Civil&StructuralWorksVVSPLIPS3

MANUAL EXCAVATION UPTO — MANUAL EXCAVATION UP TO 1.5 METER: MANUAL EXCAVATION ON THE PIPELINE IN ALL TYPES OF SOILS UP TO A DEPTH OF 1.5 METER, INCLUDING OBSERVING ALL NECESSARY PRECAUTIONS, SHORING, SHUTTERING, TOOLS, TACKLES, DE-WATERING, MANPOWER ETC, ALL COMPLETE AS PER INSTRUCTIONS OF SITE ENGINEER, THE EXCAVATED SOIL IS TO BE STACKED IN HEAPS AT A DISTANCE OF AT LEAST 1.5 METER OR THE DEPTH OF THE TRENCH, FROM THE EDGE OF THE TRENCH, PART OF THE EXCAVATED SOIL MAY BE SAFELY DISPOSED OFF, AS PER THE DIRECTION OF ENGINEER-IN- CHARGE, THE SIDES OF THE EXCAVATION MAY BE CUT SLOPING OR SHORTED AND STRUTTED TO HOLD THE FACE OF EARTH, SOIL CONDITIONS, AND AS DIRECTED BY THE ENGINEER-IN-CHARGE, NO SEPARATE PAYMENT WILL BE MADE FOR THIS, PIPELINE WILL BE LOCATED BY HPCL, MANUAL EXCAVATION HAS TO BE CARRIED OUT BY EMPLOYING SUITABLE NUMBER OF LABORERS, DUE CARE SHALL BE TAKEN TO PREVENT ANY DAMAGE TO THE PIPELINE AND ANY OTHER CABLES/UTILITIES.

PCC 1:3:6 — PROVIDING AND LAYING IN POSITION CEMENT CONCRETE OF SPECIFIED GRADE INCLUDING THE COST OF CENTERING AND SHUTTERING FOR ALL WORK AT ALL LEVELS AND LOCATIONS ALL COMPLETE AS PER SPECIFICATION AND DIRECTION OF ENGINEER-IN-CHARGE. 1:3:6 (1 CEMENT : 3 COARSE SAND : 6 GRADED STONE AGGREGATE 20MM NOMINAL SIZE)

STRUCTURAL STEEL — FABRICATION ,ERECTION AND FIXING OF STRUCTURAL STEEL, GRATING, CHEQUERED PLATE, HANDRAIL ETC MEMBERS TO COMPLETE CONSTRUCTION OF SHED, PLATFORM ETC OR WHEREVER AS DIRECTED BY HPCL. JOB ALSO INCLUDES PAINTING OF ALL STRUCTURAL STEEL AFTER SURFACE PREPARATI

SPLY AND FAB OF GRATING — HOT DIP GALVANIZED GRATINGS FOR STAIRWAY, TANK FABRICATION, SUPPLYING, FABRICATING, ERECTING, ASSEMBLING, FIXING, WELDING AS PER THE ENCLOSED SPECIFICATION/SHEET/FABRICATION DRAWINGS. ALL THE STRUCTURAL (INCL. CURB ANGLE, WIND GIRDER, SPIRAL STAIRWAY, HAND RAILING, SPLASH PLATES, BRACKETS; STRUCTURAL SUPPORTS; ROOF STRUCTURE(TRUSS, RAFTERS) ETC.) AND ALL ATTACHMENTS AND FASTENERS SUCH AS NUTS AND BOLTS; DOUBLE WASHERS; CLEATS ETC. AS PER SPECIFICATIONS. NOTE:NUTS; BOLTS; DOUBLE WASHERS; CLEATS SHALL NOT BE MEASURED FOR THE PURPOSE OF THE PAYMENT BUT IS INCLUDED UNDER THE SCOPE OF WORK OF THIS ITEM. ALL THE STRUCTURAL SECTIONS SHALL BE APPROVED MAKE OR EQUIVALENT (AFTER PRIOR APPROVAL FROM HPCL). RATE SHALL BE QUOTED IN KILOGRAMS (KG) OF STEEL SUPPLIED BY THE VENDOR.