PROVN OF GATE WITH RCC PILLAR AND CONNECTED ITEMS NEAR OP-2 AT COD AND PROVN OF SOLAR LIGHT ON THE ROADS OF ADM AREA OF 506 ABW JABALPUR UNDER AGE B/R-II AND AGE E/M OF GE (EAST) JABALPUR

Amount

Supply and fixing solar led light fitting 15-16 watt with high efficiency All-In-one Solar Street light mono crystailine solar pv module,Lithium ferro phosphate battery with inbuilt Bms Technology with motion sensor for outdoor , High efficency Led ,MPPT charge controller and aluminium extruded body specially designed by progressive intelligent dimming which automatically control the dimming and brightness of light to enhance the backup, battery capacity 12 v 24AH, IP 66 Temp-5700-6000k completed all as directed. BAJAJ CAT:-15W - SOLAR BSZSL 15W LED AIOSL- LiFePo4 Or equivalent Philips,Wipro including Pole for 25 Watt Solar all in one to install light Height of pole 7mtr high hot dip galvanised octagonal poles with 70mm bottom A/F & 155 mm top A/F made up of 3mm thk. HT sheet alongwith base plate of size 220X220X16mm thk. Without Bakelite Sheet - JB Arrangements along with 4 nos of M24x750 MM Long J type EN 8 grade foundation bolts along with template. Make:- BAJAJ/PHILIPS/HAVELLS/WIPRO. Note : The contractor will submit the LM-80 and LM-79 report from manufacturer to Engineer-in-Charge before incorporation the items in work.

Supply and fixing solar led light fitting 18-20 watt with high efficiency All-In-one Solar Street light mono crystailine solar pv module,Lithium ferro phosphate battery with inbuilt Bms Technology with motion sensor for outdoor, High efficency Led,MPPT charge controller and aluminium extruded body specially designed by progressive intelligent dimming which automatically control the dimming and brightness of light to enhance the backup, battery capacity 12 v 24AH, IP 66 Temp-5700-6000k completed all as directed. BAJAJ CAT:-18W - SOLAR BSZSL 18W LED AIOSL- LiFePo4 - Or equivalent Philips,Wipro including Pole for 25 Watt Solar all in one to install light Height of pole 7mtr high hot dip galvanised octagonal poles with 70mm bottom A/F & 155 mm top A/F made up of 3mm thk. HT sheet alongwith base plate of size 220X220X16mm thk. Without Bakelite Sheet - JB Arrangements along with 4 nos of M24x750 MM Long J type EN 8 grade foundation bolts along with template.Make:- BAJAJ/PHILIPS/HAVELLS/WIPRO. Note : The contractor will submit the LM-80 and LM-79 report from manufacturer to Engineer-in-Charge before incorporation the items in work.

Supply and fixing solar led light fitting 24-25 watt with high efficiency All-In-one Solar Street light mono crystailine solar pv module,Lithium ferro phosphate battery with inbuilt Bms Technology with motion sensor for outdoor,High efficency Led,MPPT charge controller and aluminium extruded body specially designed by progressive intelligent dimming which automatically control the dimming and brightness of light to enhance the backup, battery capacity 12 v 24AH, IP 66 Temp-5700-6000k completed all as directed. BAJAJ CAT:-25W - SOLAR BSZSL 25W LED AIOSL- LiFePo4 - Or equivalent Philips,Wipro including Pole for 25 Watt Solar all in one to install light Height of pole 7mtr high hot dip galvanised octagonal poles with 70mm bottom A/F & 155 mm top A/F made up of 3mm thk. HT sheet alongwith base plate of size 220X220X16mm thk. Without Bakelite Sheet - JB Arrangements along with 4 nos of M24x750 MM Long J type EN 8 grade foundation bolts along with template. Make:- BAJAJ/PHILIPS/HAVELLS/WIPRO. Note : The contractor will submit the LM-80 and LM-79 report from manufacturer to Engineer-in-Charge before incorporation the items in work.

Supply and laying cable XLPE insulated screened PVC bedded, galvanised steel strip or wire, armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor 25 Sqmm 4 core complete all as specified and directed.

Excavation in trenches in soft loose soil including cutting road surfaces n.exc 1.5 mtr wide and n.exc. 1.5 mtr in depth for poles, stay, cable, pipe etc getting out all as specified.

Returning filling including spreading and well ramming in layers each n.exc 50 mtr thick in soft loose soil all as specified.

Removal of surplus/spoil on a distance n.exc 50 mtr thick in soft loose soil all as specified.

Supplying and laying un-reinforced precast concrete cable cover, class HVP, type 1 with peak, size 300mm x 180mm x 40mm laid in trenches for under ground cable all as specified.

M&L for Sand cushioning trenches using fine sand to under ground cable, laid in two layers 15cm before laying the cable & 8cm after laying the cable complete all as specified.

M&L for cable protection GI tubing light grade fixed long the pole/under road/along the wall of size 50 mm bore with necessary clamps all as directed.

M&L for crossarms in replacement , bracing, supports, clamps and brick plates, fabricated from staructural steel section including nut bolts washers including welding, bending , cold or hot drilling holes for bolts in any shape or size as indicated in drawings or as directed, including two coats of aluminium paint over a coat of red oxide all specified.

M&L for Providing PCC 1:3:6 type C:2 using 40mm graded crushed stone aggreate as in foundation for pole/stay assembly foundation coping of poles etc.

M&L for Providing PCC 1:4:8 type D:2 using 40mm graded crushed stone aggreate as in foundation for pole/stay assembly foundation coping of poles etc.

M&L for Earthing complete with galvanized steel earth plate electrods of size 60cmx60cmx6mm thick burried directly in ground vertically(earth pit not less than 3.35 mtr deep below normal ground level) with top edge of the plate not less than 2.75 mtr below normal ground level connected to galvanised iron strip 32 x 6 mm as earthing lead. by means of bolts nuts check nuts and GI washers of Galvanised iron protected by steel pipe 15mm (light grade) all as shown in elecrrical plate No.5 of SSR Part-I and connecting to earthing test point (earth test point to be provided at 5 mtr distance from earth pit) and testing on completion including necessary excavation and earth work. The rate also include charcoal dust and comman salt in alternate layers 25 mm dia light grade GI pipe,funnel,wire mesh.concrete 1:3:6 type C-1 for pit and RCC pit cover. PCC pit shall be provided 50 cm away from earth pit and not on the earth pit itself. The extra cost of the watering pipe,bends,elbows shall be included in the unit rate.Note : RCC pit cover shall be precast of RCC 1:2:4type B-1 80mm thick reinforced with XPM weighing not less than 4 Kg/Sqm.

M&L for RCC (1:2:4) type B-1 (using 20 mm aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; all as specfied and directed.

M&L for RCC (1:2:4) type B-1 (using 20 mm grade stone aggregate ) as in columns complete all as specified and directed .

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter.

Formwork to sides of pillars , columns , square , rectangular , polygonal , circular on plan rough finished surfaces of concrete completed all as specified and directed.

S&F Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-290(Gde E-165) complete all as specified and directed.

Ditto but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders as specified and directed.

M&L for three coats of white wash (lime) on newly plastered surfaces on wall including preparation of new plastered surfaces complete all as specified and directed.

S&F aluminium composite panel cladding with open grooves for linear as well as curvilinear portions of the building /wall for all heights and all levels etc including (a) Providing fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metallic color or as approved shades out of 2 mm thick aluminium composite panel material with core sandwiched between two Aluminium sheets (each 0.25 mm thick ) . The aluminium composite panel cladding sheet shall be oil coated with Kynar 500 based PVDF /Lumiflon based fluoropolymer resin coating of approved color and shade on face No.1 and polymer (service) coating on face No.2 as specified using stainless steel screws nuts bolts washer cleats weather silicone sealant backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 /MS with Hot clip Galvanized with serrations and serrated washers to arrest th wind load movement fasteners SS 316 pins and anchor bolts of approved make in SS 316 Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification of manufacturer complete all as directed.

S&F MS Framed work in doors & gates of angle or other section with gusset plates , rails , braces etc , complete , drilled for fixing of steel sheeting or other covering , doors , etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering , running rails and guides ) and hanging also fastening and fixing complete Fe 290 Gde E-165 complete all as specified and directed.

S& F Anodised aluminium frame for channel cleat angle or other section complete all as specified and directed.

M &L Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6).

M &L Rendering 15mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces , finished even and smooth without using extra cement.

M &L 10 mm thick cement plaster of mortar (1:4) for laying Wall Tiles.

15-18mm thick Granite (of any type) tiles machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and including cutting and polishing and fixing granite tiles with brass screws , etc. all complete as directed.

S&F stainless work in writing leters of any pattern , section and size of Grade -304 with and including stainless steel nut bolt/screw complete all as specified and directed.

Surface Excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/Loose soil.

M&L 100 mm thick PCC (1:4:8) type D-2 using (40 mm stone aggregate) as in subbase concrete complete all as specified and directed.

M&L PCC (1:3:6) Type C1 using 20 mm graded stone agg including all form etc as in copping /kerb etc.

S & F Rubber moulded casted Machin pressed precast concrete inter locking paver Block any shape and size Conf. to IS-15658-2006 of 60 mm thick M-30 grade with Topping with grey cement and pigment over 25 mm thick sand cussioning complete.

Maroom/red baji filling in floors or pavings, laid in layers n exc. 15 cm thick spread, leveleed and rammed including watering complete all as specified and directed.

Formwork to sides and soffits of floor or roofs beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams complete all as specified and directed.

M&L RCC type B1 (1:2:4) 20 mm aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span all as specified and directed.

M &L Boulder pitching grouted with cement and sand mortar 1:6, laid dry, hand packed tightly.

Applying two coats of synthetic enamel with one coat of primer of Red oxide on steell Surfaces of any description, over 10cm in width or girth,not otherwise described including preparation of new surface complete all as specified and directed.

Schedule of credit amount of Rs. -NIL- to be deducted during AOC

shri krishna traders

Goodluck Enterprises

LAL SINGH & SONS

Sachdeva Enterprises