Construction of Residence Cum camp office for the Honorable MLA at Gadwal in Gadwal constituency head quarters in Mahabubnagar District (Balance Work Estimate)-(3rd call).

Earth work excavation for foundations (Manual Means) for buildings in ordinary soils and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding seigniorage and dewatering charges etc., complete as per SS 20 B (APSS 308) Ground Floor

Filling with carted gravel in trenches, sides of foundations and basement from approved quarry in layers not exceeding 15cm thick consolidating each deposit layer with watering and ramming including cost and conveyance of water, gravel to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work (APSS NO.309&310) Ground Floor

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate)using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges but including sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations , ramming, finishing top surface to the required level, curing etc., including overheads & contractors profit complete for finished item of work for levelling course under footings . (APSS No. 402)Ground Floor

Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened sand) using hard Granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., to site and excluding seigniorage charges but including sales & other taxes on all materials including labour for cutting stones to required size and shape, mixing of cement mortar, construction, curing etc.,and overheads & contractors profit complete for finished item of work for foundations and basement. (APSS No. 601 & 615) Ground Floor

Supply and placing of the Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Footings Ground Floor

Supply and placing of the Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates etc.,, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting concrete mechanically, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work upto un supported height up to 3.66 m (APSS No. 402) Lintels Ground Floor

Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site, excluding Seigniorage charges but including sales & other taxes on all materials and including all charges for mixing, centering charges, laying concrete in position, curing etc., & lift charges , and overheads & contractors profit for Bed Blocks for finished item of work. (APSS No. 402) Ground Floor

Providing thermo Mechanically Treated (TMT) reinforcement (Fe 415 grade as per IS 1786-2008 procured invariably from the primary/integrated steel producers) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete for finished item of work ( APSS No.126)Ground Floor

Brick masonry 230 mm thick for panel walls in super structure, parapet walls with cement mortar (1:8) prop (Cement:sand) using Bricks second class of size (Non-Modular or traditional size) 23 x 11 x 7 cm from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, excluding seigniorage charges but including all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing , overheads & contractors profit etc., complete for finished item of work as per SS 504. Ground Floor

Reinforced Brick Masonry for partition walls (115 mm thick) in CM (1:6) prop.(Cement:Sand) using Bricks second class or ground moulded (Non-Modular or traditional size) of size 23 x 11 x 7 cm from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. and placing 2 nos of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls wherever applicable including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, excluding cost of seigniorage charges on all materials, but including cost of scaffolding charges and all labour charges like mixing cement mortar, lift charges, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 509 & 501) Ground Floor

Ornamental plastering to ceiling 12 mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges but including sales & other taxes on all materials and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge and overheads & contractors profit etc., complete for RCC exposed faces for finished item of work. (SS 901,903 & 904) Ground Floor

Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges but including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) Ground Floor

Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges but including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) Ground Floor

Flooring with soluble salt porcelain vitrified tiles screen printed and polished of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) excluding cost of seigniorage charges on all materials, but including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc., including overheads & contractors profit complete for finished item of work. (APSS No.701 & 707) Ground Floor

Skirting with soluble salt porcelain vitrified tiles screen printed and polished of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with length equal to flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth, including cost and conveyane of all materials like tiles, cement, sand and water etc., to site excluding cost of seigniorage charges but including overheads and contractor profit complete for finished item of work.(APSS No.701 &707) The skirting should flush online with plastering. Ground Floor

Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed) excluding seigniorage charges on all materials but including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., including overheads and contractor profit complete for finished item of work. (APSS No.707 & 701) Ground Floor

Dadooing to walls with digital / polished glazed full body porcelain wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand, water, tiles, coloured cement etc., to site, excluding seigniorage on materials but including all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge.Ground Floor

S&F with 16 to 18 mm thick High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other than black (premium colours) in single piece with edges full Rounded and set over a base coat of CM (1:5) 12 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm and jointing with white cement paste mixed with pigment of matching shade to match the shade of stones (to full depth), including cost and conveyance of all materials like cement sand, water, flooring stones etc. to site excluding cost of seigniorage charges, but icluding cost of base coat and all operational and labour charges such as mixing mortar, dressing, fixing in position, half rounding, lift charges etc. including overheads & contractors profit complete for finished item of work for Treads. (APSS No.701 & 707) Ground Floor

S&F with 16 to 18 mm thick High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other than black (premium colours) in single piece set over a base coat of CM (1:5) 12 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm and jointing with white cement paste mixed with pigment of matching shade to match the shade of stones (to full depth), including cost and conveyance of all materials like cement sand, water flooring stones etc. to sitecost of excluding seigniorage charges but including cost of base coat and all operational and labour charges such as mixing mortar, dressing, fixing in position, lift charges etc. including overheads & contractors profit complete for finished item of work for Risers of stair cases (APSS No.701 & 707) Ground Floor

Supplying and fixing stainless steel hand railing, balustrade etc using 304 grade stainless steel pipes of 50 mm dia nominal bore for hand railing at 3'0" height from base level and 40 mm dia nominal bore for vertical supports placed at 5'0" c/c and two numbers 25 mm dia nominal bore for horizontal pipes placed below hand railing pipe as per the approved drawing including cost and conveyance of all materials to site, buffing charges, polishing charges, overheads & contractors profit etc using SS pipes with minimum weight of 4.57kg/Rmt for 50mm dia, 3.61kg/Rmt for 40mm dia and 2.46kg/Rmt for 25mm dia, complete for finished item of work. Ground Floor

Providing & Fixing of Openable Windows with Fly-mesh made of pre-painted steel as per IS 513 of 0.58 mm thick galvanized as per IS 277 finish painted with a polyester paint and the section for outer frame of 72 x 55mm, centre mullion of 72 x 50mm, section for fixed glass beading section of 12 x 12 mm and section for shutters of 48 x 25 mm and outer frame & mullion sections with rebate for glazed shutters, fly mesh and a 20 mm provision for guard bars/grills and fly mesh shutter section of 20 x 40 mm, stay, handles, latch 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade), fitted using rubber gaskets including fixing the windows in the concrete/masonry wall by means of self expanding screws, including 10mm Square guard bars with 6” (152.4mm) pitch , complete for Double shutter Window with vertical mullion of sizes 3’0” x 4’0” ( 914.4mm x 1219.2mm) and 4’0” x 4’0” (1219.2mm x 1219.2mm) including overheads and contractor profit etc., complete for finished item of work Ground Floor

Providing & Fixing of Openable Windows with Fly-mesh made of pre-painted steel as per IS 513 of 0.58 mm thick galvanized as per IS 277 finish painted with a polyester paint and the section for outer frame of 72 x 55mm, centre mullion of 72 x 50mm, section for fixed glass beading section of 12 x 12 mm and section for shutters of 48 x 25 mm and outer frame & mullion sections with rebate for glazed shutters, fly mesh and a 20 mm provision for guard bars/grills and fly mesh shutter section of 20 x 40 mm, stay, handles, latch 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade), fitted using rubber gaskets including fixing the windows in the concrete/masonry wall by means of self expanding screws, including 10mm Square guard bars with 6” (152.4mm) pitch , complete for a size 6’0”x4’0” (1828.8mm x1219.2mm) including overheads and contractor profit etc., complete for finished item of work Ground Floor

Providing and fixing of top hung Ventilator with fly mesh made of pre-painted steel as per IS 513 of 0.80 mm thick galvanized as per IS 277 with Zinc, finish painted with a polyester paint, section for fly-shutter of 0.6 mm thick and fitted with stainless steel 32 gauge fly mesh of 304 grade and mullions to have double rebate for glazed shutter and fly-shutter with a provision for guard bars/grills and 1 No. of High grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10 mm Square guard bars with 6” (152.4mm) pitch etc., complete for finished item of work for (i) Single fixed Louvers Ventilator window size of 2’ 0” x 2’ 0” (609.6 x 609.6mm) outer frame box section size of 100 x 45mm, fly mesh shutter frame section size 52 x 25 mm and (ii) Double fixed Louvers ventilator window Size of 4’ 0” x 2’ 0” (1219.2mm x 609.6mm) outer frame box section size of 100 x 45mm, fly mesh shutter frame section size 52 x 25 mm, vertical mullion section size of 100 x 60 mm and (iii) Double fixed Louvers Ventilator window size of 4’0” x 3’0” (1219.2mm x 914.4mm) outer frame box section size 100 x 45mm , fly mesh shutter frame section size 52 x 25 mm Vertical mullion section size of 100 x 60 mm including overheads and contractor profit etc., complete for finished item of work Ground Floor

Supplying and fixing of double shutter doors with Mild Steel Hallow single rebate general purpose door frames manufactured using cold roll formed process steel sheet of 1.25 mm thick bright (Cold Rolled Close Annealed (CRCA) and profile-B of size 105 x 60 mm conforming to IS 4351 - 2003 including pretreatment, phosphating with Hinges, Base Ties, Holdfast Lugs, Mortar Guards, shock absorbers and provision for Tower Bolts, Aldrops, Lock & Strike plates etc. for Flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping): 35 mm thick conforming to IS:2202 as per drawing including cost of Powder Coated Mild Steel fixtures of 2 No tower bolt of 250x10mm dia, 1 No. Aldrops - 300 mm long, 1no. latche-300mm long and 2 Nos. handles of 150 mm size , 2 No. 63 mm long door stopper including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work as per APSS 1001 & 1002 Ground Floor

Supply and fixing Teak Wood framed Main Door double shutter paneled door of size 0.9 M x 2.15 M with Medium Teak Wood frame of size 115 x65 mm for door shutter and 100x35 mm for panel shutters frames, Medium Teak Wood planks of 35 mm thick including fixing of 6 Nos. MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including cost of brass fixtures of 3 Nos. Brass Butt hinges (IS:205)- 150 mm Long, 1 No Brass Aldrop (IS:2681) 300 mm long, 1 No Brass latch heavy 300 mm, 1 Nos Brass Tower Bolt-10 mm Bolt (IS:204) 250 mm Long, 2 No Brass fancy handles 200 mm & 1 No Brass Door Stoppers, 1 NO Rubber/ Nylon door stop bushes including fixing the fixtures to door with required no. of brass screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads and contractors profit, complete for finished item of work as per APSS 1001 & 1002 for Ground Floor

Supplying and fixing of single shutter doors with Mild Steel Hallow single rebate general purpose door frames manufactured using cold roll formed process steel sheet of 1.25 mm thick bright (Cold Rolled Close Annealed (CRCA) and profile-B of size 105 x 60 mm conforming to IS 4351 - 2003 including pretreatment, phosphating with Hinges, Base Ties, Holdfast Lugs, Mortar Guards, shock absorbers and provision for Tower Bolts, Aldrops, Lock & Strike plates etc. for Flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping): 35 mm thick conforming to IS:2202 as per drawing including cost of Powder Coated Mild Steel fixtures of 1 No tower bolts of 250x10mm dia, 1 No. Aldrops - 300 mm long, 1no. latche-300mm long and 2 Nos. handles of 150 mm size , 1 No. door stopper,1 Nos. rubber bushes including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads and contractor profit etc., complete for finished item of work Ground Floor

Supplying and fixing of single shutter doors with Mild Steel Hallow single rebate general purpose door frames manufactured using cold roll formed process steel sheet of 1.25 mm thick bright (Cold Rolled Close Annealed (CRCA) and profile-B of size 105 x 60 mm conforming to IS 4351 - 2003 including pretreatment, phosphating with Hinges, Base Ties, Holdfast Lugs, Mortar Guards, shock absorbers and provision for Tower Bolts, Aldrops, Lock & Strike plates etc. for Flush door shutters with solid bond wood block board type with commercial ply on both faces.: 35 mm thick conforming to IS:2202 and 100mm thick PVC sheet on the rear side as per drawing including including cost of Powder Coated Mild Steel fixtures of 1 No tower bolts of 250x10mm dia, 1 No. Aldrops - 300 mm long, 1no. latche-300mm long and 2 Nos. handles of 150 mm size, 1 No. door stopper, 1 Nos. rubber bushes including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads and contractor profit etc., complete for finished item of work Ground Floor

Supply & applying Melamine Polish Glossy/ Matt finish to the wood works duly cleaning the surface and applying emery paper, Sand the wood with 180 No., emery paper and then with 320 No., emery paper, clean & wipe off loose dust, applying suitable knifing paste filler / wood filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper, apply two component wood sealer, air dry for 24 hrs, Sand with 320 No emery paper, applying one coat of approved spraying thinner (for spraying)/ applying one coat of approved brushing thinner or general purpose thinner (for brushing) and apply (either with spray or brush) two coats of approved brand melamine including cost & labour charges, emery papers, cost of thinner & melamine polish of approved brands such as Jenson & Nicholson, Asian Paints, Berger Paints or equivalent etc., including overheads & contractors profit complete for finished item of work for:-Polishing to wood work - Melamine Polishing to Wood Work. Ground Floor

Painting to flush shutters two coats of synthetic enamel paint Grade-I of approved shade having VOC content less than 50 grams/liter over wood primer coat including cost and conveyance of all materials to site cost of primer coat and all labour charges etc. complete including applying sand paper on lappam coats for neat finish including sales & other taxes on cost of all materials etc., complete including cost of overheads & contractors profit complete (APSS No.1200, 1207 & 1211) in all floors. Ground Floor

Painting to walls with two coats of water proof cement paint or snowcem or equivalent of approved brand and shade over a base coat of water based primer of exterior grade-2 of approved brand, making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for external walls for:-External Colouring - Water proof cement paint - 1+2 Coats Ground Floor

Painting to new internal walls with 2 coats of Acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Interior Grade- 1 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912. Ground Floor

Providing and applying wall putty of White Cement or Polymer or Cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. including overheads & contractors profit complete for finished item of work for Internal walls for:-Internal Colouring - Providing Putty to Internal walls Ground Floor

Providing impervious coat to surfaces 20 mm(ave) thick to required slopes with CM (1:3) prop. using screened sand mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm where ever necessary including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, excluding seigniorage charges but including sales & other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903)for sump and septic tank Ground Floor

Supply and placing of the Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates etc.,, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting concrete mechanically, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work upto un supported height up to 3.66 m (APSS No. 402) Lintels FOR FIRST FLOOR

Providing thermo Mechanically Treated (TMT) reinforcement (Fe 415 grade as per IS 1786-2008 procured invariably from the primary/integrated steel producers) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete for finished item of work ( APSS No.126) FOR FIRST FLOOR

Brick masonry 230 mm thick for panel walls in super structure, parapet walls with cement mortar (1:8) prop (Cement:sand) using Bricks second class of size (Non-Modular or traditional size) 23 x 11 x 7 cm from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, excluding seigniorage charges but including all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing , overheads & contractors profit etc., complete for finished item of work as per SS 504. FOR FIRST FLOOR

Reinforced Brick Masonry for partition walls (115 mm thick) in CM (1:6) prop.(Cement:Sand) using Bricks second class or ground moulded (Non-Modular or traditional size) of size 23 x 11 x 7 cm from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. and placing 2 nos of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls wherever applicable including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, excluding cost of seigniorage charges on all materials, but including cost of scaffolding charges and all labour charges like mixing cement mortar, lift charges, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 509 & 501) FOR FIRST FLOOR

Ornamental plastering to ceiling 12 mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges but including sales & other taxes on all materials and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge and overheads & contractors profit etc., complete for RCC exposed faces for finished item of work. (SS 901,903 & 904) FOR FIRST FLOOR

Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges but including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) FOR FIRST FLOOR

Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges but including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) FOR FIRST FLOOR

Flooring with soluble salt porcelain vitrified tiles screen printed and polished of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) excluding cost of seigniorage charges on all materials, but including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc., including overheads & contractors profit complete for finished item of work. (APSS No.701 & 707) FOR FIRST FLOOR

Skirting with soluble salt porcelain vitrified tiles screen printed and polished of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with length equal to flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth, including cost and conveyane of all materials like tiles, cement, sand and water etc., to site excluding cost of seigniorage charges but including overheads and contractor profit complete for finished item of work.(APSS No.701 &707) The skirting should flush online with plastering. FOR FIRST FLOOR

Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed) excluding seigniorage charges on all materials but including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., including overheads and contractor profit complete for finished item of work. (APSS No.707 & 701)FOR FIRST FLOOR

Dadooing to walls with digital / polished glazed full body porcelain wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand, water, tiles, coloured cement etc., to site, excluding seigniorage on materials but including all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge.FOR FIRST FLOOR

S&F with 16 to 18 mm thick High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other than black (premium colours) in single piece with edges full Rounded and set over a base coat of CM (1:5) 12 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm and jointing with white cement paste mixed with pigment of matching shade to match the shade of stones (to full depth), including cost and conveyance of all materials like cement sand, water, flooring stones etc. to site excluding cost of seigniorage charges, but icluding cost of base coat and all operational and labour charges such as mixing mortar, dressing, fixing in position, half rounding, lift charges etc. including overheads & contractors profit complete for finished item of work for Treads. (APSS No.701 & 707) FOR FIRST FLOOR

S&F with 16 to 18 mm thick High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other than black (premium colours) in single piece set over a base coat of CM (1:5) 12 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm and jointing with white cement paste mixed with pigment of matching shade to match the shade of stones (to full depth), including cost and conveyance of all materials like cement sand, water flooring stones etc. to sitecost of excluding seigniorage charges but including cost of base coat and all operational and labour charges such as mixing mortar, dressing, fixing in position, lift charges etc. including overheads & contractors profit complete for finished item of work for Risers of stair cases (APSS No.701 & 707) FOR FIRST FLOOR

Supplying and fixing stainless steel hand railing, balustrade etc using 304 grade stainless steel pipes of 50 mm dia nominal bore for hand railing at 3'0" height from base level and 40 mm dia nominal bore for vertical supports placed at 5'0" c/c and two numbers 25 mm dia nominal bore for horizontal pipes placed below hand railing pipe as per the approved drawing including cost and conveyance of all materials to site, buffing charges, polishing charges, overheads & contractors profit etc using SS pipes with minimum weight of 4.57kg/Rmt for 50mm dia, 3.61kg/Rmt for 40mm dia and 2.46kg/Rmt for 25mm dia, complete for finished item of work. FOR FIRST FLOOR

Providing & Fixing of Openable Windows with Fly-mesh made of pre-painted steel as per IS 513 of 0.58 mm thick galvanized as per IS 277 finish painted with a polyester paint and the section for outer frame of 72 x 55mm, centre mullion of 72 x 50mm, section for fixed glass beading section of 12 x 12 mm and section for shutters of 48 x 25 mm and outer frame & mullion sections with rebate for glazed shutters, fly mesh and a 20 mm provision for guard bars/grills and fly mesh shutter section of 20 x 40 mm, stay, handles, latch 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade), fitted using rubber gaskets including fixing the windows in the concrete/masonry wall by means of self expanding screws, including 10mm Square guard bars with 6” (152.4mm) pitch , complete for Double shutter Window with vertical mullion of sizes 3’0” x 4’0” ( 914.4mm x 1219.2mm) and 4’0” x 4’0” (1219.2mm x 1219.2mm) including overheads and contractor profit etc., complete for finished item of work FOR FIRST FLOOR

Providing & Fixing of Openable Windows with Fly-mesh made of pre-painted steel as per IS 513 of 0.58 mm thick galvanized as per IS 277 finish painted with a polyester paint and the section for outer frame of 72 x 55mm, centre mullion of 72 x 50mm, section for fixed glass beading section of 12 x 12 mm and section for shutters of 48 x 25 mm and outer frame & mullion sections with rebate for glazed shutters, fly mesh and a 20 mm provision for guard bars/grills and fly mesh shutter section of 20 x 40 mm, stay, handles, latch 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade), fitted using rubber gaskets including fixing the windows in the concrete/masonry wall by means of self expanding screws, including 10mm Square guard bars with 6” (152.4mm) pitch , complete for a size 6’0”x4’0” (1828.8mm x1219.2mm) including overheads and contractor profit etc., complete for finished item of work FOR FIRST FLOOR

Providing and fixing of top hung Ventilator with fly mesh made of pre-painted steel as per IS 513 of 0.80 mm thick galvanized as per IS 277 with Zinc, finish painted with a polyester paint, section for fly-shutter of 0.6 mm thick and fitted with stainless steel 32 gauge fly mesh of 304 grade and mullions to have double rebate for glazed shutter and fly-shutter with a provision for guard bars/grills and 1 No. of High grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10 mm Square guard bars with 6” (152.4mm) pitch etc., complete for finished item of work for (i) Single fixed Louvers Ventilator window size of 2’ 0” x 2’ 0” (609.6 x 609.6mm) outer frame box section size of 100 x 45mm, fly mesh shutter frame section size 52 x 25 mm and (ii) Double fixed Louvers ventilator window Size of 4’ 0” x 2’ 0” (1219.2mm x 609.6mm) outer frame box section size of 100 x 45mm, fly mesh shutter frame section size 52 x 25 mm, vertical mullion section size of 100 x 60 mm and (iii) Double fixed Louvers Ventilator window size of 4’0” x 3’0” (1219.2mm x 914.4mm) outer frame box section size 100 x 45mm , fly mesh shutter frame section size 52 x 25 mm Vertical mullion section size of 100 x 60 mm including overheads and contractor profit etc., complete for finished item of work Ventilators (2'*2'0") FOR FIRST FLOOR

Supplying and fixing of double shutter doors with Mild Steel Hallow single rebate general purpose door frames manufactured using cold roll formed process steel sheet of 1.25 mm thick bright (Cold Rolled Close Annealed (CRCA) and profile-B of size 105 x 60 mm conforming to IS 4351 - 2003 including pretreatment, phosphating with Hinges, Base Ties, Holdfast Lugs, Mortar Guards, shock absorbers and provision for Tower Bolts, Aldrops, Lock & Strike plates etc. for Flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping): 35 mm thick conforming to IS:2202 as per drawing including cost of Powder Coated Mild Steel fixtures of 2 No tower bolt of 250x10mm dia, 1 No. Aldrops - 300 mm long, 1no. latche-300mm long and 2 Nos. handles of 150 mm size , 2 No. 63 mm long door stopper including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work as per APSS 1001 & 1002 FOR FIRST FLOOR

Supply and fixing Teak Wood framed Main Door single shutter paneled door of size 0.9 M x 2.15 M with Medium Teak Wood frame of size 115 x65 mm for door shutter and 100x35 mm for panel shutters frames, Medium Teak Wood planks of 35 mm thick including fixing of 6 Nos. MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including cost of brass fixtures of 3 Nos. Brass Butt hinges (IS:205)- 150 mm Long, 1 No Brass Aldrop (IS:2681) 300 mm long, 1 No Brass latch heavy 300 mm, 1 Nos Brass Tower Bolt-10 mm Bolt (IS:204) 250 mm Long, 2 No Brass fancy handles 200 mm & 1 No Brass Door Stoppers, 1 NO Rubber/ Nylon door stop bushes including fixing the fixtures to door with required no. of brass screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads and contractors profit, complete for finished item of work as per APSS 1001 & 1002 FOR FIRST FLOOR

Supplying and fixing of single shutter doors with Mild Steel Hallow single rebate general purpose door frames manufactured using cold roll formed process steel sheet of 1.25 mm thick bright (Cold Rolled Close Annealed (CRCA) and profile-B of size 105 x 60 mm conforming to IS 4351 - 2003 including pretreatment, phosphating with Hinges, Base Ties, Holdfast Lugs, Mortar Guards, shock absorbers and provision for Tower Bolts, Aldrops, Lock & Strike plates etc. for Flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping): 35 mm thick conforming to IS:2202 as per drawing including cost of Powder Coated Mild Steel fixtures of 1 No tower bolts of 250x10mm dia, 1 No. Aldrops - 300 mm long, 1no. latche-300mm long and 2 Nos. handles of 150 mm size , 1 No. door stopper,1 Nos. rubber bushes including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads and contractor profit etc., complete for finished item of work FOR FIRST FLOOR

Supplying and fixing of single shutter doors with Mild Steel Hallow single rebate general purpose door frames manufactured using cold roll formed process steel sheet of 1.25 mm thick bright (Cold Rolled Close Annealed (CRCA) and profile-B of size 105 x 60 mm conforming to IS 4351 - 2003 including pretreatment, phosphating with Hinges, Base Ties, Holdfast Lugs, Mortar Guards, shock absorbers and provision for Tower Bolts, Aldrops, Lock & Strike plates etc. for Flush door shutters with solid bond wood block board type with commercial ply on both faces.: 35 mm thick conforming to IS:2202 and 100mm thick PVC sheet on the rear side as per drawing including including cost of Powder Coated Mild Steel fixtures of 1 No tower bolts of 250x10mm dia, 1 No. Aldrops - 300 mm long, 1no. latche-300mm long and 2 Nos. handles of 150 mm size, 1 No. door stopper, 1 Nos. rubber bushes including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads and contractor profit etc., complete for finished item of work FOR FIRST FLOOR

Supply & applying Melamine Polish Glossy/ Matt finish to the wood works duly cleaning the surface and applying emery paper, Sand the wood with 180 No., emery paper and then with 320 No., emery paper, clean & wipe off loose dust, applying suitable knifing paste filler / wood filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper, apply two component wood sealer, air dry for 24 hrs, Sand with 320 No emery paper, applying one coat of approved spraying thinner (for spraying)/ applying one coat of approved brushing thinner or general purpose thinner (for brushing) and apply (either with spray or brush) two coats of approved brand melamine including cost & labour charges, emery papers, cost of thinner & melamine polish of approved brands such as Jenson & Nicholson, Asian Paints, Berger Paints or equivalent etc., including overheads & contractors profit complete for finished item of work for:-Polishing to wood work - Melamine Polishing to Wood Work.FOR FIRST FLOOR

Painting to flush shutters two coats of synthetic enamel paint Grade-I of approved shade having VOC content less than 50 grams/liter over wood primer coat including cost and conveyance of all materials to site cost of primer coat and all labour charges etc. complete including applying sand paper on lappam coats for neat finish including sales & other taxes on cost of all materials etc., complete including cost of overheads & contractors profit complete (APSS No.1200, 1207 & 1211) in all floors.FOR FIRST FLOOR

Painting to walls with two coats of water proof cement paint or snowcem or equivalent of approved brand and shade over a base coat of water based primer of exterior grade-2 of approved brand, making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for external walls for:-External Colouring - Water proof cement paint - 1+2 Coats FOR FIRST FLOOR

Painting to new internal walls with 2 coats of Acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Interior Grade- 1 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912. FOR FIRST FLOOR

Providing and applying wall putty of White Cement or Polymer or Cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. including overheads & contractors profit complete for finished item of work for Internal walls for:-Internal Colouring - Providing Putty to Internal walls FOR FIRST FLOOR

Supplying and fixing Gyp Board Fine Line Grid false ceiling (GS-FLC-4.6 as per India Gypsum) in size 600 mm x 600 mm using Gypsum Board tiles of size not less than 0.595 M x 0.595 M of 12.5 mm thick as per IS 2095 -1992 fixing to Gyp steel precoated GI wall angle of size 25 mm x 25 mm x of 0.70 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using precoated GI Tee section (24 mm x 38 mm x 0.7 mm) from soffit at 1220 mm c/c fixed with GI Soffit Cleat, rawl plugs and steel expansion fasteners & connecting clip to the GI T section with 4 mm dia GI Rod with galvanised spring steel level clip of PVC unversal holding clips system at 1200 mm c/c and fixing the 12.5 mm / 9.5 mm Gypboard Sheet tiles of size 595 mm x 595 mm or 595 mm x 1195 mm and finishing two coats of drywall topcoat complete for finished item of work as per India Gypsum Ltd specification including Overheads & Contractors profit complete for finished item of work in all floors. FOR FIRST FLOOR

Constructing 904.0 mm (3’0”) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plaste Water supply and sanitary arrangments

Supplying, laying, jointing and testing 101.6 mm SWG SP-1 pipes of ISI make conforming to ISI 651 & 4127 with airtight cement joints in CM 1:5:1 prop. including excavation of trenches and socket pits in any soil (except rock requiring blasting) up to 914.4 mm (3'0") depth and refilling with watering and tamping to the required slope including cost and conveyance of all materials to site and all labour charges , overheads & contractor profit etc., complete for finished item of work. Water supply and sanitary arrangments

Supplying & fixing 150 mm x 100 mm SWG gully traps conforming to ISI 651 & 4127 with C.I Grating & Cost. Brick masonry in CM 1:6 prop. Intermediate chamber and fitted with 304.8 mm x 288.6mm (12"x9") C.I Frame and hinged cover including Overheads & Contractors profit complete for finished item of work. Water supply and sanitary arrangments

Constructing 904.0 mm (3’0”) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification including Overheads & Contractors profit complete for finished item of work.Water supply and sanitary arrangments

Supply, Installation and commissioning approved make floor mounted Close Coupled wash down EWC conforming to IS:2556 (Part 8)-2004 with 'P' or 'S' trap with dual flush porcelain cistern fixed on wash down EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap & 15 mm angle stop cock & 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects: Special Colour -Grade - III including Overheads & Contractors profit .Water supply and sanitary arrangments

Supplying and fixing of 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm - including laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees with doors, etc with solvent jointing as per standard practice including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete but excluding cost of fixtures for finished item of work at all floor levels for 3'' dia for Water Supply and Sanitary Arrangements. Water supply and sanitary arrangments

Supplying and fixing of 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm - including laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees with doors, etc with solvent jointing as per standard practice including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete but excluding cost of fixtures for finished item of work at all floor levels for 4'' dia for Water Supply and Sanitary Arrangements. Water supply and sanitary arrangments

Supplying & Fixing Indian make below counter Wash Hand Basin 1st quality with waste fittings like rubberplug, chain, 32 mm nominal size C.P. Fitting with parallelpipe thread conforming to IS:2963-1979 complete with standard CI brackets including wooden block - including Overheads & Contractors profit complete for finished item of work. Water supply and sanitary arrangments

Supplying and Fixing Pedestal for Wash Hand Basin including Overheads & Contractors profit complete for finished item of work.- COLOURED Water supply and sanitary arrangments

Supplying & fixing SINGLE BOWL stainless steel sink size 24"x18"x8 " (609.6 x 457.2 x 203.2mm) 1 mm thick with accessories including Overheads & Contractors profit complete for finished item of work. Water supply and sanitary arrangments

Supplying & Fixing COLOURED glazed flat back half stall urinals1st quality conforming to IS:2556-1995 with standard C.P.Spreader fixed with screws complete Indian make : 590 x 375 x 390 mm including Overheads & Contractors profit complete for finished item of work. Water supply and sanitary arrangments

S&F of 15 mm brass body premium variety Chromium Plated finish bib tap angular shape with wall flange of not less than 500 grams weight with quarter turn spindle with either internal or external threaded connection conforming to IS 8931 and with 7 - 10 years warranty including Overheads & Contractors profit complete for finished item of work. Water supply and sanitary arrangments

S&F of Chromium plated finish brass body quarter turn Bibcock cum Health Faucet with 1m long tube and wall hook with 7 - 10 years warranty including Overheads & Contractors profit complete for finished item of work. Water supply and sanitary arrangments

S&F of 15 mm brass body CP finish wall mounted sink spout with connecting legs & wall flanges swinging nozzle conforming to IS 8931 and with a warranty of 10 years including Overheads & Contractors profit complete for finished item of work. Water supply and sanitary arrangments

S&F of 15 mm premium variety Chromium plated finish brass body wall mixer with hand shower with a provision for over head shower with 115 mm long bend pipe on upper side, connecting legs & wall flanges conforming to IS 8931 with 7 - 10 years warranty including Overheads & Contractors profit complete for finished item of work. Water supply and sanitary arrangments

S&F of Towel rod 24 " premium make powder coated stainless steel body with 7 - 10 years warranty including Overheads & Contractors profit complete for finished item of work. Water supply and sanitary arrangments

S&F premium make CPVC Pipes -SDR 13.5 in ground or on wall including cost of tees, elbows, bends, reducers, couplings, running joints, union flanges, unions etc. with necessary excavation in all types of soils except rock requiring blasting, refilling, chiselling masonry walls and making good the walls & floors to the original surface and fixing MS clamps on TW blocks on walls including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work at all floor levels for 15.90 mm diameter for water supply and Sanitary Arrangements Water supply and sanitary arrangments

S&F premium make CPVC Pipes -SDR 13.5 in ground or on wall including cost of tees, elbows, bends, reducers, couplings, running joints, union flanges, unions etc. with necessary excavation in all types of soils except rock requiring blasting, refilling, chiselling masonry walls and making good the walls & floors to the original surface and fixing MS clamps on TW blocks on walls including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work at all floor levels for 22.20 mm diameter for water supply and Sanitary Arrangements Water supply and sanitary arrangments

S&F premium make CPVC Pipes -SDR 13.5 in ground or on wall including cost of tees, elbows, bends, reducers, couplings, running joints, union flanges, unions etc. with necessary excavation in all types of soils except rock requiring blasting, refilling, chiselling masonry walls and making good the walls & floors to the original surface and fixing MS clamps on TW blocks on walls including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work at all floor levels for 34.90 mm diameter for water supply and Sanitary Arrangements Water supply and sanitary arrangments

S&F Bronze Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type including Overheads & Contractors profit complete for finished item of work 25.00 mm diameter for water supply and Sanitary Arrangements Water supply and sanitary arrangments

S&F Bronze Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type including Overheads & Contractors profit complete for finished item of work 32.00 mm diameter for water supply and Sanitary Arrangements Water supply and sanitary arrangments

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks including Overheads & Contractors profit complete for finished item of work. Water supply and sanitary arrangments

Supply & Fixing 40 mm nominal size dia PVC solid wastepipe outlet including Overheads & Contractors profit complete for finished item of work. Water supply and sanitary arrangments

S&F: 3" (75 mm nominal size ) Nahany Trap with Jali UPVC/SWR Pipe fittings including Overheads & Contractors profit complete for finished item of work. Water supply and sanitary arrangments

Supplying & Fixing 15 mm nominal size PVC connection with brass union nut C.P coated including Overheads & Contractors profit complete for finished item of work. Water supply and sanitary arrangments

S&F 15 mm nominal size Chromium plated finish brass over head shower arm of 450 mm long with 90 degree bend & wall flange suitable for rain shower and with 7 - 10 years warranty including Overheads & Contractors profit complete for finished item of work. Water supply and sanitary arrangments

Supply & Fixing Double coat hook with 7 - 10 years warranty including Overheads & Contractors profit complete for finished item of work. Water supply and sanitary arrangments

S&F CP finish brass soap dish including Overheads & Contractors profit complete for finished item of work. Water supply and sanitary arrangments

Supply and Laying of ISI 25mm outer dia heavy grade IS:9537 part 3 rigid PVC pipe concealed in Roof Slabs with all required Metallic Deep Boxes including labour charges etc., complete. Makes: Sudhakar / Finolex / Modi / Polycab Internal and external Electrical Installations.

Supply and laying of ISI 25mm outer dia medium grade with IS:9537 part 3 rigid PVC pipe concealed in wall with PVC / Metallic junction boxes, accessories including masonary work for light, fan and separate plug point including chisseling brick work, engaging skilled mason for fine wall cement plastering & all labour charges etc., complete. Makes: Sudhakar / Finolex / Modi / Polycab Internal and external Electrical Installations.

Supply and laying of ISI 25mm outer dia medium grade with IS:9537 part 3 rigid PVC pipe consealed in wall with all required Metallic Junction Boxes including masonary work and labour charges etc., complete for Run of mains. Makes: Sudhakar / Finolex / Modi / Polycab DATA 3: Internal and external Electrical Installations.

Wiring with run of 2 of 1.5 Sqmm FRLSH / HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable make in existing pipe including supply and fixing of 3 Plate Jumbo Ceiling Rose / Batten Holder and 6A ISI marked Modular type switch including cost and conveyance of all material and all labour charges etc., complete for light and bell points in N.R.B. Copper Cable Makes : Finolex / RR kabel / Havells / Polycab / KEI (HFFR) Accessories Makes : : Legrand Lyncus / GM Four Five / Goldmedal Curve / Million m way / Anchor Roma Plus / Crabtree Verona / Panasonic Vision / Hager Insista / Benlo Vesta / C&S Primo / CPL Vysma / Polycab Levana / Salzar - Elite / Elleys E-Soft / Fybros Four-X Ceiling Rose / BH Makes :GM G Home / Gold Medal Olive / Million Zoom / Anchor Internal and external Electrical Installations.

Wiring with run of 2 of 1.5 Sqmm FRLSH / HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable make in existing pipe including supply and fixing of 3 Plate Jumbo Ceiling Rose / Batten Holder and 6A ISI marked Modular type switch including cost and conveyance of all material and all labour charges etc., complete for light and bell points in R.B. Copper Cable Makes : Finolex / RR kabel / Havells / Polycab / KEI (HFFR) Accessories Makes : : Legrand Lyncus / GM Four Five / Goldmedal Curve / Million m way / Anchor Roma Plus / Crabtree Verona / Panasonic Vision / Hager Insista / Benlo Vesta / C&S Primo / CPL Vysma / Polycab Levana / Salzar - Elite / Elleys E-Soft / Fybros Four-X Ceiling Rose / BH Makes :GM G Home / Gold Medal Olive / Million Zoom / Anchor Internal and external Electrical Installations.

Wiring with run of 3 of 1.5 Sqmm FRLSH / HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable make in existing pipe including supply and fixing of 3 Plate Jumbo Ceiling rose of 6A ISI marked Modular type switch including cost and conveyance of all material and all labour charges etc., complete for fan and exhaust fan points in N.R.B. Copper Cable Makes : Finolex / RR kabel / Havells / Polycab / KEI (HFFR) Accessories Makes : : Legrand Lyncus / GM Four Five / Goldmedal Curve / Million m way / Anchor Roma Plus / Crabtree Verona / Panasonic Vision / Hager Insista / Benlo Vesta / C&S Primo / CPL Vysma / Polycab Levana / Salzar - Elite / Elleys E-Soft / Fybros Four-X Ceiling Rose / BH Makes :GM G Home / Gold Medal Olive / Million Zoom / Anchor Internal and external Electrical Installations.

Wiring with run of 3 of 1.5 Sqmm FRLSH / HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable make in existing pipe including supply and fixing of 3 Plate Jumbo Ceiling rose of 6A ISI marked Modular type switch including cost and conveyance of all material and all labour charges etc., complete for fan and exhaust fan points in R.B. Copper Cable Makes : Finolex / RR kabel / Havells / Polycab / KEI (HFFR) Accessories Makes : : Legrand Lyncus / GM Four Five / Goldmedal Curve / Million m way / Anchor Roma Plus / Crabtree Verona / Panasonic Vision / Hager Insista / Benlo Vesta / C&S Primo / CPL Vysma / Polycab Levana / Salzar - Elite / Elleys E-Soft / Fybros Four-X Ceiling Rose / BH Makes :GM G Home / Gold Medal Olive / Million Zoom / Anchor Internal and external Electrical Installations.

Supply and fixing of ISI Marked 6A/10A 3/2 pin Modular socket with shutter with 6A/10A 1way Modular switch on a common switch board Module box with cover frame with connections including cost and conveyance of all materials and all labour charges etc., complete in N.R.B. / R.B. Accessories Makes : : Legrand Lyncus / GM Four Five / Goldmedal Curve / Million m way / Anchor Roma Plus / Crabtree Verona / Panasonic Vision / Hager Insista / Benlo Vesta / C&S Primo / CPL Vysma / Polycab Levana / Salzar - Elite / Elleys E-Soft / Fybros Four-X Internal and external Electrical Installations.

Supply and fixing of ISI marked 16A 3pin / 6A 3 Pin 1 way Modular combi socket with shutter, 16 Amps Modular switch on a 3 Modular box with suitable cover frame with connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B. / R.B. Accessories Makes : : Legrand Lyncus / GM Four Five / Goldmedal Curve / Million m way / Anchor Roma Plus / Crabtree Verona / Panasonic Vision / Hager Insista / Benlo Vesta / C&S Primo / CPL Vysma / Polycab Levana / Salzar - Elite / Elleys E-Soft / Fybros Four-X Internal and external Electrical Installations.

Supply and fixing of ISI marked 2Nos 6A Modular type switches, 2Nos 6A 3/2 pin wall plug sockets with shutter on 6 Modular box with cover frame including connections, cost and conveyance of all material and all labour charges etc., complete in N.R.B. / R.B. AccessoriesMakes : : Legrand Lyncus / GM Four Five / Goldmedal Curve / Million m way / Anchor Roma Plus / Crabtree Verona / Panasonic Vision / Hager Insista / Benlo Vesta / C&S Primo / CPL Vysma / Polycab Levana / Salzar - Elite / Elleys E-Soft / Fybros Four-X Internal and external Electrical Installations.

Supply and fixing of ISI marked 3 Nos 6A Modular type switches, 3Nos 6A 3/2 pin wall plug sockets with shutter on 9 Modular box with cover frame including connections, cost and conveyance of all material and all labour charges etc., complete in N.R.B. / R.B. AccessoriesMakes : : Legrand Lyncus / GM Four Five / Goldmedal Curve / Million m way / Anchor Roma Plus / Crabtree Verona / Panasonic Vision / Hager Insista / Benlo Vesta / C&S Primo / CPL Vysma / Polycab Levana / Salzar - Elite / Elleys E-Soft / Fybros Four-X Internal and external Electrical Installations.

Supply, transportation and fixing of 22W +/ 10% , >/ 2300 lumens, 1200 mm (+/- 10%) length LED light housing made with alluminium anodised body, wide operating voltage with PF≥0.9, Surge protection: > 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department as per IS, minimum CRI≥80 etc., complete with 2 years warranty with BIS Certification with BIS Certification. LUMINAIRE MAKE : Phillips / Crompton / Havells LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM LEDs Internal and external Electrical Installations.

Supply, Transportation and Fixing of 18W +/- 10% LED back lit LED Down Light Recessed / Surface mounting round / square with housing made of Powder coated Pressure die cast aluminium housing with extended heat sink, with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor > 0.9, Surge protection: > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI >80, and THD is less than 15% etc., complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE : Phillips / Wipro / Crompton / Havells LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / LG LEDs. Internal and external Electrical Installations.

Supply, Transportation and Fixing of 12W +/- 10% LED back lit LED Down Light Recessed / Surface mounting round / square with housing made of Powder coated Pressure die cast aluminium housing with extended heat sink, with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor > 0.9, Surge protection: > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI >80, and THD is less than 15% etc., complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE : Phillips / Wipro / Crompton / Havells LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / LG LEDs. Internal and external Electrical Installations.

Supply, Transportation and Fixing of energy efficient fan, 1200 mm sweep, aluminium body, consuming 28 W, BEE 5 star rated, ceiling fan with Brush Less Direct Current(BLDC)motor, class of insulation: B, 3No's blades, 30cm long down rod, 2No's canopies, shackle'kit, safety rope, copper winding, Power Factor greater than 0.90, Service Value (CMMAV) greater than 8.5, Air delivery minimum 235 CMM, 350 RPM(tolerance as per IS:374-2019), THD less than 10%. with remote or compatible to electronic step type regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C(max), insulation resistance more than 2 mega ohm, suitable for 230V, 50 HZ, single phase AC supply, earthing etc., including all standard accessories etc., complete but without regulator including all standard accessories with twin core flat copper wire of Finolex / RR kabel / Havells connections and all labour charges etc., complete. Makes : Atomberg (Efficio ) / Havells / Crompton Internal and external Electrical Installations.

Supply and fixing of modular Stepped electronic regulator with connections and Labour charges etc complete. Makes : Legrand Lyncus / GM Four Five / Goldmedal Curve / Million m way / Anchor Roma Plus / Crabtree Verona / Panasonic Vision / Hager Insista / Benlo Vesta / C&S Primo / CPL Vysma / Polycab Levana / Salzar - Elite / Elleys E-Soft / Fybros Four-X Internal and external Electrical Installations.

Supply, Transportation and Fixing of light duty 9" (225mm) ISI, Fresh Air fan ISI marked, Fresh Air fan with metallic body and blades with all labour charges etc., complete as directed at site. Makes :Crompton / Havells Ventilair-DB / Orient hill air. Internal and external Electrical Installations.

Supply and fixing of Ding Dong Bell of makes GM / Million / Gold Medal / Anchor / Great white,in lieu of Ceiling rose, including giving connections, cost of all accessories and labour charges etc., complete. Internal and external Electrical Installations.

Supply and fixing of Electronic Musical Bell of Makes : GM / Million / Gold Medal / Anchor in lieu of Ceiling rose including giving connections, cost of all accessories and labour charges etc., complete. Internal and external Electrical Installations.

Supply and Run of 3 of 2.50 Sq.mm FRLSH / HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS17048 specification for Copper cable in existing pipe for run of mains including connections and all labour charges etc., complete. Makes : Finolex / Havells / Polycab / KEI (HFFR) Internal and external Electrical Installations.

Supply and Run of 3 of 4.00 Sq.mm FRLSH / HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS17048 specification for Copper cable in existing pipe for run of mains including connections and all labour charges etc., complete. Makes : Finolex / Havells / Polycab / KEI (HFFR) Internal and external Electrical Installations.

Supply and Run of 5 of 6.00 Sq.mm FRLSH / HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS17048 specification for Copper cable in existing pipe for run of mains including connections and all labour charges etc., complete. Makes : Finolex / Havells / Polycab / KEI (HFFR) Internal and external Electrical Installations.

Supply and Run of 5 of 10.00 Sq.mm FRLSH / HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS17048 specification for Copper cable in existing pipe for run of mains including connections and all labour charges etc., complete. Makes : Finolex / Havells / Polycab / KEI (HFFR) Internal and external Electrical Installations.

Supply and Run of LAN Cable cat - 6 UTP cable of makes D Link / AMP / Molex / Legrand / Krone / Finolex / Polycab in existing pipe inlcuding all labour charges etc., complete as desired by the department. Internal and external Electrical Installations.

Supply and fixing of Cat 6 RJ-45 information outlets including duel face plate of makes D Link / AMP / Molex / Legrand / Krone on required size Modular Box with cover frame with connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B. Makes : Legrand Lyncus / GM Four Five / Goldmedal Curve / Million m way / Anchor Roma Plus / Crabtree Verona / Panasonic Vision / Hager Insista / Benlo Vesta / C&S Primo / CPL Vysma / Polycab Levana / Salzar - Elite / Elleys E-Soft / Fybros Four-X Data.25 Internal and external Electrical Installations.

Supply and run of 2 pair telephone cable 0.5mm copper, in the existing PVC pipe including all labour charges etc complete. Internal and external Electrical Installations.

Supply and fixing of Modular socket type Telephone jack with Connector on required size Modular Box with cover frame with connections including cost and conveyance of all material and all labour charges etc., complete in R.B. Makes:Legrand Lyncus / GM Four Five / Goldmedal Curve / Million m way / Anchor Roma Plus / Crabtree Verona / Panasonic Vision / Hager Insista / Benlo Vesta / C&S Primo / CPL Vysma / Polycab Levana / Salzar - Elite / Elleys E-Soft / Fybros Four-X Internal and external Electrical Installations.

Supply and laying of RG6 co-axial cable in the existing metallic/non metallic conduit pipe with connections etc.,complete for TVs Makes: Finolex/ RR kabel/Havells Internal and external Electrical Installations.

Supply and fixing of Modular TV antenna out let on modular box with cover frame in existing consealed pipe wiring including cost and coveyance of all material and all labour charges etc., complete in N.R.B. / R.B. Makes:Legrand Lyncus / GM Four Five / Goldmedal Curve / Million m way / Anchor Roma Plus / Crabtree Verona / Panasonic Vision / Hager Insista / Benlo Vesta / C&S Primo / CPL Vysma / Polycab Levana / Salzar - Elite / Elleys E-Soft / Fybros Four-X Internal and external Electrical Installations.

Supply, Transportation and fixing of 30-36 W +/-10% (>=3600 Lumens) Back lit, 2' x2' (600mm x 600mm) Recessed / Surface mounted LED luminaire made of CRCA sheet housing with powder coated with high efficiency acrylic wide diffuser, with wide operating voltage range, Power factor > 0.9, Surge protection >2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department, CRI >80, and THD is less than 15% etc., complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE : Phillips / Wipro / Crompton / Bajaj /Havells LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs. Internal and external Electrical Installations.

Wiring with run of 2 of 1.5 Sqmm FRLSH / HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable make in existing pipe including supply and fixing of 3 Plate Jumbo Ceiling Rose / Batten Holder and 6A ISI marked Modular type switch including cost and conveyance of all material and all labour charges etc., complete for staircase points in N.R.B/RB. Copper Cable Makes : Finolex / Havells / Polycab / KEI (HFFR) Makes:Legrand Lyncus / GM Four Five / Goldmedal Curve / Million m way / Anchor Roma Plus / Crabtree Verona / Panasonic Vision / Hager Insista / Benlo Vesta / C&S Primo / CPL Vysma / Polycab Levana / Salzar - Elite / Elleys E-Soft / Fybros Four-XCeiling Rose / BH Makes :GM G Home / Gold Medal Olive / Million Zoom Internal and external Electrical Installations.

Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II) Internal and external Electrical Installations.

Supply and Run of 25mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete. (1.18Kgs/1Mtr) Data.33 Internal and external Electrical Installations.

Supply, transportation and fixing of 60 / 65 W +/-10% (>=6500 Lumens) LED Street light Body made of high grade pressure die –cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover / temperature protective custom molded polycarbonate diffuser, Thermal shock and impact resistant IK07 fixed to the housing by SS screws Suitable lense on LEDs, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F > 0.90, System having efficacy >120 lumens / watt, with Ingress protection IP66, BIS approved Potted driver, Driver surge protection >10KV, THD<15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI>70, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with 5 years warranty. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates. LUMINAIRE MAKE : PHILIPS / CROMPTON / BAJAJ / Wipro / HAVELLS LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs and fixing of luminaire as directed at site with and connections with 2 of WPSC / 1 of WPTC of 2.5 Sqmm wire ISI marked of makes Finolex / RR kabel / Payal ,etc complete Internal and external Electrical Installations.

Supply and fixing of 4 Way TPN DB Horizontal with IP 43 Protection as per IS:13032 with 1 No 40A FP Isolator and 12 Nos 6-32 A 10kA ISI Marked C/D curve SP MCBs with 100 A tinned copper busbar, neutral bar, earth bar and cable ties for cable management, fully shrouded neutral bar, din bars and detachable gland plate etc complete with inter connectionss and labour charges for Surface/Flush Mounting etc., complete. DB Makes :Legrand / Schneider / Siemens / LK(L&T) / Crabtree Xpro / ABB MCB Makes :Legrand-DX3 / Schneider-Acti9 / Siemens / L&T / Hager. Internal and external Electrical Installations.

Supply and fixing of 4 Way VTPN DB with IP 43, Protection as per IS:13032 and suitable for 1 No 100A FP Isolato as incomer and Outgoings are 2Nos 50-63A TP MCB's and 10Nos 6-32A SP MCBs with 100 A tinned copper busbar, neutral bar, earth bar and cable ties for cable management, fully shrouded neutral bar, din bars and detachable gland plate etc complete including connections and labour charges for Surface/Flush Mounting etc., complete. DB Makes : Legrand / Schneider / Siemens / L&T / Hager / Cabtree Xpro. Isolator, MCB Makes :Legrand-DX3 / Schneider-Acti9 / Siemens / L&T / Hager / Cabtree. Internal and external Electrical Installations.

Supply and fixing of 19/20mm dia steel tube down rod for ceiling fan in lieu of company fan down rod for ceiling fan along with bolts and nuts including all labour charges etc., complete. Internal and external Electrical Installations.

Supply and laying of 50 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I). Makes : Torrent / Polycab / Havells / Gloster / KEI / Finolex / RR kable. Internal and external Electrical Installations.

Earth work excavation of Trench in hard ground soil and Sand filling shall be provided at the bottom of trench before laying the cable and laying of U.G cables up to 50 sqmm covering the cable with back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges etc., complete. Internal and external Electrical Installations.

Labour charges for run of U.G cable on wall / existing pipe with necessary fixing arrangments such as saddles, clamps,wooden separators etc., complete (as directed by departmental official). Internal and external Electrical Installations.

Supply and Fixing of single compression heavy duty brass cable glands for 3.5 core 50 Sqmm XLPE armoured cable with brass washers etc., complete. Internal and external Electrical Installations.

Supply and Fixing of crimping type alluminium lugs confirming to IS specifications for cables of 50Sqmm including nuts and bolts with conections etc., complete. Internal and external Electrical Installations.

Supply and fixing of DB with 1 No 20A single phase plug and Socket, in sheet steel enclosure with 1 No 10A to 20A 10 KA ISI Marked C/D curve SP MCB including internal connection and labour charges for Flush Mounting etc., complete. DB Makes :Legrand / Schneider / Siemens / LK /Crabtree Xpro / ABB / C&S / BCH MCB Makes : Legrand-DX3 / Schneider-Acti9 /Siemens / LK (L&T) Exora / Crabtree / IndoAsian / BCH Internal and external Electrical Installations.