REPAIR/MAINTENANCE AND REPLACEMENTS OF LT UG CABLE,LT FEEDER LILER,STREET LIGHT,LT POLES,DI,GI,PPR PIPE LINES,WATER /SEWAGE PUMP AND ITS CONNECTED ITEMS OF DGBR AND PERIODICAL MAINTENANCE , REPAIRS AND SERVICING OF MT VEHICLES UNDER GE (WEST) DELHI C

Amount

M&L for cleaning of under & over ground RCC water sump of cap 30,000 gallon thoroughly by scrapping/removing setteled silt on the wall and bottom surface washing with clean water after removing silt algess etc including colour wash as per existing colour on outer surface of the sump complete all as speciifed and directed.

M & L for Detecting leakage of water supply pipe lines of Galvanised iron of size 150 mm bore from any location, any depth and repairing by providing jointing material,"D" joints, union, clamps, nuts, washers & bolts and including any GI fittings etc. complete all as directed and specified including earth work etc.

All as per Srl item No.2 here -in - before but 100 mm bore

All as per Srl item No.2 here -in - before but 80 mm bore

All as per Srl item No.2 here -in - before but 40/ 50 mm bore

All as per Srl item No.2 here -in - before but 20/ 25 mm bore

S/F in replacement Sluice valve , CI, 150 mm dia ,PN - 1.6 type, complete with spindle ,etc. flanged type, ISI marked complete all as specified and directed.

S/F in replacement Sluice valve , CI, 100 mm dia ,PN - 1.6 type, complete with spindle ,etc. flanged type, ISI marked complete all as specified and directed.

S/F in replacement non return valve CI, 100mm dia PN-1 type flanged complete set ISI marked complete all as specified and directed.

M&L for dewatering, desludging and cleaning of wet and dry sewage sump well at HQ DGBR/CVD/Sainik Aram Grah up to bottom of sump by suction sweeper cum jetting machine method or any available machines as required and Taking out sludge from the sump and dump it to the suitable place away from the any sump complete all as specified and directed.

M&L for taking down of burnt motor winding of induction motor and complete rewinding of electric motor 10 HP capacity with appropriate size of enamelled copper winding wire as recommended by manufacturer including insulation varnish and paper all as directed by engr-in charge and testing complete.

M&L in repair for taking down of burnt winding of induction motor and complete rewinding of electric motor 12.5 HP capacity with appropriate size of enamelled copper winding wire as recommended by manufacturer including insulation varnish and paper all as directed by engr-in charge and testing complete.

M&L in repair for disconnecting and taking down of impeller of Non clog 12.5 HP centrifugal sewage pump and replace the existing impellar as recommended by manufacturer all as specified.

M&L for taking down of burnt winding of induction motor and complete rewinding of electric motor 5 HP capacity with appropriate size of enamelled copper winding wire as recommended by manufacturer including insulation varnish and paper all as directed by engr-in charge and testing complete.

S&F in repair fully automatic star delta starter suitable for motor of capacity 12.5 HP/10HP including contactors and wiring with suitable size of copper wire.complete all as specified and directed.

M & L in repair for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dai and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) including testing ion completion all as directed .

Supply and fixing LED street light fitting 90 Watt 230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant Complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fix in repair LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. complete all as specified and directed.

M&L in repair for preparation of old painted steel surface of LT pole /strut along with nut ,bolts etc and appling one coat of red oxide and two coat of aluminiam paint including writing pole number with black synthetic enammeled paint and making alternative strip of black ,white and yellow paint from coping of pole at height of 0.50 mtr complete all as directed by engr-in-charge.

M&L in repair copper cable flexible pvc armoured 3 core PVC insulated of size 2.5sqmm as specified and directed by Engr-in-Charge.

S&F in repair BUS BAR cable juction box/cable distribution box with door made out of CRCA sheet not less than 1.6 mm thick with 200 Amp rated aluminium 3 phase bus bar including connecting all cable with thimble on bus rail including nut and bolt and all required accessories complete all as specified and directed by engr-in-charge .

M&L in replacemment Supplying,laying and testing complete 3 layer PP-R (Polypropylene Random Copolymer) concealed pipes conforming to IS:15801 SDR 7.4 (PN-16) UV stabilised and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random including all fittings are (PN-25) such as elbow,tees,bends,shaddles of size 63mm OD laid in trenches or fixed on wall with clamps all as specified on site inclding taking down and disconnection from existing PVC or GI mains pipe line complete all as specified and directed. Make : SFMC,Supreme,KPT

M&L in replacemment Supplying,laying and testing complete 3 layer PP-R (Polypropylene Random Copolymer) concealed pipes conforming to IS:15801 SDR 7.4 (PN-16) UV stabilised and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random including all fittings are (PN-25) such as elbow,tees,bends,shaddles of size 50 mm OD laid in trenches or fixed on wall with clamps all as specified on site inclding taking down and disconnection from existing PVC or GI mains pipe line complete all as specified and directed. Make : SFMC,Supreme,KPT

M&L in replacemment Supplying,laying and testing complete 3 layer PP-R (Polypropylene Random Copolymer) concealed pipes conforming to IS:15801 SDR 7.4 (PN-16) UV stabilised and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random including all fittings are (PN-25) such as elbow,tees,bends,shaddles of size 25 mm OD laid in trenches or fixed on wall with clamps all as specified on site inclding taking down and disconnection from existing PVC or GI mains pipe line complete all as specified and directed. Make : SFMC,Supreme,KPT

M&L in replacemment PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and directed for following sizes:-

25 mm dia bore

50 mm dia bore

63 mm dia bore

M&L in replacemment PP-R FLOOT valves (brass insert) as per requirement of the site complete all as specified and directed for following sizes:-

25 mm dia bore

40 mm dia bore

63 mm dia bore

Material and labour in repair for gun metal gate valve of size 25mm with iron wheel head screwed both ends for GI pipe and fixed, bore of pipe including taking out old UNSV gate valve complete all as specified and directed by Engineer-in-Charge.

Material and labour in repair for gun metal gate valve of size 50 mm with iron wheel head screwed both ends for GI pipe and fixed, bore of pipe including taking out old UNSV gate valve complete all as specified and directed by Engineer-in-Charge.

M & L servicing of feeder pillar box, after disconnecting the incoming and outgoing connections from MCCB/ Bus bar and replacing the old burnt/ overheated unserviceable lugs, terminals, nuts, bolts, washers supporting insulators etc and checking the serviceability of MCB / MCCB, earth continuity conductor and strip etc complete all as specified, including painting of the feeder pillar.Complete all as specified and directed.

Dehydration/filtration of transformer oil by means centrifuging machine electrically operated at site of installation of transformer in running condition including testing of transformer oil before and after filtration by means of oil testing machine, keeping the electrodes at 2.5 mm gap and to achieve die electric strength of filtered oil 50 KV and above complete all as specified and directed.

Supply and topping up/replaced transformer oil conforming to IS : 335 and withstand dielectric strength of 60 KV (when tested with 2.5 Gap electrode) complete all as specified and directed.

Supply and install in repair MCCB 4 pole suitable AC 415 volt Adjustabble type , 250 Amp, 36 KA rupturing capacity, with thermal magnetic release fixed on existing LT panel all as specified and directed .

Supply and install in repair MCCB 4 pole suitable AC 3 phase 415 volt Adjustabble type , 200 Amp, 36 KA rupturing capacity, with thermal magnetic release fixed on existing LT panel all as specified and directed .

Supply and install in repair MCCB 4 pole suitable AC 3 phase 415 volt Adjustabble type , 160 Amp, 36 KA rupturing capacity, with thermal magnetic release fixed on existing LT panel all as specified and directed.

Supply and install in repair MCCB 4 pole suitable AC 3 phase 415 volt Adjustabble type , 125 Amp, 16 KA rupturing capacity, with thermal magnetic release fixed on existing LT panel all as specified and directed.

Supply and install in repair MCCB 4 pole suitable AC 3 phase 415 volt Adjustabble type , 100 Amp, 16 KA rupturing capacity, with thermal magnetic release fixed on existing LT panel all as specified and directed.

Supplying, laying, jointing, testing and commissioning LT, XLPE insulated armoured, heavy duty aluminium conductor electric cable 1100 Volts grade, cross sectional area 185 Sqmm, 3.5 core including taking out old existing cable in trench/wall/pipes/surface as required and making cannection in LT Panels/Feeder etc complete all as specified and directed.

All as per Ser item No-10 but 3.5 core 50 sqmm connections complete all as specified and directed.

All as per Ser item No-10 but 3.5 core 25 sqmm connections complete all as specified and directed.

All as per Ser item No-10 but 3.5 core 16 sqmm connections complete all as specified and directed.

Supply and fix in repair for on load changeover with advance neutral 315/320 Amp AC 415V,50Hz,4P as per sample complete all as specified and directed.

Supply and fix in repair for on load changeover with advance neutral 400 Amp AC 415V,50Hz,4P as per sample complete all as specified and directed.

Supply and fix in repair for on load changeover with advance neutral 640 Amp AC 415V,50Hz,4P as per sample complete all as specified and directed.

Supply and fix in repair time switches astro type analog (Having longitude and latitude of Indian cities in memory) 250 V, single phase of 16 Amps rating with contactor fitted inside steel enclosure complete.

Supply and fix in repair of 3 Pole power Contactor AC3 type having 18 Amps rating with click fit DIN construction complete all as specified and directed.complete all as specified and directed

M & L for Locating electrical faults and repair work in underground LT cable of size 16 to 240 Sqmm whenever any fault arises at Salaria officers Enclave area, making complete supply system functional dully rectifying and repair work complete all as specified and directed. Note: (a) Whenever any breakdown reported the Contractor will have to take immeadiate action and send skilled Technecian/Tools immediately on site. (b) Any parts required to be replaced during repair work shall be measured and paid for separately.

Supply and fix in replacement junction box made from SMC/FRP sheet ready made of size having 100 A capacity for RYB and neutral with aluminium bus bar including all necessary insulators,nut bolts, screw fix to street light pole,joint the incoming and outgoing cable with suitable no of aluminium lugs fixed to Pole /Wall with the help of suitable nuts and bolts. Complete all as specified and directed.

M&L for repair of water level indicator mechanical type having indicators making an every steps indicating 100 galon of an gap made out of angle iron 40x40x6mm and 16SWG steel wire rope ,pully ,and float as per existing size and length including complete water lavel indicator painting all as specified and directed .

M & L for painting Sewage pump installation bldg (inside and outside ) at HQ DGBR & CVD LINE with two coat of distemper paint after scrapping out old paints from wall/ceilings etc and prepare smooth surface with white putty complete all as specified and directed.

M & L for painting of pump house bldg (inside and outside ) at HQ DGBR with two coat of distemper paint after scrapping out old paints from wall/ceilings etc and prepare smooth surface with white putty complete all as specified and directed.

M & L in repair ACB 1000 Amps Microprocessor release 4 pole 50 KA maunal drawout type adjustable, over load release, CTs, Load manager complete for incoming of the LT panel ,including taking down old ACB from the panel after disconnecting all cable connections complete all as specified and directed.

M & L in repair ACB 800 Amps Microprocessor release 4 pole 50 KA maunal drawout type adjustable, over load release, CTs, Load manager complete for incoming of the LT panel ,including taking down old ACB from the panel after disconnecting all cable connections complete all as specified and directed.

S & F in repair Digital Ammeter 0-500 Amp suitable for three phase to fix in existing LT panel complete all as per direction of Engr-in-Charge.

S & F in repair Digital Volt Meter 0-500 Volts suitable for three phase to fix in existing LT panel complete all as per direction of Engr-in-Charge.

S & F in repair LED indicator lamp of different colours (red, green ,yellow ,white etc) suitable to fix in existing LT panel complete all as per direction of Engr-in-Charge.

M&L in repair GI pipe 25 mm bore medium grade including all fittings such as tees,bends,elbows,sockets ,union ,reducer any type as reqd at site and nipples fixed to wall by means of clamps and other accessories incl of taking down of old U/S pipe.

M&L in repair GI pipe 50 mm bore medium grade including all fittings such as tees,bends,elbows,sockets ,union ,reducer any type as reqd at site and nipples fixed to wall by means of clamps and other accessories incl of taking down of old U/S pipe.

M & L for collecting sample of water from HQ DGBR under & over ground RCC water sump for Chemical analysis of water by approved govt laboratory and test report should be submitted to Engr -in Charge all as specified.

M & L for Cutting wild grass, bushes, creaper, unwanted vegetation from inside/ surrounding of E/M installations, near sweage pump installations as when directed and removing of unwanted material from installation compound and depositing where directed.

Supply only stable Bleaching powder granules/high strength Calcium hypochlorite, dry free flowing and free from lumps,should not induce substances beyond acceptable limit as given in IS 10500 (2012) in treated and disinfected water,shoul be packing in drums 40-45 Kg, available chlorine % by mass Min 65,water insoluble matter max % 6,calcium Hydroxide max % 4,sodium chloride max % 15 complete all as specified and directed.

Supply only of AquaPro Digital water tester (model AP-1) , TDS meter, Make: HM Digitals and equivalent.

Supply only of Digital type PH meter water tester (model AP-1) , TDS meter, Make: Vantakool Digital PH meter ,Rozway digital PH meter and equivalent.

Taking down old U/S LT panel after disconnecting all coneection complete all as specified and directed.

S&F in repair factory made outdoor type dust and vermin proof LT Distribution/Feeder Panel board cubical double door hinged type compartmentlised of suitable size 415 volts, AC 50 Hz fabricated of CRCA sheet 2.0 mm thick machine pressed and angle iron frame 50 mm x 50mm x6mm grouted in PCC 1:2:4 type B1 (20mm graded stone aggregated) powder coated inside and outside complete including 4 pole MCCB of capacity 250 Amps enclosed in chamber and connection from incoming and outgoing electric cable with suitable size thimbles/lugs/cable glands with openable shutters on both side Note :- This item includes earth work, PCC, brickwork, plastering etc for foundation of LT Panel)

Supply only chlorine testing kit complete as per sample.

M&L for excavation in trenches in Hard and dende soil n.exc 1.5 Mtr wide and n.exc 1.5 meter in depth for laying of cables/pole etc setting out trimming the site forming bottom surface to required level complete all as specified and directed by Engr-in-Charge.

M&L for returning filling in-trenches including spreading leveling watering and well ramming in layers with soft/loose/dense soil n.exc 25 cm thick in each layer of soil complete all as specified and directed by Engr-in-Charge.

M&L for removing/excavated soil to a distance n.exc 50 Mtr and depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and as directed by Engr-in-Charge.

M&L for sand cushioning with a layer of sand Jamuna 18 cm thick (8 cm under and 15 cm above the cable) in trenches complete all as specified and as directed by Engr-in-Charge

Supply and laying un-reinforced precast concrete cable covers for cable protection of class LV type 1 flat of size 250 x150 x 40 mm.

Repair/maint of vehicles- Tata 207/Tata Xenon/Tata Yodha , once in a month for 11 Months by cleaning the vehicle from outside with the help of soap/shampoo /car washing detergent completely by removing dust and dirt from under side of the vehicle, checking of lubricants oil ,water, brake oil and other acessories fluid and top up it if required. Cleaning the vehicle from inside with the help of suction pump removing dirt and dust from complete unit, cleaning of dash board with the help of suitable mild cleaning agent of car . Cleaning of radiator of vehicle, checking its efficiency and proper functionng, checking of brake of the vehicle and do minor repair if required.Do suitable oiling and greasing. Checking allingnment of the wheels functioning of wiper, indicators ,back light ,head lights, and all electrical work like wiring and testing of all lights and bulbs complete all as specified and directed .

ditto- as above item No 79.00 but for Tata 709, Eicher 10.70/10.75 including Eicher with Hydraulic Telescopic ladder complete all as specified and as directed

ditto- as above item No 79.00 but for Maruti Omini , Maruti Swift Dzire, Maruti Ertiga complete all as specified and as directed

ditto- as above item No 79.00 but for Motor Cycle Hero / Bajaj Platina complete all as specified and as directed

Servicing and Repair/Maintenance of Vehicles- Tata 207,Tata Xenon & Tata Yodha each two times at interval of five months comprising checking and repair/replacement of unserviceable spares of engine ,self starter , gear box FIP(Fuel Injector Pump), shaft,shocker and suspension system ,braking system inlcuding brake shoe ,Radiator cleaning, replacement of all type of filters and greasing of all wheels, Wheel alignment and wheel balancing by computerized Machine including tyre rotation etc of Vehicles including dismantling / Replacing of defective parts with new parts at workshop complete all as specified and directed Note :-1. Spare parts shall be measured and paid separatly under relevant items here in after but fixing of the same deemed to be included in unit rate. 2.Cost of Engine Oil included in quoted Rate. 3 Brake oil, gear oil and coolant shall be measured and paid separatley . 4 Servicing of vehicle shall be carried out at authorised workshop only. 5.Other minor consumable items like nut bolts washer , cotton waste etc are deemed to be included in the quoted rate

Air filter ,Oil filter and Fuel filter each set of three Make - Micro ,bosh

Brake oil

Steering/gear oil

Coolant

Clutch and pressure plate set including clutch bearing and clutch cylinder,Clutch Paddle complete. Make - Tata or equivalent.

Head light assembly complete with Bulb and connection complete . Make - Autopal, Helonix,Lumax

Head light bulb Haelogen 12 volt 60 watt Make - Autopal,Helonix

Fog lamp

Brake/ Back light Assy. Make - Tata

Indicator Assy. Make - Tata

Wiper Assy with blade complete. Make -Syndicate,Champion etc

Water pump assembly

Door Lock assembly. Make -Minda.

Coolant bottle with pipe

Hose pipe set with clamp

Wheel Arch Guard cover front and rear as per existing model of Tata 207 DI including clip and bolts

Mud pad of best quality

Side looking mirror of side doors of best quality

Fan belt. Make -Fenner

M & L for rewinding of self starter of Vehicles with super enamelled insulating copper wire of existing gauge, insulating materials including assembling and testing complete all as specified and directed by Opening and dismantling of self starter, and replacing with following items. (a) Carbon brushes -01 Set (b) Solenoid Switch -01 No (c) bendix -01 No (d) Fly wheel -01 No (as per sample).

M & L for repair of alternator including repair/replacement of rectifier assembly and repair/replacement of rotor assembly complete all as specified and as directed

M & L for repair of suspension system by Dismantling front wheel and wheel joint upper and Lower of suspension system, leaf springs, reassembling and testing after repair including replacement of following items:- (a) Suspension Kit -01 Kit (b) Lower arm bush -08 Nos. (c) Upper arm bush -04 Nos. (d) Wheel joint upper -02 Nos. (e) Wheel joint lower -02 Nos. (f) Coil spring pad -02 Nos. (g) Tie rod end -04 Nos. (h) Upper arm bolt -02 Nos. (j) Kamani bush front -01 No. (k) Penion bearing -02 Nos. (l) Penion -01 No. (m) UJ Cross -01 No. testing complete all as specified and directed

Repair of Wheels and braking system including servicing and testing of master and slave cylinder by Dismantling front and rear wheels, greasing, brake work including replacing the following items:- (a) Brake pad front wheel -04 Nos. (b) Rear wheel brake shoes -08 Nos. (c) Wheel bearing inner -02 Nos. (d) Wheel bearing outer -02 Nos. (e) Wheel cylinder kit -01 No. (f) Brake plate assly -01 No. (g) Brake pad assembly -04 Nos.(h) Brake lining-01 No

Master cylinder complete with booster assembly

Repair of fuel pump by overhauling and testing on testing bench including lathe works etc reassembling after repair and replacing with following items:- (a) Valve lifter -01 No (b) Spring -01 No and other items as required

Repair/replacement of Fuel injector (Nozzel set) complete all as specified and directed.

Taking down of radiator complete assembly and repair of radiator including welding/brazing works and replacement of gaskets and seal other items as required all as specified

Opening power stearing assembly, removing stearing rack, lathe work, facing, ramming including replacing the following items:- (a) Centre pin bush -02 Nos. (b) Centre bearing assly -01 No. (c) Link rod repair kit, (d) Check nut -02 No. (e) Lower stearing oil -01 Ltr.

Denting and Painting of Vehicle part or full body in work shop including replacement of rusted M S sheet by using gas welding,applying two coat of synthetic enamelled paint over one coat of base primer and matching with existing surface complete all as specified and directed

Only painting including painting of all army sign and marking and vehicle BA No. on Number plate.

Denting and welding of broken parts complete all as directed by the Engr-in-Charge

Replacement of rusted/ damaged seat cover complete set including repair of Damaged seats and stitching work complete all as specified and directed

Supply and fixing of foot mat for Vehicle-Tata 207,Tata Xenon,Tata Yodha complete all as specified and directed

Floor matting best quality

Replacement of door gola rubber set incl door rubber set complete all as specified and directed.

Repair of Door glass channel with Door weeding set of all doors for vehicle complete all as specified and directed.

Supply and fixing of Horn assembly complete including wiring connection and fixing

Repair to gear box including bush repair/replacement and greasing etc. Complete.

Repair to tank leakage if any for the fuel tank including cleaning of tank and replacement of u/S float valve assembly and fuel tank lock and key.

Repair of puncture of tube inner

Engine oil 15 W 140

Thermostat valve

Door handle

Alternator

Servicing and Repair/Maintenance of Vehicles- Eicher 10.70/10.75, Tata 709 each two times at interval of five months comprising checking and repair/replacement of unserviceable spares of engine ,self starter , gear box FIP (Fuel Injector Pump), shaft,shocker and suspension system ,braking system inlcuding brake shoe ,Radiator cleaning, replacement of all type of filters and greasing of all wheels, Wheel alignment and wheel balancing by computerized Machine including tyre rotation etc of Vehicles including dismantling / Replacing of defective parts with new parts at workshop complete all as specified and directed. Note :-1. Spare parts shall be measured and paid separatly under relevant items here in after but fixing of the same deemed to be included in unit rate. 2.Engine Oil will be supplied free of cost by the department but topping and refiling will be done by the contractor. 3 Brake oil, gear oil and coolant shall be measured and paid separatley . 4 Servicing of vehicle shall be carried out at authorised workshop only. 5.Other minor consumable items like nut bolts washer , cotton waste etc are deemed to be included in the quoted rate

Air filter ,Oil filter and Fuel filter each set of three Make - Micro, bosh

Brake oil

Gear oil

Coolant

Clutch and pressure plate set, including clutch cylinder, Clutch bearing complete. Make - Eicher or eqlt

Head light assembly complete with Bulb and connection complete . Make - Autopal, Helonix,Lumax

Head light bulb Haleogen 12 volt 60 watt Make - Autopal, Haelonix

Break/ Back light Assy. Make - Autopal, Halonix

Indicator Assy. Make - Autopal, Halonix

Wiper Assy with blade complete make - Syndicate, Champion etc

Repair to Door /Window glass with replacement of rubber beeding and door glass channel complete.

Door Lock assembly Make -Minda

Water pump assembly

Side looking mirror of side doors of best quality

Mud pad of best quality

Coolant bottle with pipe

Fan belt. Make -Fenner

Hose pipe set

Denting and Painting of Vehicle part or full body in work shop including replacement of rusted M S sheet by using gas welding, applying two coat of synthetic enamelled paint over one coat of base primer and matching with existing surface complete all as specified and directed

Only painting including painting of all army sign and marking and vehicle BA No. on Number plate.

Denting & cutting of rusted cabin body and dala floor incl welding of broken parts with new MS sheet of suitable size complete floor of eicher & Tata 709 rear body complete all as specified.

Replacement of rusted/ damaged seat/seat cover complete all as specified and directed

Supply and fixing of foot mat

M & L for rewinding of self starter of Vehicles with super enamelled insulating copper wire of existing gauge , insulating materials including assembling and testing complete all as specified and directed by Opening and dismantling of self starter, and replacing with following items. (a) Carbon brushes -01 Set (b) Solenoid Switch -01 No (c) bendix -01 No (d) Fly wheel -01 No (as per sample).

M & L for repair of alternator including repair/replacement of rectifier assembly and repair/replacement of rotor assembly complete all as specified and as directed

M&L for repair of suspension system by Dismantling front wheel and wheel joint upper and Lower of suspension system, leaf springs, reassembling and testing after repair including replacement of following items:- (a) Suspension Kit -01 Kit, (b) Lower arm bush -08 Nos. (c) Upper arm bush -04 Nos. (d) Wheel joint upper -02 Nos. (e) Wheel joint lower -02 Nos. (f) Coil spring pad -02 Nos. (g) Tie rod end -04 Nos. (h) Upper arm bolt -02 Nos. (j) Kamani bush front -01 No. (k) Penion bearing -02 Nos. (l) Penion -01 No. (m) UJ Cross -01 No. testing complete all as specified and directed

Repair of Wheels and braking system including servicing and testing of master and slave cylinder by Dismantling front and rear wheels, Hub greasing, brake work including replacing the following items:- (a) Brake pad front wheel -04 Nos. (b) Rear wheel brake shoes -08 Nos. (c) Wheel bearing inner -02 Nos. (d) Wheel bearing outer -02 Nos. (e) Wheel cylinder kit -01 No. (f) Brake pad assembly -04 Nos. (h) Brake lining-01 No

Master cylinder complete

Repair of fuel pump and testing on testing bench reassembling after repair and replacing with following items:- (a) Valve lifter -01 No (b) Spring -01 No and other items as required

Opening stearing assembly, removing stearing rack, lathe work, facing, ramming including replacing the following items:- (a) Centre pin bush -02 Nos. (b) Centre bearing assly -01 No. (c) Link rod repair kit, (d) Check nut -02 No. (e) Lower stearing oil -01 Ltr.

Supply and fixing of PVC multistranded copper single core cable 25 sqmm required for Battery

Repair of puncture of tube inner complete all as specified and directed

Repair to gear box including bush repair/repalcement and greasing etc. Complete.

Repair to tank leakage if any for the fuel tank including cleaning of tank and replacement of u/S float valve assembly and fuel tank lock and key.

Supply and fixing of brass battery terminal complete

Servicing and Repair/Maintenance of Vehicles - Maruti Ertiga/Maruti Omini/ Maruti Swift Dzire each two times at interval of five months comprising checking and repair/replacement of unserviceable spares of engine ,self starter , gear box FIP (Fuel Injector Pump), shaft,shocker and suspension system ,braking system inlcuding brake shoe ,Radiator cleaning, replacement of all type of filters and greasing of all wheels, Wheel alignment and wheel balancing by computerized Machine including tyre rotation etc of Vehicles including dismantling / Replacing of defective parts with new parts at workshop complete all as specified and directed by Engr in charge Note :-1. Spare parts shall be measured and paid separatly under relevant items here in after but fixing of the same deemed to be included in unit rate. 2. Engine oil (5W40)suitable for veh consuming 87MT gas as fuel , Brake oil, gear oil ,steering oil and coolant shall be measured and paid separatley . 3 Servicing of vehicle shall be carried out at authorised workshop only. 4.Other minor consumable items like nut bolts washer , cotton waste etc are deemed to be included in the quoted rate

Oil filter, Fuel Filter and Air filter set of three complete

Brake Oil

Engine Oil

Stearing/Gear Oil

Coolant

Fan belt

Clutch and pressure plate set including clutch bearing and clutch cylinder,Clutch Paddle complete Make -Maruti or equivalent

Head light assembly complete with Bulb and connection complete . Make - Autopal, Helonix,Lumax

Head light bulb Haelogen 12 volt 60 watt Make - Autopal,Helonix

Head light Relay

Break/ Back light Assy Make - Autopal, Halonix

Indicator Assy. Make - Autopal, Halonix

Cabin light assembly

Fog lamp assembly

Wiper Assy with blade complete make - Syndicate, Champion etc

Repair to Door /Window glass with replacement of rubber beading complete

Door Lock assembly. Make - Minda

Water pump assembly

Side looking mirror of side doors of best quality

Star Box Cover

Steering/Gear handle Cover

Parking Light Bulb

Radiator cleaning fluid bottle

Coolant bottle with pipe

Silencer packing

Cable and Lugs

Mud pad of best quality

Wheel Cover set

Hose pipe set

Dashboard Lock/Fuel Tank Lock

Tissue Paper box

Tyre Polish

Dashboard Polish

Car Freshner

Car Polish

Perfume

Hand Towels

M & L for rewinding of self starter of Vehicles with super enamelled insulating copper wire of existing gauge, insulating materials including assembling and testing complete all as specified and directed by Opening and dismantling of self starter, and replacing with following items. (a) Carbon brushes -01 Set (b) Solenoid Switch -01 No (c) bendix -01 No (d) Fly wheel -01 No (as per sample).

M & L for Servicing of air conditioning including repalcement of Cabin Air filter and charging of refrigerant including electrical works complete all as specified and as directed

M & L for repair of suspension system by Dismantling front wheel and wheel joint upper and Lower of suspension system, leaf springs , reassembling and testing after repair including replacement of following items:- (a) Suspension Kit -01 Kit, (b) Lower arm bush -08 Nos. (c) Upper arm bush -04 Nos. (d) Wheel joint upper -02 Nos. (e) Wheel joint lower -02 Nos. (f) Coil spring pad -02 Nos. (g) Tie rod end -04 Nos. (h) Upper arm bolt -02 Nos. (j) Kamani bush front -01 No. (k) Penion bearing -02 Nos. (l) Penion -01 No. (m) UJ Cross -01 No. testing complete all as specified and directed

Repair of Wheels and braking system including servicing and testing of master and slave cylinder by Dismantling front and rear wheels, greasing, brake work including replacing the following items:-(a) Brake pad front wheel -04 Nos. (b) Rear wheel brake shoes -08 Nos. (c) Wheel bearing inner -02 Nos. (d) Wheel bearing outer -02 Nos. (e) Wheel cylinder kit -01 No. (f) Brake plate assly -01 No. (g) Brake pad assembly -04 Nos.(h) Brake lining-01 No

Replacement of front shocker pressure type

Master cylinder complete

Repair/Replacement of Electric fuel pump assembly incl dismantling of old unsv complete all as specified and directed.

Opening stearing assembly, removing stearing rack, lathe work, facing, ramming including replacing the following items:- (a) Centre pin bush -02 Nos. (b) Centre bearing assly -01 No. (c) Link rod repair kit (d) Check nut -02 No. (e) Lower stearing oil -01 Ltr.

Repair to gear box including bush repair/repalcement and greasing etc. Complete.

Floor matting best quality

Supply and fixing of foot mat

Replacement of rusted/ damaged seat/seat cover complete all as specified and directed

Denting of certain places of bumper/body, removing dents, painting 2 coat of spray paint to matching existing surfaces.

Servicing and Repair/Replacement of Vehicles- Motor cycle Hero Honda & Bajaj Platina two times at interval of five months comprising checking and repair/replacement of unserviceable spares of engine, gear box, FIP(Fuel Injector Pump), suspension system ,braking system , Chain and chain cover, Kick Assembly, replacement of filters and greasing of all wheels, of Vehicles including dismantling / Replacing of defective parts with new parts at work shop complete all as specified and directed by Engr in charge Note :-1. Spare parts shall be measured and paid separatly under relevant items here in after but fixing of the same deemed to be included in unit rate. 2.Cost of Engine Oil, Brake oil, gear oil included in quoted rate. 4 Servicing of vehicle shall be carried out at authorised workshop only. 5.Other minor consumable items like nut bolts washer , cotton waste etc are deemed to be included in the quoted rate

Brake shoe

Clutch plate

Brake cable

Accelerater wire

Clutch wire

Air Filter

Head light assly

Kick Housing with bearing

Shock observer rear and front

Chain and socket

Condenser

Spark Plug. Make- Mico

Indicating assly

Speedometer assembly

Horn complete assembly

Back light assembly

Side indicator Rear & Front complete

Sprocket & Drum Assembly

Chain & Garari complete

Engine Oil

Greasing for hub, wheel baearing, bushing and nipple

Ignition Coil

Lock and key of fuel tank & luggage/dak box

Labour charge for seat repair including replacement of seat cover complete all as specified and directed parts

Supply and Fix Battery 12 Volt 10-15 AH Complete all as specified and directed

Retrading of unserviceable tyre of any size by dismantling and refixing the same for smooth running of the vehicle.

Repair and servicing of Air pressure pump including servicing of compressor complete and all connected electric works as required at site to make the pump serviceable including replacement/checking of piston pin and valves and replacement of gaskets nozzles etc all as specified and as directed.

Hose pipe for car washing pump 15 mm dia heavy duty Notes for Item Nos 79 to 243:- (a) All the old retrived material will be the department property and the same will be depsoited to MT store yard. (b) All above vehicle shall be tested by the contractor Rep and their functionality shall be ensured on daily basis before going on duty at 8:30 AM on each working day at MT yard in presence of MES Rep. (c) All defective parts shall be replaced by contractor within 48 hrs in above listed vehicle if any breakdown/offroad condition of vehicle. In case of failure on the part of contractor to do so a panel recovery of Rs. 500/- per day per vehicle shall be made from the contractor dues.

J V ENGINEERS / JAI SINGH (BID ID -3358561)

M P TYAGI ENGINEERS AND CONTRACTORS (BID ID -3357021)