Loading…
Loading…
Tender Value
₹1.3 Cr
EMD Value
₹2.6 L
Closing Date
25 Aug 2026, 3:00 pmDue today
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
WORKSOL
19 conditions · 8 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less, where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure- VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of dvertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway.
In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing.
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates.
In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Definition of Similar Work: - Any Signalling or Telecom work.
29 conditions · 14 needing a document upload
Please submit your bank details i.e. Name of the Bank along with Bank Branch Code, Account Number, IFSC Code, and PAN Number.
Please furnish list of plant and Machinery available on hand own and proposed to be inducted own and hired to be given separately for the subject work.
Please furnish list of Works on hand indicating Description of Work, Contract Value, Approximate value of balance work yet to be done and Date of award.
Please furnish list of Works completed in last seven financial years giving Description of Work, Organization for whom executed, approximate value of contract at time of award, Date of award and Date of Completion. Date of actual Start, Actual Completion and Final value of Contract shall also be given.
Please furnish list of personal, organization available on hand and proposed to be engaged for the subject work.
Documents to be Submitted Along with Tender: (i)The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / HUF etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (ii)Following documents shall be submitted by the tenderer:
(a)Sole Proprietorship Firm: All documents in terms of Para 10 of the Tender Form (Second Sheet) above (As per GCC-2022).
(b)HUF: i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.as per GCC-2022.
(c)Partnership Firm: All documents as mentioned in para18 of the Tender Form (Second Sheet) as per GCC-2022.As per GCC- 2022.
d) Joint Venture (JV): All documents as mentioned in para 17 of the Tender Form (Second Sheet).as per GCC-2022.
(e)Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) above.(Eligibility Criteria) above as per GCC-2022.
(f)(i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet)..(Eligibility Criteria) above as per GCC2022.
(g)Registered Society & Registered Trust: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.
The tenderer whether sole proprietor/ a company or a partnership firm/registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected.
Any DIPP certificate submitted along with the tender document for, exemption of EMD should be valid on the date of opening of the tender, else the tender offer will be summarily rejected.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderers may also upload the following documents along with his/their tender: The tenderer may upload statement, which shall contain organizational set up and working systems to be adopted by the successful tenderer s during the operation of the contract. It shall contain the details of man power and machineries in the prescribed format and details of methodology for planning, execution, monitoring and completion of the project. The methodology so adopted shall suit to the nature of work and shall also comply fully with best practice and current regulations. A comprehensive detailing for each activity like setting-up organization, safety plan, execution plan, quality assurance plan, sequence of work to achieve the mile stones, ensure targeted progress and quality and in turn deployment of resources, risk analysis and its mitigation strategy shall be given communication arrangement within his organization and with the railways for decisions, progress or any other matter connected with this project to ensure full information about the project including progress of work at different time scale shall also be furnished.
List of works completed in the last seven financial years giving description of work, organization for whom executed, approximate value of contract at the time of award, date of award and date of scheduled completion of work. Date of actual start, actual completion and final value of contract should also be given.
Supportive documents/certificates from the organizations with whom they worked/are working as list of works completed and list of works on hand should be enclosed.
List of works on hand indicating description of work, contract value, and approximate value of balance work yet to be done and date of award.
Uploading of declaration regarding Employment/Partnership etc. of Retired Railway Employees as per GCC-2022. (ANNEXURE Attached)
Uploading of Tender Forms shall embody the contents of the contract documents either directly or by reference and shall be as per specimen form, e-Tender Forms shall be issued free of cost to all tenderers.
A copy of certificate stating that they are not liable to be disqualified and all their statements/documents submitted along with bid are true and factual. Standard format of the certificate to be submitted by the bidder is enclosed as Annexure-V. In addition to Annexure-V, in case of other than Company/Proprietary firm. Annexure-V(A) shall also be submitted by the each member of a partnership firm/Joint Venture (JV)/ Hindu Undivided Family (HUF)/ Limited Liability Partnership (LLP) etc. as the case may be.Non submission of a copy of certificate by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he are/is qualifying the Qualifying Criteria mentioned in the Tender Document. (As per Railway bord letter no.2022/CE-l/CT/GCC- 2022/Policy dt. 13.12.2022)
Declaration form regarding site etc.
Declaration regarding constitution of firm.
Engineers/Personnel.
Performa of Completion Certificate.
All tender conditions shall be strictly complied with as per the Indian Railways Standard General Conditions of Contract (GCC), April 2022, along with all subsequent correction slips issued thereof.
Provision of S&T work in connection with RCC boundary wall along the track in JHS- CNB Section (12.8 kms), JHS-MKP Section (5.8 kms) & LAR-KURJ Section (5.8 kms) under jurisdiction of Sr.DSTE/BL/JHS of Jhansi division.
JHS-N-W-51-26
JHS-N-W-51-26
Open
Works - General
12 Months
Jhansi, Uttar Pradesh
₹0
₹2.6 L
29 Jul 2026
29 Jul 2026
11 Aug 2026
124 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 78,67,255.9 | ||
| — | 110.00 | — | — | ||
| Supply, fabrication and fixing of the Calling On board/BSLB board as per RDSO Drg. no. SA 2373 (Adv)/Stop/Warning board as per drg. no SA-2380 (Adv), or as applicable, on concrete foundation and painting with Retro reflective paint. All work to be carried out as per Railway site engineer instructions. (Inspection Agency-RDSO/RITES). | — | — | — | 8,91,965.8 | |
| — | 340.00 | — | — | ||
| Supply, fabrication and fixing of Retro-reflective Signal number plates as per NCR drg. No. TYP/14/0014 dtd 28.11.2014 issued vide NCR letter no. S&T/NCR/DRG/TYP dated 28.11.2014,0n signal post with contractor's own material like clamp, U bolts, nuts etc.(Inspection Agency- Consignee). | — | — | — | 2,53,130 | |
| — | 3150.00 | — | — | ||
| Supply of Disconnect Terminal block for four conductors with screwing cage /clamp type, sliding switch disconnect, as per RDSO spec.No. RDSO/ SPN/189/2004 Ver. 3.0 or latest, for each conductor size up to 2.5 sq. mm, equivalent of M6 terminals. Each terminal block equipped with two markers, on top and bottom, an end plate, two end clamps and adequate length of rails for fitting terminal blocks.(Inspection Agency-RDSO/RITES). | — | — | — | 6,07,068 | |
| — | 42.00 | — | — | ||
| Supply of thermoshrink jointing kit as per RDSO Specn.No. IRS: TC 77-2012 (Rev.3.0) with (Amdt.-1 to 3) or latest, suitable for 6 Quad/jelly filled cables for straight through/derivation joints. It includes supply of all the accessories, without transformer.(Inspection Agency-RDSO). | — | — | — | 1,41,168.3 | |
| — | 7.00 | — | — | ||
| Supply of permanently lubricated HDPE duct, 40 mm outer dia, as per RDSO spec. No. RDSO/SPN/TC/45/2013 Rev.2 Amndt.2 or latest, along with all accessories like end caps, collars, bends, couplers etc.(Inspection Agency-RITES/RDSO). | — | — | — | 5,37,679.94 | |
| — | 29.00 | — | — | ||
| Supply of 24 fiber optical fiber cable straight joint enclosure (SJC) complete with all accessories along with enclosures with heat shrinkable splice protection sleeve as per RDSO spec. RDSO/SPN/TC/68/2014; Revision 1.0, Amndt. 1.0 or latest. Splice losses in no case should be more than 0.1 dB.(Inspection Agency-Consignee). | — | — | — | 1,59,658.05 | |
| — | 37.00 | — | — | ||
| Supply of Apparatus Case/Location Box Half as per RDSO drg.no.RDSO/S-11507 or latest, with 'E' type lock and key ward no.42,. The key and handle should be supplied at the rate of one no.per four Apparatus cases. The'E' type key lock is as per RDSO drg.no.SA3376/M or latest and Key is as per Drg. No. 3377/M or latest. Note: This item includes the supply of 2 Nos E Type Lock fitted on both doors, along with two Keys.(Inspection Agency-RDSO/RITES). | — | — | — | 7,36,473.53 | |
| — | 280.00 | — | — | ||
| Supply of Double Walled Corrugated (DWC) Pipe/duct with associated collars etc. as per RDSO Specification No. RDSO/SPN/204/2011 or latest anti-rodent & anti-oxidant and non flame propagating type in 6 meters straight length and of size 120 mm outer dia,& 103.5 mm inner dia. (The manufacturers, suppliers must produce valid IS license and should be certified under ISO 9000 and shall submit copy of certificate). One coupler with suitable rubber O-ring should be supplied with every 6 mtr of pipe length. (The total quantity of above items is equal to no. of pipes supplied.) DWC pipe shall be marked at every 1 mtr length in such a way that manufacturer's name, vendor name and year of manufacture can be easily identified. (Inspection Agency-Consignee). | — | — | — | 1,69,923.6 | |
| — | 500.00 | — | — | ||
| Supply of Glass Fuse, Size 5mm x 20mm, 4.0amp. (Inspection Agency-Consignee). | — | — | — | 3,010 | |
| — | 500.00 | — | — | ||
| Supply of Glass Fuse, Size 5mm x 20mm, 6.0amp.(Inspection Agency-Consignee). | — | — | — | 2,335 | |
| — | 500.00 | — | — | ||
| Supply of Glass Fuse, Size 5mm x 20mm, 10.0amp.(Inspection Agency-Consignee). | — | — | — | 4,595 | |
| — | 500.00 | — | — | ||
| Supply of Protectron Glass Fuse, Size 5mm x 20mm, 16.0Amp. (Inspection Agency- Consignee). | — | — | — | 5,140 | |
| — | 120.00 | — | — | ||
| Supply of Deltron Make Panel Rotary Switch (2 Way) for LC gate panel. DELTRON MAKE.(Inspection Agency-Consignee). | — | — | — | 1,20,360 | |
| — | 12.00 | — | — | ||
| Supply of portable maintenance Service Terminal for installation, testing and maintenance of all networking parameters, as per Technical Specification. Make:- HP/Dell or superior. (Inspection Agency-RDSO/RITES). | — | — | — | 8,49,188.64 | |
| — | 2.00 | — | — | ||
| Supply of Insulation resistance tester. Make Fluke 1507 or superior or latest version. (Inspection Agency-Consignee). | — | — | — | 98,627.4 | |
| — | 5.00 | — | — | ||
| Supply of Soldering iron 65 W of reputed branded make.(Inspection Agency- Consignee). | — | — | — | 1,750 | |
| — | 250.00 | — | — | ||
| Supply of stretcher bar insulation complete set consisting of the following: - Plate-T- 10367-1 No., Bush T- 10368- 3 Nos. and washer-T- 10371 -6 Nos. The material to be procured as per RDSO Specification IRS/S/40- 84 or latest.(Inspection Agency-Consignee). | — | — | — | 95,372.5 | |
| — | 180.00 | — | — | ||
| Supply of Insulating materials of Ground connection for 220 mm stroke Point Machine as per Drawing No. RDSO/S-3592 (1 No.), RDSO/S-3593 (1 No.),S-23199 (2 No.), S-8640 (4 No.), S- 3463 (1 No.) as per specification No. IRS:S-24/2002 or latest.(Inspection Agency-Consignee). | — | — | — | 55,440 | |
| — | 180.00 | — | — | ||
| Supply, fabrication and fixing of retro-reflective marker/boards/plates as per the following: 'P'marker-Non illuminated as per Drg. no.SA-23456 (Adv), 'AG' marker-Non illuminated as per Drg. no.SA-23459-60 (Adv), 'A' marker - Illuminated as per Drg. no.SA-23461(Adv), 'G' marker - Non illuminated as per Drg. no.SA-23477(Adv) or as applicable and provided by Railways.(Inspection Agency-Consignee). | — | — | — | 1,59,726.6 | |
| — | 500.00 | — | — | ||
| Supply of L Bracket insulation made of Nylon 66 as per specification No IRS-S-40-84. One set consisting of materials of 1). insulating plate Drg no S8804=1nos, 2) Insulating Bush drg no S8813=2 nos, 3) Insulating washer drg no S8640-2nos. with proper manufacturer text certificate for materials.(Inspection Agency-Consignee). | — | — | — | 12,980 | |
| — | 1260.00 | — | — | ||
| Supply of Limit switch new top roller type with 2 NO +2NC contact suitable for Globle electric lifting barrier.(Inspection Agency-RDSO/RITES). | — | — | — | 6,91,803 | |
| — | 5.00 | — | — | ||
| Supply of OWON HDS272S or superior 3 in 1 Handheld Digital Oscilloscope Waveform Generator Multimeter 2CH USB Type C 70MHz 3.5 LCD Test Meter or superior.(Inspection Agency- Consignee). | — | — | — | 1,35,000 | |
| — | 200.00 | — | — | ||
| Supply of SC to SC Single Mode Simplex Fibre Optic Patch Cable 5m length. Make:- Syrotech/Supershopper India or superior.(Inspection Agency-Consignee). | — | — | — | 1,09,884 | |
| — | 10.00 | — | — | ||
| Supply of Q-Series LED ECR (Universal Type i.e.QECX-61), 4F/4B complete with plug board(base plate), connectors, retaining clips etc. and conforming to BRS: 941A STS / E / RELAYS / AC LIT LED SIGNAL / 09 - 2002, Amdt.-1 or latest and RDSO Spec.No.IRS: S - 34, S- 23 or latest, as applicable. The interlocking code for this unit shall be ""ABDHK"".(Inspection Agency-RDSO). | — | — | — | 69,173.8 | |
| — | 2.00 | — | — | ||
| Supply of Junction route indicator unit 2 way/ 3 way, made of FRP, (Without Lenses & Holder) as per Drg. No.SA 23401-06 (Adv.) (as applicable) suitable for LED Signal Lighting Unit and as per RDSO spec. IRS: S-66/84 Amd.-1 or latest and RDSO/SPN/194/2006 Rev.2 or latest.(Supply of LED Unit is not covered in this item).(Inspection Agency-Consignee). | — | — | — | 90,917.22 | |
| — | 2.00 | — | — | ||
| Supply of NonMetallic (FRP) colour light signal housing multiunit type for railway signalling suitable for RE area FOUR Aspects, complete 'without lenses, lamps and signal transformer as per RDSO Drg. No. SA23001 A/M (Adv.) and as per RDSO spec. No. RDSO/SPN/194/2006 (Rev 2.0) or latest and FRP material as per RDSO SPEC. No. RDSO/SPN/151/1997 or latest. (Inspection Agency-Consignee). | — | — | — | 84,461.66 | |
| — | 50.00 | — | — | ||
| Supply of Electrical lifting barrier booms of 9.76meter (32 feet) long ,in four section of 8feet each, as per RDSOspec.RDSO/SPN/208/2012 Ver.2.0 or latest and as per RDSO drawing no. RDSO/S/11600 or latest. suitable for global make EOLB.(Inspection Agency-RDSO/RITES). | — | — | — | 8,80,289.5 | |
| — | 600.00 | — | — | ||
| Supply of 1 x 25 Sqmm (Red/Black) multi strand pvc insulated copper flexible power wire, and test parameters as per RDSO Specn.No.IRS:S-76/89(Amnd.3) or latest. Colour of the wire which is required will be specified by the Engineer incharge. (Inspection Agency-Consignee). | — | — | — | 2,45,250 | |
| — | 70.00 | — | — | ||
| Supply of LCB Key Switch with 1 NO + 1NC or 2 NO Config. Of ESBEE make (L&T) , Siemens or equivalent suitable to work with Block Panel of Deltron make as per RDSO Spec.No.IRS-S- 105/2012 VER.0 or latest. (Inspection Agency-Consignee). | — | — | — | 70,003.5 | |
| — | 100.00 | — | — | ||
| Supply of Patch cord-LC-LC , 5mtr (Connector make: /Syrotech/3M/Huber- Shuner/ R&M/ TE [Connectivity/Raychem or superior).(Inspection Agency-Consignee). | — | — | — | 30,911 | |
| — | 100.00 | — | — | ||
| Supply of FC/PC-LC/PC Single Mode simplex 5 M Fiber Optic Patch Cord Optical Fiber Cables Connector (5M), Yellow. Make-Syrotech/Radiant/Hanutech or superior.(Inspection Agency- Consignee). | — | — | — | 26,010 | |
| — | 100.00 | — | — | ||
| Supply of 2.9M 9.5 Ft Single mode ST/PC to SC/PC Fiber Optic Patch Cord Jumper Cable. Make-Gino or superior. (Inspection Agency-Consignee). | — | — | — | 57,375 | |
| — | 100.00 | — | — | ||
| Supply of SC to LC Fiber Patch Cable, 10 Meters Single Mode Simplex SM Fiber Patch Cords- 9/125m SC-LC Fiber Optic cable. Make-HANUTECH or superior.(Inspection Agency-Consignee). | — | — | — | 45,441 | |
| — | 60.00 | — | — | ||
| Supply & installation of RFID based Electronic cable route marker for S&T/Power cable, which can be buried at a depth range 1.5 meter. Make -Stanlay/3M or similar. This Item Includes the GPS marking of RFID Marker with the help of RFID Locator or App based system. (Inspection Agency-Consignee). | — | — | — | 1,11,240 | |
| — | 20.00 | — | — | ||
| Supply and installation of earth electrode as per standard practice and as per NCR Drawing No. S&T/Const/6.4/97. It includes supply of GI pipe of 3m length. It includes connecting the earth electrode to the equipments which are required to be earthed including digging of earth pit 3 mtr deep and fixing earth electrode pipe, casting of cement concrete enclosure with cover (cover as per NCR Drawing No. S&T/Const/6.3/97). It includes installation of 7 strand GI wires as earth lead wires, supported on MS flat size 5mm x 40 mm, soldering and nut bolt both, one end of both earth lead wire and MS flat to earth electrode and other end to Location boxes, block equipments, power equipments, cable sheath, signals etc. as per site requirement and as per instructions given by engineer incharge.(Inspection Agency-Consignee). | — | — | — | 67,070.8 | |
| — | 6.00 | — | — | ||
| Supply of 48 fiber optical fiber cable straight joint enclosure[SJC] complete with all accessories along with enclosures for 48 fiber OFC and splicing of 2 X 48 F OFC. Splice losses in no case should be more than 0.1 dB.(Inspection Agency-Consignee). | — | — | — | 1,24,780.26 | |
| — | 20.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ADVANCECORRECTIONSLIP10.pdf
ATTACHMENT
ADVANCECORRECTIONSLIP7.pdf
ATTACHMENT
ADVANCECORRECTIONSLIP8.pdf
ATTACHMENT
ADVANCECORRECTIONSLIP9.pdf
ATTACHMENT
GCC_April-2022.pdf
ATTACHMENT
GCC-2022change.pdf
ATTACHMENT
RetiredRlyEmployee.pdf
ATTACHMENT
AdvanceCorrectionSlipNo.2.pdf
ATTACHMENT
GCC2022ACS-3AdvanceCorrectionSlipNo.3.pdf
ATTACHMENT
2022-CE-I-CT-GCC-2022-PolicyCorrectionSlipNo.4.pdf
ATTACHMENT
GCCcorrectionslip-5.pdf
ATTACHMENT
Annexure-VandAnnexure-V_A_.pdf
ATTACHMENT
AdvanceCorrectionSlipNo_6.pdf
ATTACHMENT
2021Tele523part13425647.pdf
ATTACHMENT
DIPPtendercondition30.05.2025.pdf
ATTACHMENT
GCCACS11.pdf
ATTACHMENT
TENDERBOOKLET51-26.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].