SPECIAL REPAIR TO ELECTRICAL FITTINGS AND ALLIED WORKS OF CERTAIN HANGERS AND PROVN OF LADIES TOILET IN OFFICERS MESS NORTH CAM UNDER GE (AF) BAMRAULI

Amount

Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and directed.

M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in mass concrete complete all as specified and directed.

M&L for RCC M25 as in foundation , rafts footing, plinth beam complete all as specified and directed.

M&L for Use and waste of form works to sides of concrete foundations, footing bases of columns rafts and rafts with rough finished surfaces flat complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

As per item No. 5 as above but 5mm dia and over upto & including 8 mm dia as in stirrups

M&L for RCC M25 as in columns, pillars, piers, post and struts etc complete all as specified and directed

M&L for formworks to sides of pillar, strut, piers, columns and stancitions rough similar surface to concrete flat complete all as specified and directed.

Removing excavated surplus soil to a distance exc. 250 m & n. exc 500 m distance complete all as specified and directed.

M&L for treating the backfill in contact with foundation at the rate of 7.5 Litre of emulsion per square meter of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed.

M&L for Treating the top surface of filled earth @ 5 Ltrs of emulsion per sqm for floor & plinth protection complete all as specified and directed.

M&L for treating the soil under plinth protection at the rate of 5 litre of emulsion per square meter of surface area complete all as specified and directed.

M&L for treating the soil alongwith external perimeter of building at the rate of 2.25 liter of emulsion per meter of the perimeter wall complete all as specified and directed.

M&L for PCC (1:5:10) type E2 (using 40 mm graded stone aggregate) as in mass concrete complete all as specified and directed.

M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed.

M&L for RCC M25 as in beams, cantilever, bressummers, lintels over 1.50 m span and similar work etc complete all as specified and directed

M&L for RCC M-25 design mix in roof slabs supported walls beam and columns in floor roof landing, shelves etc complete all as specified and directed.

M&L for formwork to sides and soffites of floors or roof beam, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams etc complete all as specified and directed.

M&L for use and waste of formworks to soffits of roof slab, with rough finished surfaces flat resting on walls and beams complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar (1:3) cover concrete surfaces of roof, mixed with @ 200ml liquid water proofing compound by 50Kg weight of cement (1 bag) as per manufacturerrs instruction inclduing finishing surfaces even and smooth without using extra cement,cleaning the roof surfcae from dust /dirt and any other foreign materials and applying a coat of bituminius primer @ 0.30 liters per square meter uniformity after the surfaces fully dried complete and applying one coat of hot blown bitumen of grade 85/25 conforming to IS 702 over primed surface of roof slab @ 1.20 Kg/Sqm and applying APP based polymeric water proofing membrane minimum weight 3.6 Kg/ Sqm and minimum 3mm thick reinforced with polyster non wove fabrick (Weight not less than 150gms/Sqm or as per IS), laid over hot bitumen surface by torched application with the strict supervision of manufacturers technical supervisor. Membrane shall be laid with 100mm side/end lap on prepared surface as per manufacturer instruction work shall be carried out strictly with the technical tradesmen and supervision of technical staff of manufacturer.complete all as specified and directed. (WPC shall be measured and paid separately).

M&L for PCC (1:2:4) type B-O (Using 12.5 mm graded stone agregate ) 25 mm thick as in leveling course complete all as specified and directed.

M&L for vitrified ceramic light shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including screed bed 15 mm thick in CM 1:6 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.

M&L for heavy duty light shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including screed bed 15 mm thick in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300x450x7 mm thick in set and jointed in neat cement slury and pointed to white or coloured cement to match the shade of tile on the wall including and over 15 mm thick (1:4) screed bed etc complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water, etc all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick/conc surfaces of walls, finished even & smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick or concrete surface in CM 1:4 finished even & smooth all as specified and directed.

M&L for rendering 5mm thick in CM 1:3 finished even and smooth with out using extra cement in ceiling complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer and 3 mm thick wall care Putty on wall obtain smooth finish etc including balance area complete removal.

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed removal.

S&F factory made internal PVC Door frame of size 90mmx45mm (Moulded) single rebated made from wood polymer composite Single extruded Process material comprising of virgin PVC polymer of K value 57-60, Calcium carbonate and natural fibres and non toxic additive fabricated with meter joints after applying PVC slovent cement & Screwed with fully body treatd star headed screws having minimum density of 780 Kg/cbm and manufactured by ISO 9001-2015 Certified Company having good screw holding capacity minimum compressive strength of 58 N/Sqmm and resistance to spread of flame of class A category with poperty of being termite/borer proof, water/Moisture proof, fire retardant & fixed in position with SS Dash fastner hold fast of required dia and length all as per specifications drawing as directed by the Engineer in Charge.

S&F 30mm thick factory made solid panel PVC door shutter of required size comprising of virgin PVC resin of K value 57-60, Calcium carbonate and natural fibres and non toxic additive fabricated with meter joints after applying PVC slovent cement and Screwed with fully body treated star headed screws having minimum denisit not less than 650kg/cbm manufactured by ISO 9001-2015 Certified Company having good screw holding capacity, minimum compressive strength of 50 N/Sqmm, modulus of elasticity 850 N/Sqmm and resistance to spread of flame of Class A category with poperty of being termite/bore proof, water/Moisture proof fire retardant & fixed in position with SS Dash fastner hold fasts of required dia and length all as per specifications drawing as directed by the Engineer in Charge.

S&F galvanized iron tube, medium grade with all fitting such as bends, elbow, socket, reduce etc fixed to walls and ceiling complete all as specified and directed floors of following sizes :-

15 mm dia

20 mm dia

M&L for cutting chases for concealed water tubing, pinning in, making good of facings where required and pointing in cement mortar (1:3) to ends or edges etc, cutting not exceeding 10 cm width or girth, complete all as specified and directed.

S&F 500 Ltrs capacity rotational molded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR Part I-2009, complete all as specified and directed.

S&F ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 155 gms) complete all as specified and directed.

S&F 20mm bore gun metal globe or gate valves, with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F fancy type, chromium plated long body bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15 mm bore complete all as specified and directed.

S&F chromium plated steel towel rail with lower hanger with hooks fixed to wall with chromium plated brass screws 600mm long between flanges complete, Note stainless steel towel rail Cat Part No. AHS-1581 of make Jaquar or equivalent model of make specified in list of makes complete all a specified and directed.

S&F chromium plated toilet paper holder fixed to wall with drilling screws complete all as specified and directed. Make – Jaguar, Code –CAN-1153N or equivalent as specified in list of makes.

S&F chromium plated hand fossil for pedestal pattern WC screwed down high pressure complete all as specified and directed. Make-Jaguar, Code-ALD CHR 583 or equivalent as specified in list of makes.

S&F chromium plated jet for pedestal pattern WC screwed down high pressure complete all as specified and directed.

S&F chromium plated fancy type angular stop cock 15mm dia complete all as specified and directed. Make-Jaguar, Code-CON 059 KN or equivalent as specified in list of makes.

Supply only PVC connection 15 mm dia 600 long with PVC nut at both ends complete all as specified and directed.

S&F one piece Vitreous china wash down water closet (Pedestal Pattern) size 645mmx35mmx730mm ‘white’ with soft close seat cover & twin flush fittings, toilet paper holder, health faucet, PVC connection, angular stop cock (valve) (2 Nos) with flange etac all as specified in particular specifications. Note : Vitreous china wash down water closet (Pedestal Pattern) Cat Part NO. CURATOR S1013132 S trap 250 mm of ‘Cera’ or equivalent model of make specified in list of makes.

S&F vitreous china wall hung wash hand basin with pedestal snow white miniumum size 630mmx450mm including chromium plastered brass coupling, (two numbers), angular stop cock (valve) (two numbers) complete all as specified in particular specifications. Note : Vitreous china wall hung wash hand basin Cat Part NO. CONCORD S2040112, Pedestal cat Part No. S2090107 & chromium plated brass centre hole basin mixer cat Part No. F2002461 of ‘Cera; or equivalent model of make specified in list of makes.

S&F 100 mm cast iron sanitary connection socket to fit WC out let, complete all as specified and directed.

S&F low-density polythene pipes (LDPE) of pressure rating 6 kgf/Sqcm of 32 mm bore size complete to walls, ceiling or in floors etc, complete all as specified and directed.

S&F PVC (SWR) pipe single socketed in any length with rubber ring, fixed on wall complete for the following size :-

75 mm bore dia

110 mm bore dia

S&F PVC (SWR) pipe single socketed in any length with rubber ring, joints laid in trenches complete for the following size :-

75 mm bore dia

110 mm bore dia

S&F PVC (SWR) bend complete for following sizes :-

75 mm bore dia

110 mm bore dia

S&F PVC (SWR) vent cowl, of 75 bore complete all as specified and directed.

S&F 6 mm thick bevelled edge looking mirror mounted on 6mm thick backing commercial plywood fixed with CP plug with chromium plated brass screws and cup washer fixed on wall complete all as specified and directed.

S&F reinforced concrete drain pipe 200mm bore, class NP-2, laid in trenches and jointed in CM 1:1 with collars complete all as specified and directed.

M&L for PCC (1:4:8) type D2, using 40mm graded stone aggregate as in bed of drain pipes of 200 mm bore including packing under & hunching against the sides of pipes after they are laid & tested, complete all as specified and directed.

S&F powder coating anodized aluminium frame for windows, ventilators with one or more rebates including joining cleat for fixing etc. Complete all as specified and directed.

S&F powder coating anodized aluminium frame for shutter, windows, ventilators shutters, side hung type without sash bars, aluminum sections weighing 0.55 kg/m including necessary joining cleats, glazing clips rubber packing, anodized aluminium snap beading, screws, stainless steel chrome finish fittings such as peg stays 150mm long ( 1 No.) hinges type B21 100mm long (2 No) suitable handle (1 No) complete all as specified and directed.

M&L in repair for MS work as in as in grills / Guards bars fillets for securing wire mesh and similar articles and hold fost, complete all as specified and directed.

S&F POP false ceiling over GI snap grid perimeter wall channel 25x25m fixed on wall all round, GI main ceiling channel with flange 50x25mm @ 250mm C/C, cross GI channel section 25 x12 mm @750 C/C alongwht the suspenders of GI angle 25x25 mm @ 1200 mm C/C. The 20 to 25 mm thick POP lath Plastering over and including 0.56 mm thick wire gauge ceiling including form work. Ratio of POP and wall putty (1:1) and applying two coats of oil bound distemper including chalk whitening and priming in alkali restant including preparing the surface complete all as specified and directed.

S&F POP false cornices matching with existing POP false ceiling and wall putty (1:1) and applying two coats of oil bound distemper including chalk whitening and priming in alkali restant including preparing the surface complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in replacement Sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FRLS, 1100 Volts grade cable drawn into and including PVC conduit including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 6 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete. Note:- (a) Two runs of 6 sqmm cable and one run of 6 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish.

Supply and fix single pole and neutral distribution boards, (protection class IP-54) double door, suitable for mounting isolator fixing MCBs conforming to IS : 13032, IS : 8623, BS : 5484 with 200 Amps rating copper bus bar, SP and N, 12 ways, 240 volts, Note : MCBs shall be measured and paid for separately under respective item of this schedule.

Supply and fix Factory made sheet metal enclosure distribution boards, (protection class IP-42) double door, verticle type suitable for mounting MCCBS/ MCBs conforming to IS : 13032, IS : 8623, BS : 5484 with 200 Amps rating copper bus bar, triple pole and neutral, 8 ways, 415 volts Note :- MCBs and MCCB shall be measured and paid for separately under respective item of this schedule.

Supply and fix MCCB, three pole, 415 Volt ,125 Amp rating, 35 KA ultimate breaking capacity fixed in DBs.

Supply and fix MCB, SP, 6 to 32 Amp rating, 230 volt, 10 KA, 'C' series fixed in DBs.

Supply and fix MCB, single pole and neutral, 230 volts, 35 to 60 Amp rating, 'C' series fixed in DBs.

Supply and fix in replacement LED flood light fitting high way 150 watt with surge protection 4KV inbuilt in driver and minium 10 KV seperate, IP 66 having pressure die cast aluminium housing with heat resistent toughened glass individual LED lenses complete making connection with suitable in size 3 core of wire and suitable for sustain 440 volt for 2-4 hour (ii) LM-79 and LM-80 test report with 50000 burning hrs LED life from NABL lab shall be provided (iii) CRI (Colour rendering index of fixtures shall be greater then 70) (iv) System lumen efficiancy shall be 150 lumen/watt complete all as specified and directed.

Supply and fix in replacement LED flood light fitting high way 200 watt with surge protection 4KV inbuilt in driver and minium 10 KV seperate, IP 66 having pressure die cast aluminium housing with heat resistent toughened glass individual LED lenses complete making connection with suitable in size 3 core of wire and suitable for sustain 440 volt for 2-4 hour (ii) LM-79 and LM-80 test report with 50000 burning hrs LED life from NABL lab shall be provided (iii) CRI (Colour rendering index of fixtures shall be greater then 70) (iv) System lumen efficiancy shall be 150 lumen/watt complete all as specified and directed.

Supply and fix 2x2 feet size 36 watt 240 volt 50,150 lumen/watt Htz LED luminaries with high transmitive diffuser suitable for indoor spaces aluminium housing Bajaj cat part No- BCTBLL 36W LED or Philips cat part No-RC380BLED36S - 6500 or equivalent as specified in list of makes.

Supply and fixing in replacement of LED fitting of 21 watt 4 feet long integral sleek extruded aluminium housing LED channel with white acrylic cover wall mounted type complete all as specified and as directed Make : Philips cat no BN021C LED20S PSU CDL GR /Havells, Cat No HEWEBP7IN1W020/Crompton cat no LCCLB20-CDL or equivalent as specified in list of makes.

Supply and fix LED batten extruded surface mounting fitting 2 feet long aluminium housing 10 watt input voltage 220 volt inbuilt LED and driver Philips cat part No-BN021LED 10S or equivalent as specified in list of makes.

S&F fresh air fan, AC, single phase 230 volts of size 250 mm sweep, plastic body with louvers and making of hole & grouting nut & bolts and connecting with 3 run of 1.5 sqm, single core, PVC insulated mulstistranded copper conductor FRLS cable from ceiling rose and making good the disturbed surface with existing colour matching complete. Note :- Fan shall be of Make- Havells Cat part No Ventil Air DX or equivalent model of make as specified in list of makes.

Taking down carefully unserviceable copper / aluminium point wiring (light, fan, socket or power) including all fittings such as switches, socket, ceiling roses and fittings complete and making good the disturbed surfaces all as directed by Engineer-in-Charge.

Supply and fix MCB, single pole and neutral, 230 volts, 35 to 60 Amp rating, 'C' series fixed in .

M & L for point wiring complete with PVC insulated unsheathed stranded copper conductor cable 1.5 sqmm (FRLS)(nominal area) in and incl.concealed PVC conduit not less than 20mm outer dia med grade ISI marked comp.with all the accessories incl pressed steel concealed terminal box,grid plate and base plate suitable for Modular switch outlet with 1.5 Sqmm PVC insulated unsheathed stranded copper conductor cable as continuous earth wire connected to common earth dolly complete all as specified and directed for the following:

For one light point/fan/Exhaust fan/bell point controlled by one switch.

For one three pin socket out let 5 amps on independent board complete.

For one three pin socket outlet on same board.

One 3 pin 5 Amps socket out let independent but below the switch board of light point in the same vertical plane.

All as specified in item No.78 herein before but with 4 sq mm PVC insulated an PVC unsheathed cable for 3 pin 15 Amps power point on independent Board with 4 Sq mm copper PVC unsheathed as earth wire all as directed.

Supply and fixing Modular Switch single pole one way 6A, 230 Volts.

Supply and fix modular switch one way single pole flush type 16 Amp 230 volt.

Supply and fixing Ceiling rose surface type 3 terminals 65x20mm compelete all as specified.

Supply and fixing Modular Socket outlet 2 in 1, 2/3 pin, 10 Amps.

Supply and fixing Modular Socket 6A/16A - 2/3 pin combined 2 module.

Supply and fix white cover plate & base plate with frame two modular switches & sockets.

All as item No. 85 here-In-before but three module.

All as item No. 85 here-In-before but four module.

All as item No. 85 here-In-before but six module.

All as item No. 85 here-In-before but eight module.

Supply and fix metal flush box two module 1.6 mm for mounting modular switches & sockets

All as item No. 90 here-In-before but three module.

All as item No. 90 here-In-before but four module.

All as item No. 90 here-In-before but six module.

All as item No. 90 here-In-before but eight module.

Supply and fix in replacement switch modular flush 6A single pole one way ISI marked (One module).

Supply and fix in replacement switch modular flush type 15/16 Amp single pole one way 240 volt one module ISI marked.

Supply and fix in replacement modular sockets 6 Amp 2 in 1 2/3 pin combined (Two module).

Supply and fix in replacement modular sockets 16 Amp 2 in 1 3/5 pin combined (Two module).

Supply and fix step type fan regulator modulr type 120 watt 2 module 240 volt 50 Htz.

Supply and fix bus bar box made out of 3mm CRCA sheet powder coated factory made out door type conforming to IP-65 canopy mounted protection with front and back hinges door with proper locking arrangement, rubber gasket on front and back to make it dust and vermin proof and painted comprising one incommer MCCB 160 Amp ,35KA four pole, MCB SPN 63 Amp 10 KA-04 Nos 04 Nos copper bus bar strip duly fixed horizontally step manner , indication lamp -03 Nos, Amp meter & Volt Meter duly fixed on angle iron frame of size 50x50x6 mm and grouted in PCC 1:2:4 type B-I (using 20 mm graded stone agregate) in foundation including earth work completed all as specified and directed.

Supply and laying in trenches/wall/roof of XLPE Insulated galvanised steel strip armoured electric power cables(heavy duty)1100 volts grade with stranded aluminium conductor of size 35 sqmm 4 core.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1,5 mtrs in depth for laying of cables including getting out in soft/loose soil complete all as specified and directed.

M&L for Returning filling in including spreading, leveling ,and well ramming, in layers not exceeding 25 cm each layer of soft/loose soil.

Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point.

Supply and lay river bed sand for Sand cushioning for cables 8 cm below the cable and 15 cm above the cable all as specified and directed. (Thicknes of sand shall be measured after cushioning)

Supply and lay old size brick well burnt, laid flat ,for cable protection complete all as specified and directed.

Material and labour for replacement of GI tubing light grade 50 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4mm dia as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion. Notes: (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC 1:2:4 type B-1 using 20 mm graded Cur shed stone agreegate reinforced with 8 mm dia TMT bars @ 75 mm both way with suitable Mild steel handle shown in electrical plate No 3 of MES SSR Part-I. (ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (iii) Item includes the cost of 7.5 metre earth lead wire and GI pipe for protection of earth wire.

M&L for Earthing complete with Copper earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to 20x3 copper strip by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 25 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion. Notes: (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC 1:2:4 type B-1 using 20 mm graded Cur shed stone agreegate reinforced with 8 mm dia TMT bars @ 75 mm both way with suitable Mild steel handle shown in electrical plate No 3 of MES SSR Part-I. (ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (iii) Item includes the cost of 7.5 metre earth copper strip and GI pipe for protection of earth strip.

Supply and lay 16 sqmm single core multistranded, PVC insulated copper conductor cable as earth continuty from strip to highly sensitive equipment which reqire zero voltage in neutral to earth complete.

Supply and fixing of Distribution Board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, VTPN MCCB 4 way, 415 volts with bus bar rating 125 Amps, dust and vermin proof suitable for incorporation of MCB's and isolators etc and making all necessary connections complete all as directed. Note: The cost of removing old wooden box and making good of surface as original i.e. brick work, plastering, white washing etc is included in quoted rate.

Supply and fixing of MCCB C Curve type, 16 kA, 125 Amp, four Pole with over load and short circuit protection complete all as directed.

Supply and fixing of MCB C Curve type, 10 kA, 6 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed.

All as per srl item no 115 above here in before but SPN 40-63 amps capacity

Supply, laying, testing and commissioning of LT UG cable, XLPE insulated, PVC sheathed, galvanized steel strip armoured electric power cable with stranded aluminium conductor, 1100 volts grade of size 25 sqmm 4 core confirming to IS:7098 (Part-I), suitable for earthed system, laid in duct/trench/along pole/wall etc including nuts, bolts, washers, saddles & screws etc and making connection, complete all as directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is included in quoted rate and no extra payment will be made for it. 2. Excavation, earth work, sand cushioning and brick protection will be measured and paid separately under respective items.

Supply, laying, testing and commissioning of LT UG cable, XLPE insulated, PVC sheathed, galvanized steel strip armoured electric power cable with stranded aluminium conductor, 1100 volts grade of size 50 sqmm 3.5 core confirming to IS:7098 (Part-I), suitable for earthed system, laid in duct/trench/along pole/wall etc including nuts, bolts, washers, saddles & screws etc and making connection, complete all as directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is included in quoted rate and no extra payment will be made for it. 2. Excavation, earth work, sand cushioning and brick protection will be measured and paid separately under respective items.

Supply, laying, testing and commissioning of LT UG cable, XLPE insulated, PVC sheathed, galvanized steel strip armoured electric power cable with stranded aluminium conductor, 1100 volts grade of size 70 sqmm 3.5core confirming to IS:7098 (Part-I), suitable for earthed system, laid in duct/trench/along pole/wall etc including nuts, bolts, washers, saddles & screws etc and making connection, complete all as directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is included in quoted rate and no extra payment will be made for it. 2. Excavation, earth work, sand cushioning and brick protection will be measured and paid separately under respective items.

M&L for earthing complete with Galvanised earth plate electrode 600x600x6mm thick buried directly in ground (earth) pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level connected to galvanised iron strip 32x6mm as earthing lead by means of bolts, nuts, check-nuts and washers of galvanised iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, GI pipe light grade 40mm bore for protection of GI strip from earth electrode to and including the earth test point of galvanised Iron/steel of size 75mm x 75mm x 25mm, supplying and laying charcoal stone aggregate) chamber and mild steel angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B-1 using 20mm graded crushed stone aggregate reinforced with 8mm dia TMT BARS @ 75mm both ways with mild steel handle 12mm dia, PGI funnel with wire mesh, 20 MM dia GI pipe light grade for watering all as shown in electrical plate No.3 of MES SSR Part - 1

M&L for Boring of holes under road, pavement, hard standing by manual technique and necessary for laying GI pipe 50mm complete all as specified and directed,

S&F switch modular flush type 15/16 Amp single pole one way 240 volt one module ISI marked complete all as specified and directed.

S&F switch modular sockets 6 Amp 2 in 1 2/3 pin combined (Two module) complete all as specified and directed.

S&F modular sockets 16 Amp 2 in 1 3/5 pin combined (Two module) complete all as specified and directed.

S&F ceiling rose PVC/polycarbonate, isolated body complete all as specified and directed.

M&L in repair for sub main wiring with 2 run of single core PVC insulated and PVC unsheathed, multistranded copper condutor of nominal area 4 Sqmm FR, 1100 Volts grade cable drawn into and including 20 mm rigid PVC Conduit including all fittings and one run of PVC insulated and PVC unsheathed, Multistranded copper conductor of nominal area 4 sqmm FRLS 1100 volts grade cable continuous earth wire of gren colour code complete. Note (a) :- Two runs of 4 Sqmm cable and one run of 4 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Outlet rate shall deem to be included cost of cutting chesses in wall for concealling conduit and making good to match with existing finish.

S&F replacement factory made sheet metal enclosure distribution boards, (protection class IP-43) double door, suitable for mounting isolator fixing MCBs conforming to IS : 13032, IS : 8623, BS : 5484 with 200 Amps rating copper bus bar, SPN, 8 ways, 240 volts, Note : MCBs shall be measured and paid for separately under respective item of this schedule.

S&F electric water heater, storage type steel body with tank and heating element upto 2 KW capacity 25 Ltr, BEE 5 Star rated complete all as specified and directed.

S&F Wall mounted fan, 450 mm swep, AC, single phase, 230/240 volts, fixing on wall all as required and connecting with 3 run of 1.5 Sqm single core PVC insulated mulstistranded copper conductor cable from ceiling rose complete all as specified and directed.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material.

A S ENTERPRISES

Krishna Enterprises

M/S R S Traders

M/s Techno India and Company

Mohit Enterprises

M/s RN Kharwar & Sons