REPAIRS TO CERTAIN ROADS AND ROAD FURNITURE IN DOMESTIC X AREA AT AFS AMLA AMLA

Amount

Material and labour for 75 mm thick, moorum/red bajri as in berms spread, rolled and consolidated to gradient and camber required complete all as specified and directed.

Material and labour for scarifying or picking existing graveled macadam or bituminous macadam surfaces in area not exc 400 sqm and depth exc 50mm but not exc 100mm deep and removing of debris from site to a distance not exceeding 50mtr complete all as specified and directed.

Material and labour for preparing black top surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with mechanical air compressor to remove all loose dirt etc., complete all as specified and directed.

Material and labour for repairs to unleveled surfaces, depression, road side cuts etc., by filling premixed bituminous macadam using VG-30 paving bitumen @ 4% by weight to total mix in unleveled surfaces, depression, road side cuts etc .laid, rolled and compacted to required gradient and camber with 8 to 10 tone power roller (consolidated thickness of 75 mm or less) and laid by mechanical paver complete all as specified and directed Note:- Priming/tack coat shall be measured and paid separately.

Material and labour for applying evenly a tack coat with cold cationic rapid setting emulsion (oil based cold cationic primer only) RS-I primer @ 3Kg/ 10 Sqm on existing black top surfaces confirming to IS-8887-2004 and specification as per MoRTH using mechanical sprayer after cleaning of existing surface all as specified and directed.

Material and labour for applying evenly a prime coat of cold cationic Bitumen emulsion SS-1 confirming to IS-8887-2004 at a rate of application 1KG/sqm on surface of WMM/WBM as specified in Table 500-3 of MoRTH, using mechanical sprayer after cleaning of existing surface all as specified and directed.

Material and labour for 150mm thick (compacted thickness in two layers , each layer of 75 mm thick) WBM with coarse aggregate granite, trap or basalt of grading 3 (50 to 20mm size) spread, rolled and consolidated to gradient and camber required all as specified and directed.

Material and labour for bituminous premix semi dense asphaltic concrete 30 mm thick (consolidated thickness), using graded crushed stone aggregate premixed with binder (paving grade bitumen VG 30 grade) @ 5.5% binder content by weight of total mix & hydraulic lime filler, rolled and compacted to required camber and gradient complete all as specified and directed.

Material and labour for repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc., cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed.

Supply and Fixing in repairs solar road studs aluminum alloy shall (100% water proofing of size 125mmx125mmx25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-cd rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10000 to 18000 mcd as per recommended by the manufacturer complete all as specified and directed.

Material and labour for cleaning the road surface of all dirt seals oil, grease and foreign material and applying 2.0 mm thick painting lines, dashes arrows, letters etc on roads pavements and the like exc 10cm wide with road marking paint, white or golden yellow, paint applicator machine fitted with profile shoe , glass beads dispenser, propane tank heater and profile shoe heater driven by experienced operator on road surface including cost of T&P etc complete all as specified and directed.

Supply and fixed in repairs metal tubular dealineater made out of ABS round body fitted with 2 Nos 65MM dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermoplastic elastomer 3 bands of green, red and yellow reflector radium tape of 25mm wide strip with anti theft steel net for reflector protection including embedding in cement concrete type B-1, 1:2:4 (150 x 150 x 300mm) all as specified and directed.

Supply and fixed repairs road convex mirrors outdoor type made of one piece polycarbonate of size 80 cms including all fixing arrangements, mounting pole and necessary foundations complete all as specified and directed. Note: The convex mirror supplied by the contractor shall conform to relevant road safety standard.

Supply and fixed in repair ABS plastic body cat eye 101x 90x 16 mm size dynamically designed very high impact strength and fixed with 02 Nos. Reflective reflector old cat eye complete all as specified and directed.

Supply and fixed in repairs Speed breaker rumble strips dual directional made fo ABS material size 425 x 50 x 500mm. Two highly reflective reflectors moulded in PMMA material arc welded with ABS plate through ultrasonic welding process and then fixed on to the speed breaker so that dust and water cannot touch reflectors inside and thus it maintains its reflectivity for a long time complete all as specified and directed.

Fabricating , supplying and fixing retro reflective Overhead informatory road signage and boards made up of 2mm thick aluminium sheet (size not less than 900 x 900mm) face to be fully covered with high intensity and encapsulated lens type heat activated , retro reflective sheeting conforming to type -III of ASTMD 4956-01 as approved by Engineer-in-charge , letters borders etc as per IRC 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivet or bolts & nuts@300 mm centre to centre all along the periphery as well as in two vertical rows alongwith theft resistant measures including the cost of painting with two coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete all as specified and directed. Note:- MS plate and structural frame work shall be measured and paid separately under relevant items of this schedule but the cost of excavation and earthwork in any type of soil is inclusive in quoted rate.

Supply and Fixing steel work in tubular works (round or square) incl special shaped washer etc complete using ERW or induction butt welded tubes as in vertical posts, trusses, purlins etc complete all as specified and directed.

Material and labour for PCC 1:2:4 type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed

Material and labour for two coats of synthetic enamel paint and including a coat of red oxide primer over new steel surfaces of any description not otherwise described over 10cm width or girth including preparation of surface complete all as specified and directed

Note:- The amount of schedule of credit on page No. 27 shall be deducted from the amount quoted against sch 'A' while deriving at the contract sum for acceptance.

pyarelal galar

Vee kay construction