REPAIR TO BDY WALL, FENCING AND CERTAIN MISC B/R WORKS IN THE AREA OF AGE B/R-IV OF GE (SOUTH) MEERUT CANTT

Amount

Taking down of cement plaster of any description from brick or stone wall etc including racking outof joints hacking for key scrubbing down with water etc complete all as specified and directed.

M & L rendering 15 mm thick on fair faces of brick or concete surfaces in CM (1:4) surface finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m depth in soft/ loose soil for foundation etc or for shaft, wells, manholes,pier holes etc n exc 10 Sqm on plan and not exc 1.5 m in depth and getting out and levelling of bottom surface to required level complete all as specified and directed.

M&L hardcore of broken stone or boulders of guage not exc. 63 mm, deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M& L for providing Cement concrete 1:4:8 Type D 2 (using 40 mm graded crushed stone aggregates) ,in foundations, filling and mass concrete complete all as specified and directed.

M&L for providing Cement concrete 1:3:6 Type C 2 (using 40 mm graded crushed stone aggregates) in suface channels and drains including necessary form work, stops, moulds etc complete all as specified and directed.

M&L for Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete using extra cement, including forms,moulds, mitred/stopped ends etc complete all as specified and directed.

Demolition brick work built in cement mortar including all quoins arches pillars etc complete all as specified and directed.

Material and labour for brick work with fly ash old size bricks of straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4 complete all as specified & directed.

All as per item No 10.00 here-in-before but except bricks complete all as specified and directed.

M&L for providing cement concrete 1:2:4 Type B 1 (using 20 mm graded crushed stone aggregates) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs hold fast water troughs, filling in pressed steel door frame and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surface of wall etc and applying two coats of Cement base paint in any colour complete all as specified and directed.

Returning ,filling in including spreading ,levelling watering and well ramming of soft/loose soil in layers n exc 25 cm thick each complete all as specified and directed.

Removing excavated material ( spoil ) not exceeding 50 m distance and depositing where directed at a level n exc 1.5 metre above the starting point complete all as specified and directed.

Demolition cement concrete in ground floor and paving not exceeding 15 cm thickness (below of above ground level) un-reinforced as in PCC benching PCC bed etc complete all as specified and directed.

M&L for Precast cement conc 1:2:4 type B-1 (20mm graded stone agg) as in manhole/drain covers slabs set in cement mortar 1:4 including necessary form work, Demolition PCC and placing to desired distance complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe- 415, Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base of flooring complete all as specified. including demolition of old PCC complete all as specified and directed.

M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors With Grey Cement and pigment laid over including 15mm thick screed bed in cement mortar 1:6 including dismantling of old inserviceable floor tiles complete all as specified and directed.

M&L in repair for laying 60 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 25mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed.

Material & labour for 40mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in flooring, surface finished even and smooth by using extra cement including demolition of old PCC complete all as specified and directed .

Supply only 3mm thick and 38 mm wide glass strips as in floor complete all as specified and directed .

Dismantling of AC/Fibre corrugated sheet any description as in roof covering incl ridge and removing from site complete all as specified and directed.

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified & directed and as per manufacturer's instructions. Note:- Height of building under which the subject item is to be executed is up to 12 mtr.

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including notching, drilling, fittings, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing conf to Fe-410-w (Gde-E -250) quality A complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling chain link fencing wiremess of any type complete all as specified and directed.

Dismantling posts and struts (wood, steel or RCC) any section, including taking out embeded portion and making good disturb ground complete all as specified and directed.

S&F Mild steel angle iron post as in fencing posts, cut to length, drilling holes, welding and embedded in concrete complete, including preparation of new or previously untreated steel & iron surfaces of any description, not otherwise described over 10 cm width or girth and apply two coat of synthetic enamel paint over over a coat of red oxide primer complete all as specified and directed.

M&L PCC in foundations, filling and mass-concrete type B2 (1:2:4) (using 40 mm graded crushed stone aggregate) complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts, etc. incl provision of binding wire complete all as specified and directed.

Supply only chain link fencing of 3.10 mm dia wire made upto into matresses complete all as specified and directed.

S&F 40x5 mm thick flat iron as in fastening of chain link fencing fixed to nuts and bolts including holes complete all as specified and directed.

S&F mild steel screw, nut & bolts including washers (machine made) with hexagonal or square heads at one end and screwed complete all as specified and directed.

S&F Mild Steel flat, round or square bar for straining, in available length, cut to length, bent to shape requqired Fe-410W (Gde E-250) quality 'A' complete all as specified and directed.

S & F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. Note : Each line wie to be measured

Tayal Builders

jitendra AND Co

NK CONSTRUCTION

AR Enterprises

AEGIS INTERNATIONAL

Anand constructions

M/S AGARWAL CONSTRUCTION CO.

SHAKTI CONSTRUCTION CO