Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.9 LAccepted-Finance | ₹10.9 L | L1 | Accepted-Finance Accepted |
| 2 | L2₹11.8 LAccepted-Finance | ₹11.8 L | L2 | Accepted-Finance Accepted |
| 3 | Rejected-Technical VALLUVAR NAGAR BAMBOOFLAT SOUTH ANDAMAN PIN 744107 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744107 | - | - | Rejected-Technical Due to Hard copy not submitted |
Tender Value
₹11.2 L
EMD Value
₹22,321
Closing Date
2 Mar 2026, 3:00 pmClosed
Executive Engineer, RCD, APWD, Wimberlygunj
Executive Engineer, RCD, APWD, Wimberlygunj
Providing and Laying new pipeline at Jirkatang area under RCD, Wimberly gunj.
2026_APWD_22107_1
126/EE/RCD/APWD/WG/25-26
Open Tender
Pipe Laying Works
30 days
RCD, APWD, Wimberlygunj
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
₹22,321
9 May 2026
24 Feb 2026
2 Mar 2026
25 Feb 2026
2 Mar 2026
25 Feb 2026
EARTH WORK
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
All kinds of soil.
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lif.
CEMENT CONCRETE (CAST IN SITU)
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources)
REINFORCED CEMENT CONCRETE
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
1:1.5:3(1 cement: 1.5 coarse sand (zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement:
1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
Centering and shuttering including strutting, propping etc. and removal of form for
Foundations, footings, bases of columns, etc. for mass concrete
Columns, Pillars, Piers, Abutments, Posts and Struts
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
FINISHING
12 mm cement plaster of mix:
1:4(1 cement: 4 fine sand)
WATER SUPPLY
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work
25 mm dia nominal bore
40 mm dia nominal bore
50 mm dia nominal bore
65 mm dia nominal bore
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
25 to 40 mm nominal bore
50 to 80 mm nominal bore
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
25 mm nominal bore
40 mm nominal bore
50 mm nominal bore
65 mm nominal bore
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :
25 mm diameter pipe
40 mm diameter pipe
50 mm diameter pipe
65 mm diameter pipe
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :
25 mm nominal bore
40 mm nominal bore
50 mm nominal bore
65 mm nominal bore
Providing and fixing G.I.Plug wherever required.
40 mm dia G.I Plug
50 mm dia G.I Plug
65 mm dia G.I Plug
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.07 MB
Tenderdocument126.pdf
Tender Documents • 2.22 MB
BOQ_23393.xls
BOQ • 0.25 MB
Instructions-to-bidders.pdf
Additional Documents • 0.33 MB
Download all tender documents and submit your bid