

S/O Energy saving environmental friendly, long life, exclusive innovative pressure die cast aluminum bay light with high power LED as light source 72±5% watt LED light fitting etc. complete as required for fixing on the wall. Make: Bajaj / Havells / Philips

S/O 40 mm dia G.I. pipe of 1 meter length with 1500 angle band, suitable for fixing of 72±5% watt LED street light along with clamp, Nut & Bolt etc.

Installation Testing & Commissioning of 72±5% watt street light, wiring, connect with MCB with grouting of bolt at walls etc

Swarn Engineers

HYDROCON ENGINEERS

M/S BRIJ BHUSHAN SHARMA