Construction of Barracks with 50 beds with development works for Armed Reserve Police at Thiruvannamalai District.

Amount

E0001: Earth work excavation for foundation in all soils (including refilling) a) 0 to 2m depth.

E0003: Earth work excavation in Soft disintegrated rock (including refilling) a) 0 to 2m depth.

E0005: Earth work excavation for Open Foundation (Excluding Refilling). a) 0 to 2m depth.

E0006: Earth work excavation for Open Foundation for drains in all soils (Excluding Refilling) a) 0 to 2m depth.

RE0006: Providing Pre-Constructional Antitermite treatment

F0040: Supplying and filling in foundation and basement with filling crushed stone sand

F0006: Supplying and filling with 40mm size Hard broken stone jelly in foundation and basement and other similar works including cost of materials

F0007: Supplying and filling with 20mm size Hard broken stone jelly in foundation and basement and other similar works including cost of materials

F0026: Filling in foundation and basement and other similar works with Excavated earth

F0013: Supply and filling in foundation and basement with gravel

CSMP0002: Plain cement concrete 1:5:10 (One of cement, five of crushed stone sand and ten of hard broken stone Jelly including Mortar Plasticizer

CSMP0003: Plain cement concrete 1:2:4 (One of cement two of crushed stone sand and four of Hard Broken Stone jelly)

CSMP0004: Plain cement concrete 1:8:16 (One of cement, eight of crushed stone sand and sixteen of broken brick jelly including Mortar Plasticizer

C0049: Precast cement concrete Jally ventilator using standardised concrete mix M20 a. In Ground Floor

C0065: Providing and Laying in position, standardised concrete mix m-20 grade a. In Foundation and Basement

b. In Stilt/ Ground Floor

c. In First Floor

d. In Second Floor

C0055: Supplying and fixing Monolithic RCC door frames of size 100x75mm with one edge groove size t x 20 mm (t represents the shutter thickness) using standardised Concrete mix M20 without vibrating including cost of steel and fabrication of reinforcement grills a. 1000 x 2100 mm

C0020: Providing Rain water harvesting pit Providing pit

C0020.a. b) Augering 30cm dia

CSMP0001: Supplying and fixing of fibre mixed precast slab of 50mm thick of all required shapes made in cement concrete 1:3:6 used including cost of all materials, moulding, curing, transportation, laying, pointing etc., for approach road,pavement slab and other similar works etc., complete as per the relevant standard specifications and as directed by the departmental officers.

BMP0006: Brick work in Cement Mortar 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) Foundation and Basement.

BMP0007: Brick work in Cement Mortar 1:6 (One of cement and six of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Kiln burnt country bricks of size 8¾”x4¼”x2¾” a. Ground Floor

b. In First Floor

c. In Second Floor

BMP0008: Brick partition wall in Cement Mortar 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 110mm thick for super structure in the following floors using Kiln burnt country bricks of size 8¾”x4¼x2¾” a. In Foundation and basement

b. In Stilt / Ground Floor

c. In First Floor

BMP0009:Brick partition walls 70mm thick using Kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) in cement mortar 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) a. In Stilt / Ground Floor

b. In First Floor

c. In Second Floor

BMP0010: Brick work in cement mortar 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in foundation and basement a.In Ground Floor/Stilt floor

b. In First Floor

FL0003: Supplying and fixing of 20mm thick bituminous expansion joint filler pad of approved quality

FLMP0001: Flooring with a bed of CC 1:5:10 (one of cement, five of crushed stone sand and ten of hard broken stone jelly including Mortar Plasticizer (Liquid) at 200ml per bag) using 40mm size hard broken stone jelly

FLMP0002: Plastering the top of flooring in CM 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FL0024: Finishing the top of flooring with cement concrete 1:3 (One of cement and three of blue granite chips of size 10mm and below) 20 mm thick Ellispattern Flooring (No Sand)

FL0025: Weathering course with concrete broken brick jelly 20mm gauge

FLMP0004: Finishing top of roof with one course of Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in CM 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag,) 12mm thick mixed with Water proofing compound at 2%

FLMP0005: Supplying and fixing of Colour glazed tiles (Best approved quality and the same shall be got approved from the Executive Engineer before using) over cement plastering in CM 1:2 (One of cement and two of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick

FLMP0006: Supplying and fixing of colour Ceramic Tiles Anti skid without corrugated design for flooring and other similar works (Best approved quality, colour and shade shall be got approved from the Executive Engineer before using) over cement mortor 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FLMP0010: Supplying and fixing of Ivory colour Vitrified Tiles of size 59.5x59.5cmx10mm for flooring and other similar works (Best approved quality, colour and shade and the same shall be got approved from the Executive Engineer before use) in cement mortar 1:3 (one of cement and three of curshed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FLMP0011:Supply and laying superior variety Concrete Designer tiles for flooring in CM 1:3 (One of Cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FW0004: Providing Form work and centering for reinforced cement concrete works a. For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc.,

b.Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works

c.For Square and rectangular columns and small quantities such as sunshade, parapet cum drops window boxiing, fin projection and other similar works.

d.For vertical walls (sump)

f.Curved surface

PLMP0001: Plastering with CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick

PLMP0002: Plastering with CM 1:4 (one of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick

PLMP0003: Special ceiling plastering in cement mortar 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick

PLMP0004: Plastering in cm 1:3 (one of cement and three of crushed stone sand (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm tk. mixed with water proof compound at 2%

PLMP0005: Plastering in CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick for border finish in all floors a) 150mm wide border

b) 75mm wide border

c) 50mm wide border

PA0001: White washing three coats using clean shell lime slaked

PA0022: Painting the new wood work with two coats of approved first class synthetic enamel

PA0026: Painting the new Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with two coats

PA0032: Supplying and applying of Full putty one coat with aproved make wall putty for smooth finishing the new cement plastered walls

PA0037: Painting two coats with ready mixed PLASTIC EMULSION PAINT of first class quality paint of approved colour and shade including a priming coat on cement

PA0042: Painting two coats with ready mixed EXTERIOR EMULSION PAINT

PA0037.a: Painting the ceiling with one coat plastic emulsion paint incl. primer

PA0027: Providing wooden ( Melamen Door ) Polish for new wood by removing by blade scrapping the exisiting dirt

J0001: Supplying and fixing of Teak Wood wrought and put up for frames of doors a) Teak wood over 2.00 metre and below 3 metre length

b) Teak wood below 2.00 metre length

J0021: Supply and fixing of best approved superior variety Magnetic door catches

J0029: Supplying of Mild steel hold fasts horizontally twisted of size 230x40x4mm

JV0022: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators

JW0042: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type

JW0044: Supplying & Fixing in position of UPVC Sliding windows

JD0095: Supply and Fixing of 25mm (+/- 1mm) thick WPC Decora Door which is extruded as a single core door with Lead-Free compound. The door is suggested to be hinged to the WPC frame of size 75 x 50mm with minimum of 5 inch butt hinges of SS including cost of WPC door frame, shutter, SS cylindrical lock and door closer and labour charges etc., complete complying with standard specifications and as directed by department officers. (The brand should be got approved from the Executive Engineer before use.)

JW0007: Supplying and fixing of best Indian Teak wood openable French window of following size having single bay openable with frame made up of TW scantling 75 mm x 37.50 mm (verticals- 2 nos. and horizontals – 2 nos. top & bottom) c) 1.00 x 1.95m

JD0098: Supplying and fixing of best Indian Teak wood paneled door of Double leaves shutters with brass fittings a) Double leaf suitable for door size 1800mm x 2100mm

JD0059: Supplying and fixing of Single leaf Solid core flush door shutters Suitable for Door of size c) 1000 x 2100 mm

GR0001: Supplying and fixing Mild Steel grills as per the design approved to verandah enclosure

RE0005: Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry)

CS0012: Providing Cuddappah slab of 20mm thick, finishing with two sides for cupboard (a) In Ground Floor

(b) In First Floor

CS0015: Providing Cuddappah slab of 40mm thick, finishing with two sides for cupboard a. In Ground floor

b. In First floor

JD0094: Providing T.W. double leaf shutters for Cupboard/ward robes with 9mm thick phenol Bonded BWR grade ply wood

FLMP0018: Supplying and fixing of pre-cast kerb stone of size 450x300x150mm made in CC 1:3:6

WS0002: Supplying and fixing of 110mm dia PVC SWR pipe Rain water downfall pipe

MS0050) C.I Steps 5kg

WS0033: Supplying and fixing of half turn C.P Long body Tap of 15mm dia

WS0036: Supplying and fixing of half turn C.P short body Tap of 15mm dia

MS0053) Supplying and fixing of C.I Manhole cover 60 x 60 cm (50 kgweight)

WS0006: Supplying, laying, fixing and jointing the following PVC pipes as per ASTM a) 32mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

b) 25mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

d) 50mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

WS0007: Supplying, laying and fixing of 20 mm dia GI Pipe ‘B’ Class of best approved quality for Hot water line

WS0276: Supplying, laying, fixing and jointing the following PVC pipes as per ASTM a) 20mm ASTM D schedule 40 threaded PVC pipe with necessary UPVC specials

WS0107: Supplying and fixing of 32mm dia PVC Tee with end cap of best approved quality with IS

WS0017: Supply and fixing of following GI pipes `B` class of best approved quality,with ISI mark including cost and conveyence and fixing in position c) 40mm dia GI pipe.

WS0018: Supply and fixing of following GI pipes `B` class of best approved quality,with ISI mark including cost and conveyence and fixing in position 50mm dia GI Elbow

WS0018.III.b: 50mm GI bend

50mm dia GI coupling

WS0018.VI.: a. 50mm dia GI Union

WS0018.VII.a: 50mm dia GI Hex Nipple

WS0018.IV.b: 50mm G.I Tee

WS0018.X.a: 50mm GM non return valve

WS0018.XIII.b: 40mm dia MS clamp sets

WS0018.IX.d: 50mm dia Gun Metal Gate valve

WS0018.VIII.c: 50mm x 40mm GI Reducer

SA0002: Supplying and fixing of Porcelin wash hand basin (white without pedastal), superior variety of size 550x400mm

SA0036: Supplying and fixing the following dia PVC(SWR) pipe with ISI mark confirming to IS 13952:1992- type `A` with PVC cowl and relevant specials confirming to IS

SAMP0006: Supplying and fixing 150mm x 100mm size stone ware Gully trap with iron gratings over a bed of 150mm thick brick jelly concrete in CC 1:8:16 (one of cement, eight of crushed stone sand and sixteen of broken brick jelly) using 40mm size brick jelly and brick masonry wall 110 mm thick using kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) in cm 1:5 (One of cement and five of crushed stone sand) plastered with CM 1:3 (One of cement and three of crushed stone sand) 12mm thick including Mortar Plasticizer (Liquid) at 200ml per bag

SAMP0003: Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety) having minimum of water seal of 50mm confirm to relevant I.S. specifications with its latest amendments including resting on the bed of brick jelly concrete 1:5:10 (One of cement, five of crushed stone sand and ten of 40 mm gauge brick jelly) including Mortar Plasticizer (Liquid) at 200ml per bag etc., complete

SAMP0004: Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark (to be got approved from EE before use) with PVC SWR grade 'P' or 'S' trap (Using crushed stone sand) (including Mortar Plasticizer (Liquid) at 200ml per bag) In Ground floor.

SAMP0005: Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark (to be got approved from EE before use) with PVC SWR grade 'P' or 'S' trap (Using crushed stone sand) (including Mortar Plasticizer (Liquid) at 200ml per bag). (Other than ground floor)

SA0025: Supplying and fixing EWC superior variety (White) 500mm with PVC SWR grade ‘P’ or ‘S’ trap

SA0031: Supplying and fixing the following dia PVC (SWR) pipe and relevant specials including packing the joints with rubber lubricant a) 110mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

b) 75mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

SA0035: Supplying, laying and concealing the 50mm dia PVC (SWR) pipe with ISI mark confirmed to IS 13952-1992 Type-B for waste water line

SA0048: Supplying, laying and jointing the following dia UPVC Non Pressure pipe a) 110 mm dia UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

SA0053: Supplying and fixing of the following dia PVC Equal Tee as per IS 10124/1982 b) 160 mm dia PVC Equal tee (BIS 7834/1975).

SA0155: Supplying and fixing of CP Two Way Bib Cock with Health Faucet

SA0070: Supply and delivery at site and fixing of SFRC manhole cover with frame with locking arrangement of clear opening heavy duty (35 M.T Capacity) to with stand any type of impact load b. 600mm x 600 mm

SA0046: Supplying and laying and jointing the following dia stone ware pipes with ISI mark Superior variety (glazed) with spigot b) 150mm dia SW pipe

MS0002: Supplying and fixing of 20mm dia aluminium hanger rods

MS0003: Supplying and fixing of Aluminium Towel Rail of 75cm

MS0006: Supplying and fixing of Aluminium plate with five pin for Coat Stand

MS0007: Providing and fixing iron Chromium plated 8 gauge Picture hooks

MS0008: supplying and fixing of BEVELED EDGE MIRROR of approved quality and brand of size 500x400x5.5mm

L0001: Supplying and planting of Avenue Trees

L0004: Supplying and fixing of Triangular shape chicken mesh Tree Guard using 8cm dia

EL0002: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable a) Light point with ceiling rose

b) Light point with bakelite battern type holder

c) Point wiring for calling bell/buzzer with push type switch with required Buzzer.

EL0010: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Fan Point

EL0018: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Stair case light point

EL0026: Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 K.V. grade cable for 5 Amps 5 Pin plug Socket Point @ Switch Board Itself

EL0034: Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable for 5 Amps 5 pin Plug Socket Point at Convenient Places

EL0041: Supplying and fixing 15 Amps 3 pin plug type socket with switch

EL0214: EARTHING AND EARTH CONNECTIONS: Providing Earthing station using pipe electrode as per IS 3043 using 2.5m of 40mm dia GI pipe

EL0074: Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook

EL0075: Charges for assembling and fixing of ceiling fan of different sweep with necessary connections and fixing of fan regulator

EL0078: Supply and delivery of following Electric Ceiling fan with ISI mark with blades and double ball bearing, capacitor,etc., complete a) 48"" Electric fan 1200mm sweep

EL0084: Supplying and fixing of 300 mm dia sweep AC exhaust fan

EL0070: Supplying & fixing of LED bulbs suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 9 watts LED bulb

b) 12 Watts LED Bulb

EL0047: Supply and fixing of 18 watts LED tube light with fitting of four feet long

EL0045: Supplying and fixing of water tight bulk head fitting with guard suitable for 12W LED lamp

EL0100: Supplying and fixing of 25 watts LED bulb with Street light fittings arrangements

EL0165: Supply and fixing of 63 amps triple pole main switch with fuse

EL0298: Supply and fixing of Electro Mechanically Operated Three phase earth leakage circuit breaker/residual current circuit breaker

EL0190: Run off main with 2 wires of 2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0191: Supply and Run off main with 2 wires of 4 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0204: Supply and Run off main with 4 wires of 6 sq.mm. PVC insulated single core multi strand fire retardant flexible copper

EL0202: Supply and Run off main with 4 wires of 4 sq.mm PVC insulated single core multi strand fire

EL0501: Supplying and laying of 1000 x 1000 x 300mm size ms 16 swg powder coated cable terminal box

EL0252: Supply and fixing of 20A Flush type Wall Socket, 20A DP MCB and 32A DP MCB

EL0174: Supplying and laying of 8 SWG GI wire for earth connection on wall

EL0227: Supplying and fixing 3 nos of 63 amps 500 volts grade

EL0434: Supply and fixing of 63A Three phase 500V 4 Pole change over switch.

EL0340: Supplying and clamping of following PVC armoured LTUG cable on post or wall and ceiling with necessary MS Clamps, Brass screws, T.W. Plugs, etc all complete as per relevant standard specification and as directed by the departmental officers. (above GL) h). 3.5 core 50 sq.mm.

EL0343: Supplying and fixing of brass cable gland suitable for following core sqmm PVC armoured LTUG cable with earth strip h). 3.5 core 50 sq.mm.

NL0002: Supplying Fabrication and Erection in position of M.S. scheme name and layout board

EL0618: Supply and fixing of vertical TPN 8 way 3 phase MCB distribution board in sheet steel

WS0021: Supplying and laying of following dia GI pipe "B" Class of best approved quality including cost of all materials with ISI mark, specials and labour charges for cutting, welding, joints and fixing in position etc.(Above GL) a. 50mm dia GI "B" Class pipe

b. 32mm Dia

EL0548: Labour Charges for conveying and fixing of UG Cable of Size of 4 to 25 Sq.mm and 2, 3, 3 1/2 , 4 core (AGL)

EL0549: Labour charges for conveying and laying of UG cables in the cable trench including earth work and providing sand cushion with brick layers below ground level

NL0006: Supplying and fixing of following size aluminium die casting lettering and numbering with approved coloured powder coated in matt finishing a) 9" dia aluminium dye casting letters

b) 6" dia aluminium dye casting letters

NL0007) Supplying and fixing of following size plastic foam plate of 3mm thick with 3' height vinyl cutting numbers with approved colours etc., complete and as directed by the departmental officers. (The quality of the material should be got approved from Executive Engineer before use) b) 24'' x 4" Plastic Foam Plate

MS0059: Supplying and delivery of following Godrej / Equivalent Navtal Lock including cost of materials and labour charges a) 6 Lever with 3 keys

WS0236: Drilling of (150mm) vertical bores in hard rock area to any required depth as desired by TNPHC a) Upto 150m depth ending below Ground level

b) From 151m upto 180m depth ending below Ground level

c) From 181m upto 210m depth ending from Ground level

WS0239: supply and erection of 150mm dia of pvc casing pipes (6kg/cm2) without as per is 12818/2010 of approved quality for bore wells

WS0240: supplying and fixing of 160mm dia pvc end cap for borewell casing pipe of approved brand etc., all complete and as directed by the departmental officers (the quality and brand of pvc end cap should be got approved by the executive engineer before use)

MS0087: Geologist Survey Charges

WS0278: Supply and delivery of clear water vertical wet type submersible pump suitable for 100mm/150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes o. 50 lpm x 175 m

WS0279: Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star q) 100 lpm x 50m

WS0162: Labour charges for the erection of three phase Upto 5 HP submersible pumpset in borewell / openwell

WS0266: THREE PHASE PANEL BOARD- D.O.L WITH TWO LEVEL GUARD AND AUTO START Supply For 5 HP Motor

WS0265: THREE PHASE PANEL BOARD- D.O.L WITH TWO LEVEL GUARD AND AUTO START Supply For 3 HP Motor

EL0349: Supply and delivery of 3 core 4 sq.mm flat type copper cable (AGL)

WS0235: Supply and delivery of nylon rope of best appred quality.

WS0243: Supplying of following dia UPVC Column pipe for borewell a) 32mm dia UPVC Column Pipe

K.Saravanan (BID ID -1515834)

Jagathesbabu (BID ID -1515914)

forserviz.com (BID ID -1515926)

dp constructions (BID ID -1515305)