Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.8 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹25.1 L+₹10,763.54 (0.43%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹29.4 L+₹4.4 L (17.8%)Rejected-Finance MEGHA SADAN GAGANNAGAR CURTI PONDA GOA 403401 | PONDA | SOUTH GOA | GOA | 403401 | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹29.9 L+₹4.9 L (19.8%)Rejected-Finance | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹29.9 L+₹5.0 L (20.0%)Rejected-Finance | L5 | Rejected-Finance Being L5 |
Tender Value
Refer Docs
EMD Value
₹80,000
Closing Date
16 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Alwar
GE Alwar
PERIODICAL SERVICES TO OTM/MD ACCN IN ML AND PP LINE AND WELCOME MAINT IN CITY AREA UNDER AGE B/R-I AT ALWAR
2022_MES_539062_1
8085/E8
Open Tender
Civil Works
Item Rate
240 days
Alwar
As per NIT
3 documents required · 3 mandatory
₹500
Yes
GE Alwar
₹80,000
Yes
13 Oct 2022
18 Jul 2022
18 Aug 2022
18 Jul 2022
16 Aug 2022
2 Aug 2022
18 Jul 2022 - 1 Aug 2022
Amount
Taking down cement plaster or cement lime plaster including raking out joints hacking for key scrubbing down with water etc all as directed.
M&L rendering 10mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified.
M&L for rendering 15mm thick in CM 1:4 on stone wall surfaces or other than fair faces of brick work & surfaces finished even and smooth without using extra cement with water proofing compound(water proof compound paid seperately) complete all as specified.
M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified.
M&L for preparation of new plastered surfaces of walls and applying two coats of Oil bound distemper over a coat of 3 mm thick wall care putty of approved tint complete all as specified & directed by Engineer-in-Charge.
M&L for preparation of new plastered surfaces of walls and applying two coats of white wash complete all as specified.
M&L preparation of newly plastered surface of walls & applying two coats of cement base paint over a coat of primer complete all as specified.
M&L preparation of newly plastered/unplastered surfaces of ceilings & applying three coats of white wash complete all as specified.
Supply only Integral waterproofing compound
M&L preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying one coat of oil emulsion distemper (OBD) of approved shade/tint all as specified & as directed.
M&L preparation of old decorated surfaces of walls, plastered including cornices, pilasters etc and applying one coats of white wash complete all as specified.
M&L for brooming down old decorated surfaces of wall, plastered or unplastered including cornices, pilasters etc and applying two coats of white wash, complete, all as specified and directed.
M&L preparation of old decorated plastered/unplastered surfaces of ceilings & applying one coats of white wash complete all as specified..
M&L for brooming down old decorated surfaces of wall, plastered or unplastered including cornices, pilasters etc and applying one coat of colour wash, complete, all as specified and directed.
M&L for brooming down old decorated surfaces of wall, plastered or unplastered including cornices, pilasters etc and applying two coats of colour wash, complete, all as specified and directed.
M&L for complete removal of existing treatment on walls and preparation of surfaces of walls and applying two coats of oil bound distemper (OBD) complete all as directed.
M&L for complete removal of existing treatment on walls and preparation of surfaces of walls and applying two coats of oil bound distemper (OBD) over a coat of 3 mm thick wall care putty complete all as directed.
M&L preparation of old decorated plastered/unplastered surfaces of ceilings & applying one coats of oil bound distemper (OBD) complete all as specified..
M&L preparation of old decorated plastered surfaces of walls and applying one coat of cement base paint of approved shade/tint complete all as specified & as directed.
M&L for complete removal of existing treatment on walls and preparation of surfaces of walls and applying two coats of cement base paint of approved shade/tint on walls all as specified and directed.
M&L preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth with pink primer and applying one coat of synthetic enamel paint all as specified.
M&L preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth with red oxide zinc chrome primer and applying one coat of synthetic enamel paint all as specified.
M&L old surface applying one coats of appex paint on walls all as specified & as directed.
M&L old surface applying one coats of plastic emulsion paint (exterior grade) on walls all as specified & as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces complete all as specified.
S&F 3mm thick figured glass pin head type and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces complete all as specified.
Taking up or down steel tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc. all as specified and directed
Taking up or down steel tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches etc. all as specified and directed
M&L galvanised steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors.
M&L galvanised steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors.
S&F in repair 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including taking down existing water tanks complete as specified in SSR Part-I
S&F in repair 1000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including taking down existing water tanks complete as specified in SSR Part-I
S&F ball valves, high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball, screwed for iron pipe 20mm dia (minimum weight 210 gms) complete all as specified and as directed.
S&F ball valves brass high pressure with polythelene float and fly net complete, screwed , iron pipes 20 mm dia complete all as specified & directed by Engineer-in-Charge.
S&F in repair vitreous china wash down water closet pan (Pedestal pattern), white including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc. & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified & as directed.
S&F as in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified.
S&F in repair PVC connection pipe, 15mm dia & 600mm long with adopter and washer at both end complete all as specified & directed by Engineer-in-Charge.
S&F in repairs plastic water closet seat cover white closed pattern with flat bottom and mild steel CP or aluminium hinging device complete all as specified.
S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed screwed shanks & fly nuts, screwed for iron pipes of 15mm bore all as specified and directed
S&F in repair brass chromium plated shower rose 125mm size with swivel joint type including fixing to steel pipe of 15mm bore or union complete all as specified.
S&F in repairs sink with drainage board made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brackets, bedding in cement mortar on to dwarf wall, connecting union to pipe, overall minimum size 915mm x 460mm with bowl size 410mm x 330mm x 160mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0 complete all as specified and directed.
S&F in repairs 15mm bore bib tap, cast copper alloy, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.
S&F in repair 15mm bore stop/angle valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union all as specified and directed.
S&F in repairs pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore all as specified including taking down existing pillar tap and removing the same to store all as specified and directed.
S&F white vitreous china wash hand basin 'Flat back' of size 550m x 400mm fixed on and including new brackets CP waste coupling and PVC waste pipe complete all as directed by the Engineer-in-Charge.
S/F in repair vitreous China squatting pan, Orissa pattern, size 580mm x 440mm white with integral foot rests connection to trap and to flushing pipe, etc.complete including making good to floor complete all as specified & directed by Engineer-in-Charge.
S&F in repairs Jet spray chromium plated brass for EWC with & including PVC connection 900 mm long suitable for 15 mm bore GI pipe with PTMT nut & nipple complete.
S&F in repairs health faucet, brass chromium plated for EWC with brackets including PVC connection 1m long suitable for 15 bore GI pipe with PTMT nut & nipple complete all as specified and directed.
S&F in repairs mirror cabinet PVC frame of size 400mm x 500mm fixed to wall with rawl plug & stainless steel suitable size screws complete all as specified and direceted.
S&F in repairs wall mixer chromium plated (3 in -1) with arrangement for both telephonic shower and overhead shower with 220 mm max long bend pipe with hand shower of size 100 x 55 mm with 130 mm long arm & 1.2 m house pipe complete all as specified & directed.
S&F in repairs glass corner shelf complete all as specified & as directed.
S&F in repairs vitreous china wash down water closet pan (Pedestal pattern EWC), coloured, floor mounted coupled closet, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, CP jet nozzle, vitreous china symphonic action type twin flush flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified & as directed.
S&F in repairs vitreous china wash hand basin white of size 800mm x 475 mm with and including PVC side cabinet and floor mounted cabinet of size 240x140x975 mm and 780x440x800 mm and mirror with PVC frame of size 560x800 mm complete all as approved by Engineer-in-Charge. Make : Somany Cat Part No 10527 (Basin) & 16122 (Cabinet), 170114 (Mirror), 160121 (side cabinet) or equivalent of M/S Johnson, H & R India Ltd / M/S Hindustan sanitary ware and Industries Ltd / CERA, Hindware, Madhusudan Ceramic as approved by GE.
S&F in repairs fancy type center hole basin mixer without popup waste system but including plain waste 32 mm size with aerator complete cast copper alloy, chromium plated, scrwed downhigh pressure, with long scrwed shanks & fly nuts scrwed for iron pipes of 15 mm bore complete all as specified & as directed. Make - Jaquar /Marc / Parryware / Somany / Parko / Gem / Prayag as approved by GE)
S&F in repairs brass chromium plated telephonic hand shower with 1.50m long stainless steel braided flexible tube with nut & nipple & hook suitable for wall mixer & screwed down for iron pipe of 15mm bore all as specified and as directed. Make :- Parryware/ hindware/cera/ Prima collection
S&F in repairs brass chromium plated towel rack 600mm long with lower hangers prima collection complete all as specified & as directed. Make - Jaquar /Marc / Parryware / Somany / Parko / Gem / Prayag as approved by GE)
S&F in repair PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed by Engineer-in-Charge.
S&F in repair PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed by Engineer-in-Charge.
S&F in repairs MS grating CP 100mm dia, with hole for waste pipe of approved make including fixing with CM to floor/nahani traps etc complete all as directed.
S&F 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work etc. including taking down existing frame work complete all as specified & directed by Engineer-in-Charge.
S&F 75mm extruded brass handles, fabricated type polished complete all as specified & directed by Engineer-in-Charge.
S&F Width of flaps (when open) 40mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified & directed by Engineer-in-Charge.
Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) & removing unserviceable materials in low laying area, complete, all as directed by Engineer-in-Charge.
M&L for 25 thick cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in levelling coarse for tiles.
M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and directed. Make : Kajaria/Somany/Johnson
M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar 1:4 complete all as specified and as directed. Make : Kajaria/Somany/Johnson
M&L non skid ceramic tiles colored 300x300x7mm thick in floor set and jointed in neat cement slurry and pointed in white or coloure cement and over 15mm thick screed bed in CM 1:6 complete all as specified& directed by Engineer-in-Charge. Make : Kajaria/Somany/Johnson
M&L coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed. Make : Kajaria/Somany/Johnson
M&L 75 mm thick PCC(1:3:6) type C1 (using 20mm graded stone aggregate ) as in plinth protection including forming groove 10mm wide & 30mm deep & filled with bitumenious filler at intermediate span n.exc 5m without using extra cement complete all as specified& directed by Engineer-in-Charge.
M&L 100mm thick Cement concrete 1:2:4 type B-2, (40mm graded aggregate) as in flooring Finishing cement concrete surface even and smooth without using extra cement complete all as specified & directed by Engineer-in-Charge.
Dismentling floor, hearth or wall tiling incl cement mortar bedding (but ot backing) , removing serviceable tiles to store and rubbish off the premises all as specified and directed
M&L glazed ceramic coloured tiles in vertical surface 450mm x 350mm x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10 mm thick rendring in cm 1:4 complete all as specified& directed by Engineer-in-Charge. Make : Kajaria/Somany/Johnson
M&L for 18/19mm thick granite slab of approved shade, as in platform etc, bedded & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of Granite stone including cutting, grinding and polishing (mirror polish i.e. full granite polish as per local trade practice) including required cutting to suit the size of oval type wash hand basin over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.
S&F in repairs powder coated stainless steel drapery rod of 20 mm inner dia (in lengths as directed) of approved colour with & including decorative bowel at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam, including PVC curtain rings of matching colour @ 10cm C/C all as specified & as directed.
Dismantling framed timber scantlings 40 sq. cm and over in section, in any position complete all as specified.
S&F MS steel work in tubular trusses and tubular posts including special shaped washers etc., complete using but welded. RHS/SHS confirming to IS 4923 : 1997 with one shop coat of zinc chromate primer paint.
M&L for roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe 410 W (Gde E-250) Quality B ,complete all as specified & directed by Engineer-in-Charge.
S&F for mild steel screw bolts dia of neck 5mm to 10mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,exc 5cm but n exc 10cm long compleete all as directed by Engineer-in-Charge.
M&L for plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 W (Gde E-250) Quality B ,complete all as specified & directed by Engineer-in-Charge.
Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed by Engineer-in-charge and all as specified.
Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified & directed by Engineer-in-Charge.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engr-in-Charge. Make : JSW/Tata Steel / RINL.
Taking down Chowkatts or frames with shutters ( without taking off shutters from the frame) n exc 1.5 sq.each & removing to store.
Taking down Chowkatts or frames with shutters ( without taking off shutters from the frame exc 1.5 sq. m but n exc 4 sq m each & removing to store.
S&F 35mm thick 2nd class hard wood factory made panelled door shutter(two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. the size of rail and stiles as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated and fixed to chowkats complete all as specified& directed by Engineer-in-Charge.
S&F 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats complete all as specified& directed by Engineer-in-Charge.
M&L solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing.
M&L factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified& directed by Engineer-in-Charge.
M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified& directed by Engineer-in-Charge.
S&F Butt hinges 100mm long medium weight, colled rolled mild steel complete all as specified& directed by Engineer-in-Charge.
S&F 150mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified & directed by Engineer-in-Charge.
S&F 150mm aluminium handles, cast type, anodised complete all as specified & directed by Engineer-in-Charge.
S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified & directed by Engineer-in-Charge.
M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete & making good the floor in PCC 1:2:4 type B-0 to match the existing floor.Fe-410 (Gde-E250 quality A).
M&L for flat iron hold fast 25mm x 5mm welded to angle iron door frame as directed by Engineer-in-Charge.
S&F anodized aluminium frame and other sections for doors, windows, ventilators, partitions, powder coated of any colour as approved (thickness or powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed.
S&F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21, 100mm long (2 Nos), suitable handle (1 No) complete all as specified & as directed.
S&F for powder coated of any colour as approved anodised aluminium grill of approved pattern for windows/ ventilators/doors complete all as specified and directed.
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.
S&F sheet glass ordinary quality, in squares n. exc. 0.5 SQM each 4.80 mm thick complete as directed by Engineer-in-charge
S&F solid rubber beading of 30 to 50mm wide and 3 to 5mm thick fixing at bottom to existing doors complete all as specified and directed
Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified& directed by Engineer-in-Charge.
M&L brick work with fly ash bricks {As per IS-13757 (1993) burnt clay fly ash building bricks}, old size bricks) straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L brick work with fly ash bricks {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and directed.
Demolition mud in roofs, any thicknes, including plastering , existing tretement and cleaning (whether full thickness removed or only or part there of) etc in all respect and preparing it for further treatment and taking out and disposal of debris & rubbish to a distance exc 1 Km but not exc 1.5 Km complete all as specified & directed by Engineer-in-Charge.
M&L for PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in roof padding, laid to a minimum consolidated thickness of 25 mm as leveling course, laid and compacted in min slope 1:30 over roof complete all as specified& directed by Engineer-in-Charge.
M&L rendering 15mm thick in CM 1:4 with water proofing compound over green concrete surface(WPC will be measured and paid seperately) surface finished even and smooth (without using extra lime or cement) complete all as specified & directed by Engineer-in-Charge.
Preparation of roof top surface, providing and applying heat reflective UV stable single component smart care damp proof ultra is a fibre reinforced elastomeric liquid applied water water proofing membrane formulated with PU hybrid polymers and reinforcing acrylics fibre and having SRI of 106 on top of concrete roof surface in three coats incl self primer at ratio of damp proof and water 3:1 and coverage @ 1 Ltr/10 Sqm with a thickness of 650 micron. Note :- 6 Hrs interval between two coats will be maintain & the work will be carried out through company applicator duly get approved from Accepting officer in writing before incorpotion and paid only after receiving of the warrenty certificate from the company. Make:- Dr Fixit, Asian paint or equivalent as approved by GE.
Taking down carefully anodized aluminium doors/ windows/ventilators frame including glazed shutters & builder’s hardware complete of any size and any description and refixing in the same opening after carrying out necessary repair & replacement of unserviceable components / hardware to make it fully functional complete all as specified & as directed. Notes :- (i) Quoted rate shall deemed to include supply & fixing of new joining cleat, aluminium beading, glazing clips, rubber packing, stays including cutting of old styles etc & adjusting the same appropriately as directed. (ii) Glazing, new aluminium sections for frame/shutters, builder’s hardware such as handles, hinges, door closure, floor door spring shall be measured & paid for separately. (iii) Loose corner joints of frame & shutters shall be tightened by providing suitable cleats made out of aluminium angle of appropriate size fixed with nut & bolts to make the joints at 90º.
AARSINFRATECH
M/S HARI CONSTRUCTION
M/s Laxmi Enterprises
J.J.ENGINEERING
M/S GAURI CONSTRUCTION
shiva construction
M/s ASK Enterprises
M/s S Amarjit Singh
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .