WBPWD/EE-II/CKHED/ eNIT-74/25-26R

Amount

Distn. Wiring in 22/0.3 (1.5 sqmm) single core standard 'FR' PVC insulated & unsheathed single core standard copper wire (Finolex/Havells/RR/Kable /KEI/Glowstar) in 19 mm core, 3 mm thick polythyn pipe complete with all accesorries embedded in wall to light/fan/call bell points with modular type switch (Brand approved by EIC) fixed on modular GI switch board with top cover place flushed in wall incl. mending good damages to original finish. (Average run 8 mtrs.)

a) On board [Vide page no-E-24,item no-3(a)]

b) Average run 10 mtr [Vide page no-E-25,item no-5(e)]

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Finolex/Havells/RR/Kable /KEI/Glowstar) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire incl. cutting channel and making necy. connection as required. [E-9,1]

a) 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC [Vide page no-E-9,item no-1(s)](For power board)

b) 2x6 sqmm+1x 4 sqmm ECC) [Vide page no-E-9,item no-1(y)].(For SPNDB connection)

c) 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC [Vide page no-E-9,item no-1(a1)] (For 3 nos AC)

f) 4 x 16 sqmm + 2 x 10 sqmm ECC) [Vide page no-E-9,item no-1(g1)] (For Exixting VTPN to TPN Connection)

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.[Vide page No F-5, Item No-9 (i)& (ii)]

a) 2x2.5 sqmm+1x 1.5 sqmm ECC [F-5,9(i)]

b) 2x4 sqmm+1x 2.5 sqmm ECC [ F-5,9(ii&i)]

c) 2x6 sqmm+1x 4 sqmm ECC) [ F-5,9(iii&ii)]

e) 4 x 16 sqmm + 2 x 10 sqmm ECC) [ F-5,9(v&iv)]

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. [ D-9,13 ] Incoming - 230V,40A, DPMCB Isolator [Legrand] (1-nos) [D-5,6] Outgoing - 10KA, (C-characteristics) 6-32A, SPMCB [Legrand] - (12-nos) [D-6,7]

2+12 way [Legrand/ L&T]

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment [D-10, 14] Incoming - 415V,63A, FPMCB Isolator [ Legrand ] (1-nos) [ D-5,6 ] (1-nos) Outgoing - 10KA, (C-characteristics) 6-32A, SPMCB [ Legrand ]- (18-nos) [ D-6,7 ]

6 way [Legrand/ L&T]

Supply & Fixing 240 V, 4 nos. 6/16 A, 5 pin Modular type plug socket with 4 nos. 16A Modular type switch, 20A Modular switch type SP MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-19,15 ] (Make:- Legrand/Cabtree)

Supply & Fixing 240 V, 3 nos. 16 A, 3 pin Modular type plug socket with 3 nos. 16A Modular type switch (Brand approved by EIC), 20A Modular switch type SP MCB (C-Curve) and Indicator without plug top on 2 row 12 Module GI Modular type switch board with 2 row 12 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-18,13] (Make:- Legrand/Cabtree)

Supplying & Fixing Industrial Plug & Socket board with 415 V, 30A, TPN & Earth Metal Industrial Plug socket & 30A Industrial top incl. S&F 32 A TPN/FP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection. [D-12,18](Make:- Legrand/Cabtree)

Supplying & Fixing of PVC water proof type Loop box(Make-Sintex) of size 8"X10" comprising of 4 way 100 Amp. Capacity brass Stud/ terminal make- AC /DC. & 63A FP MCB (L&T) having hinged PVC top cover & 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement,one NL on porcelain insulator etc. on wall as per direction of EIC

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision with 415V,63A four pole MCB,concealed in wall after cutting the wall & mending good the damages to original finish incl. painting,connection & provision for earthing. attachment(D6/7+D9/11)(Make:- Legrand/Cabtree)

S & F of UV lamp for protection of Contamination at Cell Culture lab incl necessery arrangement with [make- Philips or equivalent] with suitable frame incl. connecting the length of PVC insulated wire and mending good damages to original finish with as directed by EIC.

Supply & Delivery of 240V recess mounted round LED downlight having following wattage, in white powder coated pressure die cast aluminium housing with glare free uniform illumination, suitable for 2' x 2' grid ceiling with CCT (5700K-6500K) having minimum luminous efficiency of 100 Lm/ Watt or better A & 50,000 LED burning hours or more. [Make- Philips/ Wipro/Lighting 1,:1 Technology/ manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification](Existing lab)

Supply & Delivery of 240V recess mounted 2'x2' LED downlight having following wattage in white powder coated pressure die cast aluminium housing ,with glare free uniform illumination, suitable for 2' x 2' grid ceiling with CCT (5700K- 6500K) having minimum luminous efficiency of 120 Lm/ Watt or better & 50,000 LED burning hours or more. [Mal{e- Philips/Wipro/Lighting Technology/ manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification]

Supply and fixing of 6 feet Metal Body Air Curtain above Entrance Door with High Effiency, low noise(less than 40db and 2 years warrenty incl necessery arrangement as per EIC.

Supply & Delivary of minimum 7kw nominal cooling capacity celing suspended concelead split Air conditioner with R410A/R407C/R-32 refrigerent with single scroll compressor/Swing compressor in inverter machine,suitable for operation on 240V 50Hz 1 phase AC supply with precharged refrigerent,wire or wireless remote & all other acessorries.(Make:Mistusibishi heavy industries model FDUM71CNV-S6-S6/O General model ARG25FUAN+AOG25FNANL).

Erection & Commissioning Charges incl. refrigerant with R410A/R407C/R-32 7 kw concealed type Split Air Conditioner

Copper Refrigeration pipe line for liquid and suction line with fittings, elbows, bends, supports & brackets (Make-Ryoku)

a) Discharge line 9.5mm dia minimum thickness 0.8mm with 9mm thick nitrile insulation(Make:Rajco/Royku)

b) Suction line 19.05 mm dia minimum thickness 0.99 mm with 9mm thick nitrile insulation(Make:Rajco/Royku)

Control copper Cabling from Condensing Unit to control panel (Make: KEI/polycab/ finolex)

a) 4 core 2.5 sq.mm communication cable

S & L of Drain Water piping work out of PVC / HDPE hard pipes of following sizes incl. fitting, accessories, bends, elbows, tees, flanges, tapings, wall sleeves, hangers, supports, anchors.

a) 25 mm dia

Charges for scaffolding arrangement incl. lifting for outdoor & indoor units

Supply and fixing flexible canvass connection for concealed split air-conditioners.

charges for trap door of 1600 mm x 600 mm and 9 mm thickness made of aluminium channel & ply wood for IDU maintenance.

Supply and Fixing AL power Coated countintuous girll (Make-Premier)

Supplying, fabrication & fixing M.S u-channel of 6 mm thick of size (50 mm x 50 mm x 6 mm) for making platform for installation of outdoor unit of Concealed split AC incl. drilling 2 nos holes in each channel including cutting holes into the wall & grouting the same with cement concrete (1:1 ½ :3) etc. fabricated with horizontal angle of 25 mm x 25 mm x 6 mm including supporting angle 50 mm x50mm x 6 mm in each platform in outer edge for transmitting the load centrally through 2Nos. (50 mm x 50 mm x 6 mm) Angle inserted into the exiting wall. The entire structure should be barricaded & safe for ODU maintenance. Area of the platform is 3Mtr. x 1.2Mtr. Structural design should be approved by E.I.C.

Supplying, fitting & fixing in position suspended boxing for return air arrangement & indoor units of concealed split airconditioner with frame work of aluminium hollow section of size 50mm x25mm (2.0mm thickness) combined with aluminium corners of size 38mm x 25mm, suspended by aluminium hollow tube section of size 38mm x 25mm ,25mm x 25mm powder coated wall angle with aluminium composit panel of thickness 3.0mm comprising of protective film, polyester coating, primer, aluminium coil, adhesive film, polyethylene core again with one layer adhesive film, aluminium bottom coating and finally service coating as per manufacturer's specification finished with aluminium screw and silicon sealent including suitable arrangement for grill fixing complete in all respect as per direction of EIC.

Cutting iron windows and macking door there for passage for outdoor installation, fixing and provision for future maintenance purpose. Including charges of welding , masonary charges, labour charges and materials charges for sand ,cement , chipes etc.

Supply & Fiixing of indoor type LED SIGN Board i) 6'(L)x4'(B)x.5''(W) ii) 6(L)x4'(B)x.5''(W) fabricated from 3 mm thick ACP sheet on all five sides finished with approved metallic colour & suitable size hollow Al rectangular bar as frame inside the box. All LED Module, wiring to be fixed inside the ACP box. Silicon adhesives, SS screws to be used in such a way so that ingress of water can be restricted inside the box and maintenence / replacement of the LED modules can be done easily. All screws/nuts & bolts/clamps etc metals used inside the box should be of non-ferrous metal/Stainless steel.

SIZE-i)6'X4'=24 sqft.x2 (Front/back)=48.00 sqft ii)4'X0.5'=2.0 sqft x2(Top/bottom) =4.00 sqft iii)6'X0.5'=3.00 sqft X2 (Top/bottom) =6.00 sqft Total=58.00 sqft MULTI-DISCIPLINARY RESEARCH UNIT CELL CULTURE LAB

Supply & Fixing of Special type of 3D Boxing type letter(6" x 3.5") with top cover openable made from imported 3mm thick Acrylic sheet to accomodate LED module. Only front side of the letter should emit light. side to be made from opaque acrylic sheet. Letter height, width & depth of the letter will be proportionate & as per direction of E.I.C.. Suitable Ratio should be maintained between the letter size, spacing between each letters & spacing between each words as per the direction of the E.I.C. (Calculation of area (square inch) of a letter will be HeightXBreadth of the letter inclusive all wastage. ( letter 33 nos) i)6”x4”=24”Per letter x 30 nos. letter=720 sq.inch*80%=576 sq.inch II)6”x2”=12.00”Per letter x14 nos. letter=168.00 sq.inch*80%=134.00sq.inch Total-215.00 sq inch

Supply & Fixing of LED within the acrylic letter from backside (Make: SAMSUNG-Korea/ROHS) having the following specifications: COLOUR:WHITE or as per the choice of EIC. LIFE:70,000 burning hours. INTENSITY: Uniform without any bright/dark patches. VISIBILITY: 100Mtrs at least for normal eye vision. AMBIENT AIR: 0-50°C; 100% Relative Humidity. POWER CONSUMPTION: 1.5 Watt per module.

SITC of water proof 400 watt Power Supply unit to be fitted inside the Sign board box. inclusive of water tight gaskette fitted stainless steel hinged door box. Input: 100V-240V AC; 4A; 50Hz. Output: 12V DC; 17-20A constant power supply. Make: Meanwell/Ven/Resang or equivalent.

Supply & Fixing of structural type frame suitable for ACP fascia fixing of size (6" x4"x 2" ) to be made by 3mm thick 2" dia square pipe including necessary machining , welding and jointing materials.

Supply & Fixing extra supporting of structure by 3mm thick 1"x 1" square pipe of 6" & 4" length 4 nos each .

S & F of 26 SWG G.I. sheet for covering of back side of iron frame incl. fabrication charge.

Painting the MS structure with 2 coats of RO primer and one coat of synthetic enamel paint after scrapping the structure emery paper properly.

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Finolex/Havells/RR/Kable /KEI/Glowstar) of through 20mm dia PVC rigid conduit pipe and by the prelaid GI fish wire and making necy. connection as required

3 x 22/0.3 (1.5 sqmm)

Transpotatation charges of the above mentioned board from Co's workshop to work site.

Rate is inclusive all taxes and cess

Defect Libility Period 1 year

A.P. ELECTRICAL (BID ID -7542273)

DB Enterprise (BID ID -7729115)

EFFORTECH (BID ID -7723248)

M/S Basak Electrical Repairing House (BID ID -7632698)