REPAIR TO HARD STANDING, PATH, DRAIN, CULVERT IN HALDIGHATI LINES AREA IN ZONE-III UNDER GE(S) JAIPUR AT JAIPUR MIL STN

Amount

Demolition PCC any description and any position not therwise specifically provided for complete all as specified and as directed by Engr-in-Charge

Demolition of stone boulder masonry built in cement mortar or cement lime mortar complete all as specified and as directed by Engr-in-Charge

Taking down cement or cement lime plaster, any description complete all as specified and as directed by Engr-in-Charge

M&L PCC Type C-2 (1:3:6) 40 mm graded stone aggregate in surfaces channel and drains complete all as specified and as directed by Engr-in-Charge

M&L for brick work with sub class B bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and as directed by Engr-in-Charge

M&L for rendering 15 mm th in CM 1:4 brick/concrete surfaces complete all as specified and as directed by Engr-in-Charge

Demolition PCC in ground floors above and pavings n exc 15 CM thickness (below above ground level) complete all as specified and as directed by Engr-in-Charge

M&L for hard core consisting of broken bricks of gauge nexc 63 mm, deposited spread leveled in layers nexc 25 cm complete all as specified and as directed by Engr-in-Charge

M&L for 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base to floor complete all as specified and as directed by Engr-in-Charge

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm tickness , M-35 grade, set, jointed over 25 mm thick sand cushoning complete all as specified and as directed by Engr-in-Charge

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed by Engr-in-Charge

M&L Chequered cement concrete tiles 20xcmx20cmx25mm thick , set , jointed and pointed in neat cement slurry in floor with grey cement and pigmentst to match complete all as specified and as directed by Engr-in-Charge

M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed by Engr-in-Charge

Dismantling stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and as directed by Engr-in-Charge

M&L Machine cut kota stone slab flooring 20-25 mm thick over 15 mm thick screed bed in CM (1:4) laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified and as directed by Engr-in-Charge

M&L Providing precast cement concrete louvres and jallies, 40 mm thick type B0 (12.5 mm crushed stone agggate ) set in CM 1:4 (measured solid), including all mouldings but excluding frame (Pre cast frame shall be measured separately and paid for under item 04032) complete all as specified and as directed by Engr-in-Charge

M&L for providing cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and othe similar bands, plinth courses, bed plates, copings, kneelers, apex stones, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork all as directed by Engineer-in-charge. complete all as specified and as directed by Engr-in-Charge

Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed by Engr-in-Charge

Extra only over item No. 18 above, for portions framed and hung as gates including pintle hinges,stops, hand-made sliding bolts etc all as specified.Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed by Engr-in-Charge

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed by Engr-in-Charge Note: INNER GIRTH ONLY MEASURED

Demolition of RCC as in Roofs, floors, beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed by Engr-in-Charge

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed by Engr-in-Charge

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed by Engr-in-Charge

S & F Mild steel bars TMT 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engr-in-Charge

Ditto all as per item no 24, but 6mm to 8mm dia. complete all as specified and as directed by Engr-in-Charge

M & L RCC 1:2:4 type B1 using 20mm graded stone aggregates as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engr-in-Charge

Dismantling of 200mm dia reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed by Engr-in-Charge

M & L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in 200mm dia pipes complete all as specified and as directed by Engr-in-Charge

M & L 200mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and as directed by Engr-in-Charge

Excavation in Post holes each not exc 0.5 cum getting out, in soft/ loose soil complete all as specified and as directed by Engr-in-Charge

M&L Plain cement concrete1:3:6 mix in foundation by using 40 mm gde stone agg as in, filling and mass concrete complete all as specified and as directed by Engr-in-Charge

S&F 65mm x 65mmx6mm MS Angle iron fencing posts or tee section fixed independently without connecting plates and similar works conforming to Fe-410-W (Gde-E-250) quality -A complete all as specified and as directed by Engr-in-Charge

M&L for preparation for new steel or iron surfaces of any description , not otherwise described ,exc 10 cm girth and applying two coat of synthetic enameled paint over a coat of red oxide primer complte all as specified and directed complete all as specified and as directed by Engr-in-Charge

M&L for Galvanised steel wire chain link fencing of 4 mm dia and 100x 100 mm mesh complete fixed to fencing post 2.4 mtr width rolls complete all as specified and directed by Engr in charge. Including removel /dismantling of old chain link fencing . complete all as specified and as directed by Engr-in-Charge

M&L MS flat iron 40mmx 6mm size fixed in fencing posts including 6 Nos of holes for fitting of nut and bolts complete all as specified and as directed by Engr-in-Charge

M&L nut and bolts hexagonal type of size 65 mm long and 12 mm dia complete complete all as specified and as directed by Engr-in-Charge

M&L MS round bars 10 mm dia as in Sag bars in chainlink fence cut to length bent to shape and making hooks complete all as specified and as directed by Engr-in-Charge

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed by Engr-in-Charge

UNIVERSAL INFRAPROJECT PVT LTD

J.J.ENGINEERING

JAGDAMBA CONSTRUCTION COMPANY

MSR INFRATECH

M/S Mohan Lal Gupta

Baradwal Construction Company

DEEPENDRA SINGH SHEKHAWAT