ADDN/ALTN AND SPL REPAIR TO BAFFLE RANGE AT RRRC UNDER GE (CENTRAL) DELHI CANTT

Amount

Demolition of cement concrete (un-reinforced) in Ground floors and paving n.exe 15cm thickness ( below or above ground level ) including removal of rubbish out side complex (MoD land), complete all as specified and directed.

Taking down of cement plaster of any description complete all as specified and directed.

Taking up or down 15 mm dia GI tubing and connections including cleaning for re-fixing, complete all as specified and directed.

All as per item No. 3 above but 20 mm dia.

Demolition of Brick work of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.

Taking down chowkats or frames n.exc 1.5 sqm each with shutters (without taking off shutters from frames), complete all as specified and directed.

Taking down chowkats or frames exc. 1.5 Sqm and n.exc 4 Sqm each with shutters (without taking off shutters from frames ), complete all as specified and directed.

Taking down shutters of any description exc.1 Sqm and n.exc 2 Sqm complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed stoneware, Asbestos Cement or reinforced concrete) set in cement mortar, internal dia of pipe 100 mm, complete all as specified and directed.

Dismantling floor, hearth tiles incl cement mortar bedding (but not backing) removing serviceable tiles and rubbish out of premises, complete all as specified and directed.

Dismantling boarding any description (board/plywood) fixed in any position with screw, complete all as specified and directed.

Disconnecting existing water tanks, setting aside (or lowering if required) for cleaning,repairing and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes and reconnecting and refixing in position for tanks capacity exc 500 and n.exc 1000 ltr complete all as specified and directed.

M&L cement concrete 1:4:8 type D2 (40mm crushed graded stone aggregate) as in sub base 100 mm thick, complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished fair and even without using extra cement, complete all as specified and directed.

M&L for forming construction joint 75mm deepx10mm wide filled with sealing compound Grade A complete all as specified and directed.

S&F glass dividing strips, 38mm wide and 3mm thick and inserted in position to conform to design, complete all as specified and directed.

S&F 15mm dia GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors, shall be painted with bituminous paint of approved quality,The pipes should not come in contact with lime mortar or lime concrete as pipes are affected by lime etc complete all as specified and directed.

S&F in repairs PVC (SWR) pipes double socket in any length with rubber ring joints, fixed to walls 110mm dia ,in four storey building complete all as specified and directed.

All as per item No. 18 above but 75 mm bore.

S&F in repairs PVC (SWR) bends of any radius (110mm bore) including jointing with solvent cement complete all as specified and directed.

S&F in repairs PVC (SWR) junction double, (double T, 110 mm bore), equal or unequal , including jointing with solvent cement complete all as specified and directed.

All as per item No. 21 above but 75 mm bore.

S&F in repairs PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs PVC (SWR) vent cowl of 110 mm bore complete all as specified and directed.

All as per item No. 24 above but 75 mm bore.

S&F in repair pvc floor trap square type with Cockroch Proofing CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified and directed.

S&F in repair Salt Glazed Stone Ware (SGSW) gully traps square or round mouthed type size 150x150mm including excavation/earth work, bed concrete, surrounding concrete and CI grating, complete all as specified and directed.

S&F in repair brass chromium plated tubuler towel rail 20mm dia D type ISI marked 60cm long between flanges including a pair of CP brass brackets, complete all as specified and directed.

S&F in repairs bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy, chromium plated long body with flange complete all as specified and directed.

Supply and fix in repairs chromium plated brass angle valve suitable for 15mm bore pipe, complete all as specified and directed.

Supply and fix in repair chromium plated brass angle valve dual type suitable for 15mm bore pipe, complete all as specified and directed.

S&F in repair 15mm dia chromium plated wall mixer hot & cold L bend 3 IN 1 pattern fixing and connection to pipes complete all as specified and directed.

S&F in repair 15mm dia brass chromium plated mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB including taking out existing mixer from old WHB, complete all as specified and directed.

S&F in repairs CP Brass shower rose 100 mm size suitable for 15mm bore pipe complete all as specified and directed.

S&F in repair Stop Valve 20mm dia cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or unions, complete all as specified and directed.

All as per item no. 35 above but 15mm dia.

S&F in repair stop valve 15mm dia fancy type chromium plated with long shank and cap (concealed type) complete all as specified and directed.

S&F in repair health faucets with crutch or push handle, screwed down with 1.5mtr PVS flexible pipe, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy. Chromium plated long body complete all as specified and directed.

S&F CP connection pipe of 15mmx 450mm with CP check nuts with washers, complete all as specified and directed.

S&F in repair vitreous China coloured European type WC with wall mounted (single piece)including connection to drain,'S' trap and fixing bolts ,plastic water closet seat cover complete all as specified and directed. Clean Rim of size 55x350x370 mm with seat cover with matching in white colour.

S&F in repair vitreous chinaware coloured oval shape wash hand basin (WHB) size 550mm x 400mm complete, Ist quality, including provision of pair of mild steel angle iron brackets of suitable size duly painted and cutting for and pinning in ends of brackets in walls & making good & including providing and fixing of suitable waste pipe and waste fitting complete all as specified and directed.

S&F in repair vitreous china squatting pan of orrissa pattern, of size 580x440 mm , 1st quality, long pan white with "P"or "S" trap front or back inlet and integral footrest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete beddingcomplete all as specified and directed.

S&F in repair brass chromium plated toilet paper holder, complete all as specified and directed.

S&F stainless steel gratings 100mm bore size fixed with cement motar complete all as specified and directed.

S&F in repair brass chromium plated soap dish, complete all as specified and directed.

S&F in repairs brass chromium plated towel rack 600 mm size including a pair of CP brass bracket complete all as specified and directed.

M&L for brick work with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls with old size bricks, built in cement mortar 1:4, complete all as specified and directed.

M&L for brick work with sub class 'B' brick straight or curved on plan exc 6 metre mean radius with old size bricks, built in cement mortar 1:6, complete all as specified and directed.

S&F mild steel work as in hold fast 25x3mm flat iron and similar articles conforming to Fe-410-0, complete all as specified and directed.

M&L precast reinforced cement concrete 1:1.5:3 type B-1 (using 20mm graded stone aggregate) as in shelves, Manhole cover landings, cover slabs, chullah hoods, chajjas, water trough and similar articles including form works , set in cement mortar 1:4, complete all as specified and directed. (Note:- reinforcement to be measured & paid separately).

S&F fibre glass Reinforced Plastiic (FRP)door frame shall be three legged of cross section 90mmx45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness .The laminate door frame moulded with fire retardant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs.The frame shall be coverec with fibre glass from all sides . MS stay shal be provided at the bottom to steady the frame complete all as specified and directed.

S&F FRP Door shutter shall 30mm thick glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacturer . Made with retardant grade unsaturated Poyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitble blocks of seasoned wood inside at required places for fixing of fittings , cast monolithically with 5mm thick FRP panels and confirming to IS 14856-2000 complete all as specified and directed.

M&L for 2nd class hardwood plain, solid straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, complete all as specified and directed.

M&L for 2nd class hardwood plain fillets, square , rectangular or triangular in section, wrought, sectional area exc 13 Sq.cm and n.exc 25sq.cm fixed with screws complete all as specified and directed.

M&L for 35 mm thick 2nd class hard wood glazed and skelton door shutter, factory made, open rebated and prepared to receive glass/guage etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/guage etc size of member as specified in SSR Part I Section 8 clause 20(a) and fixed to chowkat, complete all as specified and directed.

S&F 35mm thick 2nd class Hard wood rail & style (factory made) plain, framed, panelled shutter (two panel) with lock rail & panel of 12mm veneered particle board with commercial veneering on both sides. The size of rail & style as per IS :1003 (Part I), Kiln seasoned & chemicals pressure treated, complete all as specified and directed.

S&F 2nd class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door(Hollock) and window stop and the like, including all necessary labour, article n.exc 200 cu cm each wrought, complete all as specified and directed.

S&F 50 mm long (size) butt hinges medium weight, cold rolled, mild steel, complete all as specified and directed.

S&F 100 mm long (size) butt hinges, stainless steel with brass/bronze hinge pin, complete all as specified and directed. Make: Kich Cat no: DH235S or equivalent.

S&F in repairs stainless steel handle of size 200mm size long complete all as specified and directed.

S&F stainless steel handle of size 200mm size long complete all as specified and directed.

S&F stainless steel handle of size 150mm size long complete all as specified and directed.

S&F stainless steel handle of size 200mm size long complete all as specified and directed.

S&F in repairs 150mm size double action spring, hinge, mild steel with steel wire spring, stove enamelled black, complete all as specified and directed.

S&F in repair 300mm long, stainless steel of AISI 316 grade, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and fixed, complete all as specified and directed.

S&F 300mm long, stainless steel of AISI 316 grade, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and fixed, complete all as specified and directed.

S&F in repairs stainless steel of AISI-316 grade barrel tower bolt 200 mm long, extruded section, complete all as specified and directed.

S&F stainless steel of AISI 316 grade barrel tower bolt 200 mm long, extruded sections complete all as specified and directed.

S&F stainless steel of AE - SI 316 grade barrel tower bolt 150 mm long , extruded sections complete all as specified and directed.

S&F in repairs stainless steel of AISI 316 grade floor door stopper with hard drawn steel spring 140mm long complete all as specified and directed.

S&F stainless steel of AISI 316 grade floor door stopper with hard drawn steel spring 140mm long complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) as in blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces, complete all as specified upto two storey height.

S&F Hasp and staple, 100mm size, safety type, aluminium anodised brass hinge pin including bolt to hinge plate & fixed with screws, complete all as specified and directed.

S&F continuous (Piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 30 mm, complete all as specified and directed.

Supply and fix 40mm dia, cup board knobs fixed with nuts, screw and washer of brass polished , complete all as specified and directed.

S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with steel wire staples, complete all as specified and directed.

S&F 4 mm thick plain sheet glass and glazing , in square n.exc 0.5 Sqm in each pane, complete all as specified and directed.

S&F mild steel 300mm ordinary rat tail, rod pattern, springs including roller and roller plate complete all as specified and directed.

M&L for 15 mm thick internal rendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 15mm thick external rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement and mixed with water proofing compound, making good by existing colouring complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid separately)

Supply only integral water proofing admixture of approved quality complete all as specified and directed.

M&L for 5 mm thick rendering in cement mortar 1:3 ceiling, surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 10 mm thick rendering in cement mortar 1:3 with WPC on concrete surfaces of chajja and like surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L form work to chajja, weather shade, troughs and similar items including edges for rough finished surfaces of concrete flat, complete all as specified and directed.

M&L form work to edges of concrete flats, treads, breaks in floors window cill, concrete railing opening in conc wall , floor, roof and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5 cm but n.exc 10 cm wide for rough finished surfaces of concrete, complete all as specified and directed.

M&L for reinforced cement concrete 1:1.5:3 type B-1, (using 20mm graded stone aggregate) (nominal mix) as in slabs supported on walls, landing, balconies, shelves and like, complete all as specified and directed. (Note:- Reinforcement & form work shall be measured & paid under respective items).

S&F MS framed work such as grills, gratings etc with ends of bars shouldered and or riveted, framed guard bars, barred iron doors, ladders, frame work of water trough, railings,cooler stand and similar work to conforming to Fe -290,Gde-E-165 ,complete all as specified upto 2 storey height.

Supply and fix TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) , not less than 0.9 mm dia conforming to Fe-410 - 0, complete all as specified and directed.

M&L for Preparation of old decorated surfaces(Plastered or unplastered) of wall including cornices, pillasters applying two coats of white lime washing, complete all as specified and directed.

M&L for Preparation of old decorated surfaces(Plastered or unplastered) of ceiling including cornices, pillasters etc and applying two coats of white lime washing, complete all as specified and directed.

Complelte removal of existing old treatment on surface from walls with machenical grinder (machine) as per specification of manufacturer of pains/OBDs, complete all as specified and directed.

M&L for a coat of alkali resistant primer over alread prepred surface of walls complete all as specified and directed. (Note:- Item is executed in stage and passed.)

M& L for preparing the entire surface with applying 2-3 mm thick wall care putty on walls surface finished even and smooth complete all as specified and directed. Putty to be procured directly from manufacture.(Note:- Item is executed in stage and passed.)

M&L for applying two coats of oil bound distemper on wall surface with roller brush complete all as specified and directed. (Note:- Item is executed in stage and passed.)

M&L for Preparation of old painted surfaces of steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for Preparation of old painted wooden surfaces of any description, over 10 cm width or girth, not otherwise described, and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for Preparation of new surfaces (Plastered or un-plastered) on ceiling and applying three coats of white lime wash, complete all as specified and directed.

M&L for Preparation of new surfaces (Plastered or un-plastered) on wall and applying three coats of white lime wash, complete all as specified and directed.

M&L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying two coats of oil bound distemper(white or tinted) over a coat of 3mm thick wall care putty on plastered surfaces, complete all as specified and directed.

M&L for Preparation of new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M&L for Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described, and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

Preparing surfaces of wood and wood based materials steel and iron work , new or old , treating small articles such as stop , covers, gully gratings , hold fasts,ends of posts, back of chowkats etc area not exceeding 0.10sqm each treated with tar or coal tar black paint complete all as specified and directed.

M&L for Preparation surface of wood or wood based materials, new or old of any description and girth and treating with two coats creosote to back of ply wood, complete all as specified and directed.

Removing excavated materials to a distance exc 1.50 Km but not exc 5 Km outside defence land and depositing where directed.

Cement concrete 1:3:6 type C-2 (40mm graded crushed stone aggregate ) as in foundation manholes complete all as specified and directed.

Cement concrete 1:2:4 type B-2 (40 mm graded crushed stone aggregate ) as in surface channels and drains complete all as specified and directed.

Cutting into existing manholes for connecting new drain, making good to pipe and rendering, cutting out existing benching and forming branch channel (half round or ¾ section) in cement concrete 1:2:4 type B-1, smooth finished and re-forming benching as required for 100mm dia pipe, complete all as specified and directed.

M&L for rectified coloured ceramic tiles 300x600 x 7 to 8mm thick, as in vertical surfaces of wall as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for rectified coloured ceramic tile 300x300x6-8 mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for polished Vitrified tile ultra charge, Darh shade 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

All as per item No. 112 above but over and including 10mm thick rendering in CM 1:4 as in skirting ditto.

M&L for chipping out spilled and loose concrete cover and derusting steel reinforement of concrete column, beam, slab, chajjas, parapets and the like as directed upto 25 to 35mm thick roughening and cleaning concrete surface with steel wire brushes, washed with water and allowed to dry including derusting steel wire reinforecement, providing fabric MS wire mesh 75 x 75 x 2mm as reinforcement to concrete surface applying adhesive/admixture over steel mesh and providing 25mm average thickness guniting mix using one part of OPC 53 grade and two part of gaggar sand mixed with adhesive/admixture @ pressure of 2.5 to 3.00kg/Sqcm by guiniting machine and surface finished even and fair including necessary padding, shuttering/scaffolding, formwork (guniting work to be carried out upto 10 metre height) complete as directed at site. Note :- (a) After placing the additional reinforecement all concrete surfaces shall be throughly scrubbed with wire brushes, washed with water and allow to dry, apply chemistic polycretes admixture @ 2.25 kg by weight of cement all as per manufacturers instruction. (b) when polymix concreting in taking condition,guiniting is done with polycrete admixture @ 2% by weight of cement all as per manufacturers instructions (polycrete admixture shall be procured from chemical adhesive their authorised dealer). (c) Cost of the above aspect shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account. (d) E2 design Approval by Chief Offfice.

M&L Cement concrete 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in roof kerbs or mud stops etc including weathering slightly rounded or chamfered edges, finished even and smooth without using extra cement including form work , complete all as specified and directed.

S&F powder coated ( 50 micron thick) aluminum frames for windows/ventilators with one or more rebates including jointing cleats for fixing etc complete all as specified and directed.

S&F powder coated ( 50 micron thick) aluminum orametal grill icludig cuttig /opeig for AC ad coolers complete all as specified and directed.

S&F powder coated ( 50 micron thick) aluminum glazed/ gauzed windows and ventilators shutters of three track channel frame of size 85 x 45 mm sliding window and ventilators aluminum section including necessary jointing cleats glazing clips rubber packing anodised aluminum beading screws including fittings such as 150mm long, 2 nos roller , 2 no tower bolt 100 mm long and 1 no aluminim handle 100 mm long etc in each shutter complete all as specified and directed.

S&F power coated ( 50 micron thick) aluminium glazed/ gauzed door shutter of three track channel frame of size 85 x 45 mm sliding of door, with four Nos, with 5.5 mm thick frosted sheet glass including four no roller ,with four brass handle fixed with brass screws and four lever locking arrangement, including sutaible chowkhatt complete all as specified and directed.

S&F powder coated ( 50 micron thick) aluminium glazed/gauzed ventilators shutters Top hung type without sash bar aluminium section weighing 0.55 kg per mtr including necessary jointing cleats glazing clips rubber packing anodised aluminium beading screws including fittings such as no peg stages 150mm long, 2 Nos aluminium hings 75mm long 2 Nos towr bolt 100mm long and 1 No aluminium hangle 100mm long etc in each shutter complete all as specified and directed.

S&F 4mm thick pin headed glass panes used in anodised aluminium glazed/gauzed windows and ventilators shutters complete all as specified and directed.

S&F Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms)

S & Fin repair 1000 ltr capacity three layer white colour rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old water tank complete all as specified and directed.

M& L in repairs Providing precast cement concrete type B-0 1:2:4 set in cement mortar 1:4 (12.5mm graded aggregate) louvres and jallies, 40 mm thick (mea sured solid), including all moulding complete all as specified and directed.

M&L 75 mm PCC(1:4:8) type D2 using 40mm graded stone aggregate as in sub base of floor and filling as mass conc complete all as specified and directed.

S&F in repairs PVC (SWR) bends of any radius ( 75mm bore) including jointing with solvent cement complete all as specified and directed.

M&L for Chequered cement concrete tiles with grey cement and no pigment 30cm x 30cm x 25mm thick, set, jointed and pointed in near cement slurry in floors including 15mm thick screed bed in floor complete all as specified and directed.

M&L for Preparation of newly plaster surfacesas on wall /ceiling and applying two coats of weather proofing exterior acrylic emulsion paint of approved make ist quality over one coat of primer of the same manufactureand surface shall be prepared with white cement wall care putty including scafolding upto height 12m complete all as specified and directed.

M&L preparation of old plastered wall surfaces and applying two coats of cement base paint with camouflage type complete all as specified and directed.

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed. (Note:- Payment for providing grooves shall be made separately).

M&L for roof treatment as per the description below:- a) Plain cement concrete average 50 mm thick 1:2:4 type B0 (using 12.5 mm graded stone aggrigate )for levelling course for providing slope in the roof @ 1:40 gradient b) Apply bituminous primer @ 0.3 ltr/Sqm (conforming to IS-3384) on prepared surfaces. After drying of primer apply a coat of hot blown 85/25 grade bitumen conforming to (IS-702 @ 1.20 kg/Sqm of prepared surfaces. c) Laying APP (Atatic Polypropylene) modified five layered membrane 3 mm thick and weighing not less than 4 Kg/Sqm with centre core 160 GSM/ Sqm ; core reinforced and laid with 75 mm side overlap and 150 mm end lap. The membrane shall be laid with LPG torch application and overlaps sealed and finished neatly as per the manufacturer specification And apply two coat of silver aluminum paint.

M&L Second class H/W Clean sawn timber scanting framed & fixed complete all as specified and directed.

M&L 25 mm Second class H/W ide and edges tongued and grooved or rebated & fixed complete all as specified and directed.

Suply only 20mm graded course aggregate for filling in wooden barrier boxes complete all as specified and directed.

Forming embakment incl raising earth spreading watering etc nexc 1.5 high complete all as specified and directed.

S&F Sifcon Panel Bullet resistant Sifcon Panels (slurry infiltrated Fibre Concrete with percentage of steel fibre not less than 8 uniformly mixed ) of 1m width and 2m length (in three parts i.e. 2m = 0.7+ 0.6+0.7m) with 3" thick shall be fixed with 6 using nos 20mm dia 350 mm long stainless steel nuts and bolts all as per TBRL Specification of Baffle Range Manual as amended up to date with Ballistics Testing at TBRL DRDO Chandigarh, Gaps between the panels shall be filled with Rich Cement Mortar of Recronfiber complete all as specified and directed. Note:- The work shall be carried out using scafolding, padding, netting complete all as directed at site. Cost of the above shall deemed to be included in the quoted rates.

Excavation in trenches, any type of soil n exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, erlls, cesspits, manholes, pier holes, etc n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.

All as per item No. 137 but exc 1.5 mtr and n exc 3.00 mtr depth complete all as specified and directed.

M&L Cement conc 1:4:8 type D-2 bed to 200 mm drain pipes incl packing under and haunching against the sides of pipe after they are late and tested for 150mm bore pipes complete all as specified and directed.

M&L Cement conc 1:4:8 type D-2 bed to 150 mm drain pipes incl packing under and haunching against the sides of pipe after they are late and tested for 150mm bore pipes complete all as specified and directed.

S&F 200mm internal dia of Reinforced concrete pipes, classs NP-2, incl testing, laid and jointed complete with collars complete all as specified and directed.

S&F 150mm internal dia of Reinforced concrete pipes, classs NP-2, incl testing, laid and jointed complete with collars complete all as specified and directed.

Returning filling in incl spreading, leveling watering and well running in layers n.exc 25 cm complete all as specified and directed.

Removing excavated soil to a distance n. exc 50 mtr and depositing were directed at a level n. exc 1.5 mtr above the starting point complete all as specified and directed.

Cutting of exising 200 mm dia manholes for connecting new drains making good to pipe and rendering cutting out exising benching for and forming benching for and forming branch channel (1/2round or 3/4 section ) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching required complete all as specified and directed.

Cutting of exising 150mm dia manholes for connecting new drains making good to pipe and rendering cutting out exising benching for and forming benching for and forming branch channel (1/2round or 3/4 section ) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching required complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (20 mm graded aggrigate) as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed.

M&L for Rendering 10mm thick on fair face on brick work or conc surfaces finished even and smooth without using extra cement in CM 1:4 complete all as specified and directed.

M&L for precast factory made manhole cover, area of each cover n.exc 0.60 Sqm, 100mm thick with SFRC concreting including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet complete all as specified and directed.

M&L for precast factory made manhole cover, area of each cover n.exc 0.20 Sqm, 50 mm thick with SFRC concreting including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet complete all as specified and directed.

M&L ready mix plaster of 15mm thick on brick or concrete surfaces including neessary cement slurry with bulk density 1.4 to 1.7 kg, water ratio 17 to 19% by weight & compressive strength as per IS-4031 Part-6 applied as per manufacture instructions and complete all as specified and directed. Note: - Contractor shall have to deposit empty bags to the store yard of Eng-In-charge before claiming any payment.

Dismantling the already existing & damaged SIFCON panels manually using crane & scaffolding & disposing off the same as per instructions of Eng-in-Charge.

Description of Work / Item(s)

Amount

Taking down carefully copper/aluminium point wiring from wooden battan/ conduits or from the wall by chasing/cutting (light, fan, socket or power) completely including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc. to be measured separately) and making good disturbed surfaces of walls, floor etc. complete all as specified and directed.

M&L point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall & including rigid PVC conduit FRLS, medium grade ,ISI marked for terminal boxes or fabricated branded modular metal flush box duly make embossed, with top cover also including porvision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly the following:-

(a) One light/fan point controlled by one by one way switch

(b) One bell point controlled by one by one way switch

(c) One 5 pin socket outlet 5 hole 5 Amp independent including PVC unsheathed copper conductor 1.5 Sqmm cable as earth wire connected to common earth and to earth dully socket & switches to be measured and paid separately

(d) -ditto- as above item No 2 (c) but Same board

M&L point wiring with PVC unsheathed multi stranded copper conductor cable 4 sqmm FRLS 1100 Volts in New PVC concealed conduit in new M S steel terminal boxes modular/terminal box of 1.6 mm thick and hylam sheet cover including one run of using 4 sqmm FRLS 1100 Volts copper conductor cable as earth continuity connected to common earth for one power point, complete all as specified and directed.

M&L Submain wiring with two run single core 1.5 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 volts grade in and including PVC conduit ISI marked conealed alongwith one run of 1.5 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to main DB and testing on completion etc complete all as specified and directed. Note: Three runs of 1.5 sqmm cable and one run of PVC conduit shall be measured as one RM.

M&L Submain wiring with two run single core 4 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 volts grade in and including PVC conduit ISI marked concealed alongwith one run of 4 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to main DB and testing on completion etc complete all as specified and directed. Note: Three runs of 4 sqmm cable and one run of PVC conduit shall be measured as one RM.

M&L Submain wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 volts grade in and including PVC conduit ISI marked concealed alongwith one run of 6 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to main DB and testing on completion etc complete all as specified and directed. Note: Three runs of 6 sqmm cable and one run of PVC conduit shall be measured as one RM.

M&L Submain wiring with two run single core 10 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 volts grade in and including PVC conduit ISI marked conealed alongwith one run of 10 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to main DB and testing on completion etc complete all as directed. Note: Three runs of 10 sqmm cable and one run of PVC conduit shall be measured as one RM.

M&L switch Modular type 6 Amps, SP one way 230V AC complete all as specified and directed.

M&L Modular socket outlet 5 pin 6 Amp socket 2 module complete all as specified and directed.

M&L switch bell push Modular type 6 Amps 1W-1 module, 230V AC complete all as specified and directed.

M&L switch Modular type 16 Amps with indicator lamp 230V AC complete all as specified and directed.

M&L Modular socket outlet 5 pin 6/16 Amp universal socket 2 module complete all as specified and directed.

S&F Modular five stepped type electronic fan regulator 2 module 360 degree rotatable type 230V AC complete all as specified and directed.

M&L ceiling rose 3 phase PVC polycorbonate, isolated body complete all as specified and directed.

M&L bell ding dong AC,230 volts,single pole all as specified and directed.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amp, 240 Volts all as specified and directed.

Disconnecting elect connection and taking down of ceiling fan / Exaust fan/fresh air fan of any make and any height, dismantling blade and removing fan alongwith blade for depositing in MES store yard complete all as specified and directed.

M&L angle Lamp holder with metallic ring, PVC/Polycorbonate type with back plate complete all as specified and directed.

Supply and fix in replacement LED batten luminaire surface mounted 4 feet system wattage of 20/22 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

Supply and fix LED batten luminaire surface mounted 2 feet system wattage of 12 watts and not less than 1000 lm with life time of 50000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.95, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, Class - 1, SDCM <5 short circuit and over circuit protection, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, system efficiancy at luminarie level ≥80 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed.

S&F 10/ 12 watts LED bulkhead fitting, PVC body including connecting up with necessary PVC sheathed 3 core 1.5 Sqmm copper conductor flexible wire fixed complete all as specified and directed.

Supply and Fix 45 W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie is 100lm/W with a life class of 50,000 burning hours at L70. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including 40mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete all as specified and directed.

Supply & fix fresh Air fan 250mm sweep with louvers including connecting with suitable size of copper conductor from ceiling rose to fan and making hole of suitable size and matching with the existing coloure of wall complete all as specified and directed.

S &F heavy duty exhaust fan 230 mm sweep metal type including provision of 3 core PVC insulated sheathed 1100 volts grade flexible cable with stranded copper conductor from ceiling rose to fan, length as per requirement at site complete all as specified and directed.

Supply and fixing ceiling fans three blade, Robust and reliable inverter motor (brush less DC Motor) powered by ECM technology, BEE 5 star rating for energy saving, ISI mark, rated Air delivery >220 cum/min, service value > 6 AC single phase 230/240 V of size 1200 mm sweep including making connection with three core flexible, copper cable pvc insulated of suitable length, complete all as specified and directed. Note : Fan should be electronic regulator operated and not remote operated.

S&F water heater storage type Geyser vertical type with suitable size of fastner and incl provision and connecting up of SS braided pipe with adopter for inlet and outlet water connection having adjustable knob for temperature control and inner tank should be glass line coated tank and outer body material of ABS with high pressure with standing enabling (up to 8 bar pressure) capacity , should be glass line coated capacity 25 ltrs having heating element 1.5 KW and not less than 5 star ratingh suitable for 230 Volt , 50 Hz electric supply complete all as specified and directed.

S&F LED bulb 9 watts, 900 lumens output, 6500K suitable for B-22 base complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dai and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) including testing ion complete all as specified and directed.

S&F DB SPN 8 way with 100 Amp rated bus bar double door complete all as specified and directed.

S&F DB SPN 4 way with 100 Amp rated bus bar double door complete all as specified and directed.

S&F MCB SPN 40 Amp "C " curve complete all as specified and directed.

S&F MCB SP 6-32 Amps 240 volts curve 'C' series 10 KA 50 HZ complete all as specified and directed.

S&F in repair factory made epoxy powder coated Load line Distribution Board TPN-4 ways with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including insulated 200 Amp copper bus bar, Isolated neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one TPN- MCCB 125/160 Amp as incomer and 32 to 63 Amp SP MCBs outgoing complete all as specified and conforming to IS : 8623 complete all as specified and directed.

M&L MCCB 125 Amps, 4P, 415 volts 16 KA 50 HZ with thermal magnetic setting complete all as specified and directed.

Excavation in trenches in soft/loose soil n. exc 1.5 Mtr wide and not exc. 1.5 M deep and getting out including forming bottom surface for laying of pipes complete all as specified and directed.

Returning filling in including spreading, leveling, watering and well ramming in layers not exc 25 mm thick complete all as specified and directed.

Removal of excavated material to a distance not exc 50 Meter and depositing where directed at a level not exc 1.5 M above the starting point complete all as specified and directed.

Supplying, laying and cushioning for cable protection in trenches 8 cm deep before laying cable and 15 cm deep over the cable including well punning complete all as specified and directed.

Supplying, laying sub class 'B' bricks old size with axis of the bricks perpendicular to the axis of the cable as in cable protection complete all as specified and directed.

Material, labour jointing & testing XLPE insulated armoured heavy duty electric cable with standard aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm 4 core including making connection with suitable size of cable gland, aluminium lugs etc complete including taking down old U/S cable complete all as specified and directed.

Supply & Fixing in replacement GI tubing light grade in trenches/fixed to wall/ceiling including required GI fitting of size 40mm dia complete all as specified and directed.

VED PRAKASH ARORA

M/S Sunil Steel Works

pooja construction

M/S Parshant Associates

Third Wave Services Pvt Ltd

imran construction company

Third Wave Services Pvt Ltd

imran construction company

M/S Sunil Steel Works

VED PRAKASH ARORA

M/S ANIL KUMAR

pooja construction