REPAIRS / MAINTENANCE TO FENCING, BOUNDARY WALL, JAFRI WALL, PLASTERING, GATES, TRAPS AND ALLIED WORK SERVICES UNDER AGE B/R-II UNDER GE (CENTRAL) KIRKEE.

Amount

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground surfaces complete all as specified and as directed.

Excavating in post holes each n.exc. 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm thick watering and removing surplus soil to a distance n.exc. 50 m and making good surface in hard /dense soil complete all as specified and as directed..

Material and labour for Plain Cement Concrete as in foundation filling in post/strut and mass concrete, type C-2, (1:3:6), using 40 mm graded stone aggregate complete all as specified and as directed.

Material and labour for rolled mild steel work conforming to Fe-410-0 or Fe-310-0 Grade for fencing posts and struts in fencing including cutting bending top to shape as directed drilling holes matching for barbed wire, including fillet on back side of fencing post and all necessary drilling work complete all as specified and as directed.

Dismantling mild steel work of any description and in any position complete all as directed by Engr-in-Charge.

Material and labour for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering to doors etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410-W(Gde- E-250) quality-A complete all as specified and as directed.

Supply and fix, in repairs, Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing & straining and fixing to any type of post including screwing or tying at crossings with and provision of galvanised mild steel wire, staples as directed including taking out existing damaged barbed wire complete all as specified and as directed.

Material and labour for rolled mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders,walk ways; railings con forming to Fe.290.Gde-E-165 complete all as specified and as directed.

Dismantling chainlink fencing of any gauge & size not exceeding 4 Kg/Sqm complete all as directed by Engr-in-Charge.

Supply only chain link fencing using 3.15mm dia GI wire mesh including line wires, any mesh, size & type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size & type to any type of standards, rails, straining blots, etc. including provision of binding wire complete all as specified and directed.

Supply and fix rolled mild steel as in flat iron of size as directed as in fixing clamps or support to chain link fencing, stifners etc fixed with nut and bolts including making necessry holes complete all as specified and as directed.

Supply and fix 10mm dia and over mild steel round bars cut to length bent to shape for stiffeners etc and similar work complete all as specified and as directed.

Supply and fix rolled mild steel screw bolts (machine made) 5 to 10mm dia of shank with hexagonal or square heads at one end and screwed the other, each screw end to be fitted with washers and one hexagonal or square nut exc 5cm but n.exc. 10cm long complete all as specified and as directed.

Material and labour for preparation of new steel and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Demolition of PCC in any position not otherwise specifically provided for, as in surface channel, drains, manholes, copings, ground floors and pavings of any description and in any position and removing debris out side MD land complete all as specified and as directed by Engr-in-Charge.

Material and labour for Plain Cement concrete (1:4:8), type D2, using 40mm graded stone aggregate as in sub bases of floors, 100mm thick, complete all as specified and as directed.

Material and labour for Plain Cement concrete (1:4:8), type D2, using 40mm graded stone aggregate as in sub bases of floors, 75mm thick, complete all as specified and as directed.

Material and labour for crushed stone dust/sand filling under floors or in foundations, 25mm thick, including watering and consolidation complete all as specified and as directed.

Material and labour for 60mm thick machine pressed glossy finish precast cement concrete interlocking paver blocks of any shape, size and colour M-35 grade with grey cement and pigment conforming to IS 15658-2006 and including dismantling of exisiting pavers of any type and description complete all as specified and as directed.

Dismantling of precast interlocking paver blocks laid dry of any description, thickness and size complete all as specified and as directed.

Plain Cement Concrete, type B1, (1:2:4) using 20 mm graded crushed stone aggregate, 100mm thick laid in alternate bays (not exceeding 4 Sqm each) finishing the concrete surfaces even and fair at top without using extra cement and providing joints throughout the thickness, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as specified and directed.

Finishing surface of concrete by brooming with brooms whilst concrete is green complete all as specified and as directed.

Material and labour for screed bed or bedding layer of mortar 20mm thick average thickness for laying floor finishes in cement mortar (1:6) complete all as specified and as directed.

Material and labour for coloured glossy finish chequered cement concrete tiles of size 30 cm x 30 cm x25 mm thick with grey cement and pigment, set, jointed and pointed in neat cement slurry in floors over existing screed bed complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement/cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

Material and labour for pre cast cement concrete solid block masonry with solid blocks of the grade C1 (1:3:6) set in CM (1:6) complete all as specified and as directed.

All as per Sl Item No. 27 above but except PCC blocks. NOTE :- PCC blocks as obtained from demolition of Sl Item No. 26 above shall be re used.

Material and labour for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and directed.

All as per Sl Item No. 29 above but except bricks. NOTE :- Bricks as obtained from demolition of Sl Item No. 26 above shall be re used.

Material and labour for providing plain cement concrete type B-1 (1:2:4) using 20 mm graded crushed stone aggregate as in coping/benching and the like including necessary form work complete all as specified and as directed.

Racking out joints/pointing to random rubble or polygonal rubble uncorsed or brought up to courses masonry built in cement or lime mortar, complete all as specified.

Taking down cement or cement lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge.

Material and labour rendering 15 mm thick on fair faces of brick/block masonry surfaces of wall in CM (1:4) mixed with and including liquid water proofing compound as per manufacturers instructions and finishing plastered surfaces even and smooth without using extra cement complete all as specified and as directed. NOTE :- Rate for WPC deemed to be included.

Material and labour for preparation of new surfaces (plastered or un-plastered) of walls and applying two coats of cement base paint over a coat of primer omplete all as specified and as directed.

Material and labour for preparation of old decorated plastered or unplastered surfaces of wall, cornices etc by brooming down or steel wire brushing, scrapping down, smoke soot, moulds, moos efflorescent and trading oil and greasy spots and applying one coat of cement based paint of approved tint complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of any description over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamal paint of approved tint complete all as specified and directed.

Dismantling of rusted/damaged mild steel sheeting of any thickness and size from iron gates of any size and welding of 1.25mm thick rolled mild steel sheet welded or shouldered to angle iron frame and applying two coats of synthetic enamel paint on new steel surfaces over a coat of red oxide primer complete all as specified and as directed by Engr in charge

Material and labour for plain,black mild steel sheeting as in gates, 1.25mm thick sheet welded or shouldered to angle iron frame complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description and applying two coats of synthetic enamel paint of approved tint on new steel surfaces over a coat of red oxide primer complete all as specified and directed by Engr in charge.

Restraining and resecuring of barbed wire including removal & refixing of concerntina coil wherever required in single/double security fencing/on security wall complete all as directed.

MANIYA CONSTRUCTION CO

Shri Sant Cosntruction

SAMBHAJI D JARANDE

MAHESH DADAJI BACHHAV

L.K.R.TIWARI CONSTRUCTION

M/S JAYCONSTRUCTION CO

M/S KISHAN CONSTRUCTION