EOR to EI and at Newly Proposed Sub Division office M-2132 (Civil) under Gokalpuri Flyover, Delhi. Sub Head- Supplying and Installation of E.I Work.

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. "Group C"

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

4 X 4 sq. mm + 2 X 4 sq. mm earth wire

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing 12 module GI box with modular plate and cover in front on surface or in recess inculding providing and fixing 4 Nos, 3 pin 5/6 A socket outlet and 1 No. 15/16 A modular socket outlet and 2 Nos 15/16 A modular switch connection etc as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

8 way, Double door

12 way, Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A, 240 V “C” curve DP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing of 10 to 12 Watt LED, 100 lumen per watt, down lighter fitting made out of aluminium housing duly powder coated, colour rendering(CRI) ≥ 70, and correlated colour temperature (CCT) of 5500 - 6500 (±300K). The luminaries should have 10KV surge protection, PF≥0.95, the total harmonic distortion≤ 10% operatable in voltage range of 120-270 V, total burning hours 50000 with LM 70/79/80 Certificates. with integrated electronic drivers and accessories complete on recess etc. complete as required.

Supplying, installation, testing and commissioning of 36 to 40 watt recessed mounted LED Luminaries of size 600 mm (Length) x 600 mm (Width) housing made with white powder coated CRCA sheet metal and polycarbonate diffuser suitable for operation on 150 to 265V single phase A.C. supply, having system efficiency not less than 100 luman per watt. and colour temperature of 6000 K, CRI >80 with driver having power factor > 0.90, THD < 20% and efficiency > 85% driver should be IC Complete, with minimum 2.5 KV surge protection, LED life with L-70 criteria shall be not less than 50000 burning hours etc. including connection with 1.5 sq. mm. PVC insulated copper conductor FRLS cable with the help of 4 nos. fastener Hook, Clutch wire and sleeve etc. complete as required.

SITC of 36 to 40 Watt LED street light fitting aluminium die cast housing IP 65 with high power LED as light source system lemen efficiency of ⦥ 100 LM/W, clour rendering (CRI)⦥ 70 and correlated colour temperature (CCT) of 5500-6500 (± 300 K). The luminaries should have 10 KV surge protection PF⦥ 0.95 the totla harmonic distorions ≤10% operatable in voltage ranges of 120-270 Volt total burning hours 50000 with LM 70/79/80 certificates. The driver used must be a constant current driver with efficiency of ⦥ 80% and driving current ≤ 725 MA complete with suitable fasteners as required and as per direction of Engineer-in-charge i/c connection, testing etc as reqd.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

S.I.T.C of 10 to 12 Watt LED bulkhead cast aluminium heavey power coated surface mounted fitting i/c connection with 1.5 Sq.mm PVC insulated copper conductor wire i/c testing connection and commissioning etc as reqd.

Supplying and fixing 300 mm 900 RPM heavy duty Exhaust fan suitable for operation on 230 Volt ± 10%, 50 Hz supply to fixed on wall i/c connection with 1.5 Sq.mm PVC insulated PVC sheathed copper conductor single core cable i/c testing etc as reqd.

Supplying, Installation, Testing and Commissioning on wall/ceiling of 18 to 20 Watt 1200 mm long high efficiency LED liner batten luminaries having extruded aluminium housing and HET diffuser within built APFC driver having efficiency of driver 85% power factor >0.95, THD <10% with minimum 2.5 KV surge protection etc suitable for operation on 150 to 265 V single phase AC supply, having system efficacy 100 luman per watt and colour temperature of 5500 to 6500 K, CRI>80 including connection with 1.5 Sq.mm PVC insulated copper conductor FRLS cable with the help of two Clamp sleeve complete etc as reqd.

Supplying, Installation testing & Commissioning LED flood light fitting luminaries of rating 40 Watt made with high pressure die cast aluminium housing with white powder coated and polycarbonate diffuser suitable for operation on 150 to 265 Volt single phase AC supply, having system efficacy not less than 100 luman per watt and colour temperature of 5700 K CRI >70 with driver having power factor > 0.95, THD<20% and efficiency > 85% ported drive should be IC complete with minimum 2.5 KV surge protection, LED life shall be not less than 50000 burning hours IP 66 complete etc including connection with 1.5 Sq.mm PVC insulated copper conductor FRLS cable complete as required.

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Supplying and laying of following PVC insulated and PVC sheathed / XLPE armounrd Aluminum Conductor power cable of 1.1 KV grade on wall surface as reqd. (Clamped with 1 mm thick saddle) a). 3 x 10 Sq.mm armounrd Aluminum Conductor power cable

In Loose & Connection./Open duct

In pipe as reqd.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 3 X 10 sq. mm (22mm)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

Supplying installation, testing, erection & commissioning of outdoor floor mounted cubical compartmentalized type Panel depth not less than 300 mm, fabricated with 2 mm thick CRCA sheet suitable for 415/ 500 volts 50 Hz A.C. supply with CRCA sheet on bottom for taking load of cable gland necessary individual gland plates for cable gland, cable alley, locking arrangements as per direction of engineer in charg complete with bus bar chamber having 200 Amp TPN Al busbar duly sleeved and Numbering, i/c supplying and fixing the following mounting inside the panel - interconnections with suitable size Al. bus bar/copper cable for suitable size for following outgoing and incoming MCCB’s, earthing studs, powder coating/ stove enamelled painting after 7 tank treatment process, with following accessories as reqd of size. Incoming Multifunction meter with suitable CTs - 1 nos RYB LED indicator with suitable single pole MCB- 1 Set 125 Amp 4 Pole 18 KA MCCB With thermal magnetic Release along with suitable spreader link , suitable rotary handle - 1 Nos. Make-L&T (d sine MTX1.0) Equivalent Legrand/Schneider/Seimens Outgoing DP MCB 32 Amp - 4 nos DP MCB 40 Amp - 4 nos DP MCB 63 Amp - 4 nos

DRP Air Conditioning Work

A K Electric Works

Shree Krishna Enterprises

Decent Care Solutions

SONA ENGINEERS

Ele Mec Engineering Co.