SPECIAL REPAIRS TO WATER PIPELINE IN ADMINISTRATIVE AREA OF 11 FOD AT BATHINDA MIL STN

Amount

Excavation in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for pipe line etc. not exceeding 10 sqm area on plan and not exceeding 1.5 metre in depth and getting out in soft / loose soil complete all as specified.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified.

Removing excavated soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified.

Taking out from trench existing old rusted / corroded CI/DI pipe of size 150 mm bore spigot and socketed ends ( including all fittings) and lead joints incuding burning out joints and recovering lead including bailing out dirty / muddy water if necessary complete all as directed.

Supplying, laying, jointing, commissioning & testing DI pipes with rubber gasket tyton push on joints of spigot and socket ends centrifugally cast (spun) class "K-7" confirming to IS -8329-2000 in any length of size 150mm bore laid in trenches complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing DI fittings specials bend of size 100mm dia complete all as specified and as directed by Engineer -in-Charge.

Supply and fixing DI fittings specials tees of size 100mm dia complete all as specified and as directed by Engineer -in-Charge.

Supply and fixing DI fittings specials flanged socket of size 100mm dia complete all as specified and as directed by Engineer -in-Charge. Note :- Make of DI special fittings must be same as make of DI pipe or recommended by manufacturer of pipe

Taking out from trenchs / from under roads existing old unservicable rusted / corroded GI pipe 100 mm bore and connections including all fittings complete all as specified and as directed.

All as per serial item No. 11 above but for GI pipe of 80 mm bore.

All as per serial item No.11 above but for GI pipe of 50 mm bore.

All as per serial item No. 11above but for GI pipe of 25 mm bore.

All as per serial item No.11 above but for GI pipe of 20 mm bore.

Supplying, Laying, jointing and testing of Steel water tubing 100 mm bore ISI marked medium grade galvanised including tube fittings Viz Tees, Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road complete all as specified and directed.

All as per serial item No. 17 above but for GI pipe of 80 mm bore.

All as per serial item No. 17 above but for GI pipe of 50 mm bore.

All as per serial item No. 17 above but for GI pipe of 25 mm bore.

All as per serial item No. 17 above but for GI pipe of 20 mm bore.

Taking down from walls / ceilings/ laid in floors existing old unservicable rusted / corroded GI pipe 25 mm bore and connections including all fittings complete all as specified and directed.

All as per serial item No. 23 above but for GI pipe of 20 mm bore.

All as per serial item No. 23 above but for GI pipe of 15 mm bore. Note for serial item No. 23 to 25: The quoted rate against these items are deemed to be included for sorting out and stacking serviceable GI pipes for relaying / reuse under respective item from the unserviceable pipes.

Supplying, Laying, jointing and testing of Steel water tubing 25 mm bore medium grade, galvanised, ISI Marked including tube fittings Viz Tees, Socket bends elbows, union nipple etc screwed and socketed joint fixed to walls, ceiling or under floors etc complete all as specified and directed.

All as per serial item No. 26 above but for GI pipe of 20 mm bore.

All as per serial item No. 26 above but for GI pipe of 15 mm bore. Note for serial item No. 26 to 28 The cost of new GI fittings are included in these items and nothing extra shall be paid on this account.

Supply and fixing in repair Gun metal globe or gate valve for 50 mm bore iron pipe , with iron wheel head, screwed both ends conforming to IS 778 - 1984 complete all as specified and directed.

Supply and fixing in repair Gun metal globe or gate valve for 25 mm bore iron pipe , with iron wheel head, screwed both ends conforming to IS 778 - 1984 complete all as specified and directed.

Supply and fixing in repair Gun metal globe or gate valve for 20 mm bore iron pipe , with iron wheel head, screwed both ends conforming to IS 778 - 1984 complete all as specified and directed.

Supply and fixing in repair Gun metal globe or gate valve for 15 mm bore iron pipe , with iron wheel head, screwed both ends conforming to IS 778 - 1984 complete all as specified and directed.

Supply and fixing in repair PVC gate valve for 32mm bore PVC pipe, with PVC lever complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair 80 mm dia flanged sluice valve , ISI marked PN 1.0 confirming to IS-14846-2000, both end flanged ,drilled , stainless steel spindle and iron wheel handle , CI gate with MS ring including jointing material such as nuts, bolts, washers and rubber sheet complete all directed.

Supply and fixing in repair 100 mm dia flanged sluice valve , ISI marked PN 1.0 confirming to IS-14846-2000, both end flanged ,drilled , stainless steel spindle and iron wheel handle , CI gate with MS ring including jointing material such as nuts, bolts, washers and rubber sheet complete all directed.

Supply and fixing in repair 150 mm dia flanged sluice valve , ISI marked PN 1.0 confirming to IS-14846-2000, both end flanged ,drilled , stainless steel spindle and iron wheel handle , CI gate with MS ring including jointing material such as nuts, bolts, washers and rubber sheet complete all directed.

Material and Labour for Construction of valve pit Type 'B' of size 120 cm x 120 cm x 120 cm ( internal dimension ) of brick masonry built in cement mortar (1:4). from the top of surface including cover of MS sheet 3.15 mm thick and MS frame made of angle iron of size 50 mm x 50 mm x 6 mm with hinges, handle and locking arrangement including painting with two coats of synthetic enamel paint over a coat of red oxide primer and grouting in PCC (1:2:4) type B-1, using 20 mm graded crushed stone aggregates , Rendering 15 mm thick in cement mortar (1:3), including three coats of white wash on internal surfaces and external exposed surfaces , foundation concrete (1:3:6) type C-2 using 40 mm graded crushed stone aggregates including necessary earthwork , returning filling , removal including demolition the existing valve pit complete all as specified and shown on drawings. Note : Applicable drawing for valve pit is Drawing No. BTD-811 sheet 1/2 to 2/2

Taking out from trenchs / from under roads existing old unservicable PVC water tubing 32 mm bore and connections including all fittings complete all as specified and as directed.

Supply, Laying, Jointing and testing of PVC water tubing 32 mm bore ISI marked including tube fittings Viz Tees, Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road complete all as specified and directed by Engineer-in-Charge.

SS CONSTRUCTION

M/s Kataria Construction Company

VISHAV CONSTRUCTIONS