REPAIR REPLACEMENT OF PLUMBING SANITARY FITTING AND CONNECTED WORKS FOR 509 ABW MIL WING SP LINE GWL ROAD KB LINE GE OFFICE ARO MP LINE ETC UNDER AGE BRII OF GE East Agra

Amount

Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and directed by the Engineer-in-charge.

Refixing only old GI tubing 15mm bore pipe and connection in new or old position as on walls, ceiling, floors, etc.complete all as specified and directed by the Engineer-in-charge. (i) Cleaning of pipe is included in ser No. 01 here-in-before. (ii) Rates quoted by the contractor deemed to be included S&F new fittings as required.

S&F 15 mm bore Galvanized Steel tubes, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by the Engineer-in-charge. (Make : Tata/Jindal/Prakash (ISI marked)

Taking up or down 20 mm bore steel tubing/ PPR pipe and connections, including cleaning for Refixing or removal to store complete all as specified and directed by the Engineer-in-charge.

Refixing only old GI tubing 20mm bore pipe and connection in new or old position as on walls, ceiling, floors, etc complete all as specified and directed by the Engineer-in-charge. (i) Cleaning of pipe is included in ser No. 04 here-in-before. (ii) Rates quoted by the contractor deemed to be included S&F new fittings as required.

S&F 20 mm bore Galvanized Steel tubes, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by the Engineer-in-charge ( Make : Tata/Jindal/Prakash (ISI marked).

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning for issue under schedule of credit measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed by the Engineer-in-charge.

Refixing only 110 mm bore PVC (SWR) Soil waste, rain water pipe and vent pipes single socketed in any length with rubber ring joints fixed to walls etc. as per site requirement and making good disturbe portion to match the existing complete all as specified and directed by the Engineer-in-charge. Note:- Pipe obtained from item No 7.00 shall be re-used.

S&F 110 mm bore PVC (SWR) Soil waste, rain water pipe and vent pipes single socketed in any length with rubber ring joints fixed to walls etc. as per site requirement making good disturbe portion to match the existing complete all as specified and directed by the Engineer-in-charge.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed by the Engineer-in-charge.

S&F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches etc. as per site requirement making good disturbe portion to match the existing complete all as specified and directed by the Engineer-in-charge.

S&F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls etc. as per site requirement making good disturbe portion to match the existing complete all as specified and directed by the Engineer-in-charge.

S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed by the Engineer-in-charge.

Refixing in repair 40mm bore Low density polyethylene pipes (LDPE) to walls, ceilings or in floors etc. making good disturbe portion to match the existing (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed by the Engineer-in-charge.

S&F in repairs 500 litres capacity three layer Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PVC float valve complete all as specified in SSR Part I as directed by the Eng in charge.

S&F in repairs three layer Rotational moulded polyethylene water storage tanks with cover & 20mm PVC float valve (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I (Capacity in litres 1000) complete all as specified and directed.

S&F in repair 20 mm dia PVC float Valves high pressure, with polythene float and fly nut complete, screwed for Iron pipe or brass ferrule complete all as specified and directed by the Engineer-in-charge.

S & F of 01mm thick galvanised steel sheet water tank cover suitable for 500 and 1000 ltr water tank fixed with machine screw etc complete all as specified and directed.

S&F in repairs Vitreous China wash hand basin white flat back size 550x400mm including brackets , PTMT west cupling and 32 mm pvc flexible waste pipe 800mm long etc complete all as specified and directed by the Engineer-in-charge.

S&F, Pillar taps cast copper alloy fancy type with capstan heads chromium plated scrwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for 15 mm dia iron pipe complete all as specified and directed by the Engineer-in-charge.

S&F in repair Angle cock 15mm PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 90 gms).complete all as specified and directed by the Engineer-in-charge.

S&F in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and PVC connections 15mm size with PTMT nuts of length 450mm inlcuding taking out of old unserviceable connections etc, connecting up new and making good disturbe portion complete all as specified and directed by the Engineer-in-charge

S & F in repairs Waste coupling of PTMT (half or full threaded) 40mm dia of discharge pipe (Minimum weight 60 gms) suitable for stainless steel sink complete all as specified and directed.

S & F in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed by the Engineer-in-charge.

S&F in repairs 32 mm PVC flexible waste pipe 800mm long etc complete all as specified and directed by the Engineer-in-charge.

S&F in repairs Pillar taps of PTMT 15 mm dia bore of pipe any colour high pressure screwed for iron pipe fancy type (Minimum weight 15mm-120gms) complete all as specified and directed by the Engineer-in-charge.

S&F in repairs bib tap standard of PTMT 15 mm dia bore of pipe any colour high pressure screwed for iron pipe and fixed fancy type, (Minimum weight 15mm-105gms) complete all as specified and directed by the Engineer-in-charge.

S&F in repairs 15mm bore CP stop cock, cast copper alloy fancy type, screwed down high pressure, screwed for iron pipe or for unions and fixed complete all as specified and directed by the Engineer-in-charge.

S&F in repair kitchen sink with draining board made of stainless steel 1mm thick with sink coupling & waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x160 mm complete all as specified and directed by the Engineer-in-charge.

Supply & fixing in repair CP tubular towel rail, 60 cm long, 20mm bore, chromium plated complete all as specified & directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (squre/ rectangular) area of each tiles exc 0.06 sqm but n. exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tiles over 15mm thick screed bed in CM 1:6 complete all as specified and directed by the Engineer-in-charge.

M&L for glazed ceramic coloured tiles of size 300x200x7mm thick fixed over and including 10mm thick plaster in CM 1:4 on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by the Engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

S & F in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed by the Engineer-in-charge.

S&F in repairs flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed.

S & F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement (Diameter of outlet 75mm), jointing to waste pipe and fixed in cement concrete 1:2: 4 (type B1) mixed with pedilite water proofing liquid @ 200ml in 50 kg cement, inlcuding taking out of old unserviceable connections etc, connecting up new and making good disturbe portion complete all as specified and directed by the Engineer-in-charge

S&F in repairs vitreous China squatting pan (Orissa pattern), white, of size 580x440mm white, with 'P' or 'S' trap, integral foot rests including flush pipe, trap, lime concrete bedding inlcuding taking out of old lime concrete bedding, unserviceable connections etc connecting up new and making good disturbe portion complete all as specified and directed by the Engineer-in-charge

S & F in repairs Flushing jet(health faucet) for pedestal pattern WC incl. flexible pipe and Brass Chcomium Plated nuts and blots and water pipe of size 1150 mm long & fixed complete all as specified and drected.

Supply & fix in repairs CP Central hole basin mixture screwed for 15 mm dia pipes including PVC connection etc complete all as specified and directed.

S&F in repair stop cock, (Concealed type) cast copper alloy, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket or PPR pipe etc making good disturbed portion complete all as specified and directed.

S&F in repair bib taps, cast copper alloy, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket or PPR pipe etc (Concealed type) making good disturbed portion complete all as specified and directed.

M&L for rectifying lekage of concealed PPR/GI pipe at any height from inside/ out side of building including replacing broken fittings and pipe as per site requirement and making good disturbed portion complete all as specified and directed.

S&F in repair stainless steel plate rack of size 31"x30"x10" fixed to wall complete all as specified and as directed.

Disconnecting existing tanks, setting aside (or lowering if required) including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc, and hoisting if required reconnecting and re-fixing in position including replacement of damaged fittings etc complete all as specified and directed.

S&F in repairs 100 mm bore cast iron soil, waste vent sand cast pipes in any length with or without ears, with cement joints fixed to walls including making good disturbe portion to match the existing complete all as specified and directed by the Engineer-in-charge.

S&F in repairs 100 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access doors and cement joint including making good disturbe portion to match the existing complete all as specified and directed by the Engineer-in-charge.

S&F in repairs 100 mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors and cement joint including making good disturbe portion to match the existing complete all as specified and directed by the Engineer-in-charge.

S&F in repairs 75 mm bore cast iron soil, waste vent sand cast pipes in any length with or without ears, with cement joints fixed to walls including making good disturbe portion to match the existing complete all as specified and directed by the Engineer-in-charge.

S&F in repairs 75 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access doors and jointed with cement joint including making good disturbe portion to match the existing complete all as specified and directed by the Engineer-in-charge.

S&F in repairs 75 mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors and cement joint including making good disturbe portion to match the existing complete all as specified and directed by the Engineer-in-charge.

M/S Oberoi Construction Co.

M/S SUMESH FURNITURE

GIRENDRA SINGH AND CO

M/S R.K. ENTERPRISES

SHRI SAINATH ENGINEERS

m/s shanti consruction co

M/s K S Builders

virendera singh

M/s P.N.C. Engineers