DEPOSIT WORKS AT 33 KV SUB STATION VEDVYASPURI IN THE AREA OF EDSD I MALIYANA UNDER EDD III PALLAVPURAM MEERUT

Amount

Cartage of following material from store center Meerut to JE Store including loading & unloading at both ends maximum distance up to 40 Km. :-

PCC Pole 8.5 Mtr Long/ST Pole 11 Mtr. Long.

Line material such as 11 KV Cross arms 11 KV pin, 11 KV pin insulator, 11 KV Disc, Stay rod, Stay wire ACSR weasel conductor, GI Wire, MS angle iron & MS Channel, TPMO, Fuse set etc.

25 KV to 100 KV T/F including complete related material required for transformer.

XLPE 11 KV Cable 3x70 to 185 mm

CT PT Unit Complete

Meter Cubical

Cartage of following material from JE, Store to site of work including loading & unloading at both ends maximum distance up to 40 Km. :-

PCC Pole 8.5 Mtr Long/ST Pole 11 Mtr. Long.

Line material such as 11 KV Cross arms 11 KV pin, 11 KV pin insulator, 11 KV Disc, Stay rod, Stay wire ACSR weasel conductor, GI Wire, MS angle iron & MS Channel, TPMO, Fuse set etc.

25 KV to 100 KV T/F including complete related material required for transformer.

XLPE 11 KV Cable 3x70 to 185 mm.

CT PT Unit Complete

Meter Cubical

Erection of PCC pole 8.5 Mtr long/STP Pole 11 mtr long after digging a pit of size 1.20 x 0.60 x 1.6 mtr in all type of Soil including back filling of the pole with proper ramming after completion of work.

Fabrication and fixing of all 11 KV HT/LT line accessories.

Erection of Double pole on PCC pole 8.5 mtr after digging a pitt of size 1.20 x 0.60 x 1.6 mtr in all type of Soil for each pole including back filling of the pole with proper ramming after completion of work.

Fabrication and fixing of MS angle and MS channel, fixing all 11 KV accessories TPMO, Fuse set 11 KV pin insulators.

Mounting of 25 to 100 KVA T/F with proper jumping of HT side and fixing of cable on LT side of T/F.

Erection of stay rod complete after digging a pit of size 1.20 x0.60 x 1.6 mtr and grouting the same in block of size 0.60 x 0.60 x 0.30 mtr and nuzzling at the both ends and filling the pit with excavated earth soil with proper ramming.

Laying lifting stringing of proper sagging of ACSR weasel conductor for 3 phase, 3 wire 11 KV line including binding & jumpering properly.

Laying lifting & sagging of LT line with ACSR weasel Conductor including proper binding & jumpring.

Dismantel of CT/PT unit

Dismantel of Meeter Cubical

Earthingh of each 11 KV line pople & T/F properly after drive of electrodes if size 20mm x 250 mm and connection the earthing point with GL wire.

Guarding of line with G.I. wire having 2 no. horizontal wire & 3 Mtr distance odf laces of ten SWG G.I. wire after fabrication of guard cross arms of & fixing the same in supports.

providing and fixing stay clamps.

Providing and fixing Holding clamps.

Providing and fixing LT clamps.

Providing and fixing LT Insulator clamps.

Providing and fixing Bolt and Nuts.

Providing and fixing of G.I. Pipe

Laying of 11 KV XLPE cable in cable tranch after digging of tranch. Then filling the cable tranch with excavated earth soil bricks over the cable.

Fixing the cable jointing kit with the end of XLPE cable including mounting the same on pole with proper binding.

Fixing of Distributon box on suport after providing and fixing of fixing clamp including connection of LT ABC Cable

Fixing of meter cubical including grouting the bolt and Nut and connection of cable

Laying lifting and sagging including mounting of LT ABC cable of size 1x25 to 3x95 including fixing of all required its accessorise

Water level earthing with GI Pipe 32 mm Dia and MS Flat of size 45x5mm

SHASHI ENTERPRISES

Hi-tech power transmission