SPECIAL REPAIR REPLACEMENT TO IRON DOORS AND RAILING AT TEJAS AT AFSSR UNDER GE AF GURGAON

Amount

Dismantling wrought iron or mild steel work of any description not otherwise provided for upto height of 25 mtr in multi-story Md Accns complete all as specified and as directed.

Demolition of reinforced cement Concrete of any description and in any position not otherwise upto height of 25 mtr in multi-story Md Accns complete all as specified and as directed.

M&L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter for curved faces of concrete with fair finished surfaces upto height of 25 mtr in multi-story Md Accns complete all as specified and as directed.

M&L for providing cement concrete of Type B1 1:2:4 (20mm graded aggregate) in parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, upto height of 25 mtr in multi-story Md Accns and exposed PCC surfaces shall be plastered with 5mm thick cement plaster in CM 1:3 and finished with OBD/Exterior emulsion paint to match with srounding area and cost of same shall be included in quoted rates of concrete complete all as per specified and as directed.

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 upto height of 25 mtr in multi-story Md Accns complete all as specified and directed.

M&L for two coats of synthetic enamel painting over a Priming coat of Red oxide Zinc chrome on New/Old steel surfaces of any description over 10 cm in width or girth not otherwise described including prepration of surfaces upto height of 25 mtr in multi-story Md Accns complete all as specified and directed.

Taking down Chowkats or frames from the opening of size exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and as directed.

M&L for pressed steel frames 1.25mm thick for door size of frame125 X 60mm with double rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-0 (using 12.5mm graded stone aggregates) and for filling of hold fast with PCC 1:3:6 and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfaces complete all as specified and as directed.

Easing and adjusting steel door frame and shutters including taking down shutter and refixing after necessary repair works(in same opening) of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and as directed.

S&F 35mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed.

S&F 2nd class hard wood Glazed/skeleton shutters, 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire stapel etc complete all as secified and as directed.

S&F aluminium anodised barrel tower bolt of extruded section 200mm size, stove enamelled black, with bolt complete all as specified and as directed.

S&F Aluminium handles, 150mm size cast type anodised complete all as specified and as directed.

S&F Double legged Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm complete all as specified and as directed.

S&F stainless steel 100 mm long butt hinges for iron door shutters and frames complete all as specified and as directed.

M&L for preparation of new wooden surface of any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed.

k k enterprises

Chaudhary Constructions

ASHISH AND CO

M/S ujjwal associates

VIJAY KUMAR GUPTA

Nikunj Bansal Govt Contractor

M/s GANJOO AND CO

shiv shanker enterprises

M/S Rohit Enterprises