Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.2 LAccepted-AOC | ₹27.2 L Quoted ₹27.8 L | L1 | Accepted-AOC L1 |
| 2 | L2₹33.4 LRejected-AOC 154 GANDHI MARKET AMBALA CANTT HARYANA 133001 | AMBALA | HARYANA | 133001 | ₹33.4 L | L2 | Rejected-AOC L2 |
| 3 | L3₹35.2 LRejected-AOC 186 GANDHI MARKET AMBALA CANTT 133001 | AMBALA CANTT | AMBALA | HARYANA | 133001 | ₹35.2 L | L3 | Rejected-AOC L3 |
| 4 | L4₹35.9 LRejected-AOC BOOTH NO 119 SECTOR 9 PANCHKULA 134109 HARYANA | PANCHKULA | PANCHKULA | HARYANA | 134109 | ₹35.9 L | L4 | Rejected-AOC L4 |
| 5 | L5₹36.6 LRejected-AOC H NO 597 SEONA ROAD RANJIT NAGAR PATIALA PB 147001 | PATIALA | PATIALA | PUNJAB | 147001 | ₹36.6 L | L5 | Rejected-AOC L5 |
| Sl No | Description | Qty | Unit | M/S Sonu Traders L3 | Jawandha Enterprises L5 | Arun enterprises L1 | Esha Engineers L2 | HARISH SALES CORPORATION L6 | bharat contrectors L7 | SHARMA ELECTRICAL ENGINEERS L4 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Supplying, installing, testing and commissioning of 415 Volts 3 Phase 4 Wire factory fabricated and tested all as per existing IEC 60439 Part 1, floor mounted, IP 55 grade, Outdoor double door Partially Type Tested Assembly Type (PTTA) Bus Coupler LT cubical panel made out of CRCA MS sheet duly powder coated with Seimens grey shade RAL 7032, dust and veremin proof with suitable size TPN PVC sleeved aluminium bus bar incld. angle iron base frame of suitable size. Panel should be mounted/grouted on 150 mm thick PCC (1:4:8) type D2 below nearest greound level and should be with 400 mm offsets on all 04 sides of the panel including dismantling of old unserviceable LT panel along with disconnecting connected cables, inclusive of following accessories fitted in panel :-
(A). INCOMING - (i) MCCB 200 Amps ,415 V 4 pole 36 KA 50 Hz with Ics =100% Icu & thermal magnetic adjustable type all as per including spreader terminals - set of 04 and direct rotary handle -01 No, Current transfomer 400/5A -01 Nos,Shunt Release as per OEM specifications - 01 Nos.
(B).BUSCOUPLER - (i) MCCB 200 Amps ,415 V 4 pole 36 KA 50 Hz with Ics =100% Icu & thermal magnetic adjustable type all as per including spreader terminals - set of 04 and direct rotary handle -01 No, Current transfomer 400/5A -01 Nos,Shunt Release as per OEM specifications - 01 Nos. | 1 | Each Job | 1,55,000 ₹1.6 L | 1,80,000 ₹1.8 L | 1,60,003 ₹1.6 L | 1,90,000 ₹1.9 L | 3,50,000 ₹3.5 L | 3,00,000 ₹3 L | 1,65,000 ₹1.6 L |
| 1.01(C). INTERLOCKING - (i). Electrical interlocking & Mech. - 02 No. all as approved by LT Panel OEM. (D). OUTGOING - (I) MCCB 160 Amps ,415 V 3 pole 36 KA 50 Hz with Ics =100% Icu & thermal magnetic adjustable , Microprocessor release type including spreader terminals - set of 04 and direct rotary handle -01No as per OEM specifications- 01Nos (ii) MCCB 63 Amps ,415 V 3 pole 16 KA 50 Hz with Ics =100% Icu & thermal magnetic adjustable type including spreader terminals - set of 04 and direct rotary handle -01No as per OEM specifications- 01 Nos (iii) MCB TPN 63 amps- 04 nos (iv) LED indicators - R/Y/B 240 V AC - 4 Nos. Per incoming & outgoing (v) Multifunction meter with accuracy Class 1.0, Flush mounting 96 x 96 mm, CT/PT site programmable for measurement of V, A, PF, kW, kVA, Load hours all as and including suitable size CTs (set of 3) - 02 No. (for Incoming feeder) (vi) Single function 3 phase LED voltmeter with accuracy Class 1.0, Flush mounting 96 x 96 mm, Input voltage measurement range 50-520 VAC (P-P), CT/PT site programmable all as per including suitable size CTs (set of 3) - 06 Nos. (Outgoing feeders) (vii) Single function 3 phase LED ammeter with accuracy Class 1.0, Flush mounting 96 x 96 mm, Input voltage measurement range 50-520 VAC (P-P), CT/PT site programmable all as per and including suitable size CTs (set of 3) - 06 Nos. (Outgoing feeders) (viii) MCB SP 'C' series 10kA 6-32 Amps as protection for LED lamps (01 No. each for set of 03 Nos. LED lamps, multifunction and single function meters) and multifunction meter - 6 Nos. (ix) Control wiring with suitable size PVC insulated single core copper conductor cable for LED lamps, MFMs, etc.2 | ||||||||||
| 2.00 | Supplying, installing, testing and commissioning of 415 Volts 3 Phase 4 Wire, 3.15 mm thick factory fabricated and tested all as per existing IEC 60439 Part 1, floor mounted, IP 55 grade, sheet Outdoor double door Partially Type Tested Assembly Type (PTTA) LT cubical panel made out of CRCA MS sheet duly powder coated with Seimens grey shade RAL 7032, dust and veremin proof with TPN PVC sleeved aluminium bus bar of size 250 Amps incld. angle iron base frame of suitable size. Including Panel mounted/grouted on 150 mm thick PCC (1:4:8) type D2 1 Mtr above ground level and with 500 mm offsets on all 04 sides of the panel complete and including spiral HDPE pipes for all cables under the PCC of panel,dismantling old unserviceable LT panel along with disconnecting connected cables and inclusive of following accessories fitted in panel :-
(A). INCOMING - (I) MCCB 160 Amps ,415 V 3 pole 36 KA 50 Hz with Ics =100% Icu & thermal magnetic adjustable , Microprocessor release type including spreader terminals - set of 04 and direct rotary handle -01No as per OEM specifications- 01Nos
(B). OUTGOING -
(i) MCCB 100 Amps ,415 V 3 pole 16KA 50 Hz with Ics =100% Icu & thermal magnetic adjustable type including spreader terminals - set of 04 and direct rotary handle -01No as per OEM specifications- 02 Nos
(ii) MCCB 63 Amps ,415 V 3 pole 16 KA 50 Hz with Ics =100% Icu & thermal magnetic adjustable type including spreader terminals - set of 04 and direct rotary handle -01No as per OEM specifications- 02 Nos
(ii) MCB SPN 32 Amp - 03 No.
(iv) Spare cubicles for expansion as per MCCB 4P Amps - 01 Nos.
(v) LED indicators - R/Y/B 240 V AC - 04 Sets of 03 Nos. per incoming & outgoing
(vi) Multifunction meter with accuracy Class 1.0, Flush mounting 96 x 96 mm, CT/PT site programmable for measurement of V, A, PF, kW, kVA, Load hours all as and including suitable size CTs (set of 3) - 01 No. (for Incoming feeder)
(vii) MCB SP 'C' series 10kA 60-32 Amps as protection for LED lamps (01 No. each for set of 03 Nos. LED lamps, multifunction and single function meters) and multifunction meter - 4 Nos.
(viii) Control wiring with suitable size PVC insulated single core copper conductor cable for LED lamps, MFMs, etc. | 1 | Each Job | 1,15,000 ₹1.1 L | 1,30,000 ₹1.3 L | 1,20,007 ₹1.2 L | 99,000 ₹99,000 | 1,90,000 ₹1.9 L | 3,00,000 ₹3 L | 1,20,000 ₹1.2 L |
| 3.00 | Material and labour for trenchless boring in any strata of soil across road, pavement,hardstanding etc upto depth as directed but not n,less than 0.60 mtrs below GL/road, pavement,hardstanding etc for laying of LT cable under road, pavement,hadrstanding without damaging existing under ground material complete all as specified and as directed. Note:- GI pipe shall be measured and paid separately under respective items of this schedule. | 50 | RM | 350 ₹17,500 | 500 ₹25,000 | 100 ₹5,000 | 200 ₹10,000 | 300 ₹15,000 | 300 ₹15,000 | 300 ₹15,000 |
| 4.00 | Material and labour for 50 mm bore galvanized steel tubing light garde (ISI marked) for protection of cable fixed to pole/walls or laid in floors, road and duct crossing with all necessary fittings and fittings and fixed with clamps, bolts, nuts and washers etc complete all as specified and as directed | 50 | RM | 300 ₹15,000 | 450 ₹22,500 | 154 ₹7,700 | 250 ₹12,500 | 200 ₹10,000 | 150 ₹7,500 | 290 ₹14,500 |
| 5.00 | Material and labour for 100 mm bore galvanized steel tubing light garde (ISI marked) for protection of cable fixed to pole/walls or laid in floors, road and duct crossing with all necessary fittings and fittings and fixed with clamps, bolts, nuts and washers etc complete all as specified and as directed | 60 | RM | 600 ₹36,000 | 800 ₹48,000 | 253 ₹15,180 | 400 ₹24,000 | 400 ₹24,000 | 300 ₹18,000 | 890 ₹53,400 |
| 6.00 | Dismantling concrete poles/ struts, any size complete all as specified and as directed | 25 | Each | 600 ₹15,000 | 500 ₹12,500 | 50.05 ₹1,251.25 | 300 ₹7,500 | 200 ₹5,000 | 1,000 ₹25,000 | 250 ₹6,250 |
| 7.00 | Dismantling of cross arms of MS channel or angle etc complete setting aside for reuse within 50 m or remove from site complete all as specified and as directed. | 1.5 | Qtl | 400 ₹600 | 1,000 ₹1,500 | 208 ₹312 | 100 ₹150 | 500 ₹750 | 1,000 ₹1,500 | 250 ₹375 |
| 8.00 | Dismantling insulators any type any size complete all as specified and as directed. | 75 | Each | 5 ₹375 | 50 ₹3,750 | 1 ₹75 | 10 ₹750 | 20 ₹1,500 | 100 ₹7,500 | 1 ₹75 |
| 9.00 | Dismantling stay assembly complete including demolition of concrete and excavation etc complete all as specified and as directed | 2 | Each set | 300 ₹600 | 500 ₹1,000 | 100 ₹200 | 200 ₹400 | 50 ₹100 | 100 ₹200 | 200 ₹400 |
Updated dates
Tender Value
₹44.9 L
EMD Value
₹89,700
Closing Date
17 Jan 2026, 6:00 pmClosed
HQ CWE PATIALA
HQ COMMANDER WORKS ENGINEER BLDG No 26 NEW LALBAGH PATIALA 147001 Contact 01712200082
SPECIAL REPAIR TO LT DISTRIBUTION NETWORK SYSYTEM FROM ESG TO RA and EA IN TECH AREA AT DAPPAR UNDER AGE (I) DAPPAR
2025_MES_745448_1
CWE/PAT/T-75/2025-26
Open Tender
Civil Works
180 days
AGE I DAPPAR
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
₹89,700
14 Feb 2026
20 Dec 2025
19 Jan 2026
20 Dec 2025
17 Jan 2026
3 Jan 2026
20 Dec 2025 - 30 Dec 2025
Supplying, installing, testing and commissioning of 415 Volts 3 Phase 4 Wire factory fabricated and tested all as per existing IEC 60439 Part 1, floor mounted, IP 55 grade, Outdoor double door Partially Type Tested Assembly Type (PTTA) Bus Coupler LT cubical panel made out of CRCA MS sheet duly powder coated with Seimens grey shade RAL 7032, dust and veremin proof with suitable size TPN PVC sleeved aluminium bus bar incld. angle iron base frame of suitable size. Panel should be mounted/grouted on 150 mm thick PCC (1:4:8) type D2 below nearest greound level and should be with 400 mm offsets on all 04 sides of the panel including dismantling of old unserviceable LT panel along with disconnecting connected cables, inclusive of following accessories fitted in panel :- (A). INCOMING - (i) MCCB 200 Amps ,415 V 4 pole 36 KA 50 Hz with Ics =100% Icu & thermal magnetic adjustable type all as per including spreader terminals - set of 04 and direct rotary handle -01 No, Current transfomer 400/5A -01 Nos,Shunt Release as per OEM specifications - 01 Nos. (B).BUSCOUPLER - (i) MCCB 200 Amps ,415 V 4 pole 36 KA 50 Hz with Ics =100% Icu & thermal magnetic adjustable type all as per including spreader terminals - set of 04 and direct rotary handle -01 No, Current transfomer 400/5A -01 Nos,Shunt Release as per OEM specifications - 01 Nos.
(C). INTERLOCKING - (i). Electrical interlocking & Mech. - 02 No. all as approved by LT Panel OEM. (D). OUTGOING - (I) MCCB 160 Amps ,415 V 3 pole 36 KA 50 Hz with Ics =100% Icu & thermal magnetic adjustable , Microprocessor release type including spreader terminals - set of 04 and direct rotary handle -01No as per OEM specifications- 01Nos (ii) MCCB 63 Amps ,415 V 3 pole 16 KA 50 Hz with Ics =100% Icu & thermal magnetic adjustable type including spreader terminals - set of 04 and direct rotary handle -01No as per OEM specifications- 01 Nos (iii) MCB TPN 63 amps- 04 nos (iv) LED indicators - R/Y/B 240 V AC - 4 Nos. Per incoming & outgoing (v) Multifunction meter with accuracy Class 1.0, Flush mounting 96 x 96 mm, CT/PT site programmable for measurement of V, A, PF, kW, kVA, Load hours all as and including suitable size CTs (set of 3) - 02 No. (for Incoming feeder) (vi) Single function 3 phase LED voltmeter with accuracy Class 1.0, Flush mounting 96 x 96 mm, Input voltage measurement range 50-520 VAC (P-P), CT/PT site programmable all as per including suitable size CTs (set of 3) - 06 Nos. (Outgoing feeders) (vii) Single function 3 phase LED ammeter with accuracy Class 1.0, Flush mounting 96 x 96 mm, Input voltage measurement range 50-520 VAC (P-P), CT/PT site programmable all as per and including suitable size CTs (set of 3) - 06 Nos. (Outgoing feeders) (viii) MCB SP 'C' series 10kA 6-32 Amps as protection for LED lamps (01 No. each for set of 03 Nos. LED lamps, multifunction and single function meters) and multifunction meter - 6 Nos. (ix) Control wiring with suitable size PVC insulated single core copper conductor cable for LED lamps, MFMs, etc.2
Material and labour for 50 mm bore galvanized steel tubing light garde (ISI marked) for protection of cable fixed to pole/walls or laid in floors, road and duct crossing with all necessary fittings and fittings and fixed with clamps, bolts, nuts and washers etc complete all as specified and as directed
itemH1Code8
itemH1Code11
itemH1Code12
itemH1Code13
itemH1Code15
itemH1Code16
itemH1Code18
itemH1Code19
itemH1Code20
itemH1Code21
itemH1Code22
itemH1Code23
itemH1Code24
itemH1Code25
itemH1Code30
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.60 MB
TENDER752526.pdf
Tender Documents • 1.55 MB
BOQ_834709.xls
BOQ • 0.49 MB
Download all tender documents and submit your bid