REPAIRS TO VARIOUS SEWAGE LINE, SEPTIC TANKS, MANHOLES, DRAINS, CLEANING OF SEWAGE LINES, HARDSTANDING AND PPGL SHEETS IN WING I, II, IV AND V AT ARTY CENTRE UNDER GE NASIK ROAD.

Amount

Excavation in trenches not exc 1.5m in width and not exc 1.5 in depth for foundation and getting out in any type soil including pipe lines

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm in soil.

Removing excavated materials to a distance not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 Mtr above the starting point

Demolition of RCC in cover slab

Demolition of brick work built in cement mortar (including coping)

Demolition of breaking up 300mm dia drain pipes of RCC or salt glazed ware set in CM

All as per Item No. 6.00 above but 200mm dia.

All as per Item No. 6.00 above but 150mm dia

Demolition of Cement Concrete of any description in ground floor & paving n.exc. 15 cm thick(below or above ground level)

Taking down cement plaster of any description on brick or stone walls or concrete surfaces etc. incl raking out joints, hacking for key scrubbing down with water etc

M&L for cement concrete type C-2 1:3:6 ( 40 mm graded aggregate) as in foundation, filling and mass concrete or chamfered at edges

M&L for PCC 1:2:4 type B2 as in surface channels and drains & benching of manholes and finishing even and smooth with out using extra cement.

M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in coping

M&L for pre cast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in manhole cover slabs set in cm 1:6 all s specified & directed

M&L for mild steel TMT bars 8mm dia cut to length bent to shape required and binding with ms wire anealed not less than 0.9mm dia, complete all as spacified and directed.

M&L for brick work with fly ash brick straight or curved on plan exc. 6 mtr mean radius, built in CM 1:6 with old size bricks.

All as per item No. 16 above but except material.

S&F reinforced concrete pipe, class NP2 laid and jointed complete with collers 300mm bore of pipe

All as per item No 18. above but 200 mm bore of pipes

All as per item No 18 above but 150 mm bore of pipes

M&L for rendering 10mm thick in on fair faces of brick work or concrete surfaces in cement mortar(1:4) finishing even and smooth without using extra cement complete all as specifed and directed

Taking down 100/75 mm dia CI/PVC and cast soil, waste and vent pipes, in any length with or without ears etc in any position

S&F in repairs of 75 mm dia PVC(SWR) pipes single socketed,in any length with rubber ring joints fixed to walls and making good

All as per Item No. 23.00 above but 110 mm dia

S&F in repairs of 75 mm dia PVC(SWR) bends of any radius and making good

All as per Item No. 25.00 above but 110 mm dia

S&F for PVC(SWR) vent cowl 110 mm dia

Cleaning of manholes of any size taking out sludge , effluent ,sand,, grit, ash, rags, fibre and string material etc complete and disposed as directed by Engr in-Charge

Cleaning of existing sewage line of any dia by roding including removal of sludge and taking out sewage water where required and finally flushing with clean water & The length will be measured from the first manhole to last blocked manhole including manhole in between.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing(, removing serviceable tiles, to stone and rubbish off the premises

M&L for Non -skid coloured ceramic joint free tiles 7 to 8mm thick (square/retangular) tiles exc 0.06 Sqm but n.exc 0.11 Sqm each, in floors etc. laid over and including 15mm thick cement mortar screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match.

S&F in repair Vitreous China water closet squatting pan, 'Orrisa' pattern, size 580 x 440 mm white, with integral foot rests and P trap (excluding flushing cistern and flush pipe) complete including provision of lime concrete bedding.

S&F in repairs 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including flush pipe and brackets fixed .

S&F in repairs hand shower (Health faucet) 1 mtr PVC tube with wall hook (CP) complete all as specified and directed.

S&F in repairs stop valve, 15mm bore dia PTMT of any colour high pressure screwed for iron pipe and fixed (Minimum weight 90 gms) complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm

Demolition of Cement Concrete of any description in ground floor & paving n.exc. 15 cm thick(below or above ground level)

Dismantling of stone slabs & tiles of any description or thickness (except ceramic tiles) in floors, aprons etc laid bedded & pointed in any mortar complete all as specified and directed.

M&L for 75mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) in sub base of flooring/hard standing.

M&L for rubber moulded machine pressed precast interlocking paver block with gray cement any shape and size confirming to IS 15658-2006 of 60mm thickness, M-25 grade laid on 30mm thick stone dust cushioning laid dry to the profile complete all as specified and directed.

Dismantling asbestos cement (corrugated,semi corrugated)sheets in roof covering

Dismantling wrought iron or mild steel work of any description not otherwise provided for including gas cutting, welding etc.

S&F Steel work in tubular trusses including special shaped washer etc. tubular purlins post, rafter including necessary cutting welding etc complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 structural steel is painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and directed

M&L for two coat synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description over 10cm in width or girth not otherwise described including preparation of new surfaces.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutter, drip and straight flashing.

S&F Framed work rolled mild steel plain angle cleats and plate for securing purlins to ragfter and similar small articals confirming to Fe-410-0 or Fe -250- as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete complete all as specified and directed

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS. 47,838.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

Alpha Construction

Vishal Constructions

Srujan Associates

M/S K. K. Construction

MAHIMA CONSTRUCTION

SVT ENGINEERS AND CONTRACTOR.

Vinod Enterprises

M/S MK Nair

GILL BROTHERS CONSTRUCTION

M/S R.K.S. CONSTRUCTION

Bidder Name

MAHIMA CONSTRUCTION

Vishal Constructions

SVT ENGINEERS AND CONTRACTOR.

M/S K. K. Construction

Alpha Construction

M/S MK Nair

Vinod Enterprises

Srujan Associates

M/S R.K.S. CONSTRUCTION

Abhiraj Enterprises

GILL BROTHERS CONSTRUCTION