CWE/HSR-07 OF 2021-22

Amount

Dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete,brick work,masonary etc. any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantling of any type fencing, chain link or barbed wire fencing & wire mesh etc.

Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, and removing surplus soil to a distance n.exc 50 m in soft/ loose soil.

M&L PCC 1:3:6 type C2 using 40 mm graded stone aggregate in foundations, filling and mass concrete.

S&F mild steel work in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) plain MS bars etc including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete

Supply only Chain link MS galvanisd fencing, any size or type

M&L preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

M&L mild steel round bars 10mm dia and over, cut to length, bent to shape required, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to Gde E-165 (Fe-290) complete all as specified.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n exc 10cm long Dia meter of Shank 5 to 10 mm

S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

Demolition brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L Brick work with old size flyash bricks, straight or curved on plan exc 6m mean radius built in CM (1:6).

M/L providing, cement concrete Type B1 1:2:4 (12.5 mm graded aggregate) in in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not proivded for in Item 159, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed.

M&L for precast louvres and jallies, in cement concrete 1:2:4 type B 0 using 12.50 mm graded crushed stone aggregate set in CM 1:6, 35 mm thick (measured solid), including all mould- ings but excluding frame including dismantling old cement concrete jalli complete all as specified and directed .

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement.

Preparing new plastered surfaces and applying two coats of cement base paint over one coat of primer complete.

Site clearance incl clearance of shrubs,vegetation, grass, bush, weed, and rubbish/useless materials disposed off upto a distance 50 m outside the periphery of the area.

M/S RAJINDER SINGH

Horizon Construction Company

LACHHMAN SINGH AND BROTHERS

malik constructions