Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.7 LAccepted-AOC PLOT NO 46 SECTOR PH I 03 GREATER NOIDA UP 201306 | GAUTAM BUDDHA NAGAR | UTTAR PRADESH | 201306 | L1 | Accepted-AOC Found Lowest bidder | |
| 2 | L2₹32.8 L+₹50,586.50 (1.56%)Rejected-Finance 91 DEFENCE ESTATE PHASE II NEAR AMBEDKAR PARK DEORI ROAD AGRA UP | AGRA | UTTAR PRADESH | 282001 | L2 | Rejected-Finance 2nd lowest | |
| 3 | L3₹34.9 L+₹2.6 L (7.95%)Rejected-Finance 34 KAISER GANJ MANDI DIST MEERUT UP 250002 | MEERUT | UTTAR PRADESH | 250002 | L3 | Rejected-Finance 3rd lowest | |
| 4 | L4₹35.4 L+₹3.1 L (9.60%)Rejected-Finance 128 ALLEN MARKET SADAR KABARI BAZAR MEERUT CANTT 250001 | MEERUT CANTT | MEERUT | UTTAR PRADESH | 250001 | L4 | Rejected-Finance 4th lowest | |
| 5 | L5₹36.5 L+₹4.1 L (12.8%)Rejected-Finance | L5 | Rejected-Finance 5th lowest |
Tender Value
₹48.8 L
EMD Value
₹97,580
Closing Date
26 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (North) Meerut Cantt
Office of the GE (North) Meerut Cantt
SPECIAL REPAIR TO BLDG NO P 245 AND P 247 (OR COOK HOUSE) OF 283 FD REGT AND PROVN OF SOAKAGE PIT NEAR COOK HOUSE AT 9 INF DIV PRO UNIT OF OFFR TOILET AT ADM BLOCK OF HQ 9 ARTY BDE UNDER AGE B/R-I AND AGE E/M-I OF GE (NORTH) MEERUT CANTT
2023_MES_610967_1
8423/E8
Open Tender
Civil Works
Item Rate
180 days
Meerut
Class D category a (i)
8 documents required · 8 mandatory
₹500
GE (North) Meerut Cantt
₹97,580
Yes
10 Oct 2023
27 Jul 2023
28 Aug 2023
27 Jul 2023
26 Aug 2023
12 Aug 2023
Amount
Taking down cement plaster on Brick or concrete surfaces including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
Demolition of brick work or rubbled stone masonry including all quoins arches pillars etc built in cement mortar and including removal from the site complete all as specified and directed.
Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) including floor finishes and disposal of debirs complete all as specified and directed.
Dismantling Asbestos cement (Plain, corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid and pointed in any mortar etc complete all as specified and directed.
Dismantling timber scantlings 40 sqcm and over in section, in any position unframed work complete all as specified and directed.
M&L for brick work with fly ash sub class 'B' old size bricks straight or curved on plain exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for brick work with fly ash sub class 'B' old size bricks straight or curved on plain exceeding 6m mean radius built in cement mortar 1:4 complete all as specified and directed.
S&F prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness, including cover fillets and GI frame work complete all as specified and directed.
S&F GI snap grid frame work for false ceiling of size of grid 605x605mm all as specified and Hangers 4mm dia GI (upto 1200mm length) adjusting level fixed to steel frame work complete all as specified and directed.
S&F fiber cement coloured textured designer ceiling board 4mm thick of size 595x595 mm conforming to IS : 14862 & IS : 2380 Part-XIV fixed to timber / GI / Aluminum frame work with screws/clips complete all as per manufactures instructions and as complete all as specified and directed.
S&F in repair PVC Sheet wall Paneling (sand witched between the longitudinal grid in PVC Sheet) 85 mm thick, any pattern fixing at site with PVC beading/fillet complete all as specified and directed.
S&F rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with single cleats or other connecting plates quality conforming to Fe-410W(Gde E-250). quality A complete all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) 25 mm thick for Sub base flooring complete all as specified and directed.
M/L 75 mm thick cement concrete 1:4:8 type D-2 using (40 mm graded stone aggregates) as in sub base complete all as specified and directed.
M&L for chequered cement concrete colour tiles size 300mm cmx300mmx25 mm thick, with colour pigment, set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in cm (1:6) complete all as specified and directed.
M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in bed bricks, coping etc including weathering slightly rounded or chamfered angles and throating making groves for fixing of man hole cover including necessary form work complete all as specified and directed.
M&L Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed with white or colour cement to match including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
S&F non skid coloured ceramic tiles coloured of 7 to 8 mm (square/ rectangular ) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors set and jointed in neat cement slurry and pointed with white or coloured cement over 15mm screed bed in CM 1:6 complete all as specified and directed.
All as per item No 22 above but as in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
S&F Coloured Glazed colour ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in cement mortar 1:4 joint free with grout of matching shade complete all as specified and directed.
M&L for 16-18mm thick black granite stone slab machine cut in cooking platform, jams, pillars, windows cills and the like laid over and including 15mm thick screed bed or backing coat in cement mortar 1:4 and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed.
M&L for machine cut prepolished kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing and polishing upto Granite finish complete over 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
All as per item No 26 here-in-before but factory made bull nosed as in riser of steps, skirting / dado laid over 10mm thick in cm 1:4 complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) not exceeding 1.5 sqm each, complete all as specified and directed. Note :- Rate also including in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) exceeding 1.5 sqm but not exceeding 4 sqm each, complete all as specified and directed. Note :- Rate also including in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.
S & F for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified & directed.
S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified & directed.
S&F for 30mm thick Factory made single extruded wire gauze WPC (Wood Polymer Composite) solid Moulded WPC wire gauze door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder / rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws complete all as specified & directed. Note: stainless steel butt hinges and necessary stainless steel screws shall be paid separately
S&F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified & directed. Note:- stainless steel butt hinges and necessary stainless steel screws shall be paid separately
M&L, in repair, 18/19mm thick WPC Solid board, exterior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination, fixed with SS screws to WPC frame work in cup boards, and kitchen cabinet rebated or flat edged fancy handle , each leaf 02 Nos Magnate lock complete all as specified and directed.
S&F powder coated anodised aluminum windows sliding type (3 shutter type) with sash bars, aluminum sections weighing 0.55 Kg/mtr (minimum) including stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminum beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminum frame, grill with one or more rebates including S&F 5.50 mm thick black glass complete all as specified and directed.
S&F mild steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified & directed.
S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified & directed.`
S&F Steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified & directed.
S&F aluminum sliding bolt 300 long bolt type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified & directed.
S&F 100mm butt hinges, medium weight, cold rolled, mild steel complete all as specified & directed.
S&F stainless steel butt hinges of 100 mm size, complete all as specified and directed.
S&F aluminum anodised tower bolts 150mm long, of extruded section complete all as specified & directed.
S&F 150mm size aluminum alloy handles cast type anodized complete all as specified & directed.
S&F 150mm long floor door stopper of aluminum alloy body and tongue with hard drawn steel spring complete all as specified and directed.
M&L for Framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O complete all as specified and directed
M&L stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed.
S&F Stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples including necessary beadings complete all as specified and directed.
S&F 3.00mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified & directed.
M&L for 125mm long Brass handles, cast type, polished bright fixed with stainless steel screw complete all as specified & directed.
S&F for Stainless steel wide 110 degree Hydraulic hing fixed with stainless steel screw complete all as specified & directed.
S&F 150mm long aluminum anodised barrel tower bolts of extruded section, having shoot / dia of bolt not less than 12mm complete all as specified and directed.
S&F aluminum anodised barrel tower bolt with bright bolt 200 mm long complete all as specified & directed.
M&L for stone slab 50mm thick stone dressed true and square, in one length not less than 60cm and not exceeding 120cm in copings, window cills, chajjas, sunshades, etc., punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edges rounded or chamfered as directed, set, jointed and pointed in cement mortar 1:4 complete all as specified and directed.
S&F mild steel 150mm size helical door spring including roller and roller plate fixed with screws to wooden chowkat or welded to steel frame, complete all specified and as directed.
M&L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.
M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces, finished even and smooth on ceiling in cement mortar 1:3 complete all as specified & directed.
M&L for 15 mm thick rendering using ready mix plaster bags in cement mortar1:4 on brick / concrete surfaces of external walls finished even and fiar, using water proofing compound @200ML weight of 50kg cement or as per manufacturer instructions complete all as specified and directed : Note:- Water proofing compound shall be measured and paid separately
M&L for Preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper over one coat of primer using roller for painting complete all as specified & directed.
M&L for preparing plastered un plastered new surfaces of ceiling and applying three coats of white wash on ceiling surface complete all as specified & directed.
M&L for Preparation of new plastered surface and wall by applying 2mm thick wall care putty and making the surface smooth complete all as specified & directed.
M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 liter/ 10 sqm over new surfaces using roller for painting complete all as specified & directed.
Demolition of reinforced concrete of any description and any position not otherwise specifically provide ( reinforcement cut to facilitate demolition) complete all as specified & directed.
M&L Form work to sides and soffits of beams lintels etc finished rough complete all as specified & directed.
M&L RCC 1:2:4 Type B0 using 12.5mm graded stone aggregate as in beams, lintels, bressummers over 1.5 m span etc complete all as specified & directed.
M&L precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in Chullah hood chajja and manhole cover, kitchen shelves etc set in cement mortar 1:4.including all necessary formwork & finishing exposed concrete surface all as specified and directed
M&L cement concrete 1:2:4, type B0 (12.5mm graded stone aggregate) as in coping including weathering, slightly rounded or chamfered angle and throating as directed.
M&L for applying two coats of cement base paint on walls after complete removal of existing treatment complete all as specified & directed.
M&L for applying two coats of oil bound distemper on wall surface surfaces after complete removal of existing treatment complete all as specified & directed.
S&F in repair, 25mm dia, powder coated, fancy type, aluminium decorative tubular curtain rod with decorative ball type side brackets, complete all as specified and directed.
Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified & directed.
All as per Sl Item No 70.00 here-in-before but 20 mm bore pipe.
Supplied and fixed GI water tubing 15 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.
Supplied and fixed GI water tubing 20 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.
Supplying and laying of CPVC 20mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified & directed.
Supplying and laying of CPVC 25mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified & directed.
S&F triple layer white colour 500 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes and including dismantling water tanks any type & removing complete all as specified & directed.
All as per Srl item No 76.00 here-in-before but fixed in repair including dismantling old water tank any type & remaining for site complete all as specified and directed.
S&F 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete all as specified & directed.
S&F chromium plated 15 mm bore size Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed.
All as per item No 78.00 but fixed in repair complete all as specified & directed.
S&F in repair 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with fancy type screwed both ends for iron or for union complete all as specified & directed.
S&F in repair of vitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ trap lime concrete bedding and making good floor complete all as specified and directed.
S&F Vitreous China wash basin including pedestal, white, flat back, size 550 x 400 mm, including fixing accessories like galvanized brackets & rag bolts,32 mm CP brass waste coupling complete all as specified & directed.
All as per item No 81.00 but fixed in repair complete all as specified & directed.
S&F 10 litre capacity PVC valveless, Symphonic action type, flushing cistern low level, white with inlet ball valve, float and handle including brackets and PVC flush pipe etc complete all as specified and directed.
All as per item No 81.00 but fixed in repair complete all as specified & directed.
S&F in repair PVC(SWR) floor trap 75mm bore, plain with grating including jointing with solvent cement complete all as specified & directed.
S&F in repair PVC(SWR) gully trap 125/110mm bore, plain with grating including jointing with solvent cement complete all as specified & directed.
Supply & fix PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.
Supply & fix in repairs PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.
S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified & directed.
S&F in repair Brass chromium plated shower rose 125mm size complete all as specified & directed.
S&F in repair CP brass soap dish complete all as specified & directed.
S &F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified & directed.
S&F in repairs 75mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste complete all as specified & directed.
S&F in repairs 110mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste and rain water pipes complete all as specified & directed.
S&Fin repair PVC bends 75mm bore, any radius complete all as specified & directed.
S&F PVC bends 110 mm bore, any radius complete all as specified & directed.
S&F in repair PVC bends 110 mm bore, any radius complete all as specified & directed.
S&F 110mm PVC (SWR) vent cowl complete all as specified & directed.
S&F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof complete all as specified & directed.
S&F Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia. Fixed in repair) complete all as specified & directed.
All as per Srl item No 96.00 here-in-before but fixed in repair
S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 25 mm dia. Fixed in repair) complete all as specified & directed.
S&F in repair 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstan head screwed for 15mm dia pipe fixed in repair complete all as specified & directed.
S&F in repair 15mm dia chromium plated fancy type wall mixer with over head shower for mixing hot & cold water screwed, fixing and connection to pipes complete all as specified and as directed. Make:- Cera Cat Part No F-1017401, Pearl Cat Part No ARI-015, Hindware Cat Part No- F-74 0022
S&F in repair 15mm dia chromium plated fancy type sink mixer with swinging spout (wall mounted model) fixing and connection to pipes complete all as specified and as directed. Make:- Cera Cat Part No F 2004501, Pearl Cat Part No ARI-011, Hindware Cat Part No- F 330023
S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified & directed.
S&F in repair chromium plated towel rail 20mm dia D type 600 mm long as a approved quality. complete all as specified and directed.
S&F PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe 32mm bore suitable for wash hand basins/sinks complete all as specified & directed.
M&L for injecting chemical emulsion for Post Constructional Anti-termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 liters per linear meter including drilling and plugging holes etc. in apron.
M&L for treatment the soil under plinth protection at the rate of 5 liters of emulation per square meter of surfaces area complete all as specified & directed.
Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified & directed.
M&L for 10mm thick cement pester in cement mortar 1:4 mixed with WPC @ 200ML per 50 KG weight of cement finished even and smooth without using extra cement on roof surface when concrete is green and wall (WPC will be measured and paid separately as supply only rate) complete all as specified & directed.
M&L for 50mm thick average thickness of PCC 1:2:4 type B-O(using 12.5 mm graded stone aggregates) complete all as specified & directed.
Supply only liquid water proofing compound complete all as specified & directed.
M&L for surface Preparation: The surface to receive the treatment shall be thoroughly free of laitance, scales, oil or any other loose material. It should be made free of any sharp objects. Cleaning of PCC shall be done with wire brushing to attain smooth leveled surface. Cracks shall be rectified, filled using dual shrinkage compensated Repair Mortar and dried for 72 hours before laying the liquid applied membrane. Grout: Providing Chemical injection treatment in the form of pressure grouting to the construction joint and cracked portion at 1m c/c by injecting cement slurry mixed with dual shrinkage compensated cementations grout Injection grout additive, in the required consistency through the pre fixed PVC nozzles in the 18 mm dia holes, fixing of PVC nozzles with instant setting cement. Angle fillets/Coving: Providing and making of fillet, 50mm x 50mm on sharp corner of terrace with cement sand polymer mortar (add “multipurpose mortar”, 10% by weight of cement). First apply the bonding coat of Multi-Purpose Polymer 5-10% diluted in water and add to cement slurry. Apply the bonding slurry and apply the polymer mortar over the sharp edges. complete all as specified & directed. Note: Grouting will be done when and where ever required.
Treatment of pipe entry points: Preparing the inside surface of core and PVC /MS Pipe by roughening using suitable Sand paper to get better adhesion prior to packing works. Cleaning the surface by wire brushing followed water jet to remove any laitance or loose flaky particles. Packing the gap using free flowable non shrink cement polymer based grout up to the surface of the bore while the bonding agent is in tacky state. the periphery of PVC pipe should be sealed with Hybrid PU Sealant or dual shrinkage compensated Micro concrete Note: Will be done when and where ever required Application of Asian Paints two component Epoxy Primer (Resin & Hardener) on the cleaned surface for bonding of Polyurethane with the existing concrete surface
33 % water dilution is recommended with the pure mixed primer. The primer mixing ratio will be 1:3(Resin:Hardner) Supplying, providing and applying waterproofing treatment to Podium area with single component highly elastomeric seamless cold applied modified PU coating complete as per manufacturer’s specifications and application methodology. The same coating shall be applied in two coats achieving a total thickness of 1mm. The coating shall have a dual combination of 280% elongation. Material coverage 1.2kg /sq.mt. (Note: Contractor is required to deposit 100% CA quantity to the Engr-in-Charge, within 15 days of acceptance of contract.
M&L for repair to overhang portion of chajja, facia, drop wall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with cement mortar 1:3 after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish. (Height of work to be considered above 3.5m and upto 7m from FFL of Ground Floor.) (Note : Wherever reinforcement is required to be provided will be paid separately under relevant item and contractor have to inform the department one day in advance after binding of reinforcement for measurement otherwise no payment will be considered on this account) complete all as specified & directed.
M & L for repairing existing RCC structure work by grunting to damaged edge bottom of beam , chajja, slab 40 to 60mm thick and part of RCC member in cement mortar 1:3 & depositing material/ mortar with spray gun under a pressure of 20 to 30 N/CM2 including scaffolding and welding wire mess 2 mm dia and size of wire mesh 50mm X 50 mm including cutting welding and placing position as directed by Engr in-charge.
Surface excavation in soft/loose soil not exceeding 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth in soft/ loose soil for foundation etc or for shaft, wells, manholes, pier holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out and leveling of bottom surface to required level complete all as specified and directed.
Returning filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in soil complete all as specified and directed by Engineer-in-Charge.
Removal of excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified & directed.
S&F Ready Made Precast reinforced cement concrete 1;2;4 type B1 using 20mm grade stone aggregate, factory made manhole covers of size 450x900x50mm thick , set in cement mortar 1;6 complete all as specified & directed.
M&L for 200mm Ultra PEDWC (Double wall corrugated) pipe and all necessary fittings and fixtures complete all as specified & directed.
M&L for Concrete bed to drain pipes including packing under and hunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 for 200 mm bore pipes complete all as specified & directed.
Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and forming benching as required. Internal dia of pipe 150mm complete all as specified & directed.
M & L for construction of Soakage wells , of size 2.40m dia & 6.00m depth ( effective depth 4.5 m ) in ordinary Soil, Foundation in PCC 1:3:6, wells of Honey combed brick work including intercepting chamber, screen chamber Brick work in cement mortar 1:4 RCC cover slab in M-25/ RR masonry / Filling with brick bats, all as including necessary earth work in any type of soil (soft / loose / hard / dense) all as shown on drg No TD-309 Sh. 1/4 to 4/4. complete all as specified and directed.
M&L Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundation filling and mass concrete complete all as specified & directed.
M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe- 415, Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed. Note :- Weight of binding wire shall not be considered for measurement and payment purpose.
M&L for mild steel TMT bars 6mm to 8mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe- 415, Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed. Note :- Weight of binding wire shall not be considered for measurement and payment purpose.
M&L for providing reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregates) foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, and mass concrete complete all as specified and directed.
M&L for providing reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregates)as in columns, pillars, piers, posts and struts complete all as specified and directed.
M&L for providing reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregates)as in beams, cantilevers, bressummers, lintels over 1.5m clear span complete all as specified and directed.
M&L for providing reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregates) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, and in shelves and the like complete all as specified and directed.
M&L for providing formwork to sides of concrete foundations, footings, bases of columns raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces of concrete flat complete all as specified and directed.
M&L for providing formwork to sides of square ,rectangular or polygonal pillars, posts, struts, piers, and columns rough finished surfaces of concrete flat complete all as specified and directed.
M&L for providing formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, exceeding 1.5m clear span cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of concrete flat complete all as specified and directed.
M&L for providing formwork to soffits of suspended slabs such as roof slab , floor slabs , landing ; chajjas and similar work not exceeding 200mm thick; flat rough finished surfaces of concrete flat complete all as specified and directed.
M&L for providing formwork to chullah hoods, chajjas, troughs and similar items including edges, rough finished surfaces of concrete flat complete all as specified and directed.
M&L for hardcore of broken brick of burnt clay bricks (well graded) bricks of gauge not exceeding 63 mm , deposited spreaded , leveled in layers not exceeding 15 cm thick watered and rammed to a true surface complete all as specified & directed.
S&F rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to Fe-290 (Gde E-165) complete all as specified and directed.
M&L Preparation of new plastered surface of wall by applying 3mm thick wall care putty and making the surface smooth Finishing walls and applying Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)using roller for painting complete all as specified & directed.
S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing shown on page 178 of SSR Part-II complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gather with solvent cement, supplying & fixing in the frame at site as per specification & drawing on srl page No 174 of SSR Part-II complete all as specified and directed.
S&F vitreous china wash down water closet pan (pedestal pattern), white with 'P' or 'S' trap and seat cover (excluding flushing cistern and flush pipe) including connection to drain or out going pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed
S&F vitreous china urinal bowl, flat back of size 465x355x265mm (minimum) white with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and directed.
M&L for urinal partition makrana white of size 310 x 700mm complete all as specified and directed.
S&F angular valve, 15mm bore dia, cast copper alloy, CP fancy type with long shank and cup(concealed type) screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.
S&F PVC Floor trap 75 mm dia with CP grating including jointing to waste pipe fixed in cement concrete PCC 1:2:4 type B1 complete all as specified and directed.
S&F 300 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.
S&F pillar taps, 15mm dia cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F 110mm bore UPVC(SWR) pipes single socketed in any length with rubber ring joint, laid in trenches/under floor complete all as specified and directed.
S&F 110mm bore dia UPVC(SWR) pipes single socketed in any length with rubber ring jointed fixed to wall complete all as specified and directed.
M&L for SGSW 'grade 'A' drain pipe 150 mm internal dia laid in trenches, jointed and tested complete all as specified and directed.
S&F brass chromium plated stop valve 15mm bore, fancy type with long shank and cup (concealed type), screwed both end for iron pipe or for unions complete all as specified and directed.
M&L for water proofing treatment to existing non-accessrible roof slabs by providing 10mm thick bedding layer of cement mortar 1:3 mixed with water proofing compound as per manufacturer's instruction and applying one coat of bituminous / polymerized primer confirming to IS-3384 @ 0.30 Ltr/ Sqm and applying one coat of bonding material using blow type bitumen conforming to IS-702 grade 85/25 @ 1.20 Kg / Sqm and laying of actetic polypropylene (APP) modified memebrane pre--fabricated, reinforced with non woven polyester of 3.50 Kg / Sqm (minimum), 3mm thick (minimum), with minimum 75mm side overlaps and 100mm end overleps and applying one coat of bitumenous aluminium paint over APP membrane complete including taking down exisitng water proofing treatment with bedding layer of cement mortar complete all as specified and directed.
Taking down carefully any type of battens or conduit point wiring with conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified & directed.
Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in and including PVC concealed conduit of any size/dia complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth duly complete all as specified and directed for the followings :- One tube light/Bulb/ street light point controlled by one, one way switch 05 / 06 Amps.
All as per Srl item No 154.00 here-in-before but One fan point controlled by one, one way switch 05 / 06 Amps complete all as specified & directed.
All as per Srl item No 154.00 here-in-before but One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch complete all as specified & directed.
All as per Srl item No 154.00 here-in-before but One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch complete all as specified & directed.
All as per Srl item No 154.00 here-in-before but One Bell point controlled by one, one way switch 05 / 06 Amps complete all as specified & directed.
All as per serial item No 154.00 here-in- before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board complete all as specified & directed.
S&F switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed.
S&F in socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed.
S&F of socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed. of make Cona/Legrand/SSK.
S&F in switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed.
S&F bell push flush type , 5 amps , 240 volts make Plaza/Cona/SSK complete all as specified & directed.
S&F Bell,AC , 230 volts ,Single poler Cona/Anchor complete all as specified & directed.
S&F lamp holder (Angular / Straight), insulated body, with back plate complete all as specified & directed.
S&F Led lamp 9/10 watt complete all as specified & directed.
S&F decorative wall mounted LED tube light fitting 20 watt with polycarbonate housing with all accessories and fixing material complete all as specified and directed.
S&F decorative LED tube light fitting 10 watt wall mounted with extruded polycarbonate ,integrated lamp & driver with opal diffuser and decorative end plates complete with all accessories and fixing material complete all as specified and directed.
S&F 1X35 W LED Building security light energy saving & environmental friendly long life luminaire with high power LEDs as light source and electronic driver including security light brackets of 32 mm dia GI pipe medium grade upto 1.2 mtr long bend to shape at 100-120 degree including flat iron clamps and Suitable nuts and bolts grouted in wall including all material required for fitting complete all as specified & directed.
S&F in repair XLPE insulated armored heavy duty electric cable with aluminum conductor 1100 volt grade cross sectional area of 35 sqmm 3.5 core complete all as specified & directed.
Supply and spreading clean fine dry river sand in trenches for cushioning of under ground cable/ cable duct complete all as specified and as directed. Note: Only punned thickness shall be measured for payment purpose complete all as specified & directed.
M&L for fly ash brick protection length of brick shall be laid across the length of cable) complete all as specified & directed.
M&L for GI light grade tubing 40mm dia laid in trenches, road crossing , passing through pipe or laid in wall/pole complete all as specified & directed.
S&F of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed.
Taking down carefully unserviceable Sub main wiring of any size and type, removing material from site to store for keeping in safe custody for reuse at site making good the disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified & directed.
M&L for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed.
Taking down carefully unserviceable distribution board of any capacity including wooden board and making good the disturbed surfaces of walls, etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified & directed.
S&F sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified & directed.
S&F MCB, SP, AC, 240 volts "B" series capacity of 06 to 40 Amps, 10kA and making connections complete all as specified & directed.
S&F MCB, DP (Double Pole), AC, 240 volts, B series capacity 32 Amps to 40 Amps 10kA and making connections complete all as specified & directed.
S&F MCCB 4 pole,100 Amps 25 kA complete all as specified & directed.
S&F Vertical Load line sheet metal enclosure double door, Triple pole and neutral (TP&N vertical load line) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection, with provision of 25 kA 100 Amp G frame MCCB. Make- Legrand/Schneider/ABB with the inbuilt provision for fixing of 1 No MCCB and 12 Nos MCB'S inside of DB, with metal door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing one complete all as specified & directed.
M&L for earthling complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.
S&F Exhaust fan metal body with louver and fixing accessories 230 Volt and 450mm sweep complete all as specified & directed.
S&F fan ceiling complete with electronic type regulator and accessories 230V, 1200 mm sweep. BEE 5 Star rated complete all as specified & directed.
S&F XLPE insulated armored heavy duty electric cable with aluminum conductor 1100 volt grade cross sectional area of 10 sqmm 2 core complete all as specified and directed
S&F Exhaust fan steel body AC single phase 230/240V size 250 mm sweep with blades, and louvers complete all as specified and directed
S&F sheet metal enclosure single pole & neutral for 240 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed
S&F Water heater storage type steel body with copper inner tank and heating element upto 2KW capacity 25 ltr, BEE 5 stared complete with a rating including providing of hold fast in wall and PVC connection 45 cm long with 15 mm dia brass union at both end heavy duty complete all as specified and directed by Engr-in-charge. Make:- Havells/ Bajaj /CG.
Gupta Automobiles
Manglam Engineers and Construction Co
vibha associates
AMBEY CONSTRUCTION
MEEFIN ELECTRONICS
SA construction co.
M/S AMAR ELEKTRO CENTRE
mohanlal gupta
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .