WBPWD/SSKM(H.)ESD/NIQ-166 of 2025-26

Part: A (Electrical Installation Work): Supply & Fixing 240 V, 20 A Piano key type switch (Make - Anchor) on sheet metal switch board incl. S&F 100x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Make: Havells/Gloster/Polycab/KEI) in 20mm size PVC rigid conduit 'FR' (Precision/Polycab make, HMS/MMS type) incl. necy. fittings as required 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC

S&F 250V 25A Timer controller for AC machine in SS double door (IP 42/43) 2+10-way DB enclosure (Make:- L&T/Schnider/ABB Elegance) with S&F following electrical accessories & front door locking arrangement with all connection by finishing the ends of 2x4 & 1x2.5 copper wire dowells solderless socket by crimping method as to GS earthing attachment on wall incl necessary connections as per direction of EIC :- i) 10kA, C-Curve, 240V, 25A DPMCB (LT/Schnider/ABB Elegance)- 1No ii) 24 Hr programmable Digital Timer (LT make cat no 67DDT0) - 1 No iii) 3 pole power contractor (LT make cat no MNX 22/230V) with 1 NO +1 NC additional contact block -- 2 sets iv) 2 Moduler AC motor stater (Make:- Legrand/Myrius) - 1 No. v) 2 Module plate with cover (Make :- Legrand/Myrius) -- 1 No vi) 20A Auto-Off-Bipass SPDT toggle switch (Approved/reputed make)- 2 Nos. vii) 10A SPST Moduler type switch (Make :- Legrand/Myrius) - 1 No. viii)Outgoing connector make ELMAX (Approved/reputed make) - 2 Nos (Single phase Twin timer)

Part: B (SITC of Airconditioning System): SITC of 2.0 Tr capacity type Split Air Conditioner of rated cooling capacity of 24000 BTU/hr. with 1 No. Rotary compressor, 1 no. IDU of rated power supply -230V-1ph-50Hz., 1 no. ODU of rated power supply - 230V, 1ph, 50Hz. Air-flow/per IDU:- 800CFM. (Make: O General/Mitshubishi Electric/or equivalent)

Supply, fabrication & fixing of 2 Nos. M.S Equal Angle of 6mm thick of Size (50mm X 50mm) of 1 m length for making platform for installation of outdoor unit of 2.0 Tr Split Air Conditioner incl. drilling 2 nos hole in each channel including making necessary guarding arrangement of outdoor unit as per site condition as per direction of EIC.

Supply & fixing of HVAC grade copper pipe of following sizes for liquid and gas line between ODU and IDU (Make - Ryoku/Nippon):-

(a) 5/8" (gas line).

(b) 1/4" (liquid line).

Supply & fixing of Nitril Rubber insulation for refrigerant copper pipe minimum thickness 9 mm. incl. all accessories as per direction of EIC. (Make - Supreme/Aroflex):-

(a) 5/8" (gas line).

(b) 1/4" (liquid line).

Supply & Laying of 3 core 2.5 sq.mm PVC insulated Copper Cable ("FRLSH") on wall incl. making connections as per direction of EIC.(As Control Cable from ODU to IDU ) ( Make : KEI/ Havells/ Polycab)

Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector,6 mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. With out angle iron support 100x50x1.25mm (18SWG)

Supply & laying of 25 mm dia PVC Drain Pipe (Medium) including S&F necessary fittings (Make: Supreme/ Oriplast/ Finolex)

Rates should be quoted inclusive of GST, LWC & all other related taxes & duties.

Please Enable Macros to View BoQ information