THE NEW 250 KVA T/F INSTALATION WORK UNDER 33/11 KV S/S AT DIFFERENT PLACES OF AGAINST BUSINESS PLAN 2025-26 SANCTIONED PACKAGES IN THE AREA OF EXECUTIVE ENGINEER, EUDD-VRINDAVAN, AMAUSI ZONE, LUCKNOW.

Amount

Safe Loading, Carriage & unloading of following Materials from Centre Store to Pit Site/J.E. Dump Store.

Line Material

11MTR., ST Pole - SP - 55 Galvanised

11 KV Pin insulator (Polymeric) With Gi Pin

11/0.4 KV T/F 250 KVA

LT PVC Cable Al 3.5x400 sq mm

LT PVC Cable Al 1x400 sq mm

Cable AL. 3 X 120 sq.mm XLPTE 11 KV

Cable LT ABC (3X50+1X35+ l X16) sq.mm

Cable LT ABC (3X120+1X95+1X16) sq.mm

11 KV Cable Jointing Kit (3x1 20 sq. Mm) OUTDOOR

G.I. Wire 4MM 8 SWG

LT Distribution box

Dragging of ST Pole digging of pit erection of sub-station type double pole structure on ST Pole with fixing of necessary item such as Top Channel, along with grouting (As per RESPO Norms) Dropper Channel, & 11 KV Disc Insulator with fitting, DO Fuse set its ramming, as per RESPO Specification ( Only Pole will be Provided by the Department).

Cable Hosting of 11 KV 3x120 sq. mm XLPE Cable at the following including jumpering etc complete with help of GI Pipe as Per RESPO Norms. (All required material shall be supplied by the contractor).

Earthing of poles as per RESPO norms (All the Materials Supplied by the contractor).

Chemical earthing for TF (Neutral & Body, fuse unit) as per RESPO norms (All material and labour shall be supplied the contractor)

Construction of T/F plinth of size 2x2x1.5 mtr with the help first class brick & masonry in the ratio 1:4 cement & sand coarse. Filling the structure completely per norms with RCC to 1:2:2 cement & stone grit with MS bar and MS channel for resting transformer. (All material and labour shall be supplied the contractor).

Wiremess fencing of 11/0.4 KV S/S shall be made of rectangular of size as per site requirement not exceeding 3 meter fabrication 45x45x5 mm angel the frame is also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support of wire mesh. Rectangular welded type wire mess of size 50x25 made of 12 S.W.G. wire mess shall be welded all along the periphery of the frame as well as on horizontal runner to give extra strength of welding to wire mess welded on the frame. Diagonal bracing of all the frame panel will be welded with Ms flat of size 25x3mm to support as per RESPO specification & direction of E/I (All material will be provided by the contractor).

Proper laying & commissioning of 3x50 sq.mm Aerial Bunched Conductor. (Only ABC Cable will be Provided by the department).

Proper laying & commissioning of 3x120 sq.mm Aerial Bunched Conductor. (Only ABC Cable will be Provided by the department).

Fixing and laying of LT PVC Cable 3.5x400 sq.mm as per RESPO Norms (Only PVC cable will be provided by the department).

Grouting of ST Pole.

Supply and fixing of copper L-piece for 250 KVA TF (62x225x12 MM) as per RESPO Norms

Supply and fixing of aluminium Lug for 250 KVA TF (400sqmm) as per RESPO Norms

Supply & Construction of Messonary Type LT Distribution box with 3 No. Tailless Fuse Unit with Bus Bar with earthing)All material shall be supplied by contractor)

Supply and fixing of Danger board with Clamp as per RESPO Norms

Fabrication, errection & commissioning of 250 KVA T/F on Plinth with all accessories. (All material except 250 KVA T/F shall be supplied by the Contractor).

Fixing OUTDOOR / INDOOR END TERMINATION JOINTING KIT FOR 11 KV 3X120 SQMM XLPE CABLE. (Jointing Kit will be provided by the Department).

G.S.T. Extra as per rules.

IMPORTANT INSTRUCTION / NOTICE- On completion of the work, close view updated photographs of the said work along with GEO Tag must be made available.

M/S SURAJ ASSOCIATES (BID ID -5536032)

M/S ANAND ENTERPRISES (BID ID -5538790)